Search NASA⌕ Search

SEARCH · Search NASA

Results for “DATA SMOOTHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The Mars ancient cratered terrain, smooth plains boundary: Implications of Viking color data for evolution of the Amenthes Region

The global color set compiled by the Mars Consortium was investigated. The problem of application of the martian surface color data to geologic interpretation are atmospheric contributions which increase with latitude, and the high correlation among the three color bands. In southern Amenthes the classified units show areas of possible mixing between cratered tarrain and smooth plains. It is suggested that some geologically meaningful correlation exists between surface units and the transformed color data in the Amenthes region. The knobby terrain protruding through the plains units appears to be remnants of ancient cratered terrain extending northward beneath the more youthful smooth plains.

Maxwell, T. A.↗
NASA NTRS2008

Fatigue Behavior of a Third Generation PM Disk Superalloy

The fatigue behavior of a 3rd generation PM disk alloy, LSHR, was studied at 1300 F. Tensile, creep, and fatigue tests were run on smooth and notched (Kt = 2) bars under a variety of conditions. Analysis of smooth bar fatigue data, run under strain and load control with R ratios of 0 and -1, showed that a stress based Smith-Watson-Topper approach could collapse the data set. While the tensile and creep data showed substantial notch strengthening at 1300 F, the fatigue data showed a life deficit for the notch specimens. A viscoplastic finite element model, which accounted for stress relaxation at the notch tip, provided the best correlation between the notched and smooth bar behavior, although the fatigue data was not fully rationalized based on this simplified viscoplastic model of the stresses at the notch tip.Inclusion of a 90 sec dwell at peak load was found to dramatically decrease notch fatigue life. This result was shown to be consistent with a simple linear creep-fatigue damage rule, where creep damage dominated at low stresses and fatigue damage was more prevalent at higher stresses.

Gayda, John↗
NASA NTRS1978

The light curve at 10 microns of Algol near secondary minimum

Observations of Algol (Beta Persei) at 10 microns are presented which are of relevance to the system's behavior around the time of its secondary minimum. No evidence is found for a significant excess at 10 microns. The data show a smooth decline by 0.3 mag which starts at about phase 0.42, while the limited data obtained at phases greater than 0.50 are consistent with a symmetrical curve about phase 0.50.

Nadeau, D.↗
NASA NTRS1996

Development of a material property database on selected ceramic matrix composite materials

Ceramic Matrix Composites, with fiber/whisker/particulate reinforcement, possess the attractive properties of ceramics such as high melting temperature, high strength and stiffness at high temperature, low density, excellent environmental resistance, combined with improved toughness and mechanical reliability. These unique properties have made these composites an enabling technology for thermomechanically demanding applications in high temperature, high stress and aggressive environments. On a broader scale, CMC's are anticipated to be applicable in aircraft propulsion, space propulsion, power and structures, in addition to ground based applications. However, it is also true that for any serious commitment of the material toward any of the intended critical thermo-mechanical applications to materialize, vigorous research has to be conducted for a thorough understanding of the mechanical and thermal behavior of CMC's. The high technology of CMC'S is far from being mature. In view of this growing need for CMC data, researchers all over the world have found themselves drawn into the characterization of CMC's such as C/SiC, SiC/SiC, SiC/Al203, SiC/Glass, SiC/C, SiC/Blackglas. A significant amount of data has been generated by the industries, national laboratories and educational institutions in the United States of America. NASA/Marshall Space Flight Center intends to collect the 'pedigreed' CMC data and store those in a CMC database within MAPTIS (Materials and Processes Technical Information System). The task of compilation of the CMC database is a monumental one and requires efforts in various directions. The project started in the form of a summer faculty fellowship in 1994 and has spilled into the months that followed and into the summer faculty fellowship of 1995 and has the prospect of continuing into the future for a healthy growth, which of course depends to a large extent on how fast CMC data are generated. The 10-week long summer fellowship has concentrated, basically, on establishing the procedure for a smooth transfer of data into a CMC database on MAPTIS which is a vital part of the following broader picture of the project.

