Search NASA⌕ Search

SEARCH · Search NASA

Results for “DEMAGNETIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Beyond a phenomenological description of magnetostriction

Magnetostriction, the strain induced by a change in magnetization, is a universal effect in magnetic materials. Owing to the difficulty in unraveling its microscopic origin, it has been largely treated phenomenologically. Here in this paper, we show how the source of magnetostriction—the underlying magnetoelastic stress—can be separated in the time domain, opening the door for an atomistic understanding. X-ray and electron diffraction are used to separate the sub-picosecond spin and lattice responses of FePt nanoparticles. Following excitation with a 50-fs laser pulse, time-resolved X-ray diffraction demonstrates that magnetic order is lost within the nanoparticles with a time constant of 146 fs. Ultrafast electron diffraction reveals that this demagnetization is followed by an anisotropic, three-dimensional lattice motion. Analysis of the size, speed, and symmetry of the lattice motion, together with ab initio calculations accounting for the stresses due to electrons and phonons, allow us to reveal the magnetoelastic stress generated by demagnetization.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Unraveling thickness-dependent spin relaxation in colossal magnetoresistance manganite films

In this paper, we used ultrafast optical spectroscopy to study photoinduced spin relaxation in 10–100 nm thick La 0.7 Ca 0.3 MnO 3 films. The spin-lattice relaxation time displays a strong dependence on thickness below the Curie temperature. Our simulations show that the observed thickness-dependent relaxation results from much faster thermal decay through the substrate in thinner films that leads to artificially faster demagnetization. Furthermore, we provide an analytical approach to gain insight into the spin-lattice relaxation time for highly thermal dissipative films. Finally, our study strongly suggests that careful consideration of the influence of transient thermal variations on photoinduced demagnetization is mandatory when incorporating absorbing thin magnetic films into heterostructures and devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

X-ray detection of ultrashort spin current pulses in synthetic antiferromagnets

Here, we explore the ultrafast generation of spin currents in magnetic multilayer samples by applying fs laser pulses to one layer and measuring the magnetic response in the other layer by element-resolved x-ray spectroscopy. In Ni(5 nm)/Ru(2 nm)/Fe(4 nm), the Ni and Fe magnetization directions couple antiferromagnetically due to the Ruderman–Kittel–Kasuya–Yosida interaction but may be oriented parallel through an applied magnetic field. After exciting the top Ni layer with a fs laser pulse, we also find that the Fe layer underneath demagnetizes, with a 4.1±1.9% amplitude difference between parallel and antiparallel orientation of the Ni and Fe magnetizations. We attribute this difference to the influence of a spin current generated by the fs laser pulse that transfers angular momentum from the Ni into the Fe layer. Our results confirm that superdiffusive spin transport plays a role in determining the sub-ps demagnetization dynamics of synthetic antiferromagnetic layers, but also evidence large depolarization effects due to hot electron dynamics, which are independent of the relative alignment of the magnetization in Ni and Fe.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Temperature dependent inverse spin Hall effect in Co/Pt spintronic emitters

In bilayers of ferromagnets and heavy metals, which form the so-called spintronic emitters, the phenomena of ultrafast demagnetization and the inverse spin Hall effect (ISHE) conspire to yield remarkably efficient emission of electric pulses in the THz band. Light-induced demagnetization of the ferromagnet launches a pulse of spin current into the heavy metal, wherein it bifurcates into a radiative charge transient due to the ISHE. The influence of temperature on this combined effect should depend on both the magnetic phase diagram and the microscopic origin of spin Hall conductivity, but its exact dependence remains to be clarified. Here, we experimentally study the temperature dependence of an archetypal spintronic emitter, the Co/Pt bilayer, using electro-optic sampling of the emitted THz pulses in the time domain. The emission amplitude is attenuated with decreasing temperature, consistent with an inverse spin Hall effect in platinum of predominantly intrinsic origin.

Physics↗
DOE OSTI2026

Correlation of coercivity, microstructure, and surface defects in HDDR-processed Nd-Fe-B powders for bonded magnet applications

Hydrogenation-Disproportionation-Desorption-Recombination (HDDR) is an effective method for producing high coercivity, anisotropic powder from either fresh Nd-Fe-B alloy or recycled Nd-Fe-B magnets for use in bonded magnets. We investigated the impact of surface defects on the coercivity of HDDR-processed Nd-Fe-B using scanning electron microscopy (SEM), magnetic measurements, and micromagnetic simulations. We observed that coercivity decreases as particle size reduces, with SEM revealing surface defects and the detachment of Nd 2 Fe 14 B grains and Nd-rich phases from the particle surface. Micromagnetic simulations indicate that demagnetization initiates at the particle surface, where these defects are most concentrated, leading to reduced coercivity. The reduction in squareness of demagnetization curve, knee point field and coercivity for smaller HDDR particles is attributed to an increased specific surface area, which exhibits reduced nucleation field and weak domain wall pinning field during magnetization reversal. By addressing the role of surface defects in coercivity degradation, this study provides insights for improving both new powder production and recycling strategies, ultimately leading to enhanced performance of bonded magnets and contributing to more sustainable practices in the rare earth supply chain. One potential strategy to enhance the performance of HDDR Nd-Fe-B materials involves reducing the fraction of fine particles ($<$35 µm) and promoting the formation of grain boundary phases on particle surfaces.

