Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIPOLE ANTENNA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

BOLAS: A Canadian-US Ionospheric Tether Mission

Everyday, international broadcasters, ships, and aircraft use a naturally conducting atmospheric layer, the ionosphere, to reflect communications signals over the Earth's horizon. A better understanding of this layer, with its irregularities, instabilities, and dynamics, would improve communications transmission and reception. This atmospheric layer is also a lens that can distort signal transmissions from communications, navigation, and surveillance satellites. The ionosphere over Canada and other high latitude countries can carry large currents and is particularly dynamic, so that a scientific understanding of this layer is critical. The BOLAS (Bistatic Observations using Low Altitude Satellites) mission would characterize reflective and transmissive properties of the ionosphere by flying two satellites, each with identical HF receivers, dipole antennas, particle probes, and GPS receivers. The satellites would be connected by a non-conducting tether to maintain a 100 m separation, and would cartwheel in the orbit plane to spatially survey the ionosphere. The six-month mission would fly in a high inclination, 350 x 600 km orbit, and would be active during passes over the auroral region of Canada. This paper discusses the system requirements and architecture, spacecraft and operations concepts, and mission design, as well as team organization, international cooperation and the scientific and technological benefits that are expected.

Tyc, George↗
NASA NTRS1998

Radio Emissions Observed by Galileo near Io

The Galileo spacecraft observed spin modulation of radio wave emissions near Io in the frequency range from about 600 kHz to about 1.2 MHz. Assuming transverse EM radiation, we have used the modulation of the high-frequency sweep-frequency receiver signals of the electric dipole antenna over many spins to estimate the plane through the source. The emission has a range of frequencies close to the local upper hybrid frequency of the plasma near Io. We conclude that the emission may be associated with either the plasma torus or magnetic flux tubes in the wake of Io (the Alfven current system). We postulate this emission may be associated with a free-energy source such as density gradients, energetic plasma beams and/or an electron distribution with a temperature anisotropy. All of these free-energy sources are observed or expected in the torus near Io. The observations are the first in the hectometric frequency range that have a source associated with Io or in the Io torus.

Menietti, J. D.↗
NASA NTRS1998

Galileo Direction Finding of Jovian Radio Emissions

The Galileo spacecraft, in orbit about Jupiter, has observed distinct spin modulation of plasma wave emissions near the Ganymede (G1 and G2) encounters in the frequency range from about 100 kHz to approximately 6 MHz. Assuming circularly polarized, transverse electromagnetic radiation, we have used the spin modulation of the sweep-frequency receivers of the electric dipole antenna over many spins to estimate the source location in the spin plane of the spacecraft. Hectometric (HOM) and decametric (DAM) emission is observed by Galileo as a general and continuous background with frequent bursts that last tens of minutes and can be separated by minutes or hours. We have analyzed HOM and DAM emissions observed near Jupiter just after the GI and G2 encounters, including two HOM/DAM "arc" signatures observed after the G2 encounter. These latter appear to be low-frequency extensions of DAM arcs, with source regions along either the Io or the Ganymede flux tube. While the uncertainties associated with the data analysis do not allow a precise source location, the HOM/DAM emission observed near the G1 and G2 encounters is consistent with a gyroresonant source region, but it is necessary to require refraction due to the Io torus to understand the results. To explain emission from apparent source regions above a gyroresonant source region, wave refraction from asymmetries in the Io plasma torus that extend along magnetic field lines is postulated. Alternatively, if such torus density asymmetries do not exist, emission with sources above a gyroresonant source region would require another free-energy source such as energetic plasma beams in the presence of density gradients or temperature anisotropies.

