Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dissipation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Stimulated dissipation of magnetic discontinuities and the origin of solar flares

It is proposed that the principal cause of the confined solar flare is the dissipation of magnetic energy at the many small-scale pre-existing tangential discontinuities in the local bipolar magnetic field. The discontinuities are a consequence of the continuous shuffling and intermixing of the footpoints of the bipolar field by the turbulent photospheric granules. The X-ray corona within the bipolar field is presumed to be a consequence of the continuing dissipation by reconnection at these discontinuities. A flare results when static deformation and/or internal agitation of the field stimulates the onset of rapid reconnection at the many small internal discontinuities. The discontinuities are partially exhausted by the flare, so that the post-flare X-ray emission of that particular loop is substantially below the pre-flare level for a period of some hours while the discontinuities are being rejuvenated.

Parker, E. N.↗
NASA NTRS1988

Reynolds-stress and dissipation-rate budgets in a turbulent channel flow

The budgets for the Reynolds stresses and for the dissipation rate of the turbulence kinetic energy are computed using direct simulation data of a turbulent channel flow. The budget data reveal that all the terms in the budget become important close to the wall. For inhomogeneous pressure boundary conditions, the pressure-strain term is split into a return term, a rapid term, and a Stokes term. The Stokes term is important close to the wall. The rapid and return terms play different roles depending on the component of the term. A split of the velocity pressure-gradient term into a redistributive term and a diffusion term is proposed, which should be simpler to model. The budget data is used to test existing closure models for the pressure-strain term, the dissipation rate, and the transport rate. In general, further work is needed to improve the models.

Mansour, N. N.↗
NASA NTRS1985

Viscous dissipation effects on thermophoretically augmented aerosol particle transport across laminar boundary layers

The effect of viscous dissipation on mass transport across nonisothermal low-mass-loading laminar boundary layers of dusty gas is investigated theoretically by means of numerical simulations. The derivation of the model is outlined, and numerical results are presented in extensive graphs and characterized in detail. The dissipation effects are found to be significant, increasing total particle-deposition rates; the intensity of the effects depends on the ratio of wall temperature to mainstream static temperature.

Gokoglu, S. A.↗
NASA NTRS1988

A numerical model for gravity wave dissipation in the thermosphere

Two simplified models have been developed for the internal gravity wave dissipation due to viscosity, thermal conduction, and ion-drag in a multilayered, isothermal thermosphere. Both models use the WKB approximation, ray theory, and the time-averaged equations of gravity wave energy conservation. One model uses all the equations appropriate to a dissipative atmosphere, while the other uses the dispersion equation and polarization relations applicable to a nondissipative atmosphere, neglecting the viscous and thermal conduction contributions to the energy flux. Results from these models are compared to each other and to the results obtained by Klostermeyer (1973), using a full-wave model.

Hickey, M. P.↗
NASA NTRS1989

Towards a rigorous approach to artificial dissipation

Artificial dissipation in modern computational fluid dynamics is something of an art. In spite of the dramatic strides made over the last decade, dissipation continues to lack a quantitative theory with predictive power. Such a theory, based on entropy production, is presented. An important side-effect is nonlinear stability for schemes which satisfy certain conditions.

Merriam, Marshal L.↗
NASA NTRS1989

Evolution of the lunar orbit with temperature- and frequency-dependent dissipation

The importance of the thermal evolution of the earth and the moon for the dynamical history of the earth-moon system is investigated using a model of coupled thermal-dynamical evolution of this system, in which the sun's gravity is ignored and only the gravitational interaction of the earth-moon system is included, along with oceanic dissipation. Results suggest that most of the lunar angular momentum was received from the earth via solid tides within the first few 100 million years after the formation of the earth and the moon, indicating that oceanic dissipation plays a minor role. It is suggested that solid tides, rather than ocean tides, might be most important to the lunar-orbit evolution.

