Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Weighted Non-linear Compact Schemes for the Direct Numerical Simulation of Compressible, Turbulent Flows

A new class of compact-reconstruction weighted essentially non-oscillatory (CRWENO) schemes were introduced (Ghosh and Baeder in SIAM J Sci Comput 34(3): A1678–A1706, 2012) with high spectral resolution and essentially non-oscillatory behavior across discontinuities. The CRWENO schemes use solution-dependent weights to combine lower-order compact interpolation schemes and yield a high-order compact scheme for smooth solutions and a non-oscillatory compact scheme near discontinuities. The new schemes result in lower absolute errors, and improved resolution of discontinuities and smaller length scales, compared to the weighted essentially non-oscillatory (WENO) scheme of the same order of convergence. Several improvements to the smoothness-dependent weights, proposed in the literature in the context of the WENO schemes, address the drawbacks of the original formulation. This paper explores these improvements in the context of the CRWENO schemes and compares the different formulations of the non-linear weights for flow problems with small length scales as well as discontinuities. Simplified one- and two-dimensional inviscid flow problems are solved to demonstrate the numerical properties of the CRWENO schemes and its different formulations. Canonical turbulent flow problems—the decay of isotropic turbulence and the shock-turbulence interaction—are solved to assess the performance of the schemes for the direct numerical simulation of compressible, turbulent flows

97 MATHEMATICS AND COMPUTING↗

Direct numerical simulations of a reacting mixing layer with chemical heat release

In order to study the coupling between chemical heat release and fluid dynamics, direct numerical simulations of a chemically reacting mixing layer with heat release are performed. The fully compressible equations as well as an approximate set of equations that is asymptotically valid for low-Mach-number flows are treated. These latter equations have the computational advantage that high-frequency acoustic waves have been filtered out, allowing much larger time steps to be taken in the numerical solution procedure. A detailed derivation of these equations along with an outline of the numerical solution technique is given. Simulation results indicate that the rate of chemical product formed, the thickness of the mixing layer, and the amount of mass entrained into the layer all decrease with increasing rates of heat release.

Mcmurtry, P. A.↗

Direct numerical simulation of the transitional zone

Properties of the transitional zone in channel and boundary-layer flow are determined from the results of direct numerical simulations of forced transition. Three channel flow cases produce similar behavior, particularly in the 'transition function' relevant for some algebraic eddy viscosity models of the transitional zone. Moreover, the transitional zone from the computed forced boundary-layer transition is qualitatively similar to experimental data for natural transition and to the computed channel flow transition.

Zang, Thomas A.↗

Direct Numerical Simulation of Turbulent Condensation in Clouds

In this brief, we investigate the turbulent condensation of a population of droplets by means of a direct numerical simulation. To that end, a coupled Navier-Stokes/Lagrangian solver is used where each particle is tracked and its growth by water vapor condensation is monitored exactly. The main goals of the study are to find out whether turbulence broadens the droplet size distribution, as observed in in situ measurements. The second issue is to understand if and for how long a correlation between the droplet radius and the local supersaturation exists for the purpose of modeling sub-grid scale microphysics in cloud-resolving codes. This brief is organized as follows. In Section 2 the governing equations are presented, including the droplet condensation model. The implementation of the forcing procedure is described in Section 3. The simulation results are presented in Section 4 together with a sketch of a simple stochastic model for turbulent condensation. Conclusions and the main outcomes of the study are given in Section 5.

