Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffractometers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Novel Biocide Based on Cationic Derivative of Psyllium: Surface Modification and Antibacterial Activity

To circumvent the problems (such as volatilization, photolytic decomposition, chemical instability, easy permeability through the skin) associated with low molecular weight antimicrobial agents, our strategy employed graft copolymerization of cationic monomer with the polymeric substrate viz. psyllium husk. The surface graft concentration of quaternary ammonium ion on psyllium was optimized by measuring the extent of grafting in the microwave-induced process. The surface modification of graft copolymers was evident by different physico–chemical techniques like {sup 13}C nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray diffractometer (XRD), differential scanning calorimetry (DSC), Thermo gravimeteric analysis (TGA), and viscometric study. The synthesized water soluble product resulted good antibacterial activity against Gram positive Staphylococcus aureus and Bacillus anthracis but failed to produce any antibacterial activity against Gram negative Salmonella typhi and Escherichia coli. The reason to failure has been explained on the basis of differences in the electrokinetic property between Gram-positive and Gram-negative bacteria. Optimum minimum inhibitory concentration (MIC) for the polymeric grade which showed good biocidal effect evaluated by both zone of inhibition and absorbance is found at 1000 µg/ml.

36 MATERIALS SCIENCE↗

Gelatin/Gelatinized Sago Starch Biomembranes as a Drug Delivery System Using Rubber Latex as Plasticizer

Preparation and properties of gelatin and gelatin/gelatinized sago starch biomembranes as a drug delivery system are presented. Deproteinized natural rubber latex (DNRL) was chosen to blend as a plasticizer in biomembranes due to its elasticity. The opaque biomembranes were formed, and the effect of DNRL amounts (10–50 part per hundred of gelatin; phg) on mechanical properties of biomembranes was investigated. It was discovered that increasing the amounts of DNRL could decrease the brittleness of biomembranes. However, these DNRL blended biomembranes still swelled, dissolved in water, and eroded within 2 h. The 50 phg DNRL was further chosen for biomembrane preparations. Then, the 5–30 phg gelatinized sago starch which was prepared in-house was added. These gelatin/gelatinized sago starch biomembranes were homogenous and opaque. They portrayed good water uptake properties, and the highest values occurred in 20–30 min, then these biomembranes eroded slowly. Increasing the amounts of sago starch in biomembranes raised the water uptake rates but reduced the erosion properties. Biomembranes with and without starch blends showed the same tensile strengths. Their elongations at break increased when the amounts of starch were raised but still were lower than that of gelatin/DNRL biomembranes. The morphology, scanning electron microscopy, atomic force electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimeter, and X-ray diffractometer confirmed the compatibility of ingredients in biomembranes. Lidocaine and its hydrochloride salt were successfully incorporated in these biomembranes with good properties. The drug release and permeation of biomembrane showed good drug controlled release and were able to permeate through the pig skin.

36 MATERIALS SCIENCE↗

Effects of Fe and Co Co-doping on Structural, Magnetic, and Optical Properties of Ti{sub 0.9}Fe{sub 0.1−x}Co{sub x}O{sub 2} Magnetic Semiconductors

A series of six samples with a general formula Ti{sub 0.9}Fe{sub 0.1−x}Co{sub x}O{sub 2} (x = 0.0, 0.02, 0.04, 0.06, 0.08, and 0.1) has been synthesized by solid-state reaction method at annealing temperature of 1150 {sup ∘}C for 2 hours. The synthesized samples have been characterized by X-ray diffractometer, Raman spectroscopy, scanning electron microscopy, EDX, vibrating sample magnetometer, and ultraviolet-visible spectroscopy to investigate structural, defective, morphological, elemental, magnetic, and optical properties. Structural analysis revealed dominant structure of rutile with a minor peak of hematite and anatase. An intensity loss and peak broadening of TiO{sub 2} (rutile) vibration lines has been observed from Raman analysis. Magnetic characterization showed ferromagnetic behavior at room temperature. Optical characterization revealed blue shift in band gap energy with increasing amount of Co concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning of Magnetic and Optical Properties of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} Spinel Ferrite Thin Films Based on Post Annealing Temperature

