Search NASA⌕ Search

SEARCH · Search NASA

Results for “Display type.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Lidar determination of the composition of atmosphere aerosols

Theoretical and experimental studies of the feasibility of using DIfferential SCatter (DISC) lidar to measure the composition of atmospheric aerosols are described. This technique involves multiwavelength measurements of the backscatter cross section of aerosols in the middle infrared, where a number of materials display strong restrahlen features that significantly modulate the backscatter spectrum. The theoretical work indicates that a number of materials of interest, including sulfuric acid, ammonium sulfate, and silicates, can be discriminated among with a CO2 lidar. An initial evaluation of this procedure was performed in which cirrus clouds and lower altitude tropospheric aerosols were developed. The observed ratio spectrum of the two types of aerosol displays structure that is in crude accord with theoretical expectations.

Wright, M. L.↗

Characterization of Hayabusa II Target Asteroid (162173) 1999 JU3

The Japanese Hayabusa II mission is planned to rendezvous with and return a sample from the near-Earth asteroid (162173) 1999 JU3. Previous mid-infrared studies have constrained the albedo and thermal properties of this object (Muller et al. 2011; Campins et al. 2011; Hasegawa et al. 2008). Visible wavelength spectra from 1999 and 2007 reveal a C-type asteroid that displays pronounced spectroscopic variability around 0.7 microns. Variability in the strength of a 0.7 micron band could be due to heterogeneous concentrations of iron-bearing phyllosilicates across its surface (Vilas 2008). We will present new observations from the favorable 2012 apparition to further characterize this object. In June of 2012 spectroscopic observations were conducted with the LDSS3 and FIRE instruments on the Magellan telescopes at Las Campanas Observatory in Chile. Between April and July of 2012 broadband visible-wavelength photometry was obtained with the Tenagra II telescope in Arizona and with the IMACS, Megacam and LDSS3 instruments on the Magellan telescopes. Our visible and near-infrared spectra confirm a C-type taxonomic classification, but do not show evidence for the presence of a 0.7 micron phyllosilicate band. Our time series of visible spectra cover approximately 60% of the rotational phases of 1999 JU3, but do not display any pronounced variability. We use our new optical light curves, combined with photometry from 2007, to refine a shape model of the asteroid. This shape model provides a means for mapping surface regions accessed by the spectroscopic observations from both 2007 and 2012, and thus to directly address the possibility of surface heterogeneity. This surface map, in conjunction with the newly measured photometric phase curve of the asteroid, will be used to make predictions regarding composition and surface properties that will ultimately be tested upon arrival of the Hayabusa II spacecraft.

Moskovitz, Abe↗

Experiences in teleoperation of land vehicles

Teleoperation of land vehicles allows the removal of the operator from the vehicle to a remote location. This can greatly increase operator safety and comfort in applications such as security patrol or military combat. The cost includes system complexity and reduced system performance. All feedback on vehicle performance and on environmental conditions must pass through sensors, a communications channel, and displays. In particular, this requires vision to be transmitted by close-circuit television with a consequent degradation of information content. Vehicular teleoperation, as a result, places severe demands on the operator. Teleoperated land vehicles have been built and tested by many organizations, including Sandia National Laboratories (SNL). The SNL fleet presently includes eight vehicles of varying capability. These vehicles have been operated using different types of controls, displays, and visual systems. Experimentation studying the effects of vision system characteristics on off-road, remote driving was performed for conditions of fixed camera versus steering-coupled camera and of color versus black and white video display. Additionally, much experience was gained through system demonstrations and hardware development trials. The preliminary experimental findings and the results of the accumulated operational experience are discussed.

Mcgovern, Douglas E.↗

Three-dimensional analysis of vestibular efferent neurons innervating semicircular canals of the gerbil