Shariff, K.↗

A direct numerical simulation study for confined non-isothermal jet impingement at moderate nozzle-to-plate distances: Capturing jet-to-ambient density effects

A direct numerical simulation (DNS) campaign is deployed for a series of confined downward oriented, non-isothermal turbulent impinging jet configurations. A baseline Reynolds number of 9960 is obtained through a precursor DNS pipe flow simulation (Re τ = 505). Three jet temperature configurations (confinement height to nozzle diameter of three) enter a cylindrical domain that share ambient and impingement plate temperatures (298.15 K). The range of jet temperatures are crafted such that the ratio of inlet to ambient density varies from unity to 0.52, showcasing the effect of density disparity on flow characteristics such as core collapse, radial mixing of momentum and energy, near-wall stagnation behavior, wall-jet profiles, and large-scale vortical structures. Surface quantities provided include mean radial heat flux and wall-shear stress profiles, and heat flux histograms at select radial stations. Results showcase increased radial normal stresses for higher temperature jets that support increased mixing, resulting in large-scale recirculation structures that are smaller, while retaining similar normalized radial wall profiles for shear stress, heat flux and pressure. Furthermore, radial plots for wall shear stress and Nusselt number showcase strong radial decay as compared to previous configurations that share similar jet and ambient temperatures. For the 373.15 K case, a Gaussian-like histogram for heat fluxes at the impingement plate transitions to a log-normal profile as radial distances increase. In contrast, the 573.15 K configuration displays a bi-modal heat flux characteristic at the impingement plate, and in similar manner to the moderate temperature counterpart, transitions to a log-normal profile at larger radial distances.

33 ADVANCED PROPULSION SYSTEMS↗

Three-dimensional direct numerical simulation of turbulent lean premixed methane combustion with detailed kinetics

The interaction of maintained homogeneous isotropic turbulence with lean premixed methane flames is investigated using direct numerical simulation with detailed chemistry. The conditions are chosen to be close to those found in atmospheric laboratory experiments. As the Karlovitz number is increased from 1 to 36, the preheat zone becomes thickened, while the reaction zone remains largely unaffected. A negative correlation of fuel consumption with mean flame surface curvature is observed. With increasing turbulence intensity, the chemical composition in the preheat zone tends towards that of an idealised unity Lewis number flame, which we argue is the onset of the transition to distributed burning, and the response of the various chemical species is shown to fall into broad classes. Smaller-scale simulations are used to isolate the specific role of species diffusion at high turbulent intensities. Diffusion of atomic hydrogen is shown to be related to the observed curvature correlations, but does not have significant consequential impact on the thickening of the preheat zone. It is also shown that susceptibility of the preheat zone to thickening by turbulence is related to the 'global' Lewis number (the Lewis number of the deficient reactant); higher global Lewis number flames tend to be more prone to thickening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A direct numerical simulation of Jet A flame kernel quenching

The safe operation of aeronautical engines requires an understanding of flame ignition, propagation and extinction. In this study, direct numerical simulations are performed using a 29 species reduced chemical mechanism for jet fuel surrogate Jet A to understand the flame quenching process. Here, initially laminar spherical flames of varying sizes and equivalence ratios are subject to an identical periodic domain of decaying and isotropic high intensity turbulence with a turbulent Reynolds number of 2400. All cases become quenched, except for the larger kernel with lower Karlovitz number. An analysis of the flame structure shows broadened preheat zone, flame shortening on the product side, differential species diffusion and partial fuel pyrolysis in the fresh mixture. Two extinction mechanisms are identified arising from flame shortening and high flame stretch. Flame shortening occurs due to turbulence-chemistry interactions that resemble the flame–flame interaction in a laminar counterflow reactant-to-reactant configuration, which contorts and breaks up the ignition kernel. Flame stretch is a local effect that attenuates the heat release rate and causes the flame to retreat towards the product mixtures, similar to what has been observed for reactant-to-product laminar counterflow flames. Chemical explosive mode analysis was also performed to quantify the flame structure and local combustion mode. The diffusion–reaction balance in pinched-off flame islands favors extinction of these smaller structures, while auto-ignition modes are observed within the flame kernel after fresh mixture is engulfed and preheated in the product kernel. Statistics of the density-weighted displacement speed conditional on local combustion mode indicates strong correlation between the local extinction mode and negative displacement speed. The local balance between diffusion and reaction ultimately determines the propensity for local extinction in both laminar and turbulent flames, the extent of which has an impact on global flame propagation.

