Search NASA⌕ Search

SEARCH · Search NASA

Results for “Doped Fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Evaluation of CO2 and CO dopants in hydrogen to reduce hydrogen permeation in the Stirling engine heater head tube alloy CG-27

Tubes of CG-27 alloy, filled with hydrogen doped with various amounts of carbon dioxide and carbon monoxide, were heated in a diesel fuel fired Stirling engine simulator materials test rig for 100 hours at 820 C and at a gas pressure of 15 MPa to determine the effectiveness of the dopants in reducing hydrogen permeation through the hot tube wall. This was done for clean as-heat treated tubes and also for tubes that had previously been exposed for 100 hours to hydrogen doped with 1.0 volume percent carbon dioxide to determine if the lower levels of dopant could maintain a low hydrogen permeation through the hot tube wall. Carbon dioxide, as a dopant in hydrogen, was most effective in reducing hydrogen permeation through clean tubes and in maintaining low hydrogen permeation after prior exposure to 1.0 volume percent carbon dioxide. Only the lowest level of carbon dioxide (0.05 volume percent) was not as effective in the clean or prior exposed tubes. Carbon monoxide as a dopant in hydrogen was less effective than carbon dioxide at a given concentration level. Of the four dopant levels studied; 1.0, 0.5, 0.2, and 0.05 volume percent carbon monoxide, only the 1.0 and 0.5 volume percent were effective in reducing and maintaining low hydrogen permeation through the CG-27.

Misencik, J. A.↗
NASA NTRS2005

Protonic Conduction of BaCe0.85YO. 1503 Doped with SrTiO3

Reformers based on ceramic membrane technology potentially offer hydrogen production that is comparable to the cost of fossil fuels. Protonic conducting ceramic with the chemical formula AB03 offers the promise of highly selective hydrogen separation at intermediate temperature (400-800 C). Among different perovskite-type oxides, BaCe03 and SrCe03 based compositions show high protonic conductivities but strong resistance to densification. X-ray diffraction studies on sintered specimens of BaCe0.85Y0.1503-6 show multi-phase formation which was found to show dependence upon powder synthesis method. Doping with SrTiO3 suppresses multi-phase formation and enhances grain growth. Conductivity measurements in temperature range of 200 to 1000 C were performed by ac impedance spectroscopy under dry and wet conditions. Sintering behavior, phase formation and conductivity results will be reported.

Dynys, Frederick W.↗
DOE OSTI2024

Cobalt‐Doped Bismuth Nanosheet Catalyst for Enhanced Electrochemical CO 2 Reduction to Electrolyte‐Free Formic Acid

Electrochemical carbon dioxide (CO 2 ) reduction reaction (CO 2 RR) to valuable liquid fuels, such as formic acid/formate (HCOOH/HCOO − ) is a promising strategy for carbon neutrality. Enhancing CO 2 RR activity while retaining high selectivity is critical for commercialization. To address this, we developed metal-doped bismuth (Bi) nanosheets via a facile hydrolysis method. These doped nanosheets efficiently generated high-purity HCOOH using a porous solid electrolyte (PSE) layer. Among the evaluated metal-doped Bi catalysts, Co-doped Bi demonstrated improved CO 2 RR performance compared to pristine Bi, achieving ~90 % HCOO − selectivity and boosted activity with a low overpotential of ~1.0 V at a current density of 200 mA cm −2 . In a solid electrolyte reactor, Co-doped Bi maintained HCOOH Faradaic efficiency of ~72 % after a 100-hour operation under a current density of 100 mA cm −2 , generating 0.1 M HCOOH at 3.2 V. Density functional theory (DFT) results revealed that Co-doped Bi required a lower applied potential for HCOOH generation from CO 2 , due to stronger binding energy to the key intermediates OCHO* compared to pure Bi. In conclusion, this study shows that metal doping in Bi nanosheets modifies the chemical composition, element distribution, and morphology, improving CO 2 RR catalytic activity performance by tuning surface adsorption affinity and reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Supercritical preparation of doped (111) facetted nickel oxide for the oxygen evolution reaction