Anterograde labeling techniques were used to examine peripheral innervation patterns of vestibular efferent neurons in the crista ampullares of the gerbil. Vestibular efferent neurons were labeled by extracellular injections of biocytin or biotinylated dextran amine into the contralateral or ipsilateral dorsal subgroup of efferent cell bodies (group e) located dorsolateral to the facial nerve genu. Anterogradely labeled efferent terminal field varicosities consist mainly of boutons en passant with fewer of the terminal type. The bouton swellings are located predominately in apposition to the basolateral borders of the afferent calyces and type II hair cells, but several boutons were identified close to the hair cell apical border on both types. Three-dimensional reconstruction and morphological analysis of the terminal fields from these cells located in the sensory neuroepithelium of the anterior, horizontal, and posterior cristae were performed. We show that efferent neurons densely innervate each end organ in widespread terminal fields. Subepithelial bifurcations of parent axons were minimal, with extensive collateralization occurring after the axons penetrated the basement membrane of the neuroepithelium. Axonal branching ranged between the 6th and 27th orders and terminal field collecting area far exceeds that of the peripheral terminals of primary afferent neurons. The terminal fields of the efferent neurons display three morphologically heterogeneous types: central, peripheral, and planum. All cell types possess terminal fields displaying a high degree of anisotropy with orientations typically parallel to or within +/-45 degrees of the longitudinal axis if the crista. Terminal fields of the central and planum zones predominately project medially toward the transverse axis from the more laterally located penetration of the basement membrane by the parent axon. Peripheral zone terminal fields extend predominately toward the planum semilunatum. The innervation areas of efferent terminal fields display a trend from smallest to largest for the central, peripheral, and planum types, respectively. Neurons that innervate the central zone of the crista do not extend into the peripheral or planum regions. Conversely, those neurons with terminal fields in the peripheral or planum regions do not innervate the central zone of the sensory neuroepithelium. The central zone of the crista is innervated preferentially by efferent neurons with cell bodies located in the ipsilateral group e. The peripheral and planum zones of the crista are innervated preferentially by efferent neurons with cell bodies located in the contralateral group e. A model incorporating our anatomic observations is presented describing an ipsilateral closed-loop feedback between ipsilateral efferent neurons and the periphery and an open-loop feed-forward innervation from contralateral efferent neurons. A possible role for the vestibular efferent neurons in the modulation of semicircular canal afferent response dynamics is proposed.

Non-NASA Center↗

Revolutionizing Porous Liquids: Stabilization and Structural Engineering Achieved by a Surface Deposition Strategy

Facile approaches capable of constructing stable and structurally diverse porous liquids (PLs) that can deliver high-performance applications are a long-standing, captivating, and challenging research area that requires significant attention. Here, in this work, a facile surface deposition strategy is demonstrated to afford diverse type III-PLs possessing ultra-stable dispersion, external structure modification, and enhanced performance in gas storage and transformation by leveraging the expeditious and uniform precipitation of selected metal salts. The Ag(I) species-modified zeolite nanosheets are deployed as the porous host to construct type III-PLs with ionic liquids (ILs) containing bromide anion , leading to stable dispersion driven by the formation of AgBr nanoparticles. The as-afforded type-III PLs display promising performance in CO 2 capture/conversion and ethylene/ethane separation. Property and performance of the as-produced PLs can be tuned by the cation structure of the ILs, which can be harnessed to achieve polarity reversal of the porous host via ionic exchange. The surface deposition procedure can be further extended to produce PLs from Ba(II)-functionalized zeolite and ILs containing [SO 4 ] 2– anion driven by the formation of BaSO 4 salts. The as-produced PLs are featured by well-maintained crystallinity of the porous host, good fluidity and stability, enhanced gas uptake capacity, and attractive performance in small gas molecule utilization.

36 MATERIALS SCIENCE↗

Adsorption Studies of PVA Based Thermosensitive Polymers in Heavy Metal Removal

Thermosensitive copolymers were synthesized by grafting of N-isopropyl acrylamide (NIPAM) monomer onto crosslinked poly(vinyl alcohol) (PVA) and characterized by FTIR, XRD, elemental and SEM-EDS analysis. Also, the swelling capacities, water release values and cloud points of the copolymers were determined. The removal of Cu(II), Ni(II) and Cd(II) ions was studied by using of the copolymers as solid phase extractor. Dodecyltrimethylammonium chloride (DTAC) was the extractant to complex with ions in the process. The copolymer adsorbs the metal–extractant complexes above its lower critical solution temperature (LCST) by hydrophobic interaction. Increasing the time and initial metal ion concentration caused an increase in the adsorption capacities, and the copolymer displayed S-type adsorption in Giles’s classification. The experimental data followed pseudo-second-order model, and the dominated adsorption mechanism was external mass diffusion. In addition, adsorption/desorption cycles presented the usability of the synthesized copolymer as sorbent for environmentally friendly processes.

