Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamical evolution and stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Double X/Peanut structures in barred galaxies – insights from an N -body simulation

ABSTRACT Boxy, peanut-, or X-shaped ‘bulges’ are observed in a large fraction of barred galaxies viewed in, or close to, edge-on projection, as well as in the Milky Way. They are the product of dynamical instabilities occurring in stellar bars, which cause the latter to buckle and thicken vertically. Recent studies have found nearby galaxies that harbour two such features arising at different radial scales, in a nested configuration. In this paper, we explore the formation of such double peanuts, using a collisionless N-body simulation of a pure disc evolving in isolation within a live dark matter halo, which we analyse in a completely analogous way to observations of real galaxies. In the simulation, we find a stable double configuration consisting of two X/peanut structures associated with the same galactic bar – rotating with the same pattern speed – but with different morphology, formation time, and evolution. The inner, conventional peanut-shaped structure forms early via the buckling of the bar, and experiences little evolution once it stabilizes. This feature is consistent in terms of size, strength, and morphology, with peanut structures observed in nearby galaxies. The outer structure, however, displays a strong X, or ‘bow-tie’, morphology. It forms just after the inner peanut, and gradually extends in time (within 1–1.5 Gyr) to almost the end of the bar, a radial scale where ansae occur. We conclude that, although both structures form, and are dynamically coupled to, the same bar, they are supported by inherently different mechanisms.

Ciambur, Bogdan C.↗
DOE OSTI2020

Role of Solvent Rearrangement on Mg2+ Solvation Structures in Dimethoxyethane Solutions Using Multimodal NMR Analysis

One of the main impediments faced for predicting important emergent properties of a multivalent electrolyte (such as conductivity and electrochemical stability) is the lack of quantitative analysis of ion-ion and ion-solvent interactions, which manifest in solvation structures and dynamics. In particular, the role of ion-solvent interactions is still unclear in cases where the strong electric field from multivalent cations can influence structural evolution of lower permittivity organic solvent molecules on solvation structure. These influences are commonly refered to as electrostriction pheonmena. Using quantitative 1H, 19F, 17O, and 25Mg NMR together with 19F nuclear spin relaxation and diffusion measurments, we find an unusual correlation between ion concentration and solvation structure of Mg(TFSI)2 salt in dimethoxyethane (DME) solution. The domiant solvation structure evolves from contact ion pairs (i.e. [Mg(TFSI)(DME)1-2]+) to fully solvated clusters (i.e. [Mg(DME)3]2+) as salt concentration increases or as temperature decreases. This transition is coupled to a phase separation, which we study here between 0.06 M and 0.36 M. Subsequent analysis is based on an explanation of the electrostriction phenomena and the competion between solvent molecules and TFSI anions for cation coordination.

Chen, Ying↗
DOE OSTI2021

Eject, crash, or survive: Using machine learning to predict orbital instability of exoplanetary systems

Astronomers throughout history, including titans like Kepler and Newton, have tackled planetary dynamics and orbital instability. Despite strides taken in research, understanding the evolution of planetary orbits remains an intricate, computationally expensive, and analytically unsolved problem. I apply machine learning classification methods to numerical simulations of planetary systems in order to predict the long-term fate of the planet - whether the planet remains in a stable orbit or not. My method uses the first 41.1 years (≤ 500 orbits) of data from a planet’s simulation to calculate 17 dynamically-motivated metrics; I trained my classifier on these features to predict a planet’s stability after 107 years. At 84.33%, my classifier was comparable in accuracy to pre-existing literature, despite using significantly less computational power than most other methods. In my research, I found that the standard deviation of eccentricity, mass ratios for neighboring planets, and semi-major axis ratio with the outer planet neighbor to be the most predictive features of instability. I propose reasons for the importance of these features, their role in planetary dynamics, as well as possible explanations for why some planets were misclassified. By understanding the important metrics of instability and reasons for misclassification, we can begin to understand more about system architectures, orbital motion and dynamics, and the formation and evolution of the exoplanetary systems. This is applicable in our own Solar System, and with exoplanet discovery missions such as TESS, this research becomes especially relevant in understanding the new exoplanetary systems we discover.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Eject, crash, or survive: Using machine learning to predict orbital instability of exoplanetary systems