This paper is dedicated to deposit zinc substituted cobalt ferrite (Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}) thin films on glass substrate using electron beam deposition technique. The effect of post annealing temperature on structural, magnetic, and optical properties of thin films has been investigated. Thin films have been characterized using x-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM), vibrating sample magnetometer (VSM), UV-VIS spectroscopy, and spectroscopic ellipsometry (SE) analysis. The as-deposited thin films are amorphous in nature. After deposition, these thin films post annealed at different temperature ranges from 200 to 500 {sup ∘}C to enhance the crystallinity of films. The film post annealed at 200 {sup ∘}C is also amorphous in nature. As the post annealing temperature increases, the thin films become more crystalline. X-ray diffractometer and Raman analysis confirm the formation of cubical inverse spinel structure of thin films. The saturation magnetization of the thin films decreases with the annealing temperature due to the sites occupancy of cations between tetrahedral and octahedral. The reduction in coercivity is correlated with the anisotropy constant, but the anisotropy value is still high which is suitable to form stable magnetic storage memories. The band gap energy are decreased which is mainly attributed due to increase in grain size of the film. It is noted that the band gap energy of these thin films are higher than that of bulk material, so these may be suggested for use in wide band gap applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

No Signature of Room Temperature Ferromagnetism in Fe-Doped ITO Thin Films

Iron (Fe)-doped indium tin oxide thin films (In{sub 0.95 − x}Fe{sub x}Sn{sub 0.05}){sub 2}O{sub 3} at x = 0.00, 0.05, 0.10, and 0.15 were deposited onto glass substrates using an electron beam evaporation technique. The coated thin films were characterized by X-ray diffractometer (XRD), UV-VIS-NIR spectrophotometer, photoluminescence spectrophotometer, scanning electron microscope, and vibrating sample magnetometer to study their structural, optical, morphological, and magnetic properties, respectively. The crystallite size of the films increased from 18 to 30 nm with Fe concentration (x). The morphology showed the formation of nanorods. The bandgap of the films decreased from 3.94 to 3.81 eV. The X-ray photoelectron spectroscopy (XPS) studies confirm the presence of Fe ions in two different oxidation states (Fe{sup 2+}, Fe{sup 3+}). The magnetic studies revealed the paramagnetic behavior of the films at room temperature and at low temperature (5 K). The effective magnetic moment (μ{sub eff}) of Fe-doped indium tin oxide thin films was calculated using Langevin theory of paramagnetism extending to Curie’s law. The effective magnetic moment (μ{sub eff}) was increased on increasing the dopant concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Characterization and Magnetic Properties of SrCo{sub 2}Fe{sub 16}O{sub 27} Hexaferrite Synthesized by Citric Acid Sol-Gel Method

The W -type SrCo{sub 2}Fe{sub 16}O{sub 27} (SCFO) hexagonal ferrite samples were prepared by the sol-gel method using metal nitrate as raw material, citric acid as complexing agent, and water as solvent. The effects of different sintering temperatures and holding times on the phase composition and morphology properties were explored in detail by using the X-ray diffractometer and field emission scanning electron microscope. The X-ray diffraction, microstructure, and magnetic performance of most optimum sintering temperature and holding time of preparing single-phase SCFO hexagonal ferrite were investigated. The experimental results indicate that the best optimum sintering temperature and holding time of SCFO hexagonal ferrite are 1280 °C and 4 h, respectively. Field emission scanning electron microscopy results indicate that the size of the particles is about 5–10 μ m. The result of magnetic measurement shows that SCFO hexagonal ferrite exhibits the soft magnetic property and the Curie temperature (T{sub C}) is ∼ 850 K. Furthermore, by analyzing the Arrott plot, the phase transition near the T{sub C} is a secondary phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Ce{sup 3+} Ion Doping on Structural and Magnetic Properties of Magnesium Nanoferrite