Mahanta, Kamala↗
NASA NTRS1976

Reanalysis of the Apollo cosmic gamma-ray spectrum in the 0.3 to 10 MeV energy region

Additional data obtained from the Apollo-16 and -17 missions, together with collateral calculations on background radiation effects, have enabled an improved subtraction of unwanted backgrounds from the diffuse cosmic gamma-ray data previously reported from Apollo-15. As a result, the 1- to 10-MeV spectrum is lowered significantly and connects smoothly with recent data at other energies. The inflection reported previously is much less pronounced and has no more than a 1.5-sigma significance. Sky occultation by the Apollo-16 spacecraft shows the bulk of the 0.3- to 1-MeV radiation to be diffuse. The analysis of spurious backgrounds points to important improvements for future experiments designed for this spectral region.

Trombka, J. I.↗
NASA NTRS1977

Reanalysis of the Apollo cosmic gamma-ray spectrum in the 0.3 to 10 MeV energy region

Additional data obtained from the Apollo 16 and Apollo 17 missions, together with collateral calculations on background radiation effects, have made possible an improved subtraction of unwanted backgrounds from the diffuse cosmic gamma-ray data previously reported from Apollo 15. As a result, the 1- to 10-MeV spectrum is lowered significantly and connects smoothly with recent data at other energies. The inflection reported previously is much less pronounced and has no more than a 1.5-sigma significance. Sky occultation by the Apollo 16 spacecraft shows the bulk of the 0.3- to 1-MeV radiation to be diffuse. The analysis of spurious backgrounds points to important improvements for future experiments designed for this spectral region.

Trombka, J. I.↗
NASA NTRS1977

Reanalysis of the Apollo cosmic gamma-ray spectrum in the 0.3 to 10 MeV energy region

Additional data obtained from the Apollo 16 and 17 missions, together with collateral calculations on background radiation effects, have made possible an improved subtraction of unwanted backgrounds from the diffuse cosmic gamma ray data previously reported from Apollo 15. As a result, the 1 to 10 MeV spectrum is lowered significantly and connects smoothly with recent data at other energies. The inflection reported previously is much less pronounced and has no more than 1.5 sigma significance. Sky occultation by the Apollo 16 spacecraft shows the bulk of the 0.3 to 1 MeV radiation to be diffuse. The analysis of spurious backgrounds points to important improvements for future experiments designed for this spectral region. A light-weight satellite design can give a fourfold improvement in the signal to noise for such a measurement. Use of an anisotropic central crystal, which spins quickly compared with possible time variations in detector background, would enable sensitive limits to be set on galactic plane and point source contributions.

Dyer, C. S.↗
NASA NTRSDate not supplied

A Gaussian Process Enhancement to Linear Parameter Varying Models

Simulation and analysis for modern engineering systems now routinely requires the merging of multiple disciplines, physical-domains, time-scales, and data sets — all at ever increasing levels. These capabilities are especially needed in the domain of Advanced Air Mobility, where rapidly emerging vehicle designs are significantly more complex, while having to be both cost-effective and safe. To meet these engineering challenges, machine learning methods are an attractive option for merging models and data across multiple areas while providing uncertainty quantification and maintaining computational efficiency. This paper examines the use of Gaussian process machine learning to generalize and enhance the commonly used class of quasi-Linear Parameter Varying models for fast full-envelope simulation while also supporting control system design and analysis with model uncertainty. Gaussian process machine learning is selected because it: can fuse multiple data sets, enables an easy trade-off between data fitting and smoothing, provides model uncertainty quantification, scales well with increasing complexity, and does not generally require starting from a large training data set. To demonstrate the benefits of the approach, a robust stability analysis with Gaussian process uncertainty is shown for a NASA reference design of an electric quad-rotor air-taxi concept vehicle with motor parameter uncertainty.

Gaussian Process↗
NASA NTRS1982

Analysis of general-aviation accidents using ATC radar records

It is pointed out that general aviation aircraft usually do not carry flight recorders, and in accident investigations the only available data may come from the Air Traffic Control (ATC) records. A description is presented of a technique for deriving time-histories of aircraft motions from ATC radar records. The employed procedure involves a smoothing of the raw radar data. The smoothed results, in combination with other available information (meteorological data and aircraft aerodynamic data) are used to derive the expanded set of motion time-histories. Applications of the considered analytical methods are related to different types of aircraft, such as light piston-props, executive jets, and commuter turboprops, as well as different accident situations, such as takeoff, climb-out, icing, and deep stall.

