SEARCH · Search NASA

Results for “Direct numerical simulation (DNS)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Lagrangian investigation of pseudo-turbulence in multiphase flow using superposable wakes

This study proposes a method for approximating the fully resolved flow through a monodisperse array of spherical particles using only the locations of the particles and the volume-averaged Reynolds number, both of which are available in Euler-Lagrange (EL) simulations. To achieve this, we first determine a superposable wake (SW) which best captures the behavior of direct numerical simulations (DNS). By adding the SW for all the particles, the pseudo-turbulence caused by the perturbed flow around a distribution of particles in an EL simulation can be approximated. Finally, a Reynolds stress model is then developed for use in an Euler-Lagrange framework. The range of Reynolds numbers and particle volume fractions considered in this study are 0.3 ≤ Re ≤ 173 and 0.11 ≤ Φ ≤ 0.45 accordingly.

42 ENGINEERING↗

DOE OSTI2022

Non-Boussinesq subgrid-scale model with dynamic tensorial coefficients

A major drawback of Boussinesq-type subgrid-scale stress models used in large-eddy simulations is the inherent assumption of alignment between large-scale strain rates and filtered subgrid-stresses. A priori analyses using direct numerical simulation (DNS) data have shown that this assumption is invalid locally as subgrid-scale stresses are poorly correlated with the large-scale strain rates [J. Bardina, J. Ferziger, and W. Reynolds, Improved subgrid-scale models for large-eddy simulation, in Proceedings of the 13th Fluid and Plasmadynamics Conference, AIAA (1980); C. Meneveau and K. Katz, Scale-invariance and turbulence models for large-eddy simulation, Ann. Rev. Fluid Mech. 32, 1 (2000)]. In the present work, a new, non-Boussinesq subgrid-scale model is presented where the model coefficients are computed dynamically. Some previous non-Boussinesq models have observed issues in providing adequate dissipation of turbulent kinetic energy [e.g., Bardina et al., Proceedings of the 13th Fluid and Plasmadynamics Conference (1980); R. A. Clark, J. Ferziger, and W.C. Reynolds. Evaluation of subgrid-scale models using an accurately simulated turbulent flow, J. Fluid Mech. 91, 1 (1979); S. Stolz and N. A. Adams, An approximate deconvolution procedure for large-eddy simulation, Phys. Fluids 11, 1699 (1999)]; however, the present model is shown to provide sufficient dissipation using dynamic coefficients. Modeled subgrid-scale Reynolds stresses satisfy the consistency requirements of the governing equations for large-eddy simulation (LES), vanish in laminar flow and at solid boundaries, and have the correct asymptotic behavior in the near-wall region of a turbulent boundary layer. The new model, referred to as the dynamic tensor-coefficient Smagorinsky model (DTCSM), has been tested in simulations of canonical flows: decaying and forced homogeneous isotropic turbulence, and wall-modeled turbulent channel flow at high Reynolds numbers. The results show favorable agreement with DNS data. It has been shown that DTCSM offers similar predictive capabilities as the dynamic Smagorinsky model for canonical flows. In order to assess the performance of DTCSM in more complex flows, wall-modeled simulations of high Reynolds number flow over a Gaussian bump (Boeing speed bump) exhibiting smooth-body flow separation are performed. Predictions of surface pressure and skin friction, compared against DNS and experimental data, show improved accuracy from DTCSM in comparison to existing static coefficient (Vreman) and dynamic Smagorinsky model. The computational cost of performing LES with this model is up to 15% higher than the dynamic Smagorinsky model.