Astronomers throughout history, including titans like Kepler and Newton, have tackled planetary dynamics and orbital instability. Despite strides taken in research, understanding the evolution of planetary orbits remains an intricate, computationally expensive, and analytically unsolved problem. I apply machine learning classification methods to numerical simulations of planetary systems in order to predict the long-term fate of the planet - whether the planet remains in a stable orbit or not. My method uses the first 41.1 years (≤ 500 orbits) of data from a planet’s simulation to calculate 17 dynamically-motivated metrics; I trained my classifier on these features to predict a planet’s stability after 107 years. At 84.33%, my classifier was comparable in accuracy to pre-existing literature, despite using significantly less computational power than most other methods. In my research, I found that the standard deviation of eccentricity, mass ratios for neighboring planets, and semi-major axis ratio with the outer planet neighbor to be the most predictive features of instability. I propose reasons for the importance of these features, their role in planetary dynamics, as well as possible explanations for why some planets were misclassified. By understanding the important metrics of instability and reasons for misclassification, we can begin to understand more about system architectures, orbital motion and dynamics, and the formation and evolution of the exoplanetary systems. This is applicable in our own Solar System, and with exoplanet discovery missions such as TESS, this research becomes especially relevant in understanding the new exoplanetary systems we discover.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

In situ probing of structure and deagglomeration of SnO 2 colloids via small-angle X-ray scattering

Transforming dry nanopowders into stable colloidal dispersions remains challenging due to the cohesive forces between the nanoparticles (NPs) which promote agglomeration. Effective dispersion and deagglomeration of these agglomerates is a critical process in the formulation and preparation of nanoparticle-based functional materials via the colloidal route. Understanding the deagglomeration dynamics provides information to improve microstructural quality in various applications by enabling engineering of agglomerate size, structure and morphology. However, the deagglomeration process dynamics with respect to the evolution of the fractal agglomerate structures, particularly for very small NPs, is still poorly understood and requires further investigation. This study employs in situ small-angle X-ray scattering (SAXS) to investigate the sonication-induced deagglomeration of SnO 2 NPs. Electrostatically stabilized SnO 2 colloids with varying primary particle size (6–21 nm) are investigated in a specifically designed in situ cell using synchrotron-based SAXS to study the influence of sonication time and intensity on the nanoscaled agglomerates. Complete structural analysis via SAXS reveals a direct correlation between changes in agglomerate size and structure, size-dependent deagglomeration behavior and a dependence on the overall energy introduced during sonication into the dispersion regardless of the actual power as well as ultrasonic process parameters in case of SnO 2 NPs. The results suggest that control of the dispersion process during ultrasonic deagglomeration results in tailoring agglomerates with respect to size and structure.

Deagglomeration↗
NASA NTRS1987

Crustal dynamics project data analysis, 1986. Volume 1: Fixed station VLBI geodetic results

The Goddard VLBI group reports the results of analyzing 361 Mark III VLBI data sets from fixed observatories through the end of 1985 which are available to the Crustal Dynamics Project. All POLARIS/IRIS full-day data sets are included. The mobile VLBI sites at Platteville, Colorado; Penticton, British Columbia; and Yellowknife, Northwest Territories are also included since these occupations bear on the study of plate stability. Two large solutions, GLB027 and GLB028, were used to obtain site/baseline evolutions and earth rotation parameters, respectively. Source positions and nutation offsets were also adjusted in each solution. The results include 23 sites and 101 baselines.

Ma, C.↗
NASA NTRS1985

On the gravitational stability of the interstellar medium in spiral arms

The dynamics of self-gravitating gaseous density perturbations in the tightly wound spiral-arm model of the forcing potential (Brown 1969) is investigated. The cloud ensemble of the cold phase of the interstellar medium is regarded as a collisional gas whose 'molecules' are the clouds themselves, and the dynamical evolution of density perturbations is calculated assuming this gas obeys a polytropic pressure-density law. It is suggested that the formation of extreme Population I objects found predominantly along the arms of Sb/Sc systems is regulated by an overall energy balance in the cloud fluid. A single parameter is found which appears to characterize the flow's gravitational response to perturbations; this spiral parameter, Q-sub-sp, differs from the Toomre Q parameter by a factor of the square root of the density enhancement at the shock. It is necessary but not sufficient that Q-sub-sp be less than unity for significant growth to occur.