Wingrove, R. C.↗
NASA NTRS1981

Recursive algorithms for two-dimensional smoothing using bicubic hermite polynomial

It is noted that in the past, smoothing splines originated from approximation theory have been successfully applied to data filtering and image smoothing problems. Even though the nonrecursive technique of smoothing splines gives an optimal solution, the amount of computation increases rapidly with the size of the two-dimensional data. A derivation is presented here of quarter-plane filtering algorithms that provide smoothed estimates of function values and their derivatives by fitting two-dimensional smoothing splines in a recursive manner. The derivation procedure sheds light on specific problems encountered in two-dimensional filtering problems. What is more, the amount of computation for this recursive processor increases only linearly with the size of the two-dimensional data. Because of certain approximations introduced in its derivation, this recursive processor becomes suboptimal.

Kim, C. S.↗
NASA NTRSDate not supplied

The Multiplatform Precipitation Feature (MPF) Database: Synthesizing Satellite and Ground-Based Precipitation and Lightning Datasets for Convective Studies

NASA’s Lightning Imaging Sensor (LIS) and the Global Precipitation Measurement (GPM) mission have contributed a wealth of data toward global lightning and precipitation studies, respectively. Combining lightning and precipitation datasets leverages their unique insights into deep convective processes that inform about characteristics of convection and its intensity. Recent efforts to synthesize the LIS and GPM datasets prepare the opportunity for unprecedented large-scale, value-added multiplatform analyses of convection. This data synthesis proof-of-concept study elaborates on the creation of a database of reflectivity-based multiplatform precipitation features (MPFs) that capture a combination of information extracted from spatiotemporally coincident lightning and precipitation data within individual storm features. The space-based GPM Dual-frequency Precipitation Radar (DPR) provides a record of precipitation data, while the GPM Validation Network (VN) additionally incorporates ground-based polarimetric Doppler radar data to provide microphysical and kinematic context to DPR data. The LIS instrument onboard the International Space Station has contributed lightning observations since 2017. MPFs encapsulating information from these datasets are created from isolated regions of filtered, smoothed DPR reflectivity data to which ellipses are fit. Each MPF includes feature location, size, and eccentricity information as well as summary reflectivity characteristics. They also include summaries of precipitation microphysics and derived three-dimensional wind available from ground-based radar data. LIS data provides standard lightning characteristics such as flash count and density to each MPF as well as other informative metrics such as flash area and radiance. Each MPF file includes information about the original data from which the MPF and its characteristics were determined, allowing end-user reconstruction of the ellipse and deeper “level I” analysis of captured data. This database of VN-LIS MPFs enables broad statistical analysis of the relationships between the microphysical, kinematic, and electrical properties of convection. Preliminary results from a demonstration of the database will be described as well as ongoing efforts and avenues for future work.

Lightning↗
NASA NTRS2015

Conflict Detection Performance Analysis for Function Allocation Using Time-Shifted Recorded Traffic Data

The performance of the conflict detection function in a separation assurance system is dependent on the content and quality of the data available to perform that function. Specifically, data quality and data content available to the conflict detection function have a direct impact on the accuracy of the prediction of an aircraft's future state or trajectory, which, in turn, impacts the ability to successfully anticipate potential losses of separation (detect future conflicts). Consequently, other separation assurance functions that rely on the conflict detection function - namely, conflict resolution - are prone to negative performance impacts. The many possible allocations and implementations of the conflict detection function between centralized and distributed systems drive the need to understand the key relationships that impact conflict detection performance, with respect to differences in data available. This paper presents the preliminary results of an analysis technique developed to investigate the impacts of data quality and data content on conflict detection performance. Flight track data recorded from a day of the National Airspace System is time-shifted to create conflicts not present in the un-shifted data. A methodology is used to smooth and filter the recorded data to eliminate sensor fusion noise, data drop-outs and other anomalies in the data. The metrics used to characterize conflict detection performance are presented and a set of preliminary results is discussed.

Guerreiro, Nelson M.↗
NASA NTRS1993

Rounded Approximate Step Functions For Interpolation

Rounded approximate step functions of form x(Sup m)/(x(Sup n) + 1) and 1/(x(Sup n) + 1) useful in interpolating between local steep slopes or abrupt changes in tabulated data varying more smoothly elsewhere. Used instead of polynomial curve fits. Interpolation formulas based on these functions implemented quickly and easily on computers. Used in real-time control computations to interpolate between tabulated data governing control responses.

