Search NASA⌕ Search

SEARCH · Search NASA

Results for “DFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

An OFDM System Using Polyphase Filter and DFT Architecture for Very High Data Rate Applications

This paper presents a conceptual architectural design of a four-channel Orthogonal Frequency Division Multiplexing (OFDM) system with an aggregate information throughput of 622 megabits per second (Mbps). Primary emphasis is placed on the generation and detection of the composite waveform using polyphase filter and Discrete Fourier Transform (DFT) approaches to digitally stack and bandlimit the individual carriers. The four-channel approach enables the implementation of a system that can be both power and bandwidth efficient, yet enough parallelism exists to meet higher data rate goals. It also enables a DC power efficient transmitter that is suitable for on-board satellite systems, and a moderately complex receiver that is suitable for low-cost ground terminals. The major advantage of the system as compared to a single channel system is lower complexity and DC power consumption. This is because the highest sample rate is half that of the single channel system and synchronization can occur at most, depending on the synchronization technique, a quarter of the rate of a single channel system. The major disadvantage is the increased peak-to-average power ratio over the single channel system. Simulation results in a form of bit-error-rate (BER) curves are presented in this paper.

Kifle, Muli↗
NASA NTRS1995

Using Density Functional Theory (DFT) for the Calculation of Atomization Energies

The calculation of atomization energies using density functional theory (DFT), using the B3LYP hybrid functional, is reported. The sensitivity of the atomization energy to basis set is studied and compared with the coupled cluster singles and doubles approach with a perturbational estimate of the triples (CCSD(T)). Merging the B3LYP results with the G2(MP2) approach is also considered. It is found that replacing the geometry optimization and calculation of the zero-point energy by the analogous quantities computed using the B3LYP approach reduces the maximum error in the G2(MP2) approach. In addition to the 55 G2 atomization energies, some results for transition metal containing systems will also be presented.

Bauschlicher, Charles W., Jr.↗
DOE OSTI2024

DFT Calculation of Thermal Expansion within Debye-Grüneisen Framework Made Simple and Accurate

The density functional theory (DFT) based Debye-Grüneisen approach is a computational method used to calculate the thermodynamic properties of materials by relating the volume dependence of the Debye frequency to the Grüneisen parameter. In this study, we propose a new model to describe the volume dependence of the Grüneisen parameter. This model offers a simple yet accurate approach to predict the thermal expansion of materials within the framework of the Debye-Grüneisen theory. Specifically, for pure elements or species used as a reference system, we calibrated the parameters to reproduce the experimental coefficient of thermal expansion, heat capacity, and entropy. For compounds with arbitrary compositions, the parameters are determined by taking the arithmetic or geometric average of those obtained from the pure elements or species based on their composition. We then compared the model prediction with experiments. This allowed for a comprehensive characterization of the thermal expansion behavior of various materials.

Wang, Yi↗
DOE OSTI2020

Reduction of uranyl and uranyl-organic complexes mediated by magnetite and ilmenite: A combined electrochemical AFM and DFT study

Reduction of mobile aqueous uranyl complexes can be hindered by the strength of the uranyl-ligand complex and the resistivity of the complexes to electron transfer. Semiconducting solids, such as magnetite (Fe 3 O 4 ) and ilmenite (FeTiO 3 ), can facilitate otherwise-slow electron transfer between the reductant and oxidant, especially if these species are adsorbed on their surfaces as inner-sphere complexes. Electrons can then be shuttled through the surface or the structure. This process can be facilitated by either finding a new electron transfer path or by weakening or destroying the ligand-uranyl complex. Using in situ electrochemical atomic force microscopy (EC-AFM), we imaged reduction products of uranyl as mediated by magnetite and ilmenite in the absence or presence of the organic ligands, ethylenediaminetetraacetate (EDTA) and oxalate. In situ images of uranyl reduction show gradual nucleation and growth of reduced uranium on the mineral surfaces with decreasing reduction potentials. X-ray photoelectron spectroscopy (XPS) measurements indicate pentavalent uranium as the dominant uranium species resulting from uranyl reduction mediated by magnetite and ilmenite. The reduction potentials of uranyl-organic species relevant to our reaction system, (U VI O 2 ∙oxalate) 0 and (U VI O 2 ∙HEDTA) - , are derived using quantum–mechanical modeling and compared with the midpoint potentials obtained from cyclic voltammetry measurements. The spectroscopic, electrochemical, and computational data suggest that the catalysis of Fe-bearing minerals facilitates the reduction of uranyl-organic complexes. U(VI)-oxalate complexes are redox-active and participate directly in the reduction mediated by magnetite. In the presence of EDTA, reduction of uranyl may proceed in concert with ligand exchange between metals (i.e., U and Fe) on the mineral surface. Finally, the proposed mechanism is the breaking of uranyl-organic bonds upon interaction with the mineral surface followed by the formation of Fe-organic bonds, thereby allowing the reduction of hexavalent uranyl to pentavalent one.

