Search NASA⌕ Search

SEARCH · Search NASA

Results for “EARTH AXIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Earth Reflected Solar Radiation Incident upon an Arbitrarily Oriented Spinning Flat Plate

A general derivation is given for the earth reflected solar radiation input to a flat plate--a solar cell paddle, for example--which is spinning about an axis coincident with the axis of symmetry of the satellite to which it is affixed. The resulting equations are written for the general case so that arbitrary orientations of the spin axis with respect to the earth-satellite line and arbitrary orientations of the normal to the plate with respect to the spin axis can be treated. No attempt is made to perform the resulting integrations because of the complexity of the equations; nor is there any attempt to delineate the integration limits for the general case. However, the equations governing these limits are given. The appendixes contain: the results, in graphical form, of two representative examples; the general computer program for the calculation is given in Fortran notation; and the results of a calculation of the distribution of albedo energy on the proposed Echo II satellite. The value of the mean solar constant used is 1.395 times 10 (sup 4) ergs per centimeters-squared per second; the mean albedo of the earth is assumed to be 0.34; and the earth is assumed to be a diffuse reflector.

SOLAR RADIATION↗

Ranger Spacecraft

The thermal-control philosophy of the spacecraft currently under development by the Jet Propulsion Laboratory is design by passive means to maintain all components within the tolerances specified by cognizant engineers. Due to the complexity of the configurations, calculations are) of necessity, fairly generalized and final design is based upon tests in an environmental chamber. The Ranger series spacecraft is designed with a basic structure which is common to all models, with additional hardware to suit the individual mission. This basic structure of Rangers A-1 and A-2 is seen as the hexagonal instrument section, the erectable solar panels, the movable antenna, and the omniantenna. The Ranger A-1 and A-2 configuration is for engineering tests and space-exploration, with the scientific instrumentation isolation requirement dictating the spread-out design. The spacecraft stands 12 feet high, weighs 700 to 800 pounds, and has an internal power of 150 watts. Rangers A-3, A-4, and A-5 are designed to rough land a capsule on the moon. For these, a capsule and retrorocket replace the scientific instruments, occupying the space inside the tower structure. The spacecraft must survive many environments. Chronologically they are: 1) Folded configuration inside an aerodynamic shroud on the pad. 2) Thermal flux from shroud aerodynamically heated during boost phase. 3) Coasting up to 30 minutes attached to Agena stage after booster and shroud are separated. 4) Agena stage burning. 5) Coasting and tumbling after separation from Agena until it passes from earth's shadow. 6) Upon reaching sunlight, panels open and begin sun acquisition. 7) Antenna seeks earth after spacecraft locks onto sun. 8) Space phase- "steady state" with vehicle's vertical axis locked on sun, communicating with earth. The philosophy is to design for the sun-acquired mode, making allowances for the transient conditions.

Thostesen, T. O.↗

Evidence for flux ropes in the earth's magnetotail

Magnetic field reconnection is a fundamental process that occurs in the magnetotail during geomagnetic substorms. Some 2D reconnection models predict the formation of a plasmoid, or closed loop of magnetic field lines, in the noon-midnight meridional plane at those times. When the 3D magnetotail magnetic field is considered, it becomes clear that reconnection produces a flux rope with an axis transverse to the earth-sun line. Three signatures mark both 2D plasmoids and 3D flux ropes: (1) a bipolar magnetic field signature, (2) tailward flow of a hot plasma, and (3) convecting isotropic energetic particle distributions. Plasmoids and flux ropes may be distinguished by (4) the axial magnetic field that only flux ropes possess. All four signatures have been identified in near-earth, middle, and distant magnetotail observations, but their interpretation is disputed. Thus, the existence of magnetotail flux ropes remains a controversial subject.

