Search NASA⌕ Search

SEARCH · Search NASA

Results for “DOWNSTREAM FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Structure of the November 12, 1978, quasi-parallel interplanetary shock

The jump in plasma parameters exhibited by the intense interplanetary shock event of Nov. 12, 1978 is analyzed using ISEE 1, 2 and 3 data. Magnetic and electric field measurements indicated that the shock magnetic field profile was similar to the earth bow shock profile. Data on the electron and proton densities, temperatures, bulk velocities and alpha particles showed a steady electron temperature increase across the shock on a 12 earth radii scale. The upstream and downstream flow parameters are found to be within 10 percent of Rankin-Hugoniot jump conditions. The shock moved at 614 km/sec and had three dissipative scales, one a few Larmor radii determined by the magnetic field jump, a second 10 earth radii correlated with the electron equilibrium and the other 30 earth radii connected to the energetic proton foreshock.

Kennel, C. F.↗
NASA NTRS1985

Two dimensional, transient catalytic combustion of CO-air on platinum

The light off transient of catalytic combustion of lean CO-air mixtures in a platinum coated channel of a honeycomb monolith is studied with a model that resolves transient radial and axial gradients in both the gas and the solid. For the conditions studied it is concluded that: the initial heat release occurs near the entrance at the gas-solid interface and is controlled by heterogeneous reactions; large spatial and temporal temperature gradients occur in the solid near the entrance controlled mostly by the availability of fuel; the temperature of the solid near the entrance achieves almost its steady state value before significant heating of the back; heterogeneous reactions and the gas heated up front and flowing downstream heat the back of the solid; the overall transient time is controlled by the thermal inertia of the solid and by forced convection; radiation significantly influences both transient and steady state particularly near the entrance; the oxidation of CO occurs mostly on the catalyst and becomes diffusion controlled soon into the transient.

Sinha, N.↗
NASA NTRS1986

Time-dependent coronal shock acceleration of energetic solar flare particles

A global time-dependent model is presented for the coronal and interplanetary shock acceleration and propagation of energetic solar flare particles. The calculations are carried out to help prove that coronal shock acceleration of solar flare particles is responsible for energetic solar flare event data gathered in interplanetary space. The model is based on the theory of diffusive shock acceleration, and requires particle speeds to be much greater than bulk velocities. Also, sufficient scattering must occur upstream and downstream of the shock for the particle scattering mean free path to be smaller than the characteristic scale lengths, which causes the same particles to encounter the shock repeatedly. A spherically symmetric shock wave is assumed, which leads to the same emission configuration for impulsively and monoenergetically emitted particles. Consideration is given to acceleration by compression at the shock front, adiabatic deceleration in the divergent downstream flow, the temporal evolution of the shock and the three-dimensional geometry of the corona. The model is used to generate normalized proton omnidirectional distributions at 1 AU and at the shock front. The spectral exhibit trends similar to those in observational data, especially proton acceleration times and the proton distribution profiles at 1 AU.

Lee, M. A.↗
NASA NTRS1987

Numerical simulations of trailing vortex bursting

Solutions of the steady-state Navier-Stokes equations for the axisymmetric bursting of a laminar trailing vortex are computed with Newton's method and the pseudo-arc length continuation method for wide ranges of vortex strength and Reynolds number. The results indicate that a trailing vortex can undergo a transition from a state in which the core slowly diffuses to a state marked by large amplitude, spatial oscillations of core radius and core axial velocity. At the transition point the core grows rapidly in size. This event is interpreted as vortex bursting. The results also suggest that when the maximum core swirl velocity is sufficiently large the centerline axial flow downstream of transition will be reversed.

Beran, Philip S.↗
NASA NTRS1987

Critical Mach numbers in classical magnetohydrodynamics

Stationary point analysis is used to compute generalized critical Mach numbers for finite-amplitude fast and slow shocks in classical MHD fluids. Particular attention is paid to the case where the resistive and thermal conduction dissipation scale lengths are comparable and much larger than the viscous scale lengths. With both resistivity and thermal conduction, the critical Mach number at which viscosity must be invoked is determined by the condition that the downstream flow speed equals the isothermal sound speed. It is also shown that resistivity and thermal conduction can provide convergent stationary point solutions for nearly all slow shocks, except perhaps switch-off-shocks.