Green hydrogen is of great interest as a replacement for traditional fossil fuels in a variety of energy applications. However, due to the poor kinetics present in the oxygen evolution reaction (OER) half-reaction, nanostructured catalysts are needed to reduce the reaction overpotential. Nickel oxide has previously been shown to be a promising alternative to expensive Pt-group based catalysts for the OER in alkaline media. Herein, facetted NiO nanosheets have been doped with Fe, Mn, or Co to reduce its catalytic overpotential for the OER. A supercritical synthesis process was used to promote the mass transport of the reactants while preserving catalytic surface area. Microscopy, diffraction, spectroscopy, and adsorption techniques were used to understand the morphological changes resulting from the inclusion of each dopant, as well as characterize the surface chemistry presented by the doped (111) facet. The pH was found to affect the properties of mixing due to difference in hydrolysis rates and catalysis of the hydrolysis/condensation. The dopants exhibited distinct effects on OER activity: Mn increased the overpotential to 742 mV vs. RHE, while Co and Fe reduced it to 502 mV and 457 mV, respectively. In summary, a straightforward and novel synthesis method is presented to prepare doped NiO(111) nanosheets, and their surface characteristics are explored to understand their varied electrochemical performances.

08 HYDROGEN↗
DOE OSTI2020

Performance enhancement and degradation mechanism identification of a single-atom Co–N–C catalyst for proton exchange membrane fuel cells

Development of platinum group metal (PGM)-free catalysts for oxygen reduction reaction (ORR) has been a strategic research topic for proton exchange membrane (PEM) fuel cells. Present state-of-art PGM-free ORR catalysts are Fe, N co-doped carbon (Fe-N-C) catalysts, which unfortunately exhibit instability concerns. Herein, we report a stable atomically dispersed Co, N co-doped carbon (Co-N-C) catalyst with high Co content of 1.0 at% and the active site, i.e., the coordination of Co, is CoN2+2 in nature. The Co-N-C catalyst demonstrated high ORR activity comparable to, and high stability over 3 times better than, that of the Fe-N-C catalyst. It also achieved a high activity of 22 mA cm2 at 0.9 ViR-free and a power density of 0.61 W cm-2 under 1.0 bar H2/O2. Further, we identify two main degradation mechanisms of the PGM-free catalysts: catalyst oxidation by H2O2/radicals and demetalation. The improved stability of Co-N-C relative to Fe-N-C is attributed to less Fenton-reactive nature of Co and significantly enhanced resistance to demetalation of Co-N-C.

Xie, Xiaohong↗
DOE OSTI2023

Photo-scanning Electrochemical Microscopy Observation of Overall Water Splitting at a Single Aluminum-Doped Strontium Titanium Oxide Microcrystal

Particulate photocatalysts for the overall water-splitting (OWS) reaction offer promise as devices for hydrogen fuel generation. Even though such photocatalysts have been studied for nearly five decades, much of the understanding of their function is derived from observations of catalyst ensembles and macroscopic photoelectrodes. This is because the sub-micrometer size of most OWS photocatalysts makes spatially resolved measurements of their local reactivity very difficult. Here we employ photo-scanning electrochemical microscopy (photo-SECM) to quantitatively measure hydrogen and oxygen evolution at individual OWS photocatalyst particles for the first time. Micrometer-sized Al-doped SrTiO 3 /Rh 2-y Cr y O 3 photocatalyst particles were immobilized on a glass substrate and interrogated with a chemically modified SECM nanotip. The tip simultaneously served as a light guide to illuminate the photocatalyst and as an electrochemical nanoprobe to observe oxygen and hydrogen fluxes from OWS. Local O 2 and H 2 fluxes obtained from chopped light experiments and photo-SECM approach curves using a COMSOL Multiphysics finite-element model confirmed stoichiometric H 2 /O 2 evolution of 9.3/4.6 μmol cm -2 h -1 with no observable lag during chopped illumination cycles. Additionally, photoelectrochemical experiments on a single microcrystal attached to a nanoelectrode tip revealed a strong light intensity dependence of the OWS reaction. Here these results provide the first confirmation of OWS at single micrometer-sized photocatalyst particles. The developed experimental approach is an important step towards assessing the activity of photocatalyst particles at the nanometer scale.