Liu, Xubo B. [Ames Laboratory (AMES), Ames, IA (Un↗
DOE OSTI2018

Revealing the Nature of the Ultrafast Magnetic Phase Transition in Ni by Correlating Extreme Ultraviolet Magneto-Optic and Photoemission Spectroscopies

By correlating time- and angle-resolved photoemission and time-resolved transverse- magnetooptical Kerr effect measurements, both at extreme ultraviolet wavelengths, we uncover the universal nature of the ultrafast photoinduced magnetic phase transition in Ni. This allows us to explain the ultrafast magnetic response of Ni at all laser fluences - from a small reduction of the magnetization at low laser fluences, to complete quenching at high laser fluences. In this work, both probe methods exhibit the same demagnetization and recovery timescales. The spin system absorbs the energy required to proceed through a magnetic phase transition within 20 fs after the peak of the pump pulse. However, the spectroscopic signatures of demagnetization of the material appear only after ≈ 200 fs, and subsequent recovery of the magnetization on timescales ranging from 500 fs to >70 ps. We also provide evidence of two competing channels with two distinct timescales in the recovery process, that suggest the presence of coexisting phases in the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Bloch Chirality Induced by an Interlayer Dzyaloshinskii-Moriya Interaction in Ferromagnetic Multilayers

Chiral spin textures stabilized by the interfacial Dzyaloshinkii-Moriya interaction, such as skyrmions and homochiral domain walls, have been shown to exhibit qualities that make them attractive for their incorporation in a variety of spintronic devices. However, for thicker multilayer films, mixed textures occur in which an achiral Bloch component coexists with a chiral Néel component of the domain wall to reduce the demagnetization field at the film surface. We show that an interlayer Dzyaloshinkii-Moriya interaction can break the degeneracy between Bloch chiralities. We further find large population asymmetries and chiral branching in the Bloch component of the domain walls in well-ordered Co/Pd multilayers. This asymmetry is a result of the combined effect of the demagnetization field and an interlayer Dzyaloshinkii-Moriya interaction, and is strongly related to film thickness and structural ordering. This work paves the way toward the utilization of this effect toward controlling Bloch chirality in magnetic multilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Field-Tunable Interactions and Frustration in Underlayer-Mediated Artificial Spin Ice

We report that artificial spin ice systems have opened experimental windows into a range of model magnetic systems through the control of interactions among nanomagnet moments. This control has previously been enabled by altering the nanomagnet size and the geometry of their placement. Here we demonstrate that the interactions in artificial spin ice can be further controlled by including a soft ferromagnetic underlayer below the moments. Such a substrate also breaks the symmetry in the array when magnetized, introducing a directional component to the correlations. Using spatially resolved magneto-optical Kerr effect microscopy to image the demagnetized ground states, we show that the correlation of the demagnetized states depends on the direction of the underlayer magnetization. Further, the relative interaction strength of nearest and next-nearest neighbors varies significantly with the array geometry. We exploit this feature to induce frustration in an inherently unfrustrated square lattice geometry, demonstrating new possibilities for effective geometries in two-dimensional nanomagnetic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Distinguishing surface and bulk electromagnetism via their dynamics in an intrinsic magnetic topological insulator

The indirect exchange interaction between local magnetic moments via surface electrons has been long predicted to bolster the surface ferromagnetism in magnetic topological insulators (MTIs), which facilitates the quantum anomalous Hall effect. This unconventional effect is critical to determining the operating temperatures of future topotronic devices. However, the experimental confirmation of this mechanism remains elusive, especially in intrinsic MTIs. Here, we combine time-resolved photoemission spectroscopy with time-resolved magneto-optical Kerr effect measurements to elucidate the unique electromagnetism at the surface of an intrinsic MTI MnBi 2 Te 4 . Theoretical modeling based on 2D Ruderman-Kittel-Kasuya-Yosida interactions captures the initial quenching of a surface-rooted exchange gap within a factor of two but overestimates the bulk demagnetization by one order of magnitude. This mechanism directly explains the sizable gap in the quasi-2D electronic state and the nonzero residual magnetization in even-layer MnBi 2 Te 4 . Furthermore, it leads to efficient light-induced demagnetization comparable to state-of-the-art magnetophotonic crystals, promising an effective manipulation of magnetism and topological orders for future topotronics.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2014