42 ENGINEERING↗

DOE OSTI2023

Molecular-gas-dynamics simulations of turbulent Couette flow over a mean-free-path-scale permeable substrate

Here we report flow statistics and visualizations from molecular-gas-dynamics simulations using the direct simulation Monte Carlo (DSMC) method for turbulent Couette flow in a minimal domain where the lower wall is replaced by an idealized permeable fibrous substrate representative of thermal-protection-system materials for which the Knudsen number is O(10 -1 ). Comparisons are made with smooth-wall DSMC simulations and smooth-wall direct numerical simulations (DNS) of the Navier-Stokes equations for the same conditions. Roughness, permeability, and noncontinuum effects are assessed. In the range of Reynolds numbers considered herein, the scalings of the skin friction on the permeable substrate and of the mean flow within the substrate suggest that they are dominated by viscous effects. While the regenerative cycle characteristic of smooth-wall turbulence remains intact for all cases considered, we observe that the near-wall velocity fluctuations are modulated by the permeable substrate with a wavelength equal to the pore spacing. Additionally, the flow within the substrate shows significant rarefaction effects, resulting in an apparent permeability that is 13% larger than the intrinsic permeability. In contrast, the smooth-wall DSMC and DNS simulations exhibit remarkably good agreement for the statistics examined, despite the Knudsen number based on the viscous length scale being as large as O(10 -1 ). This latter result is at variance with classical estimates for the breakdown of the continuum assumption and calls for further investigations into the interaction of noncontinuum effects and turbulence.

42 ENGINEERING↗

DOE OSTI2025

Techniques for improved statistical convergence in quantification of eddy diffusivity moments

While recent approaches, such as the macroscopic forcing method (MFM) or Green's function-based approaches, can be used to compute Reynolds-averaged Navier-Stokes closure operators using forced direct numerical simulations, MFM can also be used to directly compute moments of the effective nonlocal and anisotropic eddy diffusivities. The low-order spatial and temporal moments contain limited information about the eddy diffusivity but are often sufficient for quantification and modeling of nonlocal and anisotropic effects. However, when using MFM to compute eddy diffusivity moments, the statistical convergence can be slow for higher-order moments. In this work, we demonstrate that using the same direct numerical simulation (DNS) for all forced MFM simulations improves statistical convergence of the eddy diffusivity moments. We present its implementation in conjunction with a decomposition method that handles the MFM forcing semianalytically and allows for consistent boundary condition treatment, which we develop for both scalar and momentum transport. We demonstrate that for a two-dimensional Rayleigh-Taylor instability case study, using the same DNS for all forced MFM simulations results in convergence with 𝒪⁡(100) simulations rather than 𝒪⁡(1000) simulations. In conclusion, we then demonstrate the impacts of improved convergence on the quantification of the eddy diffusivity.

general physics↗

DOE OSTI2024

Effects of temperature inversion on densification in chemical vapor infiltration

In a classical chemical vapor infiltration (CVI) process, the competing effects of chemical kinetics and reagent gas transport lead to non–uniform depositions such that outer layers of a preform densify faster leaving the core highly porous. Currently, CVI must be performed at a sufficiently low temperature to achieve good densification quality which leads to high processing time and cost. Volumetric heating of the preform, especially through microwaves, can create temperature inversion such that the core is hotter than the outer surface and potentially, overcome the challenges associated with isothermal CVI. Direct numerical simulations (DNS) of densification under various such temperature distributions indicate that microwave heating in CVI processing can lead to better (uniform) densification of porous preforms. Here the role of key parameters describing the temperature distributions on the densification behavior is investigated. Strategic temporal control of the temperature distribution shows that processing times can be reduced by almost half while maintaining a good densification quality similar to that of low–temperature isothermal processing. Inside–out densification due to the inverted temperature profile is a key distinguishing characteristic of microwave assisted CVI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Application of Scalar Filtered Density Function to Turbulent Flows Under Supercritical Condition

Abstract The scalar filtered density function (FDF) methodology is extended and employed for large eddy simulation (LES) of turbulent flows under supercritical condition. To describe real fluid behavior, the extended methodology incorporates the generalized heat and mass diffusion models along with real fluid thermodynamic relations which are derived using the cubic Peng–Robinson equation of state. These models are implemented within the stochastic differential equations comprising the scalar FDF transport. Simulations are conducted of a temporally developing mixing layer under supercritical condition and the results are assessed by comparing with data generated by direct numerical simulation (DNS) of the same layer. The consistency of the proposed FDF methodology is assessed. The LES-FDF predictions are shown to agree favorably with the DNS data and exhibit several key features pertaining to supercritical turbulent flows.