Sibeck, David G.↗

Energetic particle bursts in the earth's magnetotail

The present review of observations of energetic particle bursts lead to the following conclusions: the time scales of acceleration range from less than 10 seconds to several tens of minutes; the energy extent of bursts ranges from less than 50 keV to 2 MeV; for impulsive highly anisotropic field-aligned bursts, inverse velocity dispersion has been observed; the source dimension along the x axis is less than 1 earth radius, and even as small as 2400 km; source movement is approximately 30 to 80 km/sec, while source size in the y direction can reach several earth radii; particle anisotropies are primarily directed earthward or tailward with a strong dawn-dusk component for protons.

Krimigis, S. M.↗

Lander Locations, Mars Physical Ephemeris, and Solar System Parameters: Determination from Viking Lander Tracking Data

Radio tracking data from the Viking landers have been analyzed to determine the parameters of the Mars physical ephemeris, the radii of Mars at the landing sites, and the lander locations. The orientation of the Mars rotation axis, referred to the 1950.0 earth mean equator, equinox, and epoch, was determined to be 317.340+/-0.003 degrees right ascension and 52.710+/-0.002degrees declination. The planet's rotation period was determined to be 24 h, 37 min, 22.663+/-0.002 s. Analyses indicate that the determination of the motions of the Mars rotation axis will require additional tracking data. The Mars radii at the sites of landers 1 and 2 are 3389.38+/-0.06 km and 3381.91+/-0.08 km, respectively. The areocentric location of lander 1 is 22.272+/-0.002 degrees N, 47.94+/-0.2 degrees W. The lander 2 location is 47.670+/-0.002 degrees N, 225.71+/-0.2 degrees W. The areocentric right ascensions of the landers are determined to be 277.314+/-0.002 degrees for lander 1 and 99.546+/-0.002degrees for lander 2 at 0000 hours, January 1, 1977 (Julian date 2443144.57). Possible determinations of relativity parameters, solar oblateness, asteroid mass, and variations of the universal gravitational constant, from their effects on the planetary motions, will require the additional tracking data of the Viking extended mission.

Mayo, A. P.↗

Past orientation of the lunar spin axis

The orientation of the lunar spin axis is traced from the early history of the earth-moon system to the present day. Tides raised on the earth by the moon have caused an expansion of the lunar orbit. Tides raised on the moon by the earth have de-spun the moon to synchronous rotation and driven its spin axis to a Cassini state - that is, in a coprecessing configuration, coplanar with the lunar orbit normal and the normal to the Laplacian plane (which is at present coincident with the normal to the ecliptic). This combination of events has resulted in a complex history for the lunar spin axis. For much of the period during which its orbital semimajor axis expanded between 30 and 40 earth radii, the obliquity of the moon was of order 25 to 50 deg. In fact, for a brief period the obliquity periodically attained a value as high as 77 deg; that is, the spin axis of the moon was only 13 deg from lying in its orbit plane.

Ward, W. R.↗

An extended Kalman filter for spinning spacecraft attitude estimation

An extended Kalman filter for real-time ground attitude estimation of a gyro-less spinning spacecraft was developed and tested. The filter state vector includes the angular momentum direction, phase angle, inertial nutation angle, and inertial and body nutation rates. The filter solves for the nutating three-axis attitude and accounts for effects due to principle axes offset from the body axes. The attitude is propagated using the kinematics of a rigid body symmetric about the principle spin axis; disturbance torques are assumed to be small. Filter updates consist only of the measured angles between celestial objects (Sun, Earth, etc.) and the nominal spin axis, and the times these angles were measured. Both simulated data and real data from the Dynamics Explorer -A (DE-A) spacecraft were used to test the filter; the results are presented. Convergence was achieved rapidly from a wide range of a priori state estimates, and sub-degree accuracy was attained. Systematic errors affecting the solution accuracy are discussed, as are the results of an attempt to solve for sensor measurement angle biases in the state vector.

Baker, David F.↗

Single-Axis Acoustic Levitator With Rotation Control

Rotation-control equipment simplified. Acoustic levitator with rotation control handles liquid and solid specimens as dense as steel in both low gravity and normal Earth gravity. Levitator is single-axis type.

