SEARCH · Search NASA

Results for “Dimensionality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Topology of three-dimensional separated flows

A Legendre formulation for a pattern of streamlines adjacent to a surface considered as trajectories with properties consistent with those of a constant vector field is used to develop a mathematical framework for three-dimensional separated flows. Convergence of skin-friction lines onto a particular skin-friction line originating from a particular saddle point is defined as a necessary condition for flow separation. Steady, three-dimensional flow is considered, and singular points occurring in the skin-friction lines are shown to happen where the skin friction or the surface vorticity become zero, and become nodal or saddle points. The separation initiates and continues only globally, as a mixture of an infinite set of friction lines, or locally, with one line. The topography of streamlines in two-dimensional sections of three-dimensional flows is discussed, and examples are provided of a round-nosed body of revolution at varying angles of attack.

Tobak, M.↗

NASA NTRS1983

Digital Filters for Two-Dimensional Data

Computational efficient filters speed processing of two-dimensional experimental data. Two-dimensional smoothing filter used to attenuate highfrequency noise in two-dimensional numerical data arrays. Filter provides smoothed data values equal to values obtained by fitting surface with secondand third-order terms to 5 by 5 subset of data points centered on points and replacing data at each point by value of surface fitted at point. Especially suited for efficient analysis of two-dimensional experimental data on images.

Edwards, T. R.↗

NASA NTRS1982

The problem of dimensional instability in airfoil models for cryogenic wind tunnels

The problem of dimensional instability in airfoil models for cryogenic wind tunnels is discussed in terms of the various mechanisms that can be responsible. The interrelationship between metallurgical structure and possible dimensional instability in cryogenic usage is discussed for those steel alloys of most interest for wind tunnel model construction at this time. Other basic mechanisms responsible for setting up residual stress systems are discussed, together with ways in which their magnitude may be reduced by various elevated or low temperature thermal cycles. A standard specimen configuration is proposed for use in experimental investigations into the effects of machining, heat treatment, and other variables that influence the dimensional stability of the materials of interest. A brief classification of various materials in terms of their metallurgical structure and susceptability to dimensional instability is presented.

Wigley, D. A.↗

NASA NTRS1981

Recursive algorithms for two-dimensional smoothing using bicubic hermite polynomial

It is noted that in the past, smoothing splines originated from approximation theory have been successfully applied to data filtering and image smoothing problems. Even though the nonrecursive technique of smoothing splines gives an optimal solution, the amount of computation increases rapidly with the size of the two-dimensional data. A derivation is presented here of quarter-plane filtering algorithms that provide smoothed estimates of function values and their derivatives by fitting two-dimensional smoothing splines in a recursive manner. The derivation procedure sheds light on specific problems encountered in two-dimensional filtering problems. What is more, the amount of computation for this recursive processor increases only linearly with the size of the two-dimensional data. Because of certain approximations introduced in its derivation, this recursive processor becomes suboptimal.

Kim, C. S.↗

NASA NTRS1982

Near-wall similarity in the three-dimensional turbulent boundary layers. III - Shear-driven flow results

Ten of eleven proposed three-dimensional similarity models identified in the literature are evaluated with direct wall shear, velocity field, and pressure gradient data from a three-dimensional shear-driven boundary layer flow. Results define an upper limit on velocity vector skewing for each model's predictive ability. When combined with earlier results for pressure-driven flows, each model's predictive ability with and without pressure gradients is summarized. The utility of some two-dimensional type indirect wall shear measurement methods and wall shear inference methods from near-wall velocity measurements for three-dimensional flows is also discussed.

Pierce, F. J.↗

NASA NTRS1983

A parallel-pipeline architecture of the fast polynomial transform for computing a two-dimensional cyclic convolution

It is pointed out that the two-dimensional cyclic convolution is a useful tool for many two-dimensional digital signal processing applications. Two important applications are related to spaceborne high-resolution synthetic aperture radar (SAR) processing and image processing. Nussbaumer and Quandalle (1978) showed that a radix-2 polynomial transform analogous to the conventional radix-2 FFT algorithm can be used to compute a two-dimensional cyclic convolution. On the basis of results reported by Arambepola and Rayner (1979), a radix-2 polynomial transform can be defined to compute a multidimensional cyclic convolution. Truong et al. (1981) used the considered ideas together with the Chinese Theorem to further reduce the complexity of the radix-2 fast polynomial transform (FPT). Reed et al. (1981) demonstrated that such a new FPT algorithm is significantly faster than the FFT algorithm for computing a two-dimensional convolution. In the present investigation, a parallel-pipeline architecture is considered for implementing the FPT developed by Truong et al.