58 GEOSCIENCES↗
DOE OSTI2022

In-situ synthesized N-doped ZnO for enhanced CO 2 sensing: Experiments and DFT calculations

Chemiresistive CO 2 sensing is attractive due to low cost and ease of chip-level integration. Our previous studies (Yong Xia, 2021) showed the well-developed ZnO material fabricated by in-situ annealing exhibited good CO 2 sensing performance. Here, we have expanded on those studies, including CO 2 cyclic tests under both dry air and N 2 background whereby a much higher response to CO 2 in N 2 background was observed. In this study, detailed density functional theory calculations were conducted to understand the behavior. The results indicated nitrogen doping is mainly responsible for the observed response. In the presence of pre-adsorbed O 2 , N-doped ZnO can no longer interact with CO 2 , which agrees well with the observation of higher response in N 2 background. Furthermore, density of states analysis showed N sp 2 hybridized orbital and N 2p orbital of the N dopant mixed with sp 2 hybridized orbital of C atom and 2p orbitals of C/O atoms in CO 2 to form σ and π bonds, respectively. However, they mixed with O 2s/2p orbitals of O atom in O 2 when pre-adsorbed O 2 was present, hindering CO 2 interaction with N-doped ZnO, and resulting in limited response in air. The illustrated mechanism does not only further the understanding of metal oxide-based CO 2 sensing, but also guide the design of new functional materials for CO 2 sensing or capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

First-principles DFT modeling of nitrobenzene adsorption on the Ag(111) surface at varying monolayer coverages

Here, the adsorption behavior of nitrobenzene on the Ag(111) surface as a function of coverage is investigated using density functional theory. Adsorption energies and optimized geometries are analyzed together with isolated intermolecular interaction calculations and electronic structure analysis, including Bader charge partitioning and projected density of states, to disentangle the roles of adsorbate–surface bonding and through-space adsorbate–adsorbate interactions. At low and intermediate coverages (θ = 1/9 and θ = 2/9), bidentate adsorption at top sites is favored due to strong adsorbate–surface interactions, with additional stabilization at θ = 2/9 arising from favorable intermolecular separations. At higher coverage (θ = 1/3), bidentate adsorption is destabilized by strong intermolecular repulsion, and monodentate adsorption becomes energetically preferred as rotational freedom allows more favorable intermolecular spacing. Charge density differences, Bader charge, and density of states analyses show that charge transfer from the Ag surface is localized primarily on the nitro group and increases with coverage and adsorption denticity, although this increase does not directly correlate with adsorption strength at high coverage due to competing intermolecular interactions. These results demonstrate that surface coverage can induce a transition in preferred adsorption denticity driven by intermolecular interactions, highlighting the importance of adsorbate packing in organic molecule adsorption at metal interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A DFT Comparison of C–C Reductive Coupling from Terminal Cyanido and Cyaphido Complexes of Nickel

The density functional theory study of the thermal C–C reductive coupling from terminal cyanido and hypothetical cyaphido complexes of [Ni(dmpe)] (dmpe = 1,2-bis(dimethylphosphino)ethane) revealed the key reaction intermediate in the reductive C–CP coupling being a σ-CC complex unlike an η 2 -aryl complex in the Ni C–CN system, as already observed in our previous studies. The reaction in THF is endothermic by 4.9 kcal/mol for cyanido with a 32.0 kcal/mol activation barrier and exothermic by 28.5 kcal/mol for cyaphido with an 11.3 kcal/mol activation barrier. To compare our results with the existing experimental data, we chose mesityl as the aryl group and also studied the CP reaction with [Pt(dmpe)] and [Pt(dmpm)] (dmpe = 1,2-bis(dimethylphosphino)methane) fragments. Our findings are consistent with the thermodynamically uphill photolytic C–CP bond activation in phosphaalkynes with Pt and a faster thermal back-reaction with [Pt(dmpe)] compared to that of [Pt(dmpm)]. Furthermore, based on the natural population analysis, when the polarity of the C–C bond is inverted, the sign of ΔG° is also inverted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO 2 Methanation on Cu-Cluster Decorated Zirconia Supports with Different Morphology: A Combined Experimental In Situ GIXANES/GISAXS, Ex Situ XPS and Theoretical DFT Study