36 MATERIALS SCIENCE↗

Mice carrying a complete deletion of the talin2 coding sequence are viable and fertile

Highlights: Black-Right-Pointing-Pointer Mice lacking talin2 are viable and fertile with only a mildly dystrophic phenotype. Black-Right-Pointing-Pointer Talin2 null fibroblasts show no major defects in proliferation, adhesion or migration. Black-Right-Pointing-Pointer Maintaining a colony of talin2 null mice is difficult indicating an underlying defect. -- Abstract: Mice homozygous for several Tln2 gene targeted alleles are viable and fertile. Here we show that although the expression of talin2 protein is drastically reduced in muscle from these mice, other tissues continue to express talin2 albeit at reduced levels. We therefore generated a Tln2 allele lacking the entire coding sequence (Tln2{sup cd}). Tln2{sup cd/cd} mice were viable and fertile, and the genotypes of Tln2{sup cd/+} intercrosses were at the expected Mendelian ratio. Tln2{sup cd/cd} mice showed no major difference in body mass or the weight of the major organs compared to wild-type, although they displayed a mildly dystrophic phenotype. Moreover, Tln2{sup cd/cd} mouse embryo fibroblasts showed no obvious defects in cell adhesion, migration or proliferation. However, the number of Tln2{sup cd/cd} pups surviving to adulthood was variable suggesting that such mice have an underlying defect.

60 APPLIED LIFE SCIENCES↗

Mechanism of c-Met and EGFR tyrosine kinase inhibitor resistance through epithelial mesenchymal transition in non-small cell lung cancer

According to currently available estimates from Cancer Research UK, 14.1 million new lung cancer cases were diagnosed and a staggering 8.2 million people worldwide died from lung cancer in 2012. EGFR and c-Met are two tyrosine kinase receptors most commonly overexpressed or mutated in Non-small Cell Lung Cancer (NSCLC) resulting in increased proliferation and survival of lung cancer cells. Tyrosine kinase inhibitors (TKIs), such as erlotinib, approved by the FDA as first/second line therapy for NSCLC patients have limited clinical efficacy due to acquired resistance. In this manuscript, we investigate and discuss the role of epithelial mesenchymal transition (EMT) in the development of resistance against EGFR and c-Met TKIs in NSCLC. Our findings show that Zeb-1, a transcriptional repressor of E-Cadherin, is upregulated in TKI-resistant cells causing EMT. We observed that TKI-resistant cells have increased gene and protein expression of EMT related proteins such as Vimentin, N-Cadherin, β-Catenin and Zeb-1, while expression of E-Cadherin, an important cell adhesion molecule, was suppressed. We also confirmed that TKI-resistant cells display mesenchymal cell type morphology, and have upregulation of β-Catenin which may regulate expression of Zeb-1, a transcriptional repressor of E-Cadherin in TKI-resistant NSCLC cells. Finally, we show that down-regulating Zeb-1 by inducing miR-200a or β-Catenin siRNA can increase drug sensitivity of TKI-resistant cells. - Highlights: • Resistance to TKIs in NSCLC cells is mediated via modulation in EMT related proteins. • EMT may induce c-Met mediated TKI resistance, similar to EGFR TKI resistance. • Role of β-catenin and cadherins in TKI resistance was validated by FACS and qPCR. • Knockdown of β-catenin or Zeb-1 can increase TKI sensitivity in TKI-resistant cells. • Targeting key EMT related proteins may overcome TKI resistance in NSCLC.

60 APPLIED LIFE SCIENCES↗

Effects of Pd substitution on the thermoelectric and electronic properties of delafossite Cu{sub 1−x}Pd{sub x}FeO{sub 2} (x=0.01, 0.03 and 0.05)

Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} (x=0.01, 0.03 and 005) delafossite was prepared by solid state reactions and was calcined/sintered at 1050 °C. The effect of Pd{sup 2+} substitution for the Cu{sup 1+} sites on the thermoelectric and electronic properties of Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} were investigated. The crystal structure, oxygen decomposition, thermoelectric and electronic properties were characterized by X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy (XPS), Seebeck coefficient, electrical conductivity and thermal conductivity measurements. The characterization showed that Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} formed a hexagonal delafossite structure with R3−m symmetry. The existence of Pd{sup 2+}, Cu{sup 1+}, Cu{sup 2+}, Fe{sup 3+}, Fe{sup 4+} and O was revealed from the XPS results. Confirmation of Pd{sup 2+} substitution for the Cu{sup 1+} sites occurred by increasing the c-axis in the lattice parameter with a Pd content. The O content intercalated at the center of the triangular Cu acted as a support to produce Cu{sup 2+} ions and was reduced with an increasing Pd content. The mixed valencies of Cu{sup 1+}/Cu{sup 2+} and Cu{sup 1+}/Pd{sup 2+} in the Cu layer changed the electrical conductivity and the Fe{sup 3+}/Fe{sup 4+} mixed valencies in the FeO{sub 6} layer caused the Seebeck coefficient to increase. Both the electrical conductivity and Seebeck coefficient for Pd contents of x=0.01 and 0.03 were higher than that of non-doped CuFeO{sub 2}. The low thermal conductivity of Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} resulted from the substitution of Pd, which has a large atomic mass, into structure. The Jonker plot indicated that the electronic properties displayed a degenerate density of states and that Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} was a semiconductor. A high ZT value of 0.055 was obtained for a Pd content of 0.03 at 950 K. The Pd{sup 2+} substitution for the Cu{sup 1+} sites influenced the thermoelectric and electronic properties of the delafossite Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} samples. - Graphical abstract: Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} (x=0.01, 0.03 and 005) delafossite was prepared by solid state reactions. The characterization showed that Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} formed a hexagonal delafossite structure with R3−m symmetry. The existence of Pd{sup 2+}, Cu{sup 1+}, Cu{sup 2+}, Fe{sup 3+}, Fe{sup 4+} and O was revealed from the XPS results. The O content intercalated at the center of the triangular Cu acted as a support to produce Cu{sup 2+} ions and was reduced with an increasing Pd content. The mixed valencies of Cu{sup 1+}/Cu{sup 2+} and Cu{sup 1+}/Pd{sup 2+} in the Cu layer changed the electrical conductivity and the Fe{sup 3+}/Fe{sup 4+} mixed valencies in the FeO{sub 6} layer caused the Seebeck coefficient to increase. Both the electrical conductivity and Seebeck coefficient for Pd contents of x=0.01 and 0.03 were higher than that of non-doped CuFeO{sub 2}. The low thermal conductivity of Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} resulted from the substitution of Pd, which has a large atomic mass, into structure. A high ZT value of 0.055 was obtained for a Pd content of 0.03 at 950 K. The Pd{sup 2+} substitution for the Cu{sup 1+} sites influenced the thermoelectric and electronic properties of the delafossite Cu{sub (1−x)}Pd{sub (x)}FeO{sub 2} samples. - Highlights: • New compound of Cu{sub 1−x}Pd{sub x}FeO{sub 2} (x=0.01, 0.03 and 0.05) forms phase of delafossite. • The compound displays p-type thermoelectric materials. • The Pd-substituted for Cu{sup 1+} sites forms Pd{sup 2+}. • Mixed valencies of Cu{sup +}/Cu{sup 2+}, Cu{sup +}/Pd{sup 2+} and Fe{sup 3+}/Fe{sup 4+} appear in the compound. • Large atomic mass of Pd-substituted causes low thermal conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

([M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}]){sub ∞} (M=Zn, Mn): Three-dimensional chalcogenide frameworks constructed from quaternary metal selenide clusters with two different transition metals

Herein we report solvothermal syntheses of two new three-dimensional chalcogenide frameworks ([M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}]){sub n} (M=Zn (1), Mn (2)), which consist of quaternary metal selenide clusters with two different transition metals. The compounds represent the first Ag–Zn/Mn–Sn–Se based quaternary anionic frameworks. The optical studies show that the band gaps for 1 and 2 are 2.09 eV and 1.71 eV, respectively. Moreover, the photoelectrochemical study indicates that compound 1 displays n-type semiconducting behaviour and is photoactive under visible light illumination (λ>400 nm). - Graphical abstract: Two 3D framework selenides, [M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}] (M=Zn (1), Mn (2)), constructed from quaternary metal selenide clusters, have been solvothermally synthesized and are photoactive under visible light illumination. - Highlights: • Two new three-dimensional selenide frameworks. • Quaternary metal selenide clusters with two different transition metals. • Photoelectrochemical study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Host-guest prospects of neodymium and gadolinium ultraphosphate frameworks for nuclear waste storage: Multi-temperature topological analysis of nanoporous cages in RP{sub 5}O{sub 14}