Radiation Damage Studies of Materials and Electronic Devices Using Hadrons

We have irradiated NdFeB permanent magnet samples from different manufacturers and with differing values of coercivity and remanence using stepped doses of 1 MeV equivalent neutrons up to a fluence of 0:64 1015n=cm2 to evaluate effects on magnetization and B field distributions. The samples with high coercivity, irradiated in open circuit configurations, showed no or minimal effects when compared with unirradiated samples, whereas the lower coercivity magnets suffered significant losses of magnetization and changes in the shapes of their field patterns. One such magnet underwent a fractional magnetization loss of 13.1% after a fluence of 0:59 1015 n=cm2. This demagnetization was not uniform. With increasing fluence, B field scans along the centerlines of the pole faces revealed that the normal component of B decreased more near the midpoint of the scan than near the ends. In addition, a fit to the curve of overall magnetization loss with fluence showed a significant deviation from linearity. The results are discussed in light of other measurements and theory. The high coercivity materials appear suitable for use in accelerator applications subject to irradiation by fast neutrons such as dipoles where the internal demagnetizing field is comparable to or less than that of the open circuit samples tested in this study.

Pellett, David↗
NASA NTRS1972

Particle shape and magnetization of chondrite meteorites, lunar samples, and impactites

Extra terrestrial materials, certain materials which have their origin at the earth's surface due to meteoritic impact, or under highly reducing conditions, such as in the case of basaltic flows in contact with coal beds or serpentenites, all contain Fe and FeNi phases with high magnetization values and spherical shape. Normally, the demagnetizing field (H sub D = NI sub S: where N is the demagnetizing factor and I is the saturation magnetization) is corrected for. In disperse systems, such as most natural materials, the particle shape effects are analyzed in terms of the saturation fields, Hs = H sub D = NI sub S and the magnetization differences (Delta I sub S). Discrete size modes of superparamagnetic (SP), multidomain (MD), and single domain (SD) particles result in reduced coercive force (Hc), increase in the value R sub H (ratio of remanent coercive force, H sub R, to H sub C), and decrease in the value R sub I (ratio of remanent magnetization, I sub R, to saturation magnetization, T sub S). The main distinctions between the various natural materials can be made by this approach. Hysteresis loops for terrestrial basalts, Fe and Ni rods and spheres, chondrite meteorites, lunar samples, impactites, and chondritic fusion crust are presented.

Wasilewski, P.↗
NASA NTRS1973

Magnetic properties and granulometry of metallic iron in lunar breccia 14313

Based on a detailed study of time-dependent or viscous remanence (VRM), thermoremanence (TRM) and magnetic granulometry of soil breccia 14313, single-domain particles of iron 100 to 200 A in size are proposed as the major carriers of natural remanence (NRM) in this rock. The VRM of 14313 is unusually intense and exhibits a logarithmic time decrease of VRM which ceases fairly abruptly after a time about equal to the original exposure to the field. The partial TRM spectrum reveals both a high-blocking-temperature fraction, scarcely affected by AF demagnetization to 1000 Oe, and an unusual concentration of blocking temperatures just above room temperature. The former fraction would contribute a very hard and stable component to any NRM of lunar origin, but the latter fraction, which accounts for the pronounced VRM of 14313 and undoubtedly has imparted a large viscous NRM component in the earth's field, is also surprisingly hard. A substantial portion (20 to 40%) is not demagnetized by an 800-Oe field.

Dunlop, D. J.↗
NASA NTRS1974

The paleomagnetic record in carbonaceous chondrites - Natural remanence and magnetic properties

Recent results of an intensive study of the natural remanence (NRM) and the magnetic properties of carbonaceous chondrites (CC) are summarized. It is convincingly demonstrated that the record of ancient magnetic fields has been preserved in these least-altered old samples of solar system material known. Intensities of specific NRM in the 13 meteorites surveyed span a broad range of values from 0.00005 to 0.5 emu/g. A low-temperature cleaning technique, based on the memory effect in magnetite grains, was followed by alternating field (af) demagnetization of the residual memory to exhibit the relative stability of NRM in the CC studied. No systematic correlation was found of either intensity or stability of NRM to af demagnetization with petrologic subtype, beyond a trend of increasing stability of memory from petrologic subtype C2 to subtype C4. The intensity and stability behavior of the saturation remanence are better suited for use in a magnetic classification of CC.