42 ENGINEERING↗

Ephemeral antibubbles: Spatiotemporal evolution from direct numerical simulations

Antibubbles, which consist of a shell of a low-density fluid inside a high-density fluid, have several promising applications. We show, via extensive direct numerical simulations (DNSs), in both two and three dimensions, that the spatiotemporal evolution of antibubbles can be described naturally by the coupled Cahn-Hilliard-Navier-Stokes (CHNS) equations for a binary fluid. Our DNSs capture elegantly the gravity-induced thinning and breakup of an antibubble via the time evolution of the Cahn-Hilliard scalar-order-parameter field $\phi$, which varies continuously across interfaces, so we do not have to enforce complicated boundary conditions at the moving antibubble interfaces. To ensure that our results are robust, we supplement our CHNS simulations with sharp-interface volume-of-fluid DNSs. We track the thickness of the antibubble and calculate the dependence of the lifetime of an antibubble on several parameters; we show that our DNS results agree with various experimental results; in particular, the velocity with which the arms of the antibubble retract after breakup scales as σ 1/2 , where σ is the surface tension.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of subgrid-scale eddy viscosity with use of results from direct numerical simulations

Without resort to any modeling, subgrid-scale eddy viscosity is computed from the results of high-resolution (64 cubed and 128 cubed grid points) direct numerical simulations of three-dimensional homogeneous isotropic decaying turbulence. In these simulations the eddy viscosity peaks sharply at the cutoff wavenumber, in rough agreement with the results of Kraichnan (1976). In addition, in the low-wavenumber range the eddy viscosity may be negative, contrary to the generally accepted concept of subgrid-scale eddy viscosity. Some possible explanations of this behavior are discussed.

Domaradzki, J. Andrzej↗

Direct Numerical Simulation of Hypersonic Turbulent Boundary Layer inside an Axisymmetric Nozzle

As a first step toward a study of acoustic disturbance field within a conventional, hypersonic wind tunnel, direct numerical simulations (DNS) of a Mach 6 turbulent boundary layer on the inner wall of a straight axisymmetric nozzle are conducted and the results are compared with those for a flat plate. The DNS results for a nozzle radius to boundary-layer thickness ratio of 5:5 show that the turbulence statistics of the nozzle-wall boundary layer are nearly unaffected by the transverse curvature of the nozzle wall. Before the acoustic waves emanating from different parts of the nozzle surface can interfere with each other and undergo reflections from adjacent portions of the nozzle surface, the rms pressure fluctuation beyond the boundary layer edge increases toward the nozzle axis, apparently due to a focusing effect inside the axisymmetric configuration. Spectral analysis of pressure fluctuations at both the wall and the freestream indicates a similar distribution of energy content for both the nozzle and the flat plate, with the peak of the premultiplied frequency spectrum at a frequency of [(omega)(delta)]/U(sub infinity) approximately 6.0 inside the free stream and at [(omega)(delta)]/U(sub infinity) approximately 2.0 along the wall. The present results provide the basis for follow-on simulations involving reverberation effects inside the nozzle.

Huang, Junji↗

Grid resolution requirement for resolving rare and high intensity wall-shear stress events in direct numerical simulations

Turbulent signals are intermittent with large instantaneous fluctuations. Such large fluctuations lead to small Kolmogorov scales that are hard to resolve in numerical simulations [P. K. Yeung, K. R. Sreenivasan, and S. B. Pope, Effects of finite spatial and temporal resolution in direct numerical simulations of incompressible isotropic turbulence, Phys. Rev. Fluids 3, 064603 (2018)]. Here, the present paper follows the above basic logic, but instead of dissipation events in isotropic turbulence, we study wall-shear stress events in plane channel flow. Wall-shear stress fluctuations are increasingly more intermittent as the Reynolds number increases. Hence, one has to employ higher grid resolutions as the Reynolds number increases in order to resolve a given percentage of wall-shear stress events. The objective of this paper is to quantify effects of the grid resolutions on the rare and high intensity wall-shear stress events. We find that the standard grid resolution resolves about 99% of the wall-shear stress events at Re τ = 180. A slightly higher grid resolution has to be employed in order to resolve 99% of the wall-shear stress events at higher Reynolds numbers, and if the standard grid resolution is used for, e.g., a Re τ = 10000 channel flow, one resolves about 90%–95% wall-shear stress events.