Highlights: • The temperature-dependent cage topologies of RP{sub 5}O{sub 14} (R = Nd or Gd) were examined. • A topological analysis revealed similar cage structure for RP{sub 5}O{sub 14} (R = Nd or Gd). • One exception: the 8/4 cage topology of NdP{sub 5}O{sub 14} lacks structural cross-linking. • Volume (UO{sub 2} or PuO{sub 2}) ≫ 8/4 topology in RP{sub 5}O{sub 14} (R = Nd or Gd). • RP{sub 5}O{sub 14} (R = Nd or Gd) are good prospective host media for nuclear waste storage. - Abstract: Rare-earth ultraphosphate (RP{sub 5}O{sub 14}) framework materials are potential host media for nuclear waste storage, since cages within their nanoporous structures have volumes that match well those of prospective guests such as uranium or plutonium ions. Good volume matches of host cages and guest compounds are nonetheless not the only structural requirement for ensuring viable nuclear waste storage. Host structures also need to be stable enough to withstand the typical environmental conditions of long-term storage of spent nuclear fuel. To this end, the nanoporous cage topologies of neodymium and gadolinium ultraphosphate, NdP{sub 5}O{sub 14} and GdP{sub 5}O{sub 14}, are investigated as a function of temperature. Topological analysis shows that, while both compounds are essentially isostructural, thus displaying the same type of cage structures, the cage volumes of NdP{sub 5}O{sub 14} are significantly larger than those of GdP{sub 5}O{sub 14}, with one stark exception. This exception concerns the cage of NdP{sub 5}O{sub 14} whose 8/4 topology lacks structural cross-linking that would otherwise give it much more strength. This 'squashed' cage appears to owe its origins to the specific nature of crystallographic twinning in NdP{sub 5}O{sub 14}, which causes strain that needs alleviating; squashing the 8/4 cage in NdP{sub 5}O{sub 14} would be the most susceptible option towards this end, since its cage manifests the weakest structural construct. GdP{sub 5}O{sub 14} succumbs to a gradual contraction of its 8/4 cage only with increasing temperature above 300 K; this is well below its second-order monoclinic-to-orthorhombic phase transition at 420–430 K; which is 420 K for NdP{sub 5}O{sub 14}. Fortunately, the volumes of heavy metal ions that arise from spent nuclear fuels do not match the size requirements of cages with 8/4 topology in RP{sub 5}O{sub 14} hosts needed for encapsulation; otherwise, radiation leakage of such containment would present a risk. Both NdP{sub 5}O{sub 14} and GdP{sub 5}O{sub 14} would therefore seem to offer good prospects as host media for nuclear waste storage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nd3+ Doping effect on the optical and electrical properties of SnO2 thin films prepared by nebulizer spray pyrolysis for opto-electronic application

Highlights: • High quality, Nd:SnO{sub 2} thin films prepared using simple nebulizer spray pyrolysis technique. • Characterizations of the films confirmed good crystallinity and smooth surface morphology. • High optical transparency with low electrical resistivity in nebulizer spray pyrolysis prepared Nd: SnO{sub 2} thin films is presented. - Abstract: Neodymium doped tin oxide (Nd: SnO{sub 2}) thin films were deposited on heated glass substrates with different Nd concentrations (0, 2, 4 and 6 %) by nebulizer spray pyrolysis method. Effects of Nd doping on structural, optical and electrical properties of the prepared films were investigated. X-ray diffraction study confirmed that all the deposited Nd: SnO{sub 2} films are in polycrystalline tetragonal structure with (211) preferential orientation. FESEM images showed that the prepared SnO{sub 2} particles are in nano-size in spherical shape, completely covering the substrate. AFM topology showed smooth deposition of the films with minimum surface roughness. The films showed maximum optical transmittance 90 % in the visible region with a band gap value 3.67 eV, also showed low refractive index and extinction coefficients. Room temperature photoluminescence (PL) spectrum exhibited a strong UV emission peak at 356 nm for all the films. All the Nd: SnO{sub 2} films displayed n-type conductivity with low electrical resistivity 5.88 × 10{sup −4} (Ω cm) for 4 % Nd doping. As the films showed good figure of merit (ϕ) values, these Nd doped SnO{sub 2} thin films can perform better role in optoelectronic device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Directed Hypersonic Strain Waves Imaged with Ultrafast Electron Microscopy