Kennel, Charles F.↗
NASA NTRS1988

Development of three-dimensional code for the analysis of jet mixing problem. Part 1: Laminar solution

Future aircraft will eventually feature nonaxisymmetric or rectangular nozzles. Developing a three-dimensional code to stimulate the characteristics of the jet exhaust plume, issuing from nonaxisymmetric nozzles, in general, at different flight conditions, is very important. Two three-dimensional codes were developed to simulate the shock-cell structure of circular nozzles. These codes were developed to solve the parabolized and simplified Navier-Stokes equations respectively. Both codes are based on a method previously developed by Newsome et al. These codes are fully vectorized on the VPS 32 at NASA Langley Research Center. The axisymmetric underexpanded supersonic jet flow problem, exhausting into still air, was used as a test case for developing an efficient three-dimensional problems and preserving crossplane symmetry of the flow downstream of the jet exit.

Abdol-Hamid, Khaled S.↗
NASA NTRS1989

Low-speed flowfield characterization by infrared measurements of surface temperatures

An experimental program was aimed at identifying areas in low speed aerodynamic research where infrared imaging systems can make significant contributions. Implementing a new technique, a long electrically heated wire was placed across a laminar jet. By measuring the temperature distribution along the wire with the IR imaging camera, the flow behavior was identified. Furthermore, using Nusselt number correlations, the velocity distribution could be deduced. The same approach was used to survey wakes behind cylinders in a wind-tunnel. This method is suited to investigate flows with position dependent velocities, e.g., boundary layers, confined flows, jets, wakes, and shear layers. It was found that the IR imaging camera cannot accurately track high gradient temperature fields. A correlation procedure was devised to account for this limitation. Other wind-tunnel experiments included tracking the development of the laminar boundary layer over a warmed flat plate by measuring the chordwise temperature distribution. This technique was applied also to the flow downstream from a rearward facing step. Finally, the IR imaging system was used to study boundary layer behavior over an airfoil at angles of attack from zero up to separation. The results were confirmed with tufts observable both visually and with the IR imaging camera.

Gartenberg, E.↗
NASA NTRS1989

Preliminary study of the interactions caused by crossing shock waves and a turbulent boundary layer

The subject research, the first phase of an extended study of the interaction of crossing shock waves with a turbulent boundary layer, has revealed the complexity of the resulting flow. Detailed surface visualization and mean wall static pressure distributions show little resemblance to the inviscid flow approximation, and the exploratory high frequency measurements show that the flow downstream of the theoretical inviscid shock crossing position has a significant unsteady characteristic. Further developments of the (unsteady) high frequency measurements are required to fully characterize the unsteadiness and the requirements to include this component in flowfield modeling.

Ketchum, A. C.↗
NASA NTRS1990

A study of the unsteadiness of crossing shock wave turbulent boundary layer interactions

The unsteadiness of crossing shock wave turbulent boundary layer interactions at a nominal Mach number of 3 was examined by measuring wall pressure fluctuations using multiple, high frequency response, pressure transducers. The unsteadiness in the initial part of the interaction for all the interactions is similar to that of single fin interaction as studied by Tran and Bogdonoff (1987). However, for stronger interactions, flow downstream of the inviscid shock crossing position has a significant unsteady characteristic. In this unsteady region of the interaction, mean surface pressure rises significantly over the value obtained from the inviscid shock approximation. The energy spectrum of the fluctuating pressure signal shows a significant increase in the energy level at the higher frequencies.

Poddar, K.↗
NASA NTRS1991

The aerodynamic effect of fillet radius in a low speed compressor cascade

The aerodynamic effects of fillet size in a low speed compressor cascade were experimentally studied. Two blade profiles were used during the experiment, namely a controlled diffusion blade and a double circular arc blade. Cascades were tested with three fillet radii and two boundary layer thicknesses over a large range of incidence angles. The cascade performance was determined by extensive downstream flow measurements using a two head, 5 hole pressure probe. Results differ significantly between the two types of blades tested. As fillet radius increases secondary flows and total pressure losses were found to increase for the controlled diffusion blades; whereas, for the double circular arc blades the losses decrease, particularly at high incidence angles.