Balbus, S. A.↗
NASA NTRS1985

Observational and theoretical studies of the evolving structure of baroclinic waves: Attractor dynamics of global weather systems

Significant progress was made in developing a six-component dry model of mid-latitude baroclinic wave evolution, and a ten-component moist model. These models include representations of airflow over mountians and non-adiabatic processes. As a first step, the properties of a reduced, three component, baroclinic system are studied. The classical baroclinic stability criteria emerge as the properties of one of the three equilibria admitted, with the remaining two equilibria forming the attractor region for the observed weather activity. Passive tracer evolution in a baroclinic wave was studied. A model in which only constituents trapped within low atmospheric levels are considered, has been extended to include the possibility for fluxes into the upper levels of the atmosphere. The reported results for the lower levels achieved previously are shown to be qualitatively similar to those obtained by these new calculations in which the vertical flux constraint is removed. An extensive study of an 8-year record of global outgoing longwave radiation for the Northern Hemisphere reveals that blocking events exhibit only a weak signature of blocking highs, as measured by relatively low values of the ratio of the standard deviation to the mean value of the observed long wave outgoing radiation. Though present in many cases, the signature is not a strongly distinctive feature of the blocking episodes.

Saltzman, B.↗
DOE OSTI2025

In-situ irradiation of uranium carbide

Uranium carbide (UC) is a leading candidate fuel for Generation IV reactors due to its high uranium density and thermal conductivity. However, its irradiation performance—particularly gas bubble swelling and defect dynamics—remains poorly characterized. Using in-situ transmission electron microscopy (TEM), we irradiated UC with 300 keV Xe + and 1 MeV Kr 2+ ions at temperatures up to 900 °C to quantify swelling behavior and dislocation loop evolution. The swelling remained below 0.6 % across all temperatures, suggesting the dimensional stability of UC under irradiation at these temperatures. Dislocation loops grew faster in UC than in UO 2 or UN, correlating with its lower homologous temperature. Notably, nanograin structures emerged in thin regions of the lamellar, mirroring phenomena previously observed in UO 2 and ZrC. These results address critical knowledge gaps in the radiation tolerance of UC and provide insight into its suitability for advanced reactor systems.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Time-dependent experimental identification of inter-ELM microtearing modes in the tokamak edge on DIII-D

In a series of discharges on the DIII-D tokamak, fast vertical plasma jogs are used to induce current perturbations in the steep gradient region of the H-mode edge. These current perturbations directly influence the edge q profile, decoupling the resonant location and instability drive of pedestal-localized microtearing modes (MTMs.) By exploiting this effect, we develop and apply a new experimental technique to track the dynamical frequency evolution of MTMs in the pedestal region, providing a compelling validation of the MTM model. The frequency of potential MTMs is calculated as the Doppler-shifted electron diamagnetic frequency at rational q=m/n surfaces, showing remarkable agreement with chirped frequency behavior of n=3, 4 and 5 modes detected with fast magnetics. Data is collected throughout multiple ELM cycles in order to build robust statistics describing the time-dependent frequency evolution of MTMs, which can be explained by examining the recovery of pedestal gradients after an ELM event. MTMs have a dominant transport contribution in the electron thermal channel, so the presented results indicate that reduced models of pedestal transport must be electromagnetic in nature and constructed with accurate calculations of MTM stability; inclusion of this physics is essential for accurate predictions of the electron temperature pedestal profile. Supporting measurements of mode saturation, propagation direction and transport fingerprints are made to support the dynamic frequency determination, unambiguously and experimentally identifying MTMs in the pedestal region of DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Dislocation nano-hydrides in nickel: Nucleation, evolution and effects on dislocation behaviors

Nano-hydrides have been predicted to precipitate at the core of edge dislocations in the Ni-H system, a mechanism that may promote hydrogen embrittlement. However, nano-hydride nucleation, growth, and effects on dislocation behavior have seldom been explored. This work combines molecular dynamics grand canonical Monte Carlo (MD-GCMC) simulations and continuum modeling to uncover a wide range of phenomena linked to dislocation nano-hydrides. Simulations reveal that nano-hydrides can be stabilized at dislocation cores with all character angles, including screw segments, due to the hydrostatic stresses around the cores of the Shockley partials. Nano-hydride nucleation takes place in these regions, and growth is dictated by the character angle θ of the perfect dislocation. The equilibrium stacking fault width d eq varies dynamically to increase the local hydrostatic stress field and facilitate the formation of the nano-hydride, forming a constriction-like feature and leading to three distinct behaviors: d eq decreases for θ > 30°, d eq remains unchanged for θ = 30°, and d eq increases for θ < 30°. Remote hydrostatic and Escaig stresses are also shown to influence the nucleation stage, implying stress concentrations such as those ahead of crack tips may facilitate nano-hydride precipitation. Moreover, we identify a new hydrogen-induced 60° dislocation reaction that emits a Shockley partial on a conjugate plane, with potential implications for twin nucleation. Testable predictions from this study are then used to reinterpret previous results from the literature. In conclusion, these findings provide a comprehensive framework to assess nano-hydride formation and evolution at dislocations in nickel and other face-centered cubic metals, with important implications to hydrogen embrittlement.