Intense, ultrafast photoexcitation of semiconducting materials produces several discrete but inter-related energy relaxation processes that span large spatial and temporal scales. Initial charge-carrier excitation, and generation of a dense electron-hole plasma, produces hypersonic plasma waves that propagate outward from the excitation zone. Related to this, myriad scattering processes (electron-electron, electron-phonon, etc.) occur within the first few picoseconds following photoexcitation, ultimately leading to the launch of coherent propagating strain waves. In thin membranes of semiconducting materials, propagating strain waves display Lamb-type symmetries and hypersonic velocities (depending on mode type and membrane thickness). In addition to often-used ultrafast spectroscopic methods, femtosecond X-ray and electron scattering has been used to study both hypersonic plasma waves and acoustic-phonon wavetrains. Observations from these experiments, combined with knowledge of the associated spatiotemporal scales, lead to questions about preferred nucleation points/regions, propagation directions, and time-varying phase-velocity dispersion behaviors. In this work, we discuss the results of real-space imaging, with ultrafast electron microscopy (UEM), of hypersonic coherent strain-wave dynamics in Ge.

47 OTHER INSTRUMENTATION↗

Structural Characterization and Ligand-Induced Conformational Changes of SenB, a Se-Glycosyltransferase Involved in Selenoneine Biosynthesis

Selenium (Se) is an essential micronutrient that is found naturally in proteins, nucleic acids, and natural products. Unlike selenoproteins and selenonucleic acids, little is known about the structures of biosynthetic enzymes that incorporate Se into small molecules. Here, we report the X-ray crystal structure of SenB, the first known Se-glycosyltransferase that was recently found to be involved in the biosynthesis of the Se-containing metabolite selenoneine. SenB catalyzes C–Se bond formation using selenophosphate and an activated uridine diphosphate sugar as a Se and glycosyl donor, respectively, making it the first known selenosugar synthase and one of only four bona fide C–Se bond-forming enzymes discovered to date. Our crystal structure, determined to 2.25 Å resolution, reveals that SenB is a type B glycosyltransferase, displaying the prototypical fold with two globular Rossmann-like domains and a catalytic interdomain cleft. By employing complementary structural biology techniques, we find that SenB undergoes both local and global substrate-induced conformational changes, demonstrating a significant increase in α-helicity and a transition to a more compact conformation. Our results provide the first structure of SenB and set the stage for further biochemical characterization in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward Ideal Metal–Organic Framework Thin-Film Growth via Automated Layer-by-Layer Deposition: Examples Based on Perylene Diimide Linkers

Photoactive metal-organic framework (MOF) thin films offer an opportunity for translating the advantages of periodic, crystalline, and tailorable light-harvesting materials directly into devices such as those for photoelectrochemical solar energy conversion. In this study, we report the fabrication of light-absorbing perylene-diimide-containing pillared-paddlewheel MOF thin films using an automated layer-by-layer (LbL) deposition technique. Our focus here is on optimizing the growth of representative chromophoric MOFs as oriented films of uniform and predefined thickness. Growth was examined as a function of metal identity, pillaring ligand composition, and supporting-surface chemical functionality. Further, application of atomic force microscopy (AFM) and complementary techniques revealed that the surface-supported MOFs initially display island-type film growth (Volmer-Weber growth), resulting in comparatively rough films. Further growth is accompanied by the merging of islands, resulting in films that, depending on experimental details, can be remarkably smooth (i.e., roughness on the order of ±1 nm (one structural repeat unit in the pillaring direction)). These details include the use of 1,4-diazabicyclo[2.2.2]octane (DABCO) as a MOF pillar and ALD-grown zinc oxide as a film support (ALD = atomic layer deposition). Also helpful for mitigating island-type growth, at least in part, is the replacement of Zn 2+ by Cu 2+ as the metal component of the MOF. Notably, each of these adjustments entails replacing weaker chemical bonds with stronger ones.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling the Negative Thermal Expansion and Response to Pressure in ReO 3 -type Fluorides by the Deliberate Introduction of Excess Fluoride: Mg 1– x Zr 1+ x F 6+2 x , x = 0.15, 0.30, 0.40, and 0.50