We report that subnanometer copper tetramer-zirconia catalysts turn out to be highly efficient for CO 2 hydrogenation and its conversion to methane. The cluster size and substrate morphology are controlled to optimize the catalytic performance. The two types of zirconia supports investigated are prepared by atomic layer deposition (~ 3 nm thick film) and supersonic cluster beam deposition (nanostructured film, ~ 100 nm thick). The substrate plays a crucial role in determining the activity of the catalyst as well as its cyclability over repeated thermal ramps. A temperature-programmed reaction combined with in situ X-ray characterization reveals the correlation between the evolution in the oxidation state and catalytic activity. Ex situ photoelectron spectroscopy indicates Cu clusters with stronger interactions with the nanostructured film, which can be the cause for the higher activity of this catalyst. Density functional theory calculations based on the Cu 4 O 2 cluster supported on a ZrOx subunit reveal low activation barriers and provide mechanism for CO 2 hydrogenation and its conversion to methane. Altogether, the results show a new way to tune the catalytic activity of CO 2 hydrogenation catalysts through controlling the morphology of the support at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nuclear DFT analysis of electromagnetic moments in odd near doubly magic nuclei

We use the nuclear density functional theory to determine nuclear electric quadrupole and magnetic dipole moments in all one-particle and one-hole neighbours of eight doubly magic nuclei. We align angular momenta along the intrinsic axial-symmetry axis with broken time-reversal symmetry, which allows us to explore fully the self-consistent charge, spin, and current polarisation. Spectroscopic moments are determined for symmetry-restored wave functions and compared with available experimental data. We find that the obtained polarisations do not call for using quadrupole- or dipole-moment operators with effective charges or effective g-factors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Determining the Electronic Structure and Thermoelectric Properties of MoS 2 /MoSe 2 Type‐I Heterojunction by DFT and the Landauer Approach

Abstract The electronic structure and thermoelectric properties of MoX 2 (X = S, Se) Van der Waals heterojunctions are reported, with the intention of motivating the design of electronic devices using such materials. Calculations indicate the proposed heterojunctions are thermodynamically stable and present a band gap reduction from 1.8 eV to 0.8 eV. The latter effect is highly related to interactions between metallic d‐character orbitals and chalcogen p‐character orbitals. The theoretical approach allows to predict a transition from semiconducting to semi‐metallic behavior. The band alignment indicates a type‐I heterojunction and band offsets of 0.2 eV. Transport properties show clear n‐type nature and a high Seebeck coefficient at 300 K, along with conductivity values (σ/τ) in the order of 10 20 . Lastly, using the Landauer approach and ballistic transport, the proposed heterojunctions can be modeled as a channel material for a typical one‐gate transistor configuration predicting subthreshold values of ≈60 mV dec −1 and field–effect mobilities of ≈160 cm −2 V −1 s −1 .

López‐Galán, Oscar A.↗
DOE OSTI2024

Surface Segregation Studies in Ternary Noble Metal Alloys: Comparing DFT and Machine Learning with Experimental Data

Abstract Surface segregation, whereby the surface composition of an alloy differs systematically from the bulk, has historically been hard to study, because it requires experimental and modeling methods that span alloy composition space. In this work, we study surface segregation in catalytically relevant noble and platinum‐group metal alloys with a focus on three ternary systems: AgAuCu, AuCuPd, and CuPdPt. We develop a data set of 2478 fcc slabs with those compositions including all three low‐index crystallographic orientations relaxed with Density Functional Theory using the PBEsol functional with D3 dispersion corrections. We fine‐tune a machine learning model on this data and use the model in a series of 1800 Monte Carlo simulations spanning ternary composition space for each surface orientation and ternary chemical system. The results of these simulations are validated against prior experimental surface segregation data collected using composition spread alloy films for AgAuCu and AuCuPd. Our findings reveal that simulations conducted using the (110) orientation most closely match experimentally observed surface segregation trends, and while predicted trends qualitatively match observation, biases in the PBEsol functional limit numeric accuracy. This study advances understanding of surface segregation and the utility of computational studies and highlights the need for further improvements in simulation accuracy.

Chemistry↗
DOE OSTI2022

Magnetic exchange interactions in binuclear and tetranuclear iron(III) complexes described by spin‐flip DFT and Heisenberg effective Hamiltonians

Abstract Low‐energy spectra of single‐molecule magnets (SMMs) are often described by Heisenberg Hamiltonians. Within this formalism, exchange interactions between magnetic centers determine the ground‐state multiplicity and energy separation between the ground and excited states. In this contribution, we extract exchange coupling constants ( J ) for a set of iron (III) binuclear and tetranuclear complexes from all‐electron calculations using non‐collinear spin‐flip time‐dependent density functional theory (NC‐SF‐TDDFT). For 12 binuclear complexes with J ‐values ranging from −6 to −132 cm −1 , our benchmark calculations using the short‐range hybrid ω PBEh functional and 6‐31G(d,p) basis set agree well with the experimentally derived values (mean absolute error of 4.7 cm −1 ). For the tetranuclear SMMs, the computed J constants are within 6 cm −1 from the experimentally derived values. We explore the range of applicability of the Heisenberg model by analyzing bonding patterns in these Fe(III) complexes using natural orbitals (NO), their occupations, and the number of effectively unpaired electrons. The results illustrate the efficiency of the spin‐flip protocol for computing the exchange couplings and the utility of the NO analysis in assessing the validity of effective spin Hamiltonians.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hydrogen Bond Benchmark: Focal‐Point Analysis and Assessment of DFT Functionals