Brecher, A.↗
NASA NTRS1974

Magnetism in meteorites

An overview of this subject is presented. The paper includes a glossary of magnetism terminology and a discussion of magnetic techniques used in meteorite research. These techniques comprise thermomagnetic analysis, alternating field demagnetization, thermal demagnetization, magnetic anisotropy, low-temperature cycling, and coercive forces, with emphasis on the first method. Limitations on the validity of paleointensity determinations are also discussed.

Herndon, J. M.↗
NASA NTRS1978

Evidence for a primordial magnetic field during the meteorite parent body era

Data on 247 meteorites were examined, and a log-log plot of the magnetic moment/gm versus the susceptibility/gm reveals a straight-line relation with a slope of unity for a range of meteorite types extending from achondrites at the low Fe-Ni end to stony-irons. The relation holds for a span of parameter values ranging between four and five orders. The results support the hypothesis of a common background magnetic field at the time of meteorite formation. An equation relating the primordial field strength to the average carrier demagnetization factor, which can vary from 0 to 4 pi, is presented. The extreme lower limit for the field strength is 0.02 oersted, while for the mean field of 0.27 oersted determined from a study of individual meteorites (Stacy and Banerjee, 1974), the average value for the carrier demagnetization factor is 0.74, corresponding to elongated grains.

Sonett, C. P.↗
NASA NTRS1990

Measurement of H(sub c1) in a single crystal of YBa2Cu3O7 with low pinning

The measurement of H(sub c1) in barium yttrium copper oxide (BYCO) is often ambiguous because the presence of large pinning forces makes it difficult to discern exactly where the first deviation from linearity occurs. In addition there are complications because demagnetizing factors are often not well known. By utilizing a single crystal of YBCO with a nearly cubic shape, the uncertainty in the demagnetizing factor was minimized. In addition, the crystal used exhibited a very small amount of pinning with H applied perpendicular to the c axis, and a sharp break in the initial magnetization vs. field curve could be observed over a wide range of temperature. This allowed a precise determination of H(sub c1). The measured values of H(sub c1) could be well described by the Abrikosov relation with a Ginzburg-Landau parameter which varied linearly with temperature.

Kaiser, D. L.↗
NASA NTRS1991

Makeup and uses of a basic magnet laboratory for characterizing high-temperature permanent magnets

A set of instrumentation for making basic magnetic measurements was assembled in order to characterize high intrinsic coercivity, rare earth permanent magnets with respect to short term demagnetization resistance and long term aging at temperatures up to 300 C. The major specialized components of this set consist of a 13 T peak field, capacitor discharge pulse magnetizer; a 10 in. pole size, variable gap electromagnet; a temperature controlled oven equipped with iron cobalt pole piece extensions and a removable paddle that carries the magnetization and field sensing coils; associated electronic integrators; and sensor standards for field intensity H and magnetic moment M calibration. A 1 cm cubic magnet sample, carried by the paddle, fits snugly between the pole piece extensions within the electrically heated aluminum oven, where fields up to 3.2 T can be applied by the electromagnet at temperatures up to 300 C. A sample set of demagnetization data for the high energy Sm2Co17 type of magnet is given for temperatures up to 300 C. These data are reduced to the temperature dependence of the M-H knee field and of the field for a given magnetic induction swing, and they are interpreted to show the limits of safe operation.

Niedra, Janis M.↗
NASA NTRS1992

A broadband THz receiver for low background space applications

We have developed a sensitive bolometric receiver for low background space applications. In a 10 percent bandwidth at 1 THz, this receiver is approximately 100 times more sensitive than a quantum limited heterodyne receiver with a 1 GHz IF bandwidth. This receiver is designed to be used for the long wavelength band (200-700 microns) in the MIPS instrument on NASA's SIRTF satellite. The bolometers are cooled to 100 mK by an adiabatic demagnetization refrigerator. Roughly 60 g of cesium chrome alum salt is partially demagnetized to 100 mK, followed by a slow regulated downramp to compensate for the heat leak. The hold time of the ADR system is about 18 hours with a temperature stability of delta T(sub rms) approx. equals 10 micro-K. The composite bolometers have electrical responsivities of 10(exp 9)V/W and electrical NEP's of about 3x10(exp -17) W/square root of Hz. The bolometer signals are read out by JFET preamplifiers located on the helium plate and operated at 120 K. We have addressed a number of space qualification issues, such as the development of an analog magnet controller, construction of a cryogenic shake-table for bolometers and selection of the paramagnetic salt CCA which can survive a bakeout at 50 C. The receiver is scheduled to be flown in the spring of 1992 on a balloon telescope. This flight has a dual purpose. One is to provide realistic test of the capabilities of the new receiver. The other is to search for anisotropies in the cosmic microwave background on scales of a few degrees.

Hagmann, C.↗