Ross, M. N.↗
NASA NTRS1989

Helical, dissipative, magnetohydrodynamic states with flow

It is shown that for an axially periodic column of magnetofluid driven by an applied axial electric field, the total rate of energy dissipation (Ohmic plus viscous) can be lowered by permitting a helical component with vortical flow in the solution. The principle of minimum energy-dissipation rate suggests that this partially helical state will be preferred to the axisymmetric one that exists for the same parameters. The result is consistent with the repeated appearance of such partially-helical states in several fully three-dimensional numerical computations and is not inconsistent with the data from some confinement experiments.

Montgomery, David↗
NASA NTRS1990

Asymptotic analysis of dissipative waves with applications to their numerical simulation

Various problems involving the interplay of asymptotics and numerics in the analysis of wave propagation in dissipative systems are studied. A general approach to the asymptotic analysis of linear, dissipative waves is developed. It was applied to the derivation of asymptotic boundary conditions for numerical solutions on unbounded domains. Applications include the Navier-Stokes equations. Multidimensional traveling wave solutions to reaction-diffusion equations are also considered. A preliminary numerical investigation of a thermo-diffusive model of flame propagation in a channel with heat loss at the walls is presented.

Hagstrom, Thomas↗
NASA NTRS1990

Dissipation of mechanical work and temperature rise in AS4/PEEK thermoplastic composite

The dissipated mechanical work per cycle of sinusoidal stress in the thermoplastic composite material AS4/PEEK was measured as a function of stress amplitude for fixed frequency and fiber orientation. The experimental result shows that the dissipated work per cycle is proportional to the square of the stress amplitude. Using the concept of the equivalent isotropic material, it is shown that the relaxation modulus satisfies a proportionality condition. Also, the rate of temperature rise due to sinusoidal stresses has been measured as a function of stress amplitude. The result shows that the rate of temperature rise is not proportional to the square of the stress amplitude.

Georgiou, I.↗
NASA NTRS1990

Simulation of rotation effect in turbulence dissipation rate equation

It was observed that the Reynolds stress transport equations using the usual isotropic dissipation rate transport equations do not accurately predict the correct evolution of the kinetic energy in both homogeneous shear and isotropic decay. This same effect carries over to more practical flows such as those with strong irrotational strains and/or adverse pressure gradients. The deficiencies in these predictions were attributed to the need for modifications in the isotropic dissipation rate equation. Pope and Hanjalic and Launder have proposed modifications to this equation. These modifications were tested in the cases of homogeneous shear and iso-decay and their performance was analyzed. The results are compared to the rotating flow models of Bardina and Raj.

Raj, Rishi S.↗
NASA NTRS1990

Modeling the dissipation rate in rotating turbulent flows

A variety of modifications to the modeled dissipation rate transport equation that have been proposed during the past two decades to account for rotational strains are examined. The models are subjected to two crucial test cases: the decay of isotropic turbulence in a rotating frame and homogeneous shear flow in a rotating frame. It is demonstrated that these modifications do not yield substantially improved predictions for these two test cases and in many instances give rise to unphysical behavior. An alternative proposal, based on the use of the tensor dissipation rate, is made for the development of improved models.

Speziale, Charles G.↗
NASA NTRS1990

The effects of oppositely sloping boundaries with Ekman dissipation in a nonlinear baroclinic system

The present analytical and numerical examination of the effect of the slope Delta with dissipation delta on baroclinic flows in linear and nonlinear systems uses a modified Eady channel model with oppositely sloping top and bottom Ekman layers, and truncates the spectral wave solution up to six components. Comparisons are made wherever possible with results from beta-plane dissipative systems. In the linear system, the combined effect of Delta and delta strongly stabilizes long waves. In a nonlinear system without wave-wave interaction, Delta stabilizes the flow even for small delta and reduces the domain of vacillation while enlarging the domain of single-wave steady state.

Weng, H.-Y.↗
NASA NTRS1990

Energy conserving and potential-enstrophy dissipating schemes for the shallow water equations

To incorporate potential enstrophy dissipation into discrete shallow water equations with no or arbitrarily small energy dissipation, a family of finite-difference schemes have been derived with which potential enstrophy is guaranteed to decrease while energy is conserved (when the mass flux is nondivergent and time is continuous). Among this family of schemes, there is a member that minimizes the spurious impact of infinite potential vorticities associated with infinitesimal fluid depth. The scheme is, therefore, useful for problems in which the free surface may intersect with the lower boundary.

