Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIVING - PULL-OUTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Mineralogical studies of sulfide samples and volatile concentrations of basalt glasses from the southern Juan de Fuca Ridge

Sulfide samples obtained from Alvin dives on the southern Juan de Fuca Ridge were examined, showing the presence of two previously undiscovered minerals, both formed at low temperatures. The first detection of lizardite, starkeyite, and anatase in such an environment is also reported. Sulfide geothermometry involving the Cu-Fe-S system shows a vent temperature of less than 328 C for one sample. Ice-melting temperatures on inclusions from this sample are about -2.8 C, and fluid inclusion studies on crystals near this sample show pressure-corrected homogenization temperatures of 268 and 285 C. Volatile concentrations from vesicle-free basalt glass from the vent field are found to be about 0.0013 wt pct CO2 and 0.16 wt pct H2O.

Brett, Robin↗
NASA NTRS1988

The evolution of AAOE observed constituents with the polar vortex

One of the difficulties in determining constituent trends from the ER-2 flight data is the large amount of day to day variability generated by the motion of the polar vortex. To reduce this variability, the observations have been transformed into the conservative (Lagrangian) reference frames consisting of the coordinate pairs, potential temperature (PT) and potential vorticity (PV), or PT and N2O. The requirement of only two independent coordinates rests on the assumption that constituent distributions and their chemical processes are nearly zonal in that coordinate system. Flight data is used everywhere for these transformation except for potential vorticity. Potential vorticity is determined from level flight segments, and NMC PV values during flight dives and takeoffs are combined with flight data in a smooth fashion.

Schoeberl, Mark R.↗
NASA NTRS1988

In situ observations of BrO over Antarctica: ER-2 aircraft results from 54 S to 72 S latitude

Bromine monoxide was observed in situ at approximately 18 km altitude during nine flights of the NASA ER-2 aircraft from Punta Arenas, Chile (54 altitude) to 72 S latitude over the Palmer Peninsula, Antarctica. The first flight for the BrO detection system was on 28 August. Here, the results from the flights over Antarctica and from the ferry flights from Punta Arenas to Moffett Field, CA (37 N latitude are reported. A key question concerning BrO, then, is how it is distributed with respect to the chemical containment vessel defined by elevated ClO mixing ratios. This question is answered with greatest statistical significance if the data are averaged into five regions: outside the vessel, aircraft heading south; inside the vessel on the same potential temperature surface; in the dive region; inside the vessel on a given potential temperature surface, aircraft heading north; and outside the vessel on the same surface. The result is that the BrO distribution inside the chemical containment vessel was different from that found outside. Inside, the BrO mixing ratio was (5.0 plus or minus 1.1) pptv between the 400 K and 460 K potential temperature surfaces, decreasing only slightly with potential temperature, and was less than 3.6 pptv below the 4 00 K surface. The abundance of BrO inside the chemical containment vessel showed no discernible temporal trend during the course of the nine flights. Outside the vessel, the BrO mixing ratio was (4.7 plus or minus 1.3) pptv near the 450 K surface, but decreased to (2.8 plus or minus 1.0) pptv near the 420 K surface.

Brune, W. H.↗
NASA NTRS1987

Definition of tolerance to continuous hyperoxia in man - An abstract report of Predictive Studies V

The overall goals, design, and procedures of Predictive Studies V are discussed as well as the specific elements of neural effects produced by prolonged hyperoxia. It is noted that Predictive Studies V study of oxygen poisoning in normal men during uninterrupted exposures to oxygen over the range of hyperbaric oxygen exposure most useful in diving, the treatment of gas lesion diseases, and general hyperbaric medicine. It is found that, throughout the study, the most striking observations were related to effects on visual function, on the lung, and the probable interactions of preconvulsive neural activity with effects on cardiovascular and respiratory-pulmonary functions.

