Search NASA⌕ Search

SEARCH · Search NASA

Results for “DI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Template directed reactions of 2-aminoadenylic acid derivatives

The template-directed oligomerization of activated derivatives of 2-aminoadenylic acid (paA) on polyuridylic acid (poly(U)) in aqueous buffers was studied. The reaction differs from that of adenylic acid (pA) under identical conditions, in that only di- and tri-nucleotides are observed as substantial products rather than a longer sequence of oligomers. The reaction of paA also differs from that of pA in that it does not require Mg (2+), and is less susceptible to increased temperature. The relevance of these observations to the chemical evolution of polynucleotide replication is discussed. Improved syntheses of paA and its diphosphate are reported.

Webb, T. R.↗
NASA NTRS1983

A two-pyroxene thermometer

Experimentally determined pyroxene phase relations at 800-1200 C are combined with calculated phase equilibria for the Di-En and Hd-Fs joins to yield a graphical two-pyroxene thermometer that should be suitable for a wide variety of rocks from the earth, the moon, and meteorites. The thermometer can be used directly with natural pyroxenes having low contents of Al and other minor components. Samples having higher contents of 'other' components require special projection onto the Ca-Mg-Fe pyroxene quadrilateral; Wo, En, and Fs as normally calculated will not yield correct temperatures. The special projection is required to approximate the activities of those components in natural pyroxenes. Whereas the effects of pressure are nonnegligible, they can be corrected for. It is pointed out that use of the thermometer for slowly cooled rocks may pose special problems if the pyroxenes have undergone granule exsolution (coalescence of exsolved material to form separate grains).

Lindsley, D. H.↗
NASA NTRS1983

Characterization of geometric isomers of Norbornene end-capped imides

Three geometric isomers from the thermal isomerization of methylene-4,4' bis(endo-N-phenylbicyclo/2.2.1/hept-2-ene-5,6-di carboximide) (I) were chromatographically separated and isolated in order to investigate the thermal cure of norbornene end-capped imide oligomers, which display considerable promise for use in various aerospace adhesive and composite applications. Endo-endo (I), endo-exo (II), and exo-exo (III) configurations were assigned to each compound based on the results of NMR spectroscopy. Several chromatographic, spectroscopic, and thermal techniques were then used to characterize these three isomers which serve as model compounds for norbornene end-capped polyimides. It was found that each compound thermally isomerized to an equilibrium mixture of all three compounds prior to cure. It is proposed that these compounds react by different mechanisms in air and nitrogen.

Young, P. R.↗
NASA NTRS1983

The use of hydroxyacids as geochemical indicators

The distributions of hydroxyacids in a variety of recent and ancient sediments have been determined by gas chromatography-mass spectrometry. A lacustrine sediment (Rostherne Mere, U.K.) and two marine situations (Cariaco Trench, Black Sea) were analyzed as examples of recent depositional environments. Beta-hydroxyacids occurred in all of the recent sediments, consistent with their presumed microbial origin, whereas di- and trihydroxyacids were present in the sediments with a significant higher plant input (Black Sea and Rostherne Mere sediments). The two ancient (Eocene) sediments examined, viz, the Greene River (U.S.) and Messel (Germany) oil shales, contained only trace amounts of hydroxyacids. These results provide evidence that hydroxyacids are in general not well preserved over geological time.

Cardoso, J. N.↗
NASA NTRS1984

Advances in solid state switchgear technology for large space power systems

High voltage solid state remote power controllers (RPC's) and the required semiconductor power switches to provide baseline technology for large, high power distribution systems in the space station, all electric airplane and other advanced aerospace applications were developed. The RPC's were developed for dc voltages from 28 to 1200 V and ac voltages of 115, 230, and 440 V at frequencies of 400 Hz to 20 kHz. The benefits and operation of solid state RPC's and highlights of several developments to bring the RPC to technology readiness for future aerospace needs are examined. The 28 V dc Space Shuttle units, three RPC types at 120 V dc, two at 270/300 V dc, two at 230 V ac and several high power RPC models at voltages up to 1200 V dc with current ratings up to 100 A are reviewed. New technology programs to develop a new family of (DI)2 semiconductor switches and 20 kHz, 440 V ac RPC's are described.

Sundberg, G. R.↗
NASA NTRS1984

The chemical durability of tektites - A laboratory study and correlation with long-term corrosion behavior

Leach tests carried out on tektite specimens (indochinites and australites) under high-dilution conditions show a common behavior characterized by low leach rates (0.00018 g/sq m per d, or 7.2 x 10 to the -12th m/d at 23 C) and an activation energy of (79,600 + or - 700 J/mol). The extent of selective leaching is very small, of the order of 10 to the -8th m. Extrapolation of test results over the lifetime of the tektites gives an excellent agreement with field observations on the extent of corrosion, and this is an important step in establishing the validity of laboratory tests as a basis for the development of models and predictions concerning long-term durabilities at least in the limiting case of high dilution or rapid flow. The results are also shown to be in agreement with various previous observations on the corrosion resistance of tektites. The chemical durability of tektites is observed to be consistent with their composition, highlighting requirements of high corrosion resistance in glasses; these requirements include a silica content in excess of 67 mol percent, an extremely low water content, and an alkali content which is low both absolutely and relative to the di- and poly-valent metal oxide levels. It is shown that artificial glasses which fulfil these criteria are no less corrosion-resistant than the corresponding natural glasses. These conclusions have bearing on the development, as well as on the evaluation, of glasses intended for very long service, such as radioactive waste vitrification media.