Truong, T. K.↗

NASA NTRS1982

Numerical generation of composite three dimensional grids by quasilinear elliptic systems

A three-dimensional grid generation technique designed to numerically construct a boundary-conforming grid within a three-dimensional region bounded by a closed surface is described. The boundary values are generated numerically by a modified elliptic system and are used to compute grid control parameters that are contained in the elliptic systems. The interior grid distribution is governed by the distribution of points on the boundary as well as by the boundary's geometric shape. The composite three-dimensional grid remains both continuous and smooth across the surface of juncture between any two adjoining subregions. The details of the method and its implementation are presented, displaying numerical results for three-dimensional composite grid for a wing-body combination and surface grids.

Thomas, P. D.↗

NASA NTRS1984

A three-dimensional nonlinear analysis of cross-ply rectangular composite plates

The results of a three-dimensional, geometrically nonlinear, finite-element analysis of the bending of cross-ply laminated anisotropic composite plates are presented. Individual laminae are assumed to be homogeneous, orthotropic and linearly elastic. A fully three-dimensional isoparametric finite element with eight nodes (i.e. linear element) and 24 degrees of freedom (three displacement components per node) is used to model the laminated plate. The finite element results of the linear analysis are found to agree very well with the exact solutions of cross-ply laminated rectangular plates under sinusoidal loading. The finite element results of the three-dimensional, geometrically nonlinear analysis are compared with those obtained by using a shear deformable, geometrically nonlinear, plate theory. It is found that the deflections predicted by the shear deformable plate theory are in fair agreement with those predicted by three-dimensional elasticity theory; however stresses were found to be not in good agreement.

Kuppusamy, T.↗

NASA NTRS1984

Aerodynamic design for improved manueverability by use of three-dimensional transonic theory

Improvements in transonic maneuver performance by the use of three-dimensional transonic theory and a transonic design procedure were examined. The FLO-27 code of Jameson and Caughey was used to design a new wing for a fighter configuration with lower drag at transonic maneuver conditions. The wing airfoil sections were altered to reduce the upper-surface shock strength by means of a design procedure which is based on the iterative application of the FLO-27 code. The plan form of the fighter configuration was fixed and had a leading edge sweep of 45 deg and an aspect ratio of 3.28. Wind-tunnel tests were conducted on this configuration at Mach numbers from 0.60 to 0.95 and angles of attack from -2 deg to 17 deg. The transonic maneuver performance of this configuration was evaluated by comparison with a wing designed by empirical methods and a wing designed primarily by two-dimensional transonic theory. The configuration designed by the use of FLO-27 had the same or lower drag than the empirical wing and, for some conditions, lower drag than the two-dimensional design. From some maneuver conditions, the drag of the two-dimensional design was somewhat lower.

Mann, M. J.↗

NASA NTRS1984

The Goertler vortex instability mechanism in three-dimensional boundary layers

The two dimensional boundary layer on a concave wall is centrifugally unstable with respect to vortices aligned with the basic flow for sufficiently high values of the Goertler number. However, in most situations of practical interest the basic flow is three dimensional and previous theoretical investigations do not apply. The linear stability of the flow over an infinitely long swept wall of variable curvature is considered. If there is no pressure gradient in the boundary layer the instability problem can always be related to an equivalent two dimensional calculation. However, in general, this is not the case and even for small values of the crossflow velocity field dramatic differences between the two and three dimensional problems emerge. When the size of the crossflow is further increased, the vortices in the neutral location have their axes locally perpendicular to the vortex lines of the basic flow.

Hall, P.↗

NASA NTRS1985

Approximation of Optimal Infinite Dimensional Compensators for Flexible Structures

The infinite dimensional compensator for a large class of flexible structures, modeled as distributed systems are discussed, as well as an approximation scheme for designing finite dimensional compensators to approximate the infinite dimensional compensator. The approximation scheme is applied to develop a compensator for a space antenna model based on wrap-rib antennas being built currently. While the present model has been simplified, it retains the salient features of rigid body modes and several distributed components of different characteristics. The control and estimator gains are represented by functional gains, which provide graphical representations of the control and estimator laws. These functional gains also indicate the convergence of the finite dimensional compensators and show which modes the optimal compensator ignores.

Gibson, J. S.↗

NASA NTRS1985

Stable Direct Adaptive Control of Linear Infinite-dimensional Systems Using a Command Generator Tracker Approach

A command generator tracker approach to model following contol of linear distributed parameter systems (DPS) whose dynamics are described on infinite dimensional Hilbert spaces is presented. This method generates finite dimensional controllers capable of exponentially stable tracking of the reference trajectories when certain ideal trajectories are known to exist for the open loop DPS; we present conditions for the existence of these ideal trajectories. An adaptive version of this type of controller is also presented and shown to achieve (in some cases, asymptotically) stable finite dimensional control of the infinite dimensional DPS.