25 ENERGY STORAGE↗
DOE OSTI2022

PtRu Catalysts on Nitrogen-Doped Carbon Nanotubes with Conformal Hydrogenated TiO 2 Shells for Methanol Oxidation

The methanol oxidation reaction (MOR) is the limiting factor in direct methanol fuel cells (DMFC). There is an urgent need to improve the catalytic activity and stability of MOR catalysts. This study reports a highly active PtRu catalyst for MOR based on a hybrid multifunctional catalyst support consisting of a conformal amorphous hydrogenated TiO 2 shell wrapped around the oxygenated N-doped carbon nanotube core, denoted as PtRu/TiO 2 / ONCNT-400. Both the TiO 2 shell and the subsequent PtRu nanoparticles are deposited by a rapid microwave-assisted synthesis processes. The hydrogenated TiO 2 shell is found to exhibit a strong interaction with the deposited PtRu catalyst nanoparticles and effectively prevent them from agglomeration during the postdeposition thermal annealing to form more active crystalline PtRu alloy catalysts. In addition, the defective hydrogenated TiO 2 shell enhances the PtRu catalyst activity by the synergistic effects of partial charge transfer from TiO 2 to PtRu and high oxophilicity, which improves the kinetics of oxidation of poisonous CO intermediate to CO 2 . The mass activity for MOR and long-cycling stability of the PtRu/TiO 2 /ONCNT-400 catalyst surpass the two benchmark commercial PtRu/C catalysts from Johnson Matthey (JM) and Tanaka KiKinzoku (TKK), respectively. Furthermore, the results demonstrate that PtRu/TiO 2 /ONCNT-400 can serve as an efficient catalyst for MOR in DMFC.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning the Co/Fe ratio in BaCo x Fe 0.8– x Zr 0.1 Y 0.1 O 3– δ , a promising triple ionic and electronic conducting oxide, to boost electrolysis and fuel cell performance

The triple conducting oxide BaCo 0.4 Fe 0.4 Zr 0.1 Y0.1O 3–δ (BCFZY4411), which accommodates simultaneous transport of protons, oxygen ions, and p-type electronic carriers, has been intensively investigated in recent years as a high-performance positive electrode material for fuel cell and electrolysis applications. The heavy Co and Fe-based transition metal doping in BCFZY4411 ensures adequate electrical conductivity while the multiple oxidation states of Co and Fe assist the electrocatalytic and redox ability. Despite the considerable role of Co and Fe transition metal doping in controlling electrochemical activity, however, the study of alternative BCFZY compositions with varying Co/Fe ratios has not yet been pursued. Here, we evaluate the electrochemical performance of a series of BaCo x Fe 0.8–x Zr 0.1 Y0.1O 3–δ compositions with varying Co/Fe ratio (x = 0.1, 0.2, 0.4, 0.6, 0.7) and use oxygen ion tracer diffusion and in situ high-temperature X-ray diffraction to investigate the effect of Co/Fe ratio on electrocatalytic activity, electronic conductivity, oxygen ion incorporation and transport kinetics, and thermomechanical behavior. We find that Co-rich BCFZY7111 yields the highest performance due to exceptionally high oxygen vacancy diffusion and shows a lower and more linear thermal expansion behavior compared to Fe-rich compositions. A protonic ceramic button cell incorporating a BCFZY7111 positive electrode yields a peak power density of 695 mW cm –2 under fuel cell mode and an electrolysis current density of 1976 mA cm –2 at 1.4 V at 600 °C, underscoring the promise of this new BCFZY electrode composition.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Precipitation of dopants on acceptor-doped LaMnO3±δ revealed by defect chemistry from first principles