Pure and rare earth ion Ce{sup 3+}-doped magnesium nanoferrite magnetic particles, i.e., MgFe{sub 2}O{sub 4} and MgCe{sub x}Fe{sub 2−x}O{sub 4} (x = 0.0, 0.025, 0.05, 0.075, and 0.1) were successfully fabricated using sol-gel technique, and qualitative studies were carried out using X-ray diffractometer (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), high-resolution field-emission scanning electron microscopy (HRFESEM) equipped with energy-dispersive spectroscopy (EDS), vibrating sample magnetometer (VSM), and electron paramagnetic resonance (EPR) techniques. X-ray diffraction analysis confirmed the crystalline phase of the synthesized samples with no extra phase. The crystallite size obtained from W-H plots follow the same trend as calculated using Scherrer method, and the strain decreases with increasing Ce{sup 3+} ion concentration indicating a lesser number of deformities. FTIR spectra revealed the shifting of lower-frequency band to the higher side with the larger radii Ce{sup 3+} ions. HRFESEM images reveal the reduction in stress on doping. No additional impurities are observed in synthesized samples as is confirmed by EDS analysis. The average particle size obtained by TEM are in agreement with XRD analysis. EPR studies showed an increase in g value and line width with doping. Magnetic measurements carried out at room temperature reveals the value of magnetization initially decreases up to x = 0.05 and afterwards increases with the addition of Ce{sup 3+} ions. These properties reveal superparamagnetic nature of cerium-doped magnesium nanoparticles and can be suitable for catalyst and humidity sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Evidence of Room Temperature Ferromagnetism in Zn{sub 1−x}Sn{sub x}S Thin Films

Tin (Sn)-doped zinc sulfide (Zn{sub 1−x}Sn{sub x}S) thin films at different tin (Sn) concentrations (= 0.00, 0.02, 0.05, and 0.08) were coated onto Corning 7059 glass substrates using the electron beam evaporation technique. The films were subjected to different characterization techniques to study the physical properties of the thin films. The structural properties of the films were studied using a powder X-ray diffractometer (XRD), and it was found that the films were cubic in structure without any impurity phases. The crystallite size increased with an increase of Sn concentration, and the mean crystallite size was 21 nm. The chemical composition and surface morphology of the films were studied using scanning electron microscopy (FE-SEM) with energy-dispersive analysis of X-rays (EDAX). Optical properties such as transmittance and absorbance were recorded using a diffuse reflectance spectroscope (UV–vis–NIR). All the films exhibited high optical transmittance of 85% in the visible region of the solar spectrum. The band gap of the films was calculated using Tauc’s relation, and it was found that it increased from 3.53 to 3.57 eV with an increase in the Sn doping concentration from x = 0.02 to x = 0.08. The room temperature photoluminescence studies of the films were recorded using a fluorescence spectrophotometer, and it was found that the films exhibited a prominent emission peak at 420 nm. The magnetic properties of the films and glass substrates at room temperature were studied using a vibrating sample magnetometer. From this, it was found that the films were weakly ferromagnetic at room temperature and the strength of magnetization increased with an increase of doping concentration from x = 0.02 to x = 0.05 and decreased at higher doping concentrations (x = 0.08). The films showed high magnetization at x = 0.05. The films at x = 0.05 exhibited the magnetization (M{sub s}), retentivity (M{sub r}), and coercive fields (H{sub c}) 18 × 10{sup − 6} emu/cm{sup 3}, 1.6 × 10{sup − 6} emu/cm{sup 3}, and 91.80 Oe, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First in-situ lattice strains measurements under load at VULCAN

The engineering materials diffractometer, VULCAN, at the Spallation Neutron Source began commissioning on June 26, 2009. This instrument is designed for materials science and engineering studies. In situ lattice strain measurements of a model metallic material under monotonic tensile load have been performed on VULCAN. The tensile load was applied under two different strain rates, and neutron diffraction measurements were carried out in both high-intensity and high-resolution modes. These experiments demonstrated VULCAN's in situ study capability of deformation behaviors even during the early phases of commissioning.

43 PARTICLE ACCELERATORS↗

Effect of Cerium Oxide on Morphologies and Electrochemical Properties of Ni-W-P Coating on AZ91D Magnesium

AZ91D magnesium alloy substrate was first pretreated in a phosphoric acid to obtain a phosphate coating, and then, the electroless ternary Ni-W-P coating was deposited using a sulfate nickel bath. The morphologies of the Ni-W-P coating were observed by using scanning electron microscope, the deposition rate of the coating was examined with the method of gravimetric analysis, and the phase analysis was identified by x-ray diffractometer. Electrochemical property was tested by means of an electrochemical analyzer. The results indicated that the addition of an optimum concentration of CeO{sub 2} (cerium oxide) particles could evidently improve the deposition rate and the stability of the plating bath. However, it acted as an inhibiting effect as the concentration of CeO{sub 2} particles exceeded to 8 mg/L in the sulfate nickel bath. The results also revealed that the morphology of Ni-W-P coating became more smooth, compact and uniform with the increase in the concentrations of CeO{sub 2} particles in the bath, but the corrosion resistance decreased due to the precipitation of crystal phases (Ni{sub 3}P, Ni{sub 4}W, etc.) after heat treatment.