Trinh, E. H.↗

Ocean tidal excitation of polar motion

An investigation was conducted to ascertain the response of the rotational motion of the earth to forcing functions produced by the water mass redistribution due to the ocean tides. In particular, the components of displacement of the rotation axis at the surface of the Earth were obtained. The investigation also addressed the larger question concerning the possibility of excitation of the Chandler wobble of the earth. In general, the results show the existence of a polar wobble as a response to each of the components of the ocean tides. The magnitude of the polar displacement depends on two factors: the amplitude of the tidal component and its period. The maximum periodic contributions are: the Doodson's component number 055.565 with a period of 18.613 years and 50 cm of polar displacement, the annual component 056.544 with 37 cm of polar displacement and the semi-annual 057.555 with 32 cm. The tidal components with daily and semi-daily periods yield very small polar displacements of the order of 0.01 cm. The combined effect of all the periodic components can yield as much as 90 cm of pole displacements. The changes produced by the ocean tides in the products of inertia are periodic and regular, therefore, they cannot be the source of excitation of the Chandler wobble.

Sanchez, B. V.↗

Comments on the long-term stability of the earth's obliquity

Continued tidal evolution of the earth-moon system will lengthen the day and expand the lunar orbit. Both of these changes increase the present 26,000-year equinoctial precession period. In less than two billion years, this period will become comparable to the approximately 49,000- and 69,000-year periods of important terms describing the precession of the earth's orbit plane due to planetary perturbations. These events occur when the lunar orbital semimajor axis drifts past approximately 66.5 and 68.0 earth radii, respectively, and will be accompanied by large oscillations of the obliquity and severe climatic alterations. The current rate of lunar recession implies that these resonances should have been encountered already, had present conditions been the norm throughout geologic time.

Ward, W. R.↗

Crucial Role of Thermal Gradients in MMS Fluxgate In-Flight Calibration

To meet the science goals of the Magnetospheric Multiscale (MMS) mission, the Fluxgate Magnetometer (FGM) must measure the ambient magnetic field with an accuracy of 0.1 nT. On a typical MMS orbit, the offsets (or zero levels) of the 3-axis FGM can vary by ~0.5 nT (exclusive of periods in Earth shadow). Previous studies have shown that these variations can be characterized as functions of sensor temperature, TS, and can thus be corrected to within 0.2 nT in the spin plane using in-flight calibration techniques (Bromund, et al., 2016, https://ntrs.nasa.gov/citations/20160014711). In that presentation, we noted two significant observations: A distinct function of TS must be used to characterize offsets during shadow: offsets at a given TScan differ by as much as 2 nT in shadow vs sunlight. Offsets change after maneuvers, without a commensurate change in TS . These changes can be as large as 2 nT. We now note a third, related observation: Offsets increase with proximity to the earth even when TS is constant, resulting in variations of ~0.2 nT at 4-5 Earth radii (RE) These effects are evidence that offsets are a multivariate function of TS and another factor, namely: thermal gradients. Due to the spacecraft spin, the Earth and the Sun each provide a relatively constant thermal input onto one instrument face while the opposite face remains in shadow, thus giving rise to thermal gradients. The thermal gradient depend on the orientation of the spin axis relative to the Earth or Sun. We observe that offsets vary by as much as 0.17 nT/degree as a function of the tilt of the spin axis towards the Sun. Thermal input from the Earth is dominated by Outgoing Longwave Radiation (OLR). Due to the proximity to Earth, the inverse proportion of the distance squared is a significant factor in the thermal gradient attributed to Earth OLR. We find that offsets can be corrected to <0.05 nT accuracy near perigee when accounting for these factors using empirically determined constants of proportionality that account for differences in emissivity of the top and bottom faces of the sensor to OLR (as well as other thermal effects). The changes in offset associated with thermal gradient are of the same order of magnitude as effects that were formerly attributed to sensor temperature alone, and thus both parameters are necessary to characterize the FGM offsets.