Perovskite oxides degrade at elevated temperatures while precipitating dopant-rich particles on the surface. A knowledge-based improvement of surface stability requires a fundamental and quantitative understanding of the dopant precipitation mechanism on these materials. We propose that dopant precipitation is a consequence of the variation of dopant solubility between calcination and operating conditions in solid oxide fuel cells (SOFCs) and electrolyzer cells (SOECs). To study dopant precipitation, we use 20% (D = Ca, Sr, Ba)-doped LaMnO3+δ (LDM20) as a model system. We employ a defect model taking input from density functional theory calculations. The defect model considers the equilibration of LDM20 with a reservoir consisting of dopant oxide (DO), peroxide (DO2), and O2 in the gas phase. The equilibrated non-stoichiometry of the A-site and B-site as a function of temperature, T, and oxygen partial pressure, p(O2), reveals three regimes for LDM20: A-site deficient (oxidizing conditions), A-site rich (atmospheric conditions), and near-stoichiometric (reducing conditions). Assuming an initial A/B non-stoichiometry, we compute the dopant precipitation boundaries in a p–T phase diagram. Our model predicts precipitation both under reducing (DO) and under highly oxidizing conditions (DO2). We found precipitation under anodic, SOEC conditions to be promoted by large dopant size, while under cathodic, SOFC conditions precipitation is promoted by initial A-site excess. The main driving forces for precipitation are oxygen uptake by the condensed phase under oxidizing conditions and oxygen release assisted by B-site vacancies under reducing conditions. Possible strategies for mitigating dopant precipitation under in electrolytic and fuel cell conditions are discussed.

Hess, Franziska (ORCID:000000024460643X)↗
DOE OSTI2025

Controlled phosphate doping into nanoscopic SiO 2 proton conducting membranes

This article describes a method to introduce phosphate (PO 4 ) into SiO 2 atomic layer deposition (ALD) films in a self-limiting fashion. The method involves the use of a less common phosphate precursor, trimethyl phosphite [P(OMe) 3 ], to introduce PO 4 as a low-level dopant, <1 at. %, into a SiO 2 ALD process using bis(ethylmethylamino)silane and a modified O 3 conversion. P(OMe) 3 does not deposit a film with typical oxygen sources but incorporates as PO 4 in an ABC-type ALD scheme at deposition temperatures ranging from 100 to 300 °C. Addition of up to ∼1 at. % of PO 4 does not significantly impact the film density or concentrations of carbon and nitrogen impurities, which are both <0.4 at. %. Despite the relatively low dopant concentrations, PO 4 incorporation is shown to have a large impact on transport properties of the film. When explored as proton (H + )-conducting membranes, undoped SiO 2 ALD films showed H + conductivities (3 × 10 −6 –8 × 10 −5 S cm −1 ) and low H 2 permeabilities (<10 −9 cm 2 s −1 ) when measured at room temperature. The addition of PO 4 is shown to increase H + conductivity to 2 × 10 −4 S cm −1 , while maintaining low H 2 permeability of <10 −9 cm 2 s −1 . The ratio of H + conductivity to H 2 permeability, a key performance metric for H + -conducting membranes used in water electrolyzers, exceeds that of commercial Nafion-117 membranes. Here, the moderate H + conductivity and very low H 2 permeability of PO 4 -doped SiO 2 films make them promising candidates as fluorine-free replacements for Nafion in applications such as water electrolysis, hydrogen fuel cells, and redox flow batteries.