36 MATERIALS SCIENCE↗

Synthesis of Flexible Graphene/Polymer Composites for Supercapacitor Applications

In this paper, the graphene was synthesized using biocompatible cellulosic component from onions. Onion epidermal cells were chosen as raw material. During heating at high temperature, the bonding among atoms in material was rearranged and forms two-dimensional hexagonal carbon layer (graphene). The characterization of synthesized graphene was done by x-ray diffractometer, Raman spectrometer and field emission scanning electron microscopy, respectively. An attempt has been taken to form the capacitors with two different current collector electrodes, anticipating the performance of the supercapacitors. The observed capacitance values as-obtained for Al and Au current collector were 1.3 μF and 6.08 μF, respectively. However, when thermally exfoliated graphene was used as an electrode on Al and Au current collector, the capacitance value was drastically increased and found to be 1.6 and 41.25 μF, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of Micro-arc Oxidation Coatings on 6N01 Aluminum Alloy Under Different Electrolyte Temperature Control Modes

The micro-arc oxidation coatings of 6N01 aluminum alloy produced under different control modes of the electrolyte temperature are discussed in detail. Compared to those coated by a thermostatically controlled treatment, the coatings had different surface characterizations when they were coated without controlling the electrolyte temperature, particularly after treatment involving boiling electrolytes. Scanning electron microscopy and confocal laser scanning microscopy were used to observe the morphology of the coatings. Energy-dispersive spectrometry and x-ray diffractometer were used to characterize their elemental and crystalline phase compositions. The results indicate that the treatment without a controlled electrolyte temperature ultimately led to a thicker and rougher film with a respectably thick inner barrier film, a lower content of γ-Al{sub 2}O{sub 3} and better corrosion resistance.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of Stainless Steel/Brass Joints Brazed by Sn-Electroplated Ag Brazing Filler Metals

To develop a high-Sn-content AgCuZnSn brazing filler metal, the BAg50CuZn was used as the base filler metal and a Sn layer was electroplated upon it. Then, the 304 stainless steel and the H62 brass were induction-brazed with the Sn-plated brazing filler metals. The microstructures of the joints were examined with an optical microscope, a scanning electron microscope and an x-ray diffractometer. The corresponding mechanical properties were obtained with a universal tensile testing machine. The results indicated that the induction brazed joints consisted of the Ag phase, the Cu phase and the CuZn phase. When the content of Sn in the Sn-plated Ag brazing filler metal was 6.0 or 7.2 wt.%, the Cu{sub 5}Zn{sub 8}, the Cu{sub 41}Sn{sub 11} and the Ag{sub 3}Sn phases appeared in the brazed joint. The tensile strength of the joints brazed with the Sn-plated filler metal was higher compared to the joints with the base filler metal. When the content of Sn was 6.0 wt.%, the highest tensile strength of the joint reached to 395 MPa. The joint fractures presented a brittle mode, mixed with a low amount of ductile fracture, when the content of Sn exceeded 6.0 wt.%.

36 MATERIALS SCIENCE↗

Synthesis, Characterization and Comparative Luminescence Studies of Rare-Earth-Doped Gd{sub 2}O{sub 3} Nanoparticles

A facile direct precipitation method was used for the synthesis of luminescence nanomaterial. Gd{sub 2}O{sub 3} doped with rare earth element Eu{sup 3+} is synthesized by polyol route. The synthesized nanoparticles show their characteristic red emission. The nanoparticles are characterized by x-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and photoluminescence (PL) study. The synthesized nanoparticles are spherical particles with ~ 30 nm size. The photoluminescence studies show the characteristic Eu{sup 3+} red emission. The PL study shows the intensity of the magnetic dipole transition ({sup 5}D{sub 0}→ {sup 7}F{sub 1}) at 592 nm compared to that of the electronic dipole transition ({sup 5}D{sub 0}→ {sup 7}F{sub 2}) at 615 nm. The nanomaterials can show significant application in various display devices and biomedical applications for tracking.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Friction and Wear Properties of CrSiCN/SiC Tribopairs in Water Lubrication