42 ENGINEERING↗

Direct numerical simulation of hot jets

The ultimate motivation of this work is to investigate the stability of two dimensional heated jets and its implications for aerodynamic sound generation from data obtained with direct numerical simulations (DNS). As pointed out in our last report, these flows undergo two types of instabilities, convective or absolute, depending on their temperature. We also described the limits of earlier experimental and theoretical studies and explained why a numerical investigation could give us new insight into the physics of these instabilities. The aeroacoustical interest of these flows was also underlined. In order to reach this goal, we first need to succeed in the DNS of heated jets. Our past efforts have been focused on this issue which encountered several difficulties. Our numerical difficulties are directly related to the physical problem we want to investigate since these absolutely or almost absolutely unstable flows are by definition very sensitive to the smallest disturbances and are very likely to reach nonlinear saturation through a numerical feedback mechanism. As a result, it is very difficult to compute a steady laminar solution using a spatial DNS. A steady state was reached only for strongly co-flowed jets, but these flows are almost equivalent to two independent mixing layers. Thus they are far from absolute instability and have much lower growth rates.

Jacob, Marc C.↗

Direct Numerical Simulation of Fog Formation Within the Surface Layer

We investigate the effects of shear-driven turbulence on fog formation in the stably stratified surface layer, using recent direct numerical simulations (DNS) of dry and moist open-channel flows. A constant cooling rate applied at the ground mimics longwave radiative cooling, leading to either turbulent (weakly stable) or laminar (very stable) flows. The transition of the Obukhov, Ozmidov and buoyancy length scales are investigated for different cooling rates and Reynolds numbers. Compared to the dry case, the condensation of liquid water in the moist case supports slightly higher cooling rates before leading to turbulence collapse. In the very stable moist cases, runaway cooling leads to substantial condensation of liquid water close to the ground and fog (visibility less than 1 km) results over much of the domain. In the weakly stable cases, turbulent mixing narrowly yields visibilities of 1 km close to the ground over a similar time period. Despite the idealised nature of the system, the present results suggest that turbulence impedes, although will not necessarily inhibit, fog formation.

Teixeira, Joao↗

Spatial Direct Numerical Simulation of Boundary-Layer Transition Mechanisms: Validation of PSE Theory

A study of instabilities in incompressible boundary-layer flow on a flat plate is conducted by spatial direct numerical simulation (DNS) of the Navier-Stokes equations. Here, the DNS results are used to critically evaluate the results obtained using parabolized stability equations (PSE) theory and to study mechanisms associated with breakdown from laminar to turbulent flow. Three test cases are considered: two-dimensional Tollmien-Schlichting wave propagation, subharmonic instability breakdown, and oblique-wave break-down. The instability modes predicted by PSE theory are in good quantitative agreement with the DNS results, except a small discrepancy is evident in the mean-flow distortion component of the 2-D test problem. This discrepancy is attributed to far-field boundary- condition differences. Both DNS and PSE theory results show several modal discrepancies when compared with the experiments of subharmonic breakdown. Computations that allow for a small adverse pressure gradient in the basic flow and a variation of the disturbance frequency result in better agreement with the experiments.

Joslin, R. D.↗

Direct numerical simulations in solid mechanics for quantifying the macroscale effects of microstructure and material model-form error

Two fundamental approximations in macroscale solid-mechanics modeling are (1) the assumption of scale separation in homogenization theory and (2) the use of a macroscopic plasticity material model that represents, in a mean sense, the multitude of inelastic processes occurring at the microscale. With the goal of quantifying the errors induced by these approximations on engineering quantities of interest, we perform a set of direct numerical simulations (DNS) in which polycrystalline microstructures are embedded throughout a macroscale structure. The largest simulations model over 50,000 grains. The microstructure is idealized using a randomly close-packed Voronoi tessellation in which each polyhedral Voronoi cell represents a grain. An face centered cubic crystal-plasticity model is used to model the mechanical response of each grain. The overall grain structure is equiaxed, and each grain is randomly oriented with no overall texture. The detailed results from the DNS simulations are compared to results obtained from conventional macroscale simulations that use homogeneous isotropic plasticity models. The macroscale plasticity models are calibrated using a representative volume element of the idealized microstructure. Furthermore, we envision that DNS modeling will be used to gain new insights into the mechanics of material deformation and failure.