Lambertsen, C. J.↗
NASA NTRS1990

Control of submersible vortex flows

Vortex flows produced by submersibles typically unfavorably influence key figures of merit such as acoustic and nonacoustic stealth, control effectiveness/maneuverability, and propulsor efficiency/body drag. Sources of such organized, primarily longitudinal, vorticity include the basic body (nose and sides) and appendages (both base/intersection and tip regions) such as the fairwater, dive planes, rear control surfaces, and propulsor stators/tips. Two fundamentally different vortex control approaches are available: (1) deintensification of the amplitude and/or organization of the vortex during its initiation process; and (2) downstream vortex disablement. Vortex control techniques applicable to the initiation region (deintensification approach) include transverse pressure gradient minimization via altered body cross section, appendage dillets, fillets, and sweep, and various appendage tip and spanload treatment along with the use of active controls to minimize control surface size and motions. Vortex disablement can be accomplished either via use of control vortices (which can also be used to steer the vortices off-board), direct unwinding, inducement of vortex bursting, or segmentation/tailoring for enhanced dissipation. Submersible-applicable vortex control technology is also included derived from various aeronautical applications such as mitigation of the wing wake vortex hazard and flight aircraft maneuverability at high angle of attack as well as the status of vortex effects upon, and mitigation of, nonlinear control forces on submersibles. Specific suggestions for submersible-applicable vortex control techniques are presented.

Bushnell, D. M.↗
NASA NTRS1991

Superfiber For Strong, Light Fabrics

New ultrahigh-molecular-weight fiber offers major advantages as fabric for space suits, diving suits, sporting goods, sails, and ultralight aircraft. Polyolefin fiber has extremely high modulus of elasticity, low elongation, high specific strength, low specific gravity, resistance to chemicals, low moisture absorption, and high resistance to damage by flexure and abrasion. Consists of elongated, highly aligned, highly crystalline polyethylene molecules. Structure not only results in high strength-to-weight ratio but also gives high resistance to tearing and ripping. Fibers woven in many patterns. Offers combination of desirable properties not found in nylon, polyester, or aramid fabrics.

Dawn, Frederic S.↗
NASA NTRS1990

Analysis of pressure-broadened ozone spectra in the 3 micron region

The Molecular Spectroscopy Lab at NASA-Langley has been involved in a long term effort to carefully characterize the infrared spectra of small molecules of atmospheric interest, including methane, water vapor, ozone, and their isotopic counterparts. High resolution gas phase infrared spectra are obtained using both a tunable diode laser system, and the McMath Fourier transform spectrometer at the Kitt Peak Solar Observatory. Spectra are obtained at various pressures and temperatures for pure gas samples, and for samples containing mixtures of the species of interest in nitrogen, oxygen, or air. From these spectra, using a nonlinear least squares fitting technique, spectral parameters of position, intensity, and half-width were determined for varying laboratory conditions that approximate atmospheric conditions experienced in remote sensing situations. These parameters are of interest in theoretical studies of these species, as well as in allowing more accurate interpretation of remote sensing data. The current work involves the analysis of a series of McMath FTIR spectra of ozone broadened by mixing with air, nitrogen, or oxygen. Each spectrum covers the region from 2396 to 4057/cm. Each vibrational band is analyzed by first diving its region into small intervals containing a few well isolated absorption lines of reasonable intensity. Each of these small intervals is fit by multiple iterations of the nonlinear least square program until residuals are minimized to a reasonable value which corresponds to the noise level of the measured spectrum. Intervals for the 3 nu(sub 3) ozone band in the region from 3000 to 3060 wavenumbers are being examined.

Prochaska, Eleanor S.↗
NASA NTRS1992

Team dynamics in isolated, confined environments - Saturation divers and high altitude climbers

The effects of leadership dynamics and social organization factors on team performance under conditions of high altitude climbing and deep sea diving are studied. Teams of two to four members that know each other well and have a relaxed informal team structure with much sharing of responsibilities are found to do better than military teams with more than four members who do not know each other well and have a formal team structure with highly specialized rules. Professionally guided teams with more than four members, a formally defined team structure, and clearly designated role assignments did better than 'club' teams of more than four members with a fairly informal team structure and little role specialization.