Energy & Fuels↗

DOE OSTI2022

Modeling of Cube Array Roughness: RANS, Large Eddy Simulation, and Direct Numerical Simulation

Abstract Flow over arrays of cubes is an extensively studied model problem for rough wall turbulent boundary layers. While considerable research has been performed in computationally investigating these topologies using direct numerical simulation (DNS) and large eddy simulation (LES), the ability of sublayer-resolved Reynolds-averaged Navier–Stokes (RANS) to predict the bulk flow phenomena of these systems is relatively unexplored, especially at low and high packing densities. Here, RANS simulations are conducted on six different packing densities of cubes in aligned and staggered configurations. The packing densities investigated span from what would classically be defined as isolated, up to those in the d-type roughness regime, filling in the gap in the present literature. Three different sublayer-resolved turbulence closure models were tested for each case: a low Reynolds number k–ϵ model, the Menter k–ω SST model, and a full Reynolds stress model. Comparisons of the velocity fields, secondary flow features, and drag coefficients are made between the RANS results and existing LES and DNS results. There is a significant degree of variability in the performance of the various RANS models across all comparison metrics. However, the Reynolds stress model demonstrated the best accuracy in terms of the mean velocity profile as well as drag partition across the range of packing densities.

Engineering↗

DOE OSTI2023

Large Eddy Simulation of Convective Heat Transfer in a Random Pebble Bed Using the Spectral Element Method

The development of fluoride-cooled high-temperature reactors has drastically increased the demand for an in-depth understanding of the heat transfer (HT) in packed beds cooled by liquid salts. The complex flow fields and space-dependent porosity found in a pebble bed require a detailed understanding to ensure the proper cooling of the reactor core during normal and accident conditions. As detailed experimental data are complicated to obtain for these configurations, high-fidelity simulation such as large eddy simulation and direct numerical simulation (DNS) can be employed to create a high-resolution heat transfer numerical database that can assist in addressing industrial-driven issues associated with the heat transfer behavior of fluoride-cooled high-temperature reactors. In this paper, we performed a series of large eddy simulation using computational fluid dynamics (CFD) code NekRS to investigate the heat transfer for a bed of 1741 pebbles. Further, the characteristics of the flow, such as average, rms, and time series of velocity and temperature, have been analyzed. Porous media averages have also been performed. The simulation results show a good agreement between non-conjugate heat transfer and conjugate heat transfer. The generated data will be used to benchmark heat transfer modeling methods and local maxima/minima of heat transfer parameters. It will also be used for supporting convective heat transfer quantification for Kairos Power and benchmarking lower fidelity models.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Direct Numerical Simulation of Transitional and Turbulent Flows Over Multi-Scale Surface Roughness—Part I: Methodology and Challenges

Abstract High-fidelity simulation of transitional and turbulent flows over multi-scale surface roughness presents several challenges. For instance, the complex and irregular geometrical nature of surface roughness makes it impractical to employ conforming structured grids, commonly adopted in large-scale numerical simulations due to their high computational efficiency. One possible solution to overcome this problem is offered by immersed boundary methods, which allow wall boundary conditions to be enforced on grids that do not conform to the geometry of the solid boundary. To this end, a three-dimensional, second-order accurate boundary data immersion method (BDIM) is adopted. A novel mapping algorithm that can be applied to general three-dimensional surfaces is presented, together with a newly developed data-capturing methodology to extract and analyze on-surface flow quantities of interest. A rigorous procedure to compute gradient quantities such as the wall shear stress and the heat flux on complex non-conforming geometries is also introduced. The new framework is validated by performing a direct numerical simulation (DNS) of fully developed turbulent channel flow over sinusoidal egg-carton roughness in a minimal-span domain. For this canonical case, the averaged streamwise velocity profiles are compared against results from the literature obtained with a body-fitted grid. General guidelines on the BDIM resolution requirements for multi-scale roughness simulation are given. Momentum and energy balance methods are used to validate the calculation of the overall skin friction and heat transfer at the wall. The BDIM is then employed to investigate the effect of irregular homogeneous surface roughness on the performance of an LS-89 high-pressure turbine blade at engine-relevant conditions using DNS. This is the first application of the BDIM to realize multi-scale roughness for transitional flow in transonic conditions in the context of high-pressure turbines. The methodology adopted to generate the desired roughness distribution and to apply it to the reference blade geometry is introduced. The results are compared to the case of an equivalent smooth blade.