Nunes, Arthur C., Jr.↗
NASA NTRS1999

Smagglce: Surface Modeling and Grid Generation for Iced Airfoils: Phase 1 Results

SmaggIce (Surface Modeling and Grid Generation for Iced Airfoils) is a software toolkit used in the process of aerodynamic performance prediction of iced airfoils with grid-based Computational Fluid Dynamics (CFD). It includes tools for data probing, boundary smoothing, domain decomposition, and structured grid generation and refinement. SmaggIce provides the underlying computations to perform these functions, a GUI (Graphical User Interface) to control and interact with those functions, and graphical displays of results, it is being developed at NASA Glenn Research Center. This paper discusses the overall design of SmaggIce as well as what has been implemented in Phase 1. Phase 1 results provide two types of software tools: interactive ice shape probing and interactive ice shape control. The ice shape probing tools will provide aircraft icing engineers and scientists with an interactive means to measure the physical characteristics of ice shapes. On the other hand, the ice shape control features of SmaggIce will allow engineers to examine input geometry data, correct or modify any deficiencies in the geometry, and perform controlled systematic smoothing to a level that will make the CFD process manageable.

Vickerman, Mary B.↗
NASA NTRS1992

Data reduction using cubic rational B-splines

A geometric method is proposed for fitting rational cubic B-spline curves to data that represent smooth curves including intersection or silhouette lines. The algorithm is based on the convex hull and the variation diminishing properties of Bezier/B-spline curves. The algorithm has the following structure: it tries to fit one Bezier segment to the entire data set and if it is impossible it subdivides the data set and reconsiders the subset. After accepting the subset the algorithm tries to find the longest run of points within a tolerance and then approximates this set with a Bezier cubic segment. The algorithm uses this procedure repeatedly to the rest of the data points until all points are fitted. It is concluded that the algorithm delivers fitting curves which approximate the data with high accuracy even in cases with large tolerances.

Chou, Jin J.↗
NASA NTRS1992

Friction-factor data for flat-plate tests of smooth and honeycomb surfaces

Friction factors for honeycomb surfaces were measured with a flat plate tester. The flat plate test apparatus was described and a method was discussed for determining the friction factor experimentally. The friction factor model was developed for the flat plate test based on the Fanno Line Flow. The comparisons of the friction factor were plotted for smooth surfaces and six-honeycomb surfaces with three-clearances, 6.9 bar to 17.9 bar range of inlet pressures, and 5,000 to 100,000 range of the Reynolds number. The optimum geometries for the maximum friction factor were found as a function of cell width to cell depth and cell width to clearance ratios.

Ha, T. W.↗
NASA NTRS1990

Turbulence measurements using tethered balloon instrumentation during FIRE 1987

As part of the surface-based observations conducted on San Nicolas Island, the U.K. Meteorological Office operated a set of turbulence probes attached to a balloon tether cable. Typically six probes were used, each capable of measuring momentum, heat, and humidity fluxes. Two probes were fitted with net radiometers, one positioned above cloud and the other below; a third probe carried a Lyman-alpha hygrometer fitted with a pre-heater for the measurement of total water content. Some preliminary results are presented from the 14th July describing the variation in structure of the cloudy boundary layer during the daytime. This day was characterized by a complete cloud cover, an inversion height of approximately 600 m. and north-westerly winds of approximately 6 m.s(-1). As an illustration the equivalent potential temperature derived from a profile ascent made between approximately 0830 and 0930 (PDT) is shown. The data has been smoothed to a height resolution of about 4 metres. At this time the cloud base was approximately 200 m. and very light drizzle was reaching the surface. The vertical velocity variance and potential temperature flux for two periods are shown; the first (shown by full lines) immediately follows the profile and the second (shown by dashed lines) is central around 1400 (PDT). The data have been normalized by their maximum values in the first period. Cloud base has now risen to approximately 300 m. There is a marked variation during the morning, particularly in sigma w. The net radiative flux above cloud top has by now reached its maximum value.

Hignett, Phillip↗
NASA NTRS1972

Bayesian recursive image estimation.

The enhancement of images that are characterized only by statistical data where the picture contains additive noise is considered. The random process representing the output of the scanner is characterized by the output of a dynamic system with white noise input. The dynamic system describes a first-order vector-Markov process. The procedure of Kalman filtering is then utilized to recursively determine the minimum mean-square error estimate of the image. The result is then extended to obtain the smoothing of the data.

Nahi, N. E.↗