Kanki, Barbara G.↗
NASA NTRS1992

Helmet mounted display flight symbology research

Screen/head stabilized MIL-STD 1295 helmet mounted display (HMD) flight symbology as integrated on the Apache helicopter was compared to world referenced/stabilized flight symbology. Simulation test results indicate that pilots perform significantly better using world-stabilized conformal attitude symbology. They were accurate to an average of 1/2 degree at estimating terrain relief and aerial target locations. World stabilized conformal symbology was preferred while performing contour flight tasks. They reported that the use of climb-dive-marker during contour flight greatly reduced pilot work load under conditions tested. Cyclic input errors occurred when using both 1295 hover symbology and test symbology indicating that a better approach for depicting hover symbology is warranted. The magnitude of cyclic input and spatial estimation errors increased as the off-axis viewing angle became larger.

Haworth, Loran A.↗
NASA NTRS1992

Helmet Mounted Display symbology integration research

A five-week flight simulation investigation comparing screen/head stabilized Apache Helmet Mounted Display (HMD) flight symbology to world stabilized flight symbology is presented in this paper. Simulation test results indicate that pilots perform significantly (P is less than .05) better using world stabilized attitude symbology. They were accurate to an average of 1/2 deg at estimating terrain relief and aerial target locations. Pilots were able to take advantage of world referenced symbology due to the unique features of HMD that allow the pilot to visually use the symbology at extreme azimuth and elevation off-axis angles. Pilots preferred world stabilized symbology while performing contour flight tasks. They reported that the use of climb-dive-marker during contour flight greatly reduced pilot work load under conditions tested. A surprising number of cyclic input errors occurred when using both MIL-STD-1295 hover symbology and test symbology, indicating that a better approach for depicting hover symbology is probably warranted. The magnitude of cyclic input and spatial estimation errors increased as the off-axis viewing angle became larger.

Haworth, Loran A.↗
NASA NTRS1928

The reaction on a float bottom when making contact with water at high speeds

Tests were conducted to investigate the possibility of a serious accident arising from unintentional contact with the water in substantially horizontal flight at high speed. Referring to vector diagrams on Figure 2, it will be seen that a very dangerous condition may arise if the float be allowed to come in contact with the water at high speeds as, for example, when flying at high speed just above the water. The initial diving moment due to suction and drag combined may be great enough to cause the seaplane to nose under before the pilot is able to control the motion. The same test data indicate clearly the existence of forces and moments tending to produce the phenomenon observed by Mr. Carroll (Technical Note No. 287) when the maneuver is carried out at lower speeds, as in a landing.

Richardson, H C↗
NASA NTRS1939

Wind-tunnel Investigation of Ground Effect on Wings with Flaps

An investigation was conducted in the N.A.C.A. 7- by 10-foot wind tunnel to determine the effect of ground proximity on the aerodynamic characteristics of wings equipped with high-lift devices. A rectangular and a tapered wing were tested without flaps, with a split flap, and with a slotted flap. The ground was represented by a flat plate, completely spanning the tunnel and extending a considerable distance ahead and back of the model. The position of the plate was varied from one-half to three chord lengths below the wing. The results are presented in the form of curves of absolute coefficients, showing the effect of the ground on each wing arrangement. The effect of the ground on lift, drag, and pitching moment is discussed. An appendix gives equations for calculating tunnel-wall corrections to be applied to ground-effect tests conducted in rectangular tunnels when a plate is used to represent the ground. The tests indicated that the ground effect on wings with flaps is a marked decrease in drag, a decrease in diving moment, and a substantial reduction in maximum lift.

Recant, Isidore G↗
NASA NTRS1958

Exploratory Wind-Tunnel Investigation to Determine the Lift Effects of Blowing over Flaps from Nacelles Mounted Above the Wing

An exploratory wind-tunnel investigation has been made to determine the lift effects of blowing from nacelles over the upper surface of flaps on a model having a delta wing of aspect ratio 3. Several flap conditions were examined. High-pressure air was blown from an external-pipe arrangement supported above the wing to simulate jet-engine exhaust. The jet momentum- coefficient range was from 0 to 3.0 and the model angle of attack was 0 deg. The results of this limited investigation show that values of jet circulation lift coefficient larger than the Jet reaction were produced with blowing over flaps from nacelles mounted above the wing. 'I!heuse of double slotted flaps with the gap unsealed between the flaps and wing had a large detrimental effect on the lift capabilities. With these gaps sealed, larger lift coefficients were obtained when fantails were added to the nacelles. The longitudinal trim problems created by large diving moments were similar to those encountered with other jet-augmented-flap systems

Riebe, John M↗
NASA NTRS1929

Calculation of the pressures on aircraft engine bearings

For aircraft engines the three principal operating conditions are idling speed, cruising speed, and diving with the engine stopped. In what follows, we will discuss a method which affords a good idea of the course of pressure for the above mentioned operating conditions. The pressures produced in the driving gear are of three kinds; namely, the pressure due to gases, the pressure due to the inertia of the rotating masses, and the pressure due to the inertia of the reciprocating masses.