Engineering↗

DOE OSTI2024

Direct Numerical Simulation of Involute Channel Turbulence

A direct numerical simulation (DNS) study was performed on turbulent flow in the high flux isotope reactor involute channel geometry to develop a numerical database and determine the differences compared with a flat parallel channel. The varying channel curvature along the walls was studied for differences in mean profiles. Parameters of interest include streamwise velocity, turbulent kinetic energy (TKE), and turbulence dissipation rate, as well as Reynolds stresses and turbulence transport terms. Profile sampling was carried out at 10 locations along the span of the involute. Additional DNS studies were performed on smaller domains of comparable curvature to the involute domain: a high curvature channel (high circular), a low curvature channel (low circular), and a flat channel (flat). Here, each of these four cases was compared against each other and to other DNS studies performed on parallel flows. The results indicate that the bulk involute channel flow does not differ significantly from a flat parallel channel flow and that the curvature of the walls does not significantly alter the mean flow parameters. However, the regions of the involute channel near the side walls exhibit relatively low magnitude twin recirculation structures driven toward the side walls from the centerline of the channel, which warrants further study.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2024

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. Here, this study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in OpenFOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

42 ENGINEERING↗

DOE OSTI2024

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. This study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in Open-FOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS simulation includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

Ge, Wenjun↗

DOE OSTI2022

Isogeometric large-eddy simulations of turbulent particle-laden flows

In recent years, isogeometric analysis (IGA) has attracted significant attention from the computational mechanics community due to its ability to integrate design and analysis. Besides, IGA is also a higher-order discretization technique for solving partial differential equations, showing high approximation capability per degree of freedom. In this paper, we extend the application realm of IGA to particle-laden flows based on Eulerian–Eulerian description that couples Navier–Stokes equations with a density transport equation through a Boussinesq approximation. The coupled systems are solved by using quadratic non-uniform rational B-spline (NURBS) functions and a recently developed residual-based variational multiscale (VMS) formulation, which introduces coupling between the fine velocity scales and density equation residuals. We deploy the proposed approach to perform large-eddy simulations (LES) of dilute particle-laden flows over a flat surface at Reynolds number = 10,000. We compare the simulation results against direct numerical simulation (DNS) results from the literature. We find that combining VMS and IGA, the proposed approach enables accurate prediction of a wide range of flow/particle statistics with a relatively lower mesh resolution.

Mathematics↗

DOE OSTI2025

Intelligent Sampling of Extreme-Scale Turbulence Datasets for Accurate and Efficient Spatiotemporal Model Training

With the end of Moore’s law and Dennard scaling, efficient training increasingly requires rethinking data volume. Can we train better models with significantly less data via intelligent subsampling? To explore this, we develop SICKLE, a sparse intelligent curation framework for efficient learning, featuring a novel maximum entropy (MaxEnt) sampling approach, scalable training, and energy benchmarking. We compare MaxEnt with random and phase-space sampling on large direct numerical simulation (DNS) datasets of turbulence. Evaluating SICKLE at scale on Frontier, we show that subsampling as a preprocessing step can, in many cases, improve model accuracy and substantially lower energy consumption, with observed reductions of up to 38×.