Balas, M. J.↗

NASA NTRS1985

Computation of three-dimensional shock wave and boundary-layer interactions

Computations of the impingement of an oblique shock wave on a cylinder and a supersonic flow past a blunt fin mounted on a plate are used to study three dimensional shock wave and boundary layer interaction. In the impingement case, the problem of imposing a planar impinging shock as an outer boundary condition is discussed and the details of particle traces in windward and leeward symmetry planes and near the body surface are presented. In the blunt fin case, differences between two dimensional and three dimensional separation are discussed, and the existence of an unique high speed, low pressure region under the separated spiral vortex core is demonstrated. The accessibility of three dimensional separation is discussed.

Hung, C. M.↗

NASA NTRS1983

A finite element solution of three-dimensional inviscid rotational flows through curved ducts

A previously developed two-dimensional finite element algorithm for the solution of steady Euler equations is extended to three-dimensional problems. Starting with the general three-dimensional problem, the formulation of steady, rotational flows is presented. The boundary conditions for steady flows where the rotationality is introduced through entropy or total enthalpy gradients are introduced. A three-dimensional flow through a curved duct is analyzed as a sample problem, demonstrating the efficiency of the relaxation scheme. The accuracy of the numerical results is investigated by calculating the velocity and vorticity distributions at different sections of the channel, including the exit.

Ecer, A.↗

NASA NTRS1985

Application of axisymmetric analogue for calculating heating in three-dimensional flows

A rapid, approximate method has been developed for calculating the heating rates on three-dimensional vehicles such as the Space Shuttle Orbiter and other advanced reentry configurations. The method is based on the axisymmetric analogue for three-dimensional boundary layers. It uses information obtained from a three-dimensional inviscid flowfield solution, such as HALIS, to calculate inviscid surface streamlines along which approximate heating rates are calculated independent of what happens along other streamlines. Three-dimensional effects are included through the metric coefficient that describes the divergence or convergence of streamlines. Boundary-layer edge properties are obtained from the inviscid flowfield solution by interpolating in the inviscid flowfield at a distance equal to the boundary-layer thickness away from the wall. This accounts, approximately, for the variable boundary-layer edge entropy. Using this method, heating calculations can be made along a typical streamline in a few seconds. This method has been used to accurately predict heating rates for simple shapes such as a spherically blunted cone and more complex shapes such as the Shuttle Orbiter for a variety of wind-tunnel and flight conditions. A unique feature of the method is its ability to accurately predict heating rates on the Shuttle Orbiter wing.

Hamilton, H. H.↗

NASA NTRS1985

Three-dimensional viscous-shock-layer applications for the Space Shuttle orbiter

A nonorthogonal three-dimensional viscous-shock-layer code was modified and used to compute the windward surface flowfield over a Shuttle-like configuration. Code modifications were made in the methods used to evaluate shock boundary conditions and in the implementation of the equilibrium air models. Additional viscous terms were also retained in the governing equations. Effects of these modifications are demonstrated. Three-dimensional flowfield solutions obtained with the modified code showed good comparison of surface heating and pressure with actual flight data. An apparently three-dimensional effect, characterized by a drop in surface heating on the Shuttle windward centerline in the wing root area, was predicted by the present method. A preliminary review of Shuttle ground-based experimental and flight data confirmed this trend. The present three-dimensional solutions were also compared with the predictions of several approximate methods. Those comparisons showed the approximate methods to be valid for predicting heating along the Shuttle windward centerline uner both perfect gas and equilibrium air conditions.

Thompson, R. A.↗

NASA NTRS1985

The Goertler vortex instability mechanism in three-dimensional boundary layers

The two-dimensional boundary layer on a concave wall is centrifugally unstable with respect to vortices aligned with the basic flow for sufficiently high values of the Goertler number. However, in most situations of practical interest the basic flow is three-dimensional and previous theoretical investigations do not apply. The linear stability of the flow over an infinitely long swept wall of variable curvature is considered. If there is no pressure gradient in the boundary layer the instability problem can always be related to an equivalent two-dimensional calculation. However, in general, this is not the case and even for small values of the crossflow velocity field dramatic differences between the two and three-dimensional problems emerge. When the size of the crossflow is further increased, the vortices in the neutral location have their axes locally perpendicular to the vortex lines of the basic flow.

Hall, P.↗

NASA NTRS1986

Three-Dimensional Radiative-Transfer Equation

Progress made toward interpretation of radiometric observations. Paper discusses equation of radiative transfer in three-dimensional, inhomogeneous, scattering medium illuminated from above and bounded below by laterallyinhomogeneous, reflective plane. Representation of radiation field with full three-dimensional variability derived by use of spatial Fourier transform and matrix-operator techniques developed previously for one-dimensional version of problem. Equations useful for radiometric measurements from aircraft and spacecraft. Although derivations and resulting equations complicated, use of Fourier-transform, matrix-operator approach to solve practical problems simpler than direct solution of complete three-dimensional, linear wave equations.

Martonchik, J. V.↗