SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Solubilization studies were carried out on various cured silicone resins. A solvent spectrum was prepared. It was found that complete dissolution of cured silicone resins could be achieved without extensive physical degradation of samples. Based on the solubilization results, amine solvents were selected for spore viability studies.
A research program is described which consisted of studying the effects of electrode cycling in very pure KOH solutions, with and without controlled additions of impurities, on oxide formation, oxygen evolution kinetics, oxygen reduction kinetics (including hydrogen peroxide formation), and changes in electrode structure. Bright platinum, platinized platinum, and Teflon-bonded platinum black electrodes were studied. Three main problem areas are identified: the buildup of a refractory anodic layer on prolonged cycling, which leads to a degradation of performance; the dissolution and subsequent deposition of dendritic platinum in the separator, leading to short-circuit ing and loss of electrocatalyst; and the disruptive effect of bubbling during gas evolution on charge. Each of these problem areas is analyzed, and remedial solutions are proposed.
Chemical analyses and other measurements made on lunar-treated plant seedlings grown for 14 to 21 days demonstrate a direct interaction between germfree plants and lunar material. Treated plants dissolved and absorbed significant quantities of Al, Fe, and Ti from the lunar fines. Cabbage and Brussels sprouts were particularly efficient in the dissolution and absorption of Mn. These results suggested that the beneficial effects observed in the Apollo 11 and 12 quarantine studies might be caused by the uptake of ions from the lunar material.
There are no author-identified significant results in this report. Repeated coverage over the test site along the northwest coast of Africa showed that the structure of chlorophyll distribution is much more complicated than expected from continuous recordings. ERTS-1 data showed a very fast change in the chlorophyll distribution and it seems that also the concentration changes quickly. ERTS-1 showed on some frames offshore transportation of dust from the Sahara. All frames from Channel 7 will be arranged as a montage to derive the transportation pattern of dust. This step is important in biological aspects of interpreting ERTS-1 data, because the dissolution kinetics of eolian dust particles may influence significantly the chemistry of the surface water. Since visibility and the biochemistry of the test site off Africa are influenced by the dust transport, dust collection will be included in the ground truth program. Besides chlorophyll and other hydrographical parameters, the dust load in the test area will be measured. The collection plan is discussed along with a description of the high volume air sampler and the Anderson particle sizing head sampler to be used for the dust measurements.
A method for determining the quantity of buried contamination using solvents is presented. A nonsporocidal method with which high spore recoveries are achievable from silicone coatings and potting compounds was developed. An extension of the method to silicon potting compound RTV 60 is reported. It is stated that spores remain viable during chemical curing of silicone potting compounds and more than ninety percent of the spore population is recoverable by amine dissolution and proper plating techniques.
The continuing efforts in upscaling to produce larger diameter Al/B tubes are described. While the basic methodology remains unchanged, the larger volume of acrylic binder material and its removal by dissolution in toluene had to be performed by dynamic scrubbing. Similarly, the boron and MCF continuous length requirements increased when a 6 foot long by 7 inches wide mat was needed. These modifications and associated problems are described fully with schematics. Also included are seven experiments conducted to prepare larger tubes. The thermal profile, drawing speeds, and furnace positions in the draw bench bay are presented along with metallographic evidence of composite cross sections.
The results of gas-chromatography and high-resolution mass spectroscopy studies of gases released on deuterium fluoride dissolution of Apollo 12 and 14 lunar samples are reported. The results confirm previous observations that CH4 and C2H6 are released as well as CD4, C2D4, C2D6, and higher deuterated hydrocarbons. The yields correlate with the total carbon content of the samples, and the CH4 and C2H6 released may be regarded as indigenous, while the deuterated products result from hydrolysis of carbide material. The results provide the first experimental confirmation of the hypothesis that the CH4 derives from solar wind interactions.
The methane and carbide concentrations of a number of Apollo 11, 12, 14, and 15 samples of fines and breccias have been examined by the deuterated acid dissolution method. Location studies indicate that these carbon compounds are concentrated in the outer surfaces of the fines particles of 48-152 micron diameter; for larger particles a volume-related component may contribute. In individual samples the methane and carbide concentrations correlate with parameters indicative of lunar surface exposure. The data provide further evidence that solar wind implantation is the major source of the methane in the fines and that the carbide originates from both solar wind implantation and meteorite impacts.
DF dissolution and pyrolysis showed that the indigenous methane and ethane contents in Apollo 14 and 15 lunar samples correlated with the amounts of solar wind gases and the deutero-carbon reaction gases. Pyrolysis evolved mainly CO and N2 and lower amounts of CO2. Other compounds detected and quantitated by these techniques were DCN, HCN, CS2, D2S, and PD3.
During the quarantine periods following each Apollo mission to the moon, various biological systems were placed in the presence of lunar material to determine if pathogenic agents were present. Although no detrimental effects resulted, various responses by the several plant systems tested were noted. One such response was the increased pigmentation observed in the callus tissue cultures of tobacco. Further investigations revealed that these tissues grown in the presence of lunar material resulted in as much as a 35% increase in total pigments while differences in fatty acid and sterol concentrations were also noted when compared to the controls. It is believed that these changes brought about by the lunar material can be attributed to a change in the nutritional environment caused by its dissolution.