Atomic layer deposition↗
DOE OSTI2020

Morphology and Transport of Multivalent Cation-Exchanged Ionomer Membranes Using Perfluorosulfonic Acid–Ce Z+ as a Model System

Perfluorosulfonic acids (PFSAs) are commonly used as solid polymer electrolyte membranes (PEMs) in electrochemical energy devices, where they are vulnerable to attack by radical species during operation. A popular strategy to combat this problem is to introduce radical scavengers like cerium (Ce) ions that neutralize these species before they attack the PFSA. Such cation doping creates a multi-ion system, in which understanding the mechanisms of cation solvation and transport becomes important for the effective design and utilization of PFSA–cation systems. Ce ions also provide a representative model system for multication-exchanged ionomers in electrochemical systems. In this study, hydration and conductivity measurements, along with X-ray fluorescence and scattering, are employed to elucidate how Ce ion exchange alters PFSA’s ionic solvation, as well as nano- and mesoscale morphologies, which ultimately control its ion transport properties. A molecular transport model is used to deconvolute the impact of Ce ions on the local solvation structure of water in the membrane from mesoscale changes of the transport pathways. The combined experimental and theoretical analysis reveals a nonlinear decrease in conductivity driven by cation solvation at the molecular level and morphological changes at longer length scales. Migration–diffusion coupling, its nonlinear dependence on ion exchange and hydration, and its overall implications for ionomer performance are also discussed. Finally, these findings have the potential to be translated into other mixed cation–ionomer systems for a wide range of energy and environmental devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fission gas diffusion and release for Cr 2 O 3 -doped UO 2 : From the atomic to the engineering scale

Here, the anticipated benefits of large grains in Cr 2 O 3 -doped UO 2 pellets include improved mechanical and fission gas retention properties. To support the assessment of fission gas release (FGR) from doped pellets, the impact of doping on fission gas diffusivity for in-reactor conditions must be understood. In this work, we tackle this issue by informing the fission gas model within the BISON fuel performance code using material models developed at the atomic scale. The investigation of intra-granular fission gas diffusivity in Cr 2 O 3 -doped UO 2 is carried out by adapting a cluster dynamics model that, accounting for UO 2 thermochemistry, is capable of describing Xe diffusion under irradiation in undoped UO 2 as the starting point. Using a thermodynamic analysis, it is shown that in stoichiometric UO 2 with additions of Cr 2 O 3 the oxygen potential is defined by the Cr-Cr 2 O 3 two-phase equilibrium. Using the cluster dynamics model, the predicted Xe diffusivity in doped UO 2 was significantly increased in both the intrinsic and irradiation-enhanced regimes compared to undoped UO 2 as a result of higher concentrations of uranium and oxygen vacancies, respectively. This is a consequence of the more oxidizing conditions at high temperature, and more reducing conditions at low temperature, as a result of doping. Arrhenius functions have been fitted to the cluster dynamics results to enable implementation of the new diffusivities in the BISON fission gas behavior model. BISON simulations were carried out, showing the competing effects of the enlarged grains and the new fission gas diffusivity model, which act to suppress and enhance fission gas release, respectively. The new physics-informed model was validated against in-reactor experimental measurements under normal operation. Additionally, benchmarking was carried out for power ramp conditions. The predicted fission gas release agreed well with the experimental data, showing noticeable improvements over the standard UO 2 model.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Doping of BiScO3-PbTiO3 Ceramics for Enhanced Properties

High-temperature piezoelectrics are a key technology for aeronautics and aerospace applications such as fuel modulation to increase the engine efficiency and decrease emissions. The principal challenge for the insertion of piezoelectric materials is the limitation on upper use temperature which is due to low Curie-Temperature (T(sub c) and increasing electrical conductivity. BiScO3 -PbTiO3 (BS-PT) system is a promising candidate for improving the operating temperature for piezoelectric actuators due to its high TC (>400 C). Effects of Zr and Mn doping of the BS-PT ceramics have been studied and all electrical and electromechanical properties for Sc-deficient and Ti-deficient BS- PT ceramics are reported as a function of electrical field and temperature. Donor doping with Zr and Mn (in Sc deficient compositions) increased the DC-resistivity and decreased tan at all temperatures. Resulting ceramics exhibited saturated hysteresis loops with low losses and showed no dependence on the applied field (above twice the coercive field) and measurement frequency.