CrSiCN coatings (3.4 at.% Si) were prepared on 316L stainless steels using unbalanced magnetron sputtering. According to the analysis results of x-ray diffractometer and x-ray photoelectrons spectroscopy, silicon in CrSiCN coatings mainly presented in the amorphous forms of a-SiN, a-SiCN and a-SiC. The hardness and Young’s modulus of CrSiN coatings were 19.4 ± 0.6 and 306.1 ± 5.9 GPa, respectively. In addition, the ball-on-disk sliding tests of CrSiCN/SiC tribopairs were performed in distilled water at varying velocities (0.1-0.5 m/s) and loads (2-12 N). The friction coefficient of tribopairs presented a decreasing trend with respect to velocity at low applied loads (≤ 4 N). To be specific, the low friction coefficient of 0.05-0.14 accompanied with polished wear scar was obtained at high velocities and low loads. Finally, the wear mechanism map of CrSiCN/SiC tribopairs was proposed based on a combination of friction coefficient, wear scar morphology and wear rates of tribopairs.

36 MATERIALS SCIENCE↗

Studies on Enhancement of Silt Erosion Resistance of 13/4 Martensitic Stainless Steel by Low-Temperature Salt Bath Nitriding

Low-temperature salt bath nitriding of heat treated and tempered 13/4 Martensitic stainless steel (13/4HTT) was carried at 450 °C (N450) and 500 °C (N500) for 10 h each. The nitrided samples were characterized by using x-ray diffractometer, field emission scanning electron microscope and optical microscope. The nanohardness and elastic modulus of the cross section of nitrided specimen were measured by nanoindentation test using Hysitron TI950 triboindenter. The nitrided 13/4HTT (N450 and N500) and 13/4HTT specimens were subjected to slurry erosion test in a slurry pot tester. The test was conducted for 48 h, and weight loss was measured after every 6 h. The relative speed of slurry with respect to specimen was 4.55 m/s. It was found that the weight loss due to erosion of the N450 is 83% less than that of 13/4HTT and that of N500 was 92% more than that of 13/4HTT. The erosion mechanism is correlated to the phases present in the specimens. The improvement in the slurry erosion resistance of N450 is due to presence of expanded martensite (α{sub N}-Fe). Increasing the temperature of nitriding to 500 °C led to the decrease in the slurry erosion resistance of N500 due to the formation of brittle CrN phase.

36 MATERIALS SCIENCE↗

Effects of Heating and Quenching Processing Parameters on Phase Transformation of 55CrMo Steel

Microstructure and mechanical properties after induction hardening have a significant effect on the wear resistance performance and lifetime of 55CrMo steel ball screw. In the paper, the dilatometric curves were recorded at the different heating rate by a Gleeble-1500D thermo-mechanical simulator to determine the effect of heating rate on the austenitizing temperature of 55CrMo steel. Heat treatment of some specimens was performed by the Gleeble-1500D thermal simulator at the different heating temperature, holding time and cooling rate to investigate the effect of induction hardening parameters on the phase transformation, microstructure and microhardness of 55CrMo steel. Microstructure of specimen was analyzed using an optical microscope and a scanning electron microscope. Volume fraction of retained austenite was measured using an x-ray diffractometer. The mechanical properties were evaluated by a microhardness tester. The results show that the austenitizing temperature of 55CrMo steel increases with the increasing heating rate. Increasing the heating temperature, holding time and cooling rate of specimen is helpful in obtaining a uniform cryptocrystalline martensite. Volume fraction of retained austenite is less as the heating temperature is in the range of 900-950 °C. In the induction hardening of 55CrMo steel, the heating temperature should be in the range of 900-1000 °C.

36 MATERIALS SCIENCE↗

Effects of Different Variants of Plasma Nitriding on the Properties of the Nitrided Layer

Several process variants of plasma nitriding can be distinguished depending on the location of the voltage introduction. The aim of this study is to compare three different variants of plasma nitriding (DC plasma nitriding, active screen plasma nitriding, and active screening process with bias voltage application) extended by the study of the coverage of active screen on C45E unalloyed steel, using two different N{sub 2}-H{sub 2} gas mixtures. The thickness of the compound layer was measured using a scanning electron microscope, the phase analysis was performed by an x-ray diffractometer, and the nitrogen contents were analyzed by glow discharge optical electron spectroscopy. The results showed that the layer thickness and the surface hardness were higher by using active screen-biased plasma nitriding with high N{sub 2} content gas mixture. Besides, the lid of the active screen did not influence significantly the chemical composition of the compound layer.

36 MATERIALS SCIENCE↗