Dislocations↗
DOE OSTI2024

A variational phase-field framework for thermal softening and dynamic ductile fracture

A variational phase field model for dynamic ductile fracture is presented. Here, the model is designed for elasto-viscoplastic materials subjected to rapid deformations in which the effects of heat generation and material softening are dominant. The variational framework allows for the consistent inclusion of plastic dissipation in the heat equation as well as thermal softening. It employs a coalescence function to degrade fracture energy during regimes of high plastic flow. A variationally consistent form of the Johnson–Cook model is developed for use with the framework. Results from various benchmark problems in dynamic ductile fracture are presented to demonstrate capabilities. In particular, the ability of the model to regularize shear band formation and subsequent damage evolution in two- and three-dimensional problems is demonstrated. Importantly, these phenomena are naturally captured through the underlying physics without the need for phenomenological criteria such as stability thresholds for the onset of shear band formation.

42 ENGINEERING↗
DOE OSTI2020

Radiation Damage in Materials—Helium Effects

Despite its scarcity in terrestrial life, helium effects on microstructure evolution and thermo-mechanical properties can have a significant impact on the operation and lifetime of applications, including: advanced structural steels in fast fission reactors, plasma facing and structural materials in fusion devices, spallation neutron target designs, energetic alpha emissions in actinides, helium precipitation in tritium-containing materials, and nuclear waste materials. The small size of a helium atom combined with its near insolubility in almost every solid makes the helium–solid interaction extremely complex over multiple length and time scales. This Special Issue, “Radiation Damage in Materials—Helium Effects”, contains review articles and full-length papers on new irradiation material research activities and novel material ideas using experimental and/or modeling approaches. These studies elucidate the interactions of helium with various extreme environments and tailored nanostructures, as well as their impact on microstructural evolution and material properties.

36 MATERIALS SCIENCE↗
NASA NTRS2009

Extending Newtonian Dynamics to Include Stochastic Processes

A paper presents further results of continuing research reported in several previous NASA Tech Briefs articles, the two most recent being Stochastic Representations of Chaos Using Terminal Attractors (NPO-41519), [Vol. 30, No. 5 (May 2006), page 57] and Physical Principle for Generation of Randomness (NPO-43822) [Vol. 33, No. 5 (May 2009), page 56]. This research focuses upon a mathematical formalism for describing post-instability motions of a dynamical system characterized by exponential divergences of trajectories leading to chaos (including turbulence as a form of chaos). The formalism involves fictitious control forces that couple the equations of motion of the system with a Liouville equation that describes the evolution of the probability density of errors in initial conditions. These stabilizing forces create a powerful terminal attractor in probability space that corresponds to occurrence of a target trajectory with probability one. The effect in configuration space (ordinary three-dimensional space as commonly perceived) is to suppress exponential divergences of neighboring trajectories without affecting the target trajectory. As a result, the post-instability motion is represented by a set of functions describing the evolution of such statistical quantities as expectations and higher moments, and this representation is stable.