Cubic ReO 3 -type fluorides often display negative or very low thermal expansion. However, they also typically undergo phase transitions upon cooling and/or modest compression, which are undesirable from the perspective of potential applications. Density measurements and total scattering data for Mg 1– x Zr 1+ x F 6+2 x , x = 0.15, 0.30, 0.40, and 0.50, indicate that the introduction of excess fluoride into cubic MgZrF 6 is accompanied by the population of interstitial fluoride sites and the conversion of corner to edge shared coordination polyhedra. Unlike MgZrF 6 , no phase transitions are seen upon cooling these materials to 10 K, and the first high pressure phase transition in these compositions occurs at pressures much higher than that previously reported for MgZrF 6 (0.37 GPa). The introduction of excess fluoride also provides for control of thermal expansion. Overall, for all of the compositions studied, negative thermal expansion is seen at the lowest temperature examined, and positive thermal expansion is observed at the highest temperature. The temperature at which zero thermal expansion occurs varies from ~150 K for x = 0.50 to ~500 K for x = 0.00. High pressure diffraction also indicates that increasing the amount of excess fluoride elastically stiffens the cubic ReO 3 related structure and reduces the extent of pressure induced softening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetism Studies of Bis(acyl)phosphide-Supported Eu 3+ and Eu 2+ Complexes

A series of bis(acyl)phosphide-supported Eu complexes were synthesized (bis(acyl)phosphide = BAP). Here, in this study, BAP ligands proved to be excellent ligands for the synthesis of both Eu 3+ and Eu 2+ molecular complexes. Sodium bis(mesitoyl)phosphide (Na( mes BAP)) and sodium bis(2,4,6-triisopropylbenzoyl)phosphide (Na( tripp BAP)) were employed as ligand precursors for the synthesis of the Eu 3+ complexes Eu(bis(mesitoyl)phosphide) 3 (thf) 2 (Eu( mes BAP) 3 (thf) 2 ) and Eu(bis(2,4,6-triisopropylbenzoyl)phosphide) 3 (Eu( tripp BAP) 3 ), as well as the Eu 2+ complex, Eu(bis(2,4,6-triisopropylbenzoyl)phosphide) 2 (dme) 2 (Eu( tripp BAP) 2 (dme) 2 ) (thf = tetrahydrofuran, dme = 1,2-dimethoxyethane). All complexes were characterized using a combination of UV–vis–NIR–IR and NMR spectroscopies, and single-crystal X-ray diffraction (SC-XRD). The magnetic properties of these three monomeric Eu complexes were investigated by variable-temperature magnetic susceptibility. The magnetic data are typical for these ions, with Eu( tripp BAP) 2 (dme) 2 displaying Curie-type behavior. Both Eu( tripp BAP) 3 and Eu( mes BAP) 3 (thf) 2 possess similar 7 F 0 - 7 F 1 spin–orbit energy gaps and a similar zero-field splitting of the 7 F 1 state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasma-Enhanced Atomic Layer Deposition Synthesis of Nanolayered Molybdenum Diselenide (MoSe 2 ) Thin Films for Nanoelectronics

Nanolayered molybdenum diselenide (MoSe 2 ) thin films were synthesized by plasma-enhanced atomic layer deposition (PE-ALD) using molybdenum pentachloride (MoCl 5 ) and diethyldiselenide (C 4 H 10 Se 2 ) precursors. Scanning and transmission electron microscopy revealed horizontally stacked nanolayers near the substrate and vertically oriented nanosheets at the surface of the film. X-ray diffraction confirmed the (002), (100), and (110) reflections of crystalline MoSe 2 , while X-ray photoelectron spectroscopy showed relative atomic concentrations of 33.5% Mo and 66.5% Se, consistent with stoichiometric MoSe 2 . Raman spectra exhibited characteristic E 1g , A 1g , and E$^1_{2g}$ vibrational modes. Field-effect transistors incorporating PE-ALD-grown MoSe 2 as the channel material displayed p-type behavior, demonstrating the potential of nanolayered MoSe 2 for nanoelectronic applications. This work demonstrates the feasibility of low-temperature, stoichiometric growth of nanolayered MoSe 2 by PE-ALD and its direct integration into transistor architectures.

36 MATERIALS SCIENCE↗