Arakawa, Akio↗
NASA NTRS1991

Dynamic dissipative compensator design for large space structures

Control system design is considered for attitude control and vibration suppression of flexible space structures. The problem addressed is that of controlling both the zero-frequency rigid-body modes and the elastic modes. Model-based compensators, which employ observers tuned to the plant parameters, are first investigated. Such compensators are shown to generally exhibit high sensitivity to the knowledge of the parameters, especially the elastic mode frequencies. To overcome this problem a class of dynamic dissipative compensators is next proposed, which robustly stabilize the plant in the presence of unmodeled dynamics and parametric uncertainties. An analytical proof of robust stability is given, and a method of implementing the controller as a strictly proper compensator is given. Methods of designing such controllers to obtain optimal performance and robust stability are presented. Numerical and experimental results of application of the methods are presented, which indicate that dynamic dissipative controllers can simultaneously provide excellent performance and robustness.

Joshi, S. M.↗
NASA NTRS1992

Analysis of energy dissipation and deposition in elastic bodies impacting at hypervelocities

A series of impact problems were analyzed using the Eulerian hydrocode CTH. The objective was to quantify the amount of energy dissipated locally by a projectile-infinite plate impact. A series of six impact problems were formulated such that the mass and speed of each projectile were varied in order to allow for increasing speed with constant kinetic energy. The properties and dimensions of the plate were the same for each projectile impact. The resulting response of the plate was analyzed for global Kinetic Energy, global momentum, and local maximum shear stress. The percentage of energy dissipated by the various hypervelocity impact phenomena appears as a relative change of shear stress at a point away from the impact in the plate.

Medina, David F.↗
NASA NTRS1990

Length scales and dissipation of fine eddies in a mixing layer

It has been shown that small scale turbulence is produced by the interactions of the merging spanwise structures (rollers) and the streamwise vortices (ribs). In this study, we examine the dissipation rate of the three dimensional kinetic energy and length scales associated with the dissipation rate in a temporally evolving mixing layer.

Zohar, Y.↗
NASA NTRS1992

Current-driven plasma acceleration versus current-driven energy dissipation. III - Anomalous transport

In the present paper the linear stability description and weak turbulence theory are used to develop a second order description of wave-particle transport and anomalous dissipation. The goal is to arrive at anomalous transport coefficients that can be readily included in fluid flow codes. In particular, expressions are derived for the heating rates of ions and electrons by the unstable waves and for the electron-wave momentum exchange rate that controls the anomalous resistivity effect. Comparative calculations were undertaken assuming four different saturation models: ion trapping, electron trapping, ion resonance broadening, and thermodynamic bound. A foremost finding is the importance of the role of electron Hall parameter in scaling the level of anomalous dissipation for the parameter range of the MPD thruster plasma. Polynomial expressions of the relevant transport coefficients cast solely in terms of macroscopic parameters are also obtained for inclusion in plasma fluid codes for the self-consistent numerical simulation of real thruster flows including microturbulent effects.

Choueiri, Edgar Y.↗
NASA NTRS1992

Determination of the dissipative loss of a two-port network from noise temperature measurements

When radiometric equipment is available, noise temperature measurement techniques provide a convenient and accurate means for determining the dissipative component of the insertion loss of a two-port network. It is increasingly becoming the practice to ignore mismatch errors caused by multiple reflections between the source, the receiver, and the component whose dissipative loss is being measured. Mismatch errors are difficult to determine in practice because of the requirements of having full knowledge of the magnitudes of reflection coefficients and S-parameters. This article shows it is permissible to neglect the effects of mismatch errors if special conditions are met. These special conditions only require that the reflection coefficients of the source and load be made negligibly small and that the two-port network being evaluated has reciprocal and symmetrical properties.

Otoshi, T. Y.↗