Menietti, J. D.↗
NASA NTRS1999

The Plasmasphere as "Seen" by the IMAGE Mission

The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) is the first mission designed exclusively to remotely measure the magnetosphere. As such, it will reveal the ring current, plasmasphere, polar cusp, and magnetopause as whole extended, interacting systems. For the first time, our impressions of the global magnetosphere, synthesized through many years of whistler and in situ measurement, will be replaced by images. The overall morphology of each system of plasma and the correspondence of changes between them in response to the sun and solar wind will become available. The Extreme Ultraviolet Imager (EUV) and the Radio Plasma Imager (RPI) are the two IMAGE instruments which will remotely measure and image the plasmasphere. What we expect to "see" from these instruments and how it may be interpreted is the subject of this presentation. The EUV instrument includes three optical cameras, with an almost 90 degree field of view, transverse to the spin axis. EUV is designed to see He+ ions in resonantly scatter solar light at 30.4rim. The IMAGE spacecraft will spin with a period of about 2 minutes, with its spin axis parallel to the orbit normal. The IMAGE orbit will be highly inclined, with a high latitude apogee at a geocentric distance of 8RE and perigee of about 1.2RE. The normal observing integration time of 10 minutes will easily see to the outer edge of the plasmasphere. The RPI instrument makes use of three orthoganal dipole antennas: two in the spin plane with a tip-to-tip length of 500m and one along the spin axis with a length of 20 meters. Using coded pulse transmissions, the RPI instrument will broadcast from 3kHz to 3MHz. With one minute resolution, plasma densities from about 0.1 cm(exp -3) to 100,000 cm(exp -3), along with line-of-sight bulk velocities and locations, will be obtained from all returned radio wave signals. When transmitting from the high latitude magnetospheric cavity, RPI will measure density profiles for the major plasma structures in the magnetosphere, including the magnetopause, polar cusp, and plasmasphere. RPI should also see isolated density irregularities and possibly the plasma sheet. Observations The EUV instrument will return line-of-sight integrated images through the optically thin helium medium of the plasmasphere and magnetosphere. A variety of techniques have been suggested for the translation of the images into physically useful data, such as plasmapause location and three dimensional density distribution. The RPI instrument will return quantitative density values and line-of-sight velocity as a function of position along reflecting wave propagation paths. How they may be used individually and together to study plasmaspheric dynamics and global structure will be discussed. Attention will also be given to the data products and how access to IMAGE data will be provided by the IMAGE team and the NSSDC.

Gallagher, D. L.↗
NASA NTRS2001

The System and Implementation Aspects of the Mars Advanced Radar for Subsurface and Ionospheric Sounding (MARSIS)

MARSIS is a radar sounder operating in the HF frequency range to sound the surface of Mars, which will operate from the ESA Mars Express spacecraft. It is scheduled for launch from Baikonour, Russia in June 2003 and arrives in orbit around Mars in early 2004 for a two-year mission. This system is the result of an international collaboration between NASA, the Italian Space Agency (ASI), and European Space Agency (ESA). The MARSIS instrument is a 17 Kilogram total mass sounder consisting of a 40 meter tip-to-tip dipole antenna, a 7 meter long monopole antenna and the electronics module. This design of MARSIS is a tradeoff between the expected penetration into the Martian subsurface that is proportional to the wavelength of the system and the desire to operate at a short wavelength in order to minimize the effects of the ionosphere. Additional information is contained in the original extended abstract.

Jordan, R.↗
NASA NTRS2004

2.45 GHz Rectenna Designed for Wireless Sensors Operating at 500 C

High temperature wireless sensors that operate at 500 C are required for aircraft engine monitoring and performance improvement These sensors would replace currently used hard-wired sensors and lead to a substantial reduction in mass. However, even if the sensor output data is transmitted wirelessly to a receiver in the cooler part of the engine, and the associated cables are eliminated, DC power cables are still required to operate the sensors and power the wireless circuits. To solve this problem, NASA is developing a rectenna, a circuit that receives RF power and converts it to DC power. The rectenna would be integrated with the wireless sensor, and the RF transmitter that powers the rectenna would be located in the cooler part of the engine. In this way, no cables to or from the sensors are required. Rectennas haw been demonstrated at ambient room temperature, but to date, no high temperature rectennas haw been reported. In this paper, we report the first rectenna designed for 2.45 GHz operation at 500 C. The circuit consists of a microstrip dipole antenna, a stripline impedance matching circuit, and a stripline low pass filter to prevent transmission of higher harmonics created by the rectifying diode fabricated on an Alumina substrate. The rectifying diode is the gate to source junction of a 6H Sic MESFET and the capacitor and load resistor are chip elements that are each bonded to the Alumina substrate. Each element and the hybrid, rectenna circuit haw been characterized through 500 C.