Brewer, Wes [ORNL] (ORCID:0000000236393956)↗

DOE OSTI2022

PeleLMeX [SWR-22-48]

PeleLMeX is a solver for high fidelity reactive flow simulations, namely direct numerical simulation (DNS) and large eddy simulation (LES). The solver combines a low Mach number approach, adaptive mesh refinement (AMR), embedded boundary (EB) geometry treatment and high performance computing (HPC) to provide a flexible tool to address research questions on platforms ranging from small workstations to the world's largest GPU-accelerated supercomputers. PeleLMeX has been used to study complex flame/turbulence interactions in RCCI engines and hydrogen combustion or the effect of sustainable aviation fuel on gas turbine combustion. PeleLMeX is part of the Pele combustion Suite (https://amrex-combustion.github.io/)

Day, Marcus↗

DOE OSTI2024

Tardigrade-examples V0.1.0

Tardigrade-examples is a repository of computational workflows that exercise the Tardigrade software package. The Tardigrade software package is an implementation of Eringen’s micromorphic continuum theory with capabilities to support multiscale material modeling. These capabilities include homogenization through the Micromorphic Filter, calibration of micromorphic material models, and macroscale simulation in Tardigrade-MOOSE. This repository investigates continuum upscaling of various direct numerical simulations (DNS) conducted in Abaqus finite element (FE), Ratel FE, and GEOS material point method (MPM) software. Verification of the upscaling workflow is first investigated by considering DNS of trivial stress states for homogeneous materials, results of which indicate that classical continuum behavior is recovered as expected. DNS of heterogeneous materials are then considered.

Allard, Thomas↗

DOE OSTI2026

Code for the manuscript "Lagrangian Attention Tensor Networks for Velocity Gradient Statistical Mode

We disclose a python/pytorch implementation of the physics-informed machine learning algorithm described in "Lagrangian Attention Tensor Networks for Velocity Gradient Statistical Modeling", LA-UR-24-30678. Direct numerical simulation (DNS) of ubiquitous turbulence phenomena is computationally infeasible for realistic flows. As a result, reduced modeling for turbulent flows aim to reduce the number of resolved scales while retaining accurate representations of the small-scale physics. The dynamics of the velocity gradient tensor (VGT) is a key ingredient in reduced or subgrid turbulence models. The evolution equation for the VGT involves nonlocal terms, requiring closure modeling. This implementation of the novel methodology of Lagrangian Attention Tensor Networks (LATN), utilizes a structured representation of the history of the VGT to inform a physics-informed machine learning algorithm. This addition of structured memory terms is shown to outperform previous models when trained and evaluated on DNS data.

Livescu, Daniel [LANL]↗

DOE OSTI2021

A Lagrangian Study of Interfaces at the Edges of Cumulus Clouds

Abstract Interfaces at the edge of an idealized, nonprecipitating, warm cloud are studied using direct numerical simulation (DNS) complemented with a Lagrangian particle tracking routine. Once a shell has formed, four zones can be distinguished: the cloud core, visible shell, invisible shell, and the environment. The union of the visible and invisible regions is the shell commonly referred to in literature. The boundary between the invisible shell and the environment is the turbulent–nonturbulent interface (TNTI), which is typically not considered in cloud studies. Three million particles were seeded homogeneously across the domain and properties were recorded along individual trajectories. The results demonstrate that the traditional cloud boundary (separating cloudy and noncloudy regions using thresholds applied on liquid condensate or updraft velocity) are some distance away from the TNTI. Furthermore, there is no dynamic difference between the traditional liquid-condensate boundary and the region extending to the TNTI. However, particles crossing the TNTI exhibit a sharp jump in enstrophy and a smooth increase in buoyancy. The traditional cloud boundary coincides with the location of minimum buoyancy in the shell. The shell premixes the entraining and detraining air and analysis reveals a highly skewed picture of entrainment and detrainment at the traditional cloud boundary. A preferential entrainment of particles with velocity and specific humidity higher than the mean values in the shell is observed. Large-eddy simulation of a more realistic setup detects an interface with similar properties using the same thresholds as in the DNS, indicating that the DNS results extrapolate beyond their idealized conditions.

54 ENVIRONMENTAL SCIENCES↗