Curlett, Brian P.↗
NASA NTRS1991

Comparison of laser transit anemometry data analysis techniques

Two techniques for the extraction of two-dimensional flow information from laser transit anemometry (LTA) data sets are presented and compared via a simulation study and experimental investigation. The methods are a probability density function (PDF) estimation technique and a marginal distribution analysis technique. The simulation study builds on the results of previous work and provides a quantification of the accuracy of both techniques for various LTA data acquisition scenarios. The experimental comparison consists of using an LTA system to survey the flow downstream of a turbulence generator in a small low-speed wind tunnel. The collected data sets are analyzed and compared.

Humphreys, William M., Jr.↗
NASA NTRS1993

Turbulent flow in a channel with transverse rib heat transfer augmentation

Turbulent flow in a 2D channel with repeated rectangular rib roughness was numerically simulated using a low Reynolds number form of the k-epsilon turbulence model. Friction factors and average Stanton numbers were calculated for various pitch to rib height ratios and bulk Reynolds numbers. Comparisons with experiment were generally adequate, with the predictions of friction superior to those for heat transfer. The effect of variable properties for channel flow was investigated, and the results showed a greater effect for friction than for heat transfer. Comparison with experiment yielded no clear conclusions. The turbulence model was also validated for a related problem, that of flow downstream of an abrupt pipe expansion.

Chang, B. H.↗
NASA NTRS1995

Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor Rotor

Experimental and computational techniques are used to investigate tip clearance flows in a transonic axial compressor rotor at design and part speed conditions. Laser anemometer data acquired in the endwall region are presented for operating conditions near peak efficiency and near stall at 100% design speed and at near peak efficiency at 60% design speed. The role of the passage shock/leakage vortex interaction in generating endwall blockage is discussed. As a result of the shock/vortex interaction at design speed, the radial influence of the tip clearance flow extends to 20 times the physical tip clearance height. At part speed, in the absence of the shock, the radial extent is only 5 times the tip clearance height. Both measurements and analysis indicate that under part-speed operating conditions a second vortex, which does not originate from the tip leakage flow, forms in the endwall region within the blade passage and exits the passage near midpitch. Mixing of the leakage vortex with primary flow downstream of the rotor at both design and part speed conditions is also discussed.

Suder, Kenneth L.↗
NASA NTRS1959

Combustion of Various Highly Reactive Fuels in a 3.84- by 10-inch Mach 2 Wind Tunnel

The following fuels and fuel combinations injected from the top wall of a Mach 2 wind tunnel were successfully burned and gave associated pressure rises: aluminum borohydride, pentaborane, mixtures containing up to 41 percent JP-4 fuel in aluminum borohydride, tandem injections of aluminum borohydride, tandem injections of JP-4 fuel and aluminum borohydride, trimethyl aluminum with water injections, and diethyl aluminum hydride with water injections. The following fuels could not be ignited at the tunnel conditions (static pressure, 5.6 in. Hg; static temperature, -148 F): trimethylborane, triethylborane, propylpentaborane, ethyl- decaborane, and vinylsilane. Studies in which the heated region was probed by water injections indicated that the flow downstream of the flame front is subsonic and recirculating.

Allen, Harrison, Jr.↗
NASA NTRS2001

Supersonic Pulsed Injection

An injector has been developed to provide high-speed high-frequency (order 10 kHz) pulsed a supersonic crossflow. The injector nozzle is formed between the fixed internal surface of the nozzle and a freely rotating three- or four-sided wheel embedded within the device. Flow-induced rotation of the wheel causes the nozzle throat to open and close at a frequency proportional to the speed of sound of the injected gas. Measurements of frequency and mass flow rate as a function of supply pressure are discussed for various injector designs. Preliminary results are presented for wall-normal injection of helium into a Mach-2 ducted airflow. The data include schlieren images in the injectant plume in a plane normal to the flow, downstream of injection.