Zak, Michail↗
DOE OSTI2025

Modeling and Analysis of Wind Turbine Wake Vortex Evolution Due to Time-Constant Spatial Variations in Atmospheric Flow

Modern utility-scale wind turbines are evolving toward larger, lighter, and more flexible designs to meet the growing demand for renewable energy while minimizing logistical costs. However, these advancements in lightweight design result in heightened aeroelastic sensitivity, leading to complex interactions which affect the rotor’s capacity to withstand aerodynamic loading and the cascading effects that manifest in the wake’s vortex-structure evolution under variable atmospheric conditions. In this paper, we analyze the influence of stream-wise fluctuating atmospheric flow conditions on wind turbines with large, flexible rotors through simulations of the National Rotor Testbed (NRT) turbine, located at Sandia National Labs’ Scaled Wind Farm Technology (SWiFT) facility in Lubbock, Texas. The Common Ordinary Differential Equation Framework (CODEF) modeling suite is used to simulate wind turbine aeroelastic oscillatory behavior and wind farm vortex–wake interactions for a range of conditions with spatially variant atmospheric flow. CODEF solutions for turbine operation in wind conditions featuring only one parameter fluctuation are compared to wind conditions with several wind parameter variations in combination. By isolating individual inflow variations and comparing them to multi-parameter scenarios, we determine the contributions of each atmospheric factor to rotor dynamics, wake evolution, and downstream wind farm interactions. The purpose of this paper is to analyze the effects of spatial variations in atmospheric flow on the topological evolution of wind turbine vortex wakes, which constitutes a gap in the current understanding of wind turbine wake dynamics. The insights gained from this study are particularly valuable for the development of wind farm control strategies aimed at mitigating the adverse effects of wake interactions, enhancing energy capture, and improving the overall stability of wind farm operations. With these insights, we aim to contribute to the development of modeling and simulation tools to optimize utility-scale wind power plants operating in diverse atmospheric environments.

Farrell, Alayna (ORCID:000000023555720X)↗
NASA NTRS1984

Supermassive monopole stars

In this paper, the evolution of a superheavy monopole-dominated universe is reexamined; in particular, the evolution of rotation-stabilized monopole-burning 'stars', balancing effects of radiation and annihilation are examined. In contrast to earlier results, it is found that this can lead to complete burning of all poles present in such an object within finite time. If monopoles can be brought within acceptable limits by dynamical processes, an inflationary epoch of the early universe need not be associated with grand unification.

Fry, J. N.↗
DOE OSTI2022

Thermal dynamics of P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 cathode materials for sodium ion batteries studied by in situ analysis

Cobalt-free layered Na 0.67 Ni 0.33 Mn 0.67 O 2 is an attractive cathode material for sodium ion batteries. The thermal stability of cathode materials is crucial to their practical applications. In the current work, we investigate structural and morphological evolution in P2-type Na 0.67 Ni 0.33 Mn 0.67 O 2 cathode materials during annealing via in situ synchrotron X-ray diffraction and transmission electron microscopy. Insights are obtained from the two complementary in situ characterizations (at different length scales) in term of the thermal stability of P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 cathode materials. Here, the results indicate that the hexagonal P2 phase remains unchanged during the heat treatment process, and thermally driven expansion/contraction of lattice parameters exhibit an anisotropic character in the a and c directions. In addition, interfaces/grain boundaries play an important role in the structural stability, which leads to the distinct morphological evolution between the polycrystalline and single-crystal particles.

25 ENERGY STORAGE↗
DOE OSTI2023

Scenario optimization for the tokamak ramp-down phase in RAPTOR: Part B. safe termination of DEMO plasmas

An optimized plasma current ramp-down strategy is critical for safe and fast termination of plasma discharges in a tokamak demonstration fusion reactor (DEMO), both in planned and emergency scenarios, avoiding plasma disruptions and excessive heat loads to the first wall. Plasma stability limits and machine-specific technical requirements constrain the stable envelope through which the plasma must be navigated. Large amounts of auxiliary heating are required throughout the ramp-down phase, to avoid a radiative collapse in the presence of intrinsic tungsten and seeded xenon impurities, as quantitatively estimated in this work. As the plasma current is reduced, the current density becomes increasingly peaked, reflected by a growing value of the internal inductance $\ell$ $i3$ , resulting in reduced controllability of the vertical position of the plasma. The feasibility of different plasma current ramp-down rates is tested by applying an automated optimization framework embedding the RAPTOR core transport solver. Optimal time traces for plasma current $I$ $p$ $(t)$ and plasma elongation $κ(t)$ are proposed, to satisfy an $I$ $p$ -dependent upper limit on the plasma internal inductance, as obtained from vertical stability studies using the CREATE-NL code, as well as a constraint on the time evolution of $q$ 95 , to avoid an ideal MHD mode. A negative current density near the plasma edge is observed in our simulations, even for the most conservative $I$ $p$ ramp-down rate, indicating significant transient dynamics due to a large resistive time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