BEARINGS - PRESSURES - CALCULATION↗
NASA NTRS1921

Analysis of wing truss stresses including the effect of redundancies

Airplane wing trusses are generally designed to contain redundant members (stagger wires and external drag wires) which, according to common practice, are not taken into account in calculations, so as to simplify the stress analysis by rendering the structure statically determinate. A more accurate method, in which the redundancies are included, involves a solution by means of Castigliano's method of least work. For the purpose of demonstrating the practical application of the method of least work this report presents examples for stresses of several cases of loading worked out for a structure similar to that of the Curtiss JN-4h. Case 1 was taken as the condition of velocity of 100 miles per hour combined with the angle of attack of maximum lift. Case 1a assumed the same loading but neglected the distortion of wooden members in the least-work analysis. So little error was involved in case 1a that this simplified method was employed for each succeeding case. Case 2 assumed a diving speed of 120 miles per hour and an angle of attack of no lift. Case 3 was worked out for the conditions imposed by the sand load recommended in NACA technical note no. 6.

Warner, E P↗
NASA NTRS1923

The Pressure Distribution over the Horizontal Tail Surfaces of an Airplane III

This report contains the results of an investigation of the distribution of pressure over the tail surfaces of a full-sized airplane during accelerated flight for the purpose of determining the magnitude of the tail and fuselage stresses in maneuvering. As the pressures in accelerated flight change in value with great rapidity, it was found that the liquid manometer used in the first part of this investigation would not be at all suitable under these conditions; so it was necessary to design and construct a new manometer containing a large number of recording diaphragm gauges for these measurements. Sixty openings on the tail surfaces were connected to this manometer and continuous records of pressures for each pair of holes were taken during various maneuvers. There were also recorded, simultaneously with the pressures, the normal acceleration at the center of gravity and the angular position of all the controls. The present investigation consisted in measuring on a standard rigged JN4H airplane the distribution of pressure over the whole of the horizontal tail surfaces while the airplane was being put through maneuvers as violently as it was thought safe, including spinning and pulling out of dives.

Norton, F H↗
NASA NTRS1923

A Study of Airplane Maneuvers with Special Reference to Angular Velocities

This investigation was undertaken by the National Advisory Committee for Aeronautics for the purpose of increasing our knowledge on the behavior of the airplane during various maneuvers and to obtain values of the maximum angular velocities and accelerations in flight. The method consisted in flying a JN4H airplane through various maneuvers while records were being taken of the control position, the air speed, the angular velocity and the acceleration along the Z axis. The results showed that the maximum angular velocity about the X axis of radians per second in a barrel roll. The maximum angular acceleration about the X axis of -2.10 radians per (second) to the 2nd power occurred in a spin, while the maximum about the Y axis was 1.40 radians per (second) to the 2nd power when pulling suddenly out of a dive. These results have direct application to the design of airplane parts, such as propeller shaft and instruments.

Reid, J E↗
NASA NTRS1925

Accelerations in Flight

This work on accelerometry was done at McCook Field for the purpose of continuing the work done by other investigators and obtaining the accelerations which occur when a high-speed pursuit airplane is subjected to the more common maneuvers. The accelerations obtained in suddenly pulling out of a dive with well-balanced elevators are shown to be within 3 or 4 per cent of the theoretically possible accelerations. The maximum acceleration which a pilot can withstand depends upon the length of time the acceleration is continued. It is shown that he experiences no difficulty under the instantaneous accelerations as high as 7.8 G., but when under accelerations in excess of 4.5 G., continued for several seconds, he quickly loses his faculties.

Doolittle, J H↗