Barkatt, A.↗
NASA NTRS1984

Substituent effects on the electrical conductivities of the phenazine derivatives

The and/or photoconductivities of 16 substituted phenazines having methoxy, hydroxy, chloro, nitro, amino or t-butyl group at 1-, 2-, 1, 6- or 2,7- positions of the phenazine ring measured by using the surface type cells. The energy gaps of the dark conductivities in the range 2.0 to 2.3 were independent of the kinds and the positions of the substituent groups, although the photo-absorption wavelength of the evaporated films changed with them. No correlation between photoconductivity and fluorescence was observed. The photocurrent was affected by the position of the substituents; namely, the photocurrents of the 1,6-di-substituted phenazines. When the substituent at 1,6-positions was hydroxy or amino group, however, the photocurrents decreased. The photocurrents decreased drastically in the presence of oxygen.

Sugimoto, A.↗
NASA NTRS1984

Curing of epoxy resins with 1-/di(2-chloroethoxyphosphinyl)methyl/-2,4- and -2,6-diaminobenzene

Fire resistant compositions were prepared using 1-di(2-chloroethoxy-phosphinyl)methyl-2,4- and -2,6-diaminobenzene (DCEPD) as a curing agent for typical epoxy resins such as EPON 828 (Shell), XD 7342 (Dow), and My 720 (Ciba Geigy). In addition, compositions of these three epoxy resins with common curing agents such as m-phenylenediamine (MPD) or 4,4'-diaminodiphenylsulphone (DDS) were studied to compare their reactions with those of DCEPD. The reactivity of the three curing agents toward the epoxy resins, measured by differential calorimetry (DSC), was of the order MPD DCEPD DDS. The relatively lower reactivity of DCEPD toward epoxy resins was attributed to electronic effects.

Mikroyannidis, J. A.↗
NASA NTRS1984

Advanced in solid state switchgear technology for large space power systems

High voltage solid state remote power controllers (RPC's) and the required semiconductor power switches to provide baseline technology for large, high power distribution systems in the Space Station, all electric airplane and other advanced aerospace applications were developed. The RPC's were developed for dc voltages from 28 to 1200 V and ac voltages of 115, 230, and 440 V at frequencies of 400 Hz to 20 kHz. The benefits and operation of solid state RPC's and highlights of several developments to bring the RPC to technology readiness for future aerospace needs are examined. The 28 V dc Space Shuttle units, three RPC types at 120 V dc, two at 270/300 V dc, two at 230 V ac and several high power RPC models at voltages up to 1200 V dc with current ratings up to 100 A are reviewed. New technology programs to develop a new family of (DI)2 semiconductor switches and 20 kHz, 440 V ac RPC's are described.

Sundberg, G. R.↗
NASA NTRS1985

Double-injection, deep-impurity switch development

The overall objective of this program was the development of device design and process techniques for the fabrication of a double-injection, deep-impurity (DI) sup 2 silicon switch that operates in the 2-10 kV range with conduction current values of 5 A at 2 kV and 1 A at 10 kV. Other major specifications include a holding voltage of 10 V with no gate current, 10 microsec switching time, and power dissipation of 50 W at 75 C. It was decided to concentrate on the lateral circular devices in order to optimize the gold diffusion. This resulted in devices that are much better switches (approx.1 micro sec switching time), and in a gold diffusion process that is much more controllable than those previously developed. Some results with injection-gated devices were also obtained. The current conduction for V less than VT was analyzed and seen to agree, for the most part, with Lampert's theory. Various sections of this report describe the device designs, wafer-processing techniques, and various measurements which include ac and dc characteristics and four-point probe.

Whitson, D. W.↗
NASA NTRS1977

Aminophenoxycyclotriphosphazene cured epoxy resins and the composites, laminates, adhesives and structures thereof

Aminophenoxy cyclotriphosphazenes such as hexakis (4-aminophenoxy) cyclotriphosphazene and tris (4-aminophenoxy)-tris phenoxy cyclotriphosphazene are used as curing agents for epoxy resins. These 1,2-epoxy resins are selected from di- or polyepoxide containing organic moieties of the formula (CH2-CHO-CH2) m-W-R-W- (CH2CH-CH2O)m where R is diphenyl dimethylmethane, diphenylmethane; W is a nitrogen or oxygen atom; and m is 1 when W is oxygen and 2 when W is nitrogen. The resins are cured thermally in stages at between about 110 to 135 C for between about 1 and 10 min, then at between about 175 to 185 C for between 0.5 to 10 hr and post cured at between about 215 and 235 C for between 0.1 and 2 hr. These resins are useful for making fire resistant elevated temperature stable composites, laminates, molded parts, and adhesives and structures, usually for aircraft secondary structures and for spacecraft construction.