Ponchak, George E.↗
NASA NTRS1993

A Prototype Quasi-Optical SIS Array Receiver

We report measurements on a prototype SIS array receiver consisting of a ten-element dipole antenna array with half square micron niobium SIS junctions.

SIS array antenna array mixer array SIS receiver w↗
NASA NTRS2007

Wireless Data-Acquisition System for Testing Rocket Engines

A prototype wireless data-acquisition system has been developed as a potential replacement for a wired data-acquisition system heretofore used in testing rocket engines. The traditional use of wires to connect sensors, signal-conditioning circuits, and data acquisition circuitry is time-consuming and prone to error, especially when, as is often the case, many sensors are used in a test. The system includes one master and multiple slave nodes. The master node communicates with a computer via an Ethernet connection. The slave nodes are powered by rechargeable batteries and are packaged in weatherproof enclosures. The master unit and each of the slave units are equipped with a time-modulated ultra-wide-band (TMUWB) radio transceiver, which spreads its RF energy over several gigahertz by transmitting extremely low-power and super-narrow pulses. In this prototype system, each slave node can be connected to as many as six sensors: two sensors can be connected directly to analog-to-digital converters (ADCs) in the slave node and four sensors can be connected indirectly to the ADCs via signal conditioners. The maximum sampling rate for streaming data from any given sensor is about 5 kHz. The bandwidth of one channel of the TM-UWB radio communication system is sufficient to accommodate streaming of data from five slave nodes when they are fully loaded with data collected through all possible sensor connections. TM-UWB radios have a much higher spatial capacity than traditional sinusoidal wave-based radios. Hence, this TM-UWB wireless data-acquisition can be scaled to cover denser sensor setups for rocket engine test stands. Another advantage of TM-UWB radios is that it will not interfere with existing wireless transmission. The maximum radio-communication range between the master node and a slave node for this prototype system is about 50 ft (15 m) when the master and slave transceivers are equipped with small dipole antennas. The range can be increased by changing to larger antennas and/or greater transmission power. The battery life of a slave node ranges from about six hours during operation at full capacity to as long as three days when the system is in a "sleep" mode used to conserve battery charge during times between setup and rocket-engine testing. Batteries can be added to prolong operational lifetimes. The radio transceiver dominates the power consumption.

Lin, Chujen↗
NASA NTRS2006

Arrays of Nano Tunnel Junctions as Infrared Image Sensors

Infrared image sensors based on high density rectangular planar arrays of nano tunnel junctions have been proposed. These sensors would differ fundamentally from prior infrared sensors based, variously, on bolometry or conventional semiconductor photodetection. Infrared image sensors based on conventional semiconductor photodetection must typically be cooled to cryogenic temperatures to reduce noise to acceptably low levels. Some bolometer-type infrared sensors can be operated at room temperature, but they exhibit low detectivities and long response times, which limit their utility. The proposed infrared image sensors could be operated at room temperature without incurring excessive noise, and would exhibit high detectivities and short response times. Other advantages would include low power demand, high resolution, and tailorability of spectral response. Neither bolometers nor conventional semiconductor photodetectors, the basic detector units as proposed would partly resemble rectennas. Nanometer-scale tunnel junctions would be created by crossing of nanowires with quantum-mechanical-barrier layers in the form of thin layers of electrically insulating material between them (see figure). A microscopic dipole antenna sized and shaped to respond maximally in the infrared wavelength range that one seeks to detect would be formed integrally with the nanowires at each junction. An incident signal in that wavelength range would become coupled into the antenna and, through the antenna, to the junction. At the junction, the flow of electrons between the crossing wires would be dominated by quantum-mechanical tunneling rather than thermionic emission. Relative to thermionic emission, quantum mechanical tunneling is a fast process.