36 MATERIALS SCIENCE↗

Direct Numerical Simulation of Pore-Scale Flow in a Bead Pack: Comparison with Magnetic Resonance Imaging Observations

A significant body of current research is aimed at developing methods for numerical simulation of flow and transport in porous media that explicitly resolve complex pore and solid geometries, and at utilizing such models to study the relationships between fundamental pore-scale processes and macroscopic manifestations at larger (i.e., Darcy) scales. A number of different numerical methods for pore-scale simulation have been developed, and have been extensively tested and validated for simplified geometries. However, validation of pore-scale simulations of fluid velocity for complex, three-dimensional (3D) pore geometries that are representative of natural porous media is challenging due to our limited ability to measure pore-scale velocity in such systems. Recent advances in magnetic resonance imaging (MRI) offer the opportunity to measure not only the pore geometry, but also local fluid velocities under steady-state flow conditions in 3D and with high spatial resolution. In this paper, we present a 3D velocity field measured at sub-pore resolution (tens of micrometers) over a centimeter-scale 3D domain using MRI methods. We have utilized the measured pore geometry to perform 3D simulations of Navier-Stokes flow over the same domain using direct numerical simulation techniques. We present a comparison of the numerical simulation results with the measured velocity field. It is shown that the numerical results match the observed velocity patterns well overall except for a variance and small systematic scaling which can be attributed to the known experimental error in the MRI measurements. The comparisons presented here provide strong validation of the pore-scale simulation methods and new insights for interpretation of uncertainty in MRI measurements of pore-scale velocity. This study also provides a potential benchmark for future comparison of other pore-scale simulation methods.

computational fluid dynamics↗

A priori examination of reduced chemistry models derived from canonical stirred reactors using three-dimensional direct numerical simulation datasets

Data-driven approaches to construct reduced chemical kinetic models, that rely heavily on thermo-chemical datasets with full chemical kinetics, have been gaining popularity. Datasets from direct numerical simulations (DNS) under three-dimensional (3-D) realistic turbulent flow conditions are desirable but limited to carefully designed parametric conditions due to the computational cost. Constructing datasets from a large ensemble of zero-dimensional stirred reactors like perfectly stirred reactor (PSR) and partially stirred reactor (PaSR) is a computationally efficient solution to consider the turbulence-chemistry interactions and cover a broad range of parametric conditions. In this paper, we derive reduced chemistry models from solutions of a large number of PSR and PaSR reactors using autoencoder (AE) neural networks and principal component analysis (PCA), and conduct a priori examination of the reduced models in three temporally evolving 3-D DNS jet flames featuring local extinction and re-ignition. The results show that the reduced models derived from PaSR datasets, i.e., AE-PaSR and PCA-PaSR, generally show significant improvement over the ones derived from PSR datasets. Among all the reduced models, AE-PaSR shows the best agreement with DNS results on the reconstruction accuracy and the representation of temporally evolving local extinction and re-ignition events.

Zhang, Pei↗

Applications of direct numerical simulation of turbulence in second order closures

This paper discusses two methods of developing models for the rapid pressure-strain correlation term in the Reynolds stress transport equation using direct numerical simulation (DNS) data. One is a perturbation about isotropic turbulence, the other is a perturbation about two-component turbulence -- an extremely anisotropic turbulence. A model based on the latter method is proposed and is found to be very promising when compared with DNS data and other models.

Shih, Tsan-Hsing↗