Sehirlioglu, Alp↗
NASA NTRS1984

Saturated laser fluorescence in turbulent sooting flames at high pressure

The primary objective was to develop a quantitative, single pulse, laser-saturated fluorescence (LSF) technique for measurement of radical species concentrations in practical flames. The species of immediate interest was the hydroxyl radical. Measurements were made in both turbulent premixed diffusion flames at pressures between 1 and 20 atm. Interferences from Mie scattering were assessed by doping with particles or by controlling soot loading through variation of equivalence ratio and fuel type. The efficacy of the LSF method at high pressure was addressed by comparing fluorescence and adsorption measurements in a premixed, laminar flat flame at 1-20 atm. Signal-averaging over many laser shots is sufficient to determine the local concentration of radical species in laminar flames. However, for turbulent flames, single pulse measurements are more appropriate since a statistically significant number of laser pulses is needed to determine the probability function (PDF). PDFs can be analyzed to give true average properties and true local kinetics in turbulent, chemically reactive flows.

King, G. B.↗
DOE OSTI2020

Dual conductor surface modified SOFC cathode particles and methods of making same

A novel method to produce ALD films disposed on powders is disclosed. Examples include the formation of a cobalt doped zirconia (CDZ), hafnia, and cobalt doped hafnia (CDH) films on lanthanum strontium cobalt iron oxide (LSCF) powder for solid oxide fuel cell cathodes. The coated powders are sintered into porous cathodes that have utility for preventing the migration of cations in the powder to the surface of the sintered cathode and/or other performance enhancing attributes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Enhanced Catalytic Activity of a Vanadium-Doped Mesoporous Octahedral Molecular Sieve-2 (K-OMS-2) toward Hydrogen Evolution Reaction

Hydrogen evolution reaction (HER) is the cathodic reaction in electrochemical water splitting that produces H 2 in a renewable pathway, primarily to be used in fuel cells. K-OMS-2, a manganese octahedral molecular sieve, has the potential to replace Pt as a catalyst for HER due to its redox and electrochemical properties, which can be further improved by doping metal cations into the K-OMS-2 framework. In this work, we synthesized 1, 5, and 10% vanadium- (V) doped mesoporous K-OMS-2 under mild acidic reaction conditions. Here, the mesoporous nature of the samples was confirmed by BET analysis. X-ray photoelectron spectroscopy confirmed that Mn has 2+, 3 +, and 4+ oxidation states, and V is present as V 4+ in V-K-OMS-2 samples. HER performance of 1% V-K-OMS-2 in an acidic medium shows the best activity with -0.32 V overpotential. The overpotential was lowered by 0.56 V upon doping 1% V into the K-OMS-2 framework. The 1% V-K-OMS-2 material has a Tafel slope of 129 mV/decay and an electrochemically active surface area (ECSA) of 127.5 cm 2 ECSA .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Microstructural and crystallographic effects of sol-gel synthesized Ti-doped UO 2 sintered under reducing conditions

Titanium (Ti)-doped UO 2 microspheres of three different Ti concentrations (1000, 2000, and 4000 wppm) were synthesized using an internal gelation process. The microspheres were pressed into pellets, and a two-step heat treatment was applied to form monolithic cylindrical pellets with high densities (≥95%TD). Microstructure of these samples consisted of equiaxed grains with >300% increase in average grain size compared to the undoped UO 2 pellets. Secondary Ti-rich chemical phases corresponding to a liquid eutectic formed during sintering were observed at grain boundaries of UO 2 for samples doped with 4000 wppm Ti. Furthermore, these Ti-rich chemical phases were not observed in 1000 or 2000 wppm Ti samples at microscale using electron microscopy investigations. The 0.02–0.04% lower lattice parameter values for the Ti-doped UO 2 samples compared to the undoped UO 2 confirms the incorporation of Ti into the UO 2 lattice.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