Son, Kyung-Ah↗
NASA NTRS2014

Technologies for Low Frequency Radio Observations of the Cosmic Dawn

The Jet Propulsion Laboratory (JPL) is developing concepts and technologies for low frequency radio astronomy space missions aimed at observing highly redshifted neutral Hydrogen from the Dark Ages. This is the period of cosmic history between the recombination epoch when the microwave background radiation was produced and the re-ionization of the intergalactic medium by the first generation of stars (Cosmic Dawn). This period, at redshifts greater than about 20, is a critical epoch for the formation and evolution of large-scale structure in the universe. The 21-cm spectral line of Hydrogen provides the most promising method for directly studying the Dark Ages, but the corresponding frequencies at such large redshifts are only tens of MHz and thus require space-based observations to avoid terrestrial RFI and ionospheric absorption and refraction. This paper reports on the status of several low frequency technology development activities at JPL, including deployable bi-conical dipoles for a planned lunar-orbiting mission, and both rover-deployed and inflation-deployed long dipole antennas for use on the lunar surface.

Cosmic Dark Ages↗
NASA NTRS2013

A 294 GHz 0.47m W Caterpillar amplifier based transmitter in 65 nm CMOS for THz data-links

A fully integrated CMOS THz transmitter for short range data-links is presented which provides 0.47 mW of output power to 294 GHz. The output frequency is derived from a 147 GHz on-chip LO and fully differential caterpillar power amplifier combined with a transformer coupled frequency doubler. The transmitter is integrated with an on-chip dipole antenna for use in THz communication systems and consumes a total of 258 mW.

Chang, Mau-Chung Frank↗
NASA NTRS2023

A Spaceborne Demonstration of P-Band Signals-of-Opportunity (SoOp) Reflectometry

Land-reflected signals from a geosynchronous communication satellite broadcasting in P-band (367.5 MHz) were captured in low Earth orbit (LEO) using a simple dipole antenna. A delay-Doppler map (DDM) was generated through autocorrelation. Estimates of the specular point delay were obtained from the lag of the second peak in the DDM with a bias of 239.4 m and a standard deviation of 44 m (12 m over a frozen lake) with respect to a predicted orbit model. Relative magnitudes of the first and second DDM peaks fell within the range of values predicted using dielectric models for the frozen ground and lake. Finally, retrievals of surface reflection coefficient were generated using a range of realistic values for the transmitter link budget G/T , and these also fell within the range of possible values for the antenna gain pattern. Given the lack of calibration and the large uncertainties in the receiver orbit and attitude, this agreement is sufficient to conclude a successful demonstration of the fundamental principle of single-antenna reflectometry in P-band. P-band reflectometry may offer a new approach to remote sensing of sub-canopy and root-zone soil moisture.

Delays↗
NASA NTRS1970

Improved modified turnstile antenna

Improved antenna design embodies the principles of turnstiling, broadbanding, and delta dipole matching. Antenna is useful in commercial broadcast applications.

Lemson, P. H.↗
NASA NTRS2011

A Comparison Between Jerusalem Cross and Square Patch Frequency Selective Surfaces for Low Profile Antenna Applications

In this paper, a comparison between Jerusalem Cross (JC) and Square Patch (SP) based Frequency Selected Surfaces (FSS) for low profile antenna applications is presented. The comparison is aimed at understanding the performance of low profile antennas backed by high impedance surfaces. In particular, an end loaded planar open sleeve dipole (ELPOSD) antenna is examined due to the various parameters within its configuration, offering significant design flexibility and a wide operating bandwidth. Measured data of the antennas demonstrate that increasing the number of unit cells improves the fractional bandwidth. The antenna bandwidth increased from 0.8% to 1.8% and from 0.8% to 2.7% for the JC and SP structures, respectively. The number of unit cells was increased from 48 to 80 for the JC-FSS and from 24 to 48 for the SP-FSS.

Cure, David↗