The effect of noncondensable gases on high-performance arterial heat pipes was investigated both analytically and experimentally. Models have been generated which characterize the dissolution of gases in condensate, and the diffusional loss of dissolved gases from condensate in arterial flow. These processes, and others, were used to postulate stability criteria for arterial heat pipes under isothermal and non-isothermal condensate flow conditions. A rigorous second-order gas-loaded heat pipe model, incorporating axial conduction and one-dimensional vapor transport, was produced and used for thermal and gas studies. A Freon-22 (CHCIF2) heat pipe was used with helium and xenon to validate modeling. With helium, experimental data compared well with theory. Unusual gas-control effects with xenon were attributed to high solubility.
Optical microscopic studies of two intermediate pieces of 72255, located 1 to 3 cm below the surface, indicate an upper limit to the track exposure age of 15 to 20 m.y. A striking feature of the track studies of breccias 72255 and 72275 is the peculiar etching behavior of many of the feldspar and olivine crystals. After standard etching procedures, crystal surfaces are frequently irregular and bumpy, presumably owing to nonuniform dissolution of the surface. Although this effect was not observed in feldspars or olivines in samples from other missions, it is apparently widespread among Apollo 17 samples.
The carbon chemistry of the Apollo 15 and 16 deep drill cores is a function of the surface exposure plus the chemical and mineralogical composition of the individual samples. The depth profiles of carbide and methane yields in the Apollo 15 core show a general decline with depth and correlate with the solar wind noble gas content, percentage agglutinates, track densities, and metallic iron. All horizons examined were exposed for a considerable time on the lunar surface. The Apollo 16 core samples show that chemical and mineralogical composition plays an important role in determining the nature of carbide-like material present in the fines. The higher aluminum and calcium contents and lower iron contents of highlands material result in carbide-like material yielding less CD4 and more C2D2 (deuteroacetylene) upon DF acid dissolution.
The deformation behavior of Ti-8 wt % Al has been investigated in an inert environment (air), and an aggressive environment (salt water). Details of surface slip geometry were examined by high resolution surface replicas at various stages of deformation in both environments. Specimens aged to contain a fine dispersion of Ti3Al precipitates failed by subcritical crack growth in salt water, whereas specimens in the single phase condition showed no effects of environment on the yield or fracture characteristics. The Ti3Al precipitates produce little change in strength level or slip character compared to the single phase alloy, and there is no evidence of any effects of environment on the character of surface slip. Rather, the presence of trenches along slip bands on the surface of aged specimens suggest that the specific effect of the Ti3Al precipitates is to render the surface slip steps chemically active relative to the surrounding matrix by slip induced dissolution of the particles.
The Nedagolla meteorite was recognized by Axon to be a rare example of an iron which has been preterrestrially reheated to the point of melting. The dendrite secondary arms are spaced 200 microns apart, implying that Nedagolla solidified and cooled at about 0.02 C/sec. The presence of (Fe, Cr)(1-x)S inclusions precipitated during cooling in the interdendritic regions, and evidence of solute redistribution of Ni, Cr, Co, Si, and P are consistent with this cooling rate. Such a rate indicates that Nedagolla cooled very near the surface of its parent 'body'. Secondary microstructural features including the presence of isothermal taenite and minute phosphide precipitates, which have formed from the dissolution of primary phosphide material, indicate a later reheating to about 750 C for a period of several hours.
The empirical information on protostars is reviewed. 'Globules' are described, found to have the typical range of stellar masses and with gaseous compositions now well known thanks largely to radio astronomy. They also contain particulate matter identified as silicates, ice, and probably graphite and other carbon compounds. Current knowledge of the degree of stability of the planetary orbits over the past 4.5 b.y. is summarized. The statistics on the frequency and masses of asteroids and information on the Kirkwood gaps, both empirical and theoretical, are cited. An analogous discussion is made for the Rings of Saturn, including its extension observed in 1966 to the fourth Saturn satellite, Dione. The three main classes of meteorites - irons, stones, and carbonaceous chondrites - all appear to be of asteroidal origin and they yield the most direct evidence on the early thermal history of the solar system. The author sees in this evidence definite confirmation of the cold origin of the planetary system, followed by a hot phase due to the evolving sun that caused the dissolution of the solar nebula.
A non-sporicidal technique for solvent degradation of cured silicone polymers was developed which involves chemical degradation of cured silicone polymers by amine solvents at room temperature. Substantial improvements were obtained in the recovery of seeded spores from room temperature cured polymers as compared to the standard recovery procedures, which indicates that the curing process is not sufficiently exothermic to reduce spore viability. The dissolution reaction of cured silicone polymers whith amine solvents is proposed to occur by bimolecular nucleophilic displacement. The chemical structure of silicone polymers was determined by spectroscopic methods. The phenyl to methyl ratio, R/Si ratio, molecular weight, and hydroxyl content of the silicone resins were determined.
The development of large-scale wavelike eddies in a two-dimensional turbulent jet was studied. The basic mean flow develops from a mixing region type with an initial specified boundary layer thickness into a fully developed jet. The role of the varicose and sinuous modes as these develop in a growing mean flow is brought out. In general, it was found, for a given frequency parameter, the varicose mode has a shorter streamwise lifetime than the sinuous mode. The latter, for lower frequency ranges, persists past the end of the potential core only to be subject to dissolution by the more enhanced fine scale turbulent activity in that region.