Cutler, A. D.↗
NASA NTRS2003

Very Large Eddy Simulation Technique for Noise Prediction and Control in Turbomachinery and Propulsion

The summer fellowship research project focused on further developing an advanced computational technique based on Very Large Eddy Simulation (VLES) for analysis and control of major sources of noise in turbomachinery and propulsion systems, including jet noise and fan noise. Major part of the work during the 10-week tenure dealt with implementing a low-order, implicit A-stable time-stepping scheme in the existing explicit VLES code of Dr. Ray Hixon. The preliminary plan of the work also included application of a new time marching formulation to the problem of viscous gust-airfoil interaction. Other research items selected for implementation (possibly in the future) included investigating a set of new subgrid turbulent models for the code, and code application to a number of test cases, including a supersonic jet and swirling flow downstream of a rotor stage.

Golubev, Vladimir V.↗
NASA NTRS2006

Increased Fidelity in Prediction Methods For Landing Gear Noise

An aeroacoustic prediction scheme has been developed for landing gear noise. The method is designed to handle the complex landing gear geometry of current and future aircraft. The gear is represented by a collection of subassemblies and simple components that are modeled using acoustic elements. These acoustic elements are generic, but generate noise representative of the physical components on a landing gear. The method sums the noise radiation from each component of the undercarriage in isolation accounting for interference with adjacent components through an estimate of the local upstream and downstream flows and turbulence intensities. The acoustic calculations are made in the code LGMAP, which computes the sound pressure levels at various observer locations. The method can calculate the noise from the undercarriage in isolation or installed on an aircraft for both main and nose landing gear. Comparisons with wind tunnel and flight data are used to initially calibrate the method, then it may be used to predict the noise of any landing gear. In this paper, noise predictions are compared with wind tunnel data for model landing gears of various scales and levels of fidelity, as well as with flight data on fullscale undercarriages. The present agreement between the calculations and measurements suggests the method has promise for future application in the prediction of airframe noise.

Lopes, Leonard V.↗
NASA NTRS2007

Full Life-Cycle Defect Management Assessment: Initial Inspection Data Collection Results and Research Questions for Further Study

It is often the case in software projects that when schedule and budget resources are limited, the Verification and Validation (V&V) activities suffer. Fewer V&V activities can be afforded and moreover, short-term challenges can result in V&V activities being scaled back or dropped altogether. As a result, too often the default solution is to save activities for improving software quality until too late in the life-cycle, relying on late-term code inspections followed by thorough testing activities to reduce defect counts to acceptable levels. As many project managers realize, however, this is a resource-intensive way of achieving the required quality for software. The Full Life-cycle Defect Management Assessment Initiative, funded by NASA s Office of Safety and Mission Assurance under the Software Assurance Research Program, aims to address these problems by: Improving the effectiveness of early life-cycle V&V activities to make their benefits more attractive to team leads. Specifically, we focus on software inspection, a proven method that can be applied to any software work product, long before executable code has been developed; Better communicating this effectiveness to software development teams, along with suggestions for parameters to improve in the future to increase effectiveness; Analyzing the impact of early life-cycle V&V on the effectiveness and cost required for late life-cycle V&V activities, such as testing, in order to make the tradeoffs more apparent. This white paper reports on an initial milestone in this work, the development of a preliminary model of inspection effectiveness across multiple NASA Centers. This model contributes toward reaching our project goals by: Allowing an examination of inspection parameters, across different types of projects and different work products, for an analysis of factors that impact defect detection effectiveness. Allowing a comparison of this NASA-specific model to existing recommendations in the literature regarding how to plan effective inspections. Forming a baseline model which can be extended to incorporate factors describing: the numbers and types of defects that are missed by inspections; how such defects flow downstream through software development phases; how effectively they can be caught by testing activities in the late stages of development. The model has been implemented in a prototype web-enabled decision-support tool which allows developers to enter their inspection data and receive feedback based on a comparison against the model. The tool also allows users to access reusable materials (such as checklists) from projects included in the baseline. Both the tool itself and the model underlying it will continue to be extended throughout the remainder of this initiative. As results of analyzing inspection effectiveness for defect containment are determined, they can be shared via the tool and also via updates to existing training courses on metrics and software inspections. Moreover, the tool will help satisfy key CMMI requirements for the NASA Centers, as it will enable NASA to take a global view across peer review results for various types of projects to identify systemic problems. This analysis can result in continuous improvements to the approach to verification.

Shull, Forrest↗