Kumar, Devendra↗
NASA NTRS1986

Kinetic study of polymerization/curing of filament-wound composite epoxy resin systems with aromatic diamines

The kinetics of polymerization/curing of a filament-wound composite epoxy resin consisting of an 80/20 DGEBA/DGEBD blend and an MDA/m-PDA blend (Tonox 60/40) was studied at various temperatures and at amine epoxy ratios between 1.1 and 4.4 by means of Fourier-transform (FT) IR and bulk viscosity measurements. The activation energy for the polymerization/curing reaction using an amine/epoxy ratio of 1.1 was 11.9 kcal/mole, in agreement with a previous value. The FT-IR conversion-time plots were fitted to a kinetic expression containing two rate constants with activation energies of 13.7 and 10.0 kcal/mole. The bulk viscosity followed the Williams et al. (1955) equation, with a Di Benedetto (1965) expression for the glass transition temperature.

Golub, M. A.↗
NASA NTRS1987

An analytically soluble problem in fully nonlinear statistical gravitational lensing

The amplification probability distribution p(I)dI for a point source behind a random star field which acts as the deflector exhibits a I exp-3 behavior for large amplification, as can be shown from the universality of the lens equation near critical lines. In this paper it is shown that the amplitude of the I exp-3 tail can be derived exactly for arbitrary mass distribution of the stars, surface mass density of stars and smoothly distributed matter, and large-scale shear. This is then compared with the corresponding linear result.

Schneider, P.↗
NASA NTRS1988

CODAC (Cockpit Oriented Display of Aircraft Configurations) version 1.4 user's guide

The Cockpit Oriented Display of Aircraft Configurations (CODAC) package is an interactive FORTRAN 77 graphics program which produces high quality publication grade hidden line images of three dimensional wireframe objects. The term, Cockpit Oriented, is used because CODAC rotates objects relative to the changing aircraft axis system (rather than about a fixed global axis system) and uses the more familiar directions of yaw, roll, and pitch. In addition, CODAC accepts geometry data in a variety of formats (LaWGS, Craidon, Hess, and FVS data check), and automatically selects the appropriate panel driver. Finally, CODAC makes full use of the Precision Visuals' DI-3000 metafile option, allowing users to save, edit, and print images for group presentations or research publications.

Bingel, Bradford D.↗
NASA NTRS1987

Blue compact dwarfs - Extreme dwarf irregular galaxies

Observational data on the most extreme members of the irregular dwarf (dI) galaxy class, the blue compact dwarfs (BCDs), are characterized, reviewing the results of recent investigations. The properties of the young stellar population, the ionized gas, the older star population, and the gas and dust of BCDs are contrasted with those of other dIs; BCD morphology is illustrated with sample images; and the value of BCDs (as nearby 'young' chemically unevolved galaxies) for studies of galaxy formation, galactic evolution, and starburst triggering mechanisms is indicated.

Thuan, Trinh X.↗
NASA NTRS1988

User's manual for EZPLOT version 5.5: A FORTRAN program for 2-dimensional graphic display of data

EZPLOT is a computer applications program that converts data resident on a file into a plot displayed on the screen of a graphics terminal. This program generates either time history or x-y plots in response to commands entered interactively from a terminal keyboard. Plot parameters consist of a single independent parameter and from one to eight dependent parameters. Various line patterns, symbol shapes, axis scales, text labels, and data modification techniques are available. This user's manual describes EZPLOT as it is implemented on the Ames Research Center, Dryden Research Facility ELXSI computer using DI-3000 graphics software tools.

Garbinski, Charles↗
NASA NTRS1989

Effects of the contamination environment on surfaces and materials

In addition to the issues that have always existed, demands are being placed on space systems for increased contamination prevention/control. Optical surveillance sensors are required to detect low radiance targets. This increases the need for very low scatter surfaces in the optical system. Particulate contamination levels typically experienced in today's working environments/habits will most likely compromise these sensors. Contamination (molecular and particulate) can also affect the survivability of space sensors in both the natural and hostile space environments. The effects of di-octyl phthalate (DOP) on sensors are discussed.

Maag, Carl R.↗
NASA NTRS1988

The design of radiation-hardened ICs for space - A compendium of approaches

Several technologies, including bulk and epi CMOS, CMOS/SOI-SOS (silicon-on-insulator-silicon-on-sapphire), CML (current-mode logic), ECL (emitter-coupled logic), analog bipolar (JI, single-poly DI, and SOI) and GaAs E/D (enhancement/depletion) heterojunction MESFET, are discussed. The discussion includes the direct effects of space radiation on microelectronic materials and devices, how these effects are evidenced in circuit and device design parameter variations, the particular effects of most significance to each functional class of circuit, specific techniques for hardening high-speed circuits, design examples for integrated systems, including operational amplifiers and A/D (analog/digital) converters, and the computer simulation of radiation effects on microelectronic ISs.

Kerns, Sherra E.↗