We performed a hierarchical, convergent ab initio benchmark study and systematically analyzed the performance of density functional approximations for describing hydrogen bonds in small neutral, cationic, and anionic complexes, as well as in larger systems involving amide, urea, deltamide, and squaramide moieties. Focal point analyses (FPA), extrapolating to the ab initio limit, were carried out using correlated wave function methods up to CCSDT(Q) for the small complexes and CCSD(T) for the larger systems, together with correlation-consistent Gaussian basis sets up to the complete basis set limit. Optimized geometries and vibrational frequencies were obtained at the CCSD(T) level. The resulting FPA hydrogen-bond energies converge within a few tenths of a kcal mol −1 . These reference data were used to evaluate 60 density functionals (including 12 dispersion-corrected), spanning the local-density approximation (LDA), generalized gradient approximations (GGAs), meta-GGAs, hybrids, meta-hybrids, double-hybrids, and range-separated hybrids. Overall, the meta-hybrid M06-2X provides the best performance for both hydrogen bond energies and geometries, while the dispersion-corrected GGAs BLYP-D3(BJ) and BLYP-D4 also yield accurate hydrogen-bond data and can serve as cost-effective options for studying large and complex systems.

coupled cluster theory↗
DOE OSTI2025

Glycerol Adsorption on TiO 2 Surfaces: A Systematic Periodic DFT Study

Abstract Conversion of glycerol to added‐value products is desirable due to its surplus during biodiesel synthesis. TiO 2 has been the most explored catalyst. We performed a systematic study of glycerol adsorption on anatase (101), anatase (001), and rutile (110) TiO 2 at the Density Functional Theory level. We found several adsorption modes on these surfaces, with anatase (101) being the less reactive one, leading to adsorption energies between −0.8 and −0.4 eV, with all adsorptions molecular in nature. On the contrary, anatase (001) is the most reactive surface, leading to both molecular and dissociative adsorption modes, with energies ranging from −4 to −1 eV and undergoing severe surface reconstructions in some cases. Rutile (110) also shows both molecular and dissociative adsorptions, but it is less reactive than anatase (001). Surfaces with oxygen vacancies affects the adsorbed states and energies. The electronic structure analysis reveals that glycerol adsorption mainly affects the band gap of the material and not the individual contributions to the valence and conduction band. Bader charge analysis shows that strong adsorption modes on anatase (001) and rutile (110) are associated with large charge transfer from glycerol to the surface, while weak and molecular adsorption modes involve low charge transfer.

Chemistry↗
DOE OSTI2020

Electronic structure and thermoelectric properties of CoAsSb with post-DFT approaches

Here, we study the electronic structure and thermoelectric properties of recently synthesized CoAsSb. The calculated bandgap becomes more accurate for increasingly-complex electronic structure methods: generalized gradient approximation, hybrid functionals, selfconsistent linearized quasiparticle GW method (LQSGW), and LQSGW with simplified vertex corrections. By equating the bandgaps of each method from a rigid shift of the bands, we evaluate the contributions made to thermoelectric properties beyond the bandgap. In doing so, we evaluate the efficacy of a commonpractice: a rigid shift applied to less-costly electronic structure methods in order to gain some accuracy of the more-costly methods. We find that while the shift made the Seebeck coefficients much closer to one another than from the original electronic structures, there remain differences in the Goldsmid-Sharp (thermoelectric) bandgap between the methods and from the intended electronic bandgap. Additionally, some lasting differences in temperature dependence remain between the methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Be Surface Structures on W(110) and W(211): A DFT Study

Beryllium and Tungsten are promising candidates for use as plasma facing materials (PFMs) in upcoming fusion reactors. Many complex and competing phenomena however complicate the understanding and development of materials that operate in the harsh conditions of the reactor. In particular, redeposition of Be onto the W divertor must be considered due to the expected erosion of the Be first wall under exposure to the plasma. It is known that a build up of Be on W allows for the formation of BeW alloys which can harm the longevity and performance of the fusion divertor. In an effort to understand the interaction of Be with W surfaces, a study of Be structures on W(110) and W(211) as a function of Be coverage has been carried out using Density Functional Theory. We have found that both W surfaces develop monolayers of Be characterized by a densely packed hexagonal structure. Below this monolayer coverage, Be structures are found to have two motifs of coverage, a densely packed hexagonal pattern punctuated by areas of low-density coverage. The structures found here produce work function values and trends in good agreement with experimental measurements.

36 MATERIALS SCIENCE↗