Kenneth R Bromund↗

The warped neutral sheet and plasma sheet in the near-earth geomagnetic tail

An analysis of ISEE 2 plasma and magnetic field data indicates that the plasma sheet and neutral sheet in the near-earth magnetotail are warped in such a manner that in summer (winter) the neutral sheet rises above (dips below) the solar magnetospheric equatorial plane near the center of the tail, but dips below (rises above) the equatorial plane along the tail flanks. In the near tail, the neutral sheet crosses the equatorial plane at about 12 earth radii from the aberrated X axis, considerably closer to the center of the tail than has been inferred from data obtained farther downstream. This increase in the warp with decreasing distance from the earth is consistent with theoretical predictions. In the near tail, the warp is sufficiently strong when the dipole tilt angle is large that even in quiet times the upper or lower edge of the plasma sheet can be found close to the solar magnetospheric equatorial plane along the tail flanks. The seasonal dependence of the warp can produce certain dawn-dusk asymmetries in satellite data which are more apparent than real.

Gosling, J. T.↗

The magnetic field of Mercury

The Mariner 10 spacecraft encountered Mercury three times in 1974-1975. The first and third encounters provided detailed observations of a well-developed detached bow shock wave which results from the interaction of the solar wind. The planet possesses a global magnetic field and a modest magnetosphere, which deflects the solar wind. The field is approximately dipolar, with orientation in the same sense as earth, tilted 12 deg from the rotation axis. The magnetic moment corresponds to an undistorted equatorial field intensity of 350 gammas, approximately 1% of earth's. The field, while unequivocally intrinsic to the planet, may be due to remanent magnetization acquired from an extinct dynamo or a primordial magnetic field or due to a presently active dynamo. The latter possibility appears more plausible at present. In any case, the existence of the magnetic field provides very strong evidence of a mature differentiated planetary interior with a large core (core radius about 0.7 Mercury radius) and a record of the history of planetary formation in the magnetization of the crustal rocks.

Ness, N. F.↗

Far-infrared observations of celestial objects by balloon-borne telescope.

The instrument described is an f/5 Newtonian telescope with a parabolic pyrex primary mirror. The telescope tube is 1.5 m long. A 61 cm baffle is included to provide shielding from off-axis objects such as the earth, the moon, and the sun. An outline of the regions covered by sky surveys in June 1970 and in April 1971 is presented. Approximately 750 square degrees of the sky have been covered, including 100 degrees along the galactic plane.

Hoffmann, W. F.↗

Analytic investigation of the AEM-A/HCMM attitude control system performance

The Heat Capacity Mapping Mission (HCMM), scheduled for launch in 1978, will be three-axis stabilized relative to the earth in a 600-kilometer altitude, polar orbit. The autonomous attitude control system consists of three torquing coils and a momentum wheel driven in response to error signals computed from data received from an infrared horizon sensor and a magnetometer. This paper presents a simple model of the attitude dynamics and derives the equations that determine the stability of the system during both attitude acquisition (acquisition-mode) and mission operations (mission-mode). Modifications to the proposed mission-mode control laws which speed the system's response to transient attitude errors and reduce the steady-state attitude errors are suggested. Numerical simulations are performed to validate the results obtained with the simple model.

Lerner, G. M.↗

Attitude determination techniques for Nimbus 6 and Nimbus G

Techniques for measuring attitude deviations in the Nimbus 6 and Nimbus G 3-axis stabilized, zero-momentum, earth observation satellites are presented. The on-orbit telemetered data include scanner roll and pitch error signals, an illuminated DSAS which can read the azimuth and elevation of the sunline when the spacecraft is not in the umbra, the signal from the single gyro in the RMP, and the momenta of the reaction wheels. Mathematical methods for interpreting the measured data are described with attention to filter equations, especially the Kalman filter because of its ability to eliminate high frequency noise.

Das, A.↗