Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTROCHEMICAL OXIDATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Investigation of the Unusual Ability of the [FeFe] Hydrogenase from Clostridium beijerinckii to Access an O 2 -Protected State

[FeFe] hydrogenases are enzymes capable of producing and oxidizing H 2 at staggering submillisecond time scales. A major limitation in applying these enzymes for industrial hydrogen production is their irreversible inactivation by oxygen. Recently, an [FeFe] hydrogenase from Clostridium beijerinckii (CbHydA1) was reported to regain its catalytic activity after exposure to oxygen. In this report, we have determined that artificially matured CbHydA1 is indeed oxygen tolerant in the absence of reducing agents and sulfides by means of reaching an O 2 -protected state (Hinact). We were also able to generate the H inact state anaerobically via both chemical and electrochemical oxidation. We use a combination of spectroscopy, electrochemistry, and density functional theory (DFT) to uncover intrinsic properties of the active center of CbHydA1, leading to its unprecedented oxygen tolerance. We have observed that reversible, low-potential oxidation of the active center leads to the protection against O 2 -induced degradation. The transition between the active oxidized state (H ox ) and the H inact state appears to proceed without any detectable intermediates. We found that the Hinact state is stable for more than 40 h in air, highlighting the remarkable resilience of CbHydA1 to oxygen. Using a combination of DFT and FTIR, we also provide a hypothesis for the chemical identity of the H inact state. These results demonstrate that CbHydA1 has remarkable stability in the presence of oxygen, which will drive future efforts to engineer more robust catalysts for biofuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanism of Contrasting Ionic Conductivities in Li 2 ZrCl 6 via I and Br Substitution

Understanding the complex structural and chemical factors that influence ionic conduction mechanisms is paramount for developing advanced inorganic superionic conductors in all‐solid‐state batteries, particularly halide solid electrolytes with excellent electrochemical oxidative stability and mechanical sinterability. Herein, contrasting ionic conduction behaviors in I − and Br − substituted Li 2 ZrCl 6 are revealed by combining experimental structural analyses and theoretical calculations. The inter‐slab distance along the c ‐axis, which varies with the anion substitution and M2‐M3 site disorder, is a key factor for opening the ab ‐plane conduction and facilitating the overall Li + conduction. Increased M3 site occupancy generally leads to contracted inter‐slab distance. The substantial increase in Li + conductivity upon I substitution (from 0.40 to 0.91 mS cm −1 ) originates from a sufficiently expanded lattice volume owing to its large ionic radii (I − = 2.20 Å), particularly inter‐slab distance that facilitates the ab intra‐plane Li + conduction, which also benefits from decreased M2‐M3 disorder. In contrast, Br (Br − = 1.96 Å) substitution results in insufficiently expanded Li + channels, which, exacerbated by increased M2‐M3 disorder, leads to degradation in Li + conductivity. Implementing I − substituted Li 2 ZrCl 6 resulted in superior electrochemical performance in LiCoO 2 ||Li‐In cells compared to those with an unsubstituted catholyte.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Plasma-Initiated Graft Polymerization of Acrylic Acid onto Fluorine-Doped Tin Oxide as a Platform for Immobilization of Water-Oxidation Catalysts

The discovery of new and versatile strategies for the immobilization of molecular water-oxidation catalysts (WOCs) is crucial for developing clean energy conversion devices [e.g., (photo)electrocatalytic cells for water splitting]. The traditional approach for surface attachment to transparent conductive oxides [e.g., fluorine doped tin oxide (FTO)] is via synthetic modification of the ligand architecture to incorporate functional groups such as carboxylic acids (-COOH) or phosphonates (-PO 3 H 2 ) prior to immobilization. However, challenges arising from desorption and the cumbersome derivatizations steps have limited the scope and applications of surface-bound WOCs. Herein, we report the successful immobilization of underivatized Ru(II)-based WOCs (Ru–Cat1 = [Ru(tpy) (bpy) (H 2 O)] 2+ (tpy = 2,2':6'2"–terpyridine and bpy = 2,2;-bipyridine) and Ru–Cat2 = [Ru(Mebimpy) (bpy) (H 2 O)] 2+ (Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) pyridine)) and the Ru(II) polypyridyl chromophore Ru–C3 = [Ru(bpy) 3 ] 2+ onto a FTO plasma-grafted poly(acrylic acid) surface (PAA|FTO). Various characterization techniques such as attenuated total reflectance Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and cyclic voltammetry measurements provide evidence for the plasma-induced grafted PAA|FTO film and immobilization. Surface stability and electrocatalytic properties of these new hybrid composite films upon cycling were investigated at different pH values. Immobilized Ru–Cat1 and Ru–Cat2 onto PAA|FTO displayed pH-dependent (RuIII/RuII) couples and onset potentials indicative of PCET (proton-coupled electron transfer) reactions. Based on cyclic voltammetry results and spectroscopic monitoring, the immobilized WOCs Ru–Cat1 and Ru–Cat2 exhibited a higher surface stability in neutral aqueous solutions relative to Ru–C3 upon electrochemical oxidation. Furthermore, we attribute the surface PCET and stability to the presence of a water ligand in the coordination sphere of immobilized Ru–Cat1 and Ru–Cat2 which can H-bond with negatively charged carboxylate groups of the cross-linked PAA brushes. Our findings demonstrate that the plasma-grafted polymeric network onto FTO offers a versatile platform to directly anchor unmodified homogeneous WOCs or chromophores for potential applications in solar-to-fuel energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Low-gravity electrodeposition and growth of polymer thin films with large third-order optical nonlinearities by electrochemical processes for devices: Thiophene-based polymers

It has been proposed that NLO thin film properties may be improved by low-gravity processing. Strong candidates for NLO thin film applications are the polythiophenes. Polymeric thiophenes are attractive materials due to their ease of preparation, stability, and high X(exp 3). A simple and convenient method for preparation of polythiophenes is electrochemical oxidation. We will apply some of our experience and lessons learned in low-gravity metal, metal/cermet electrode position to improve the quality of polythiophene(s) thin films. In low gravity electrode position of Ni at a high rate on an Au substrate often results in the production of an x-ray non diffracting surface. Cobalt metal deposition does not give this result nor does Ni when deposited similarly on a glassy carbon substrate. Co/Ni alloy composition produced during electrode position is strongly dependent upon the amount of convection. Code position of neutral inert cermets with metals is influenced significantly by the presence of gravity and the size of the cermets. Tracks left in the 1-g surfaces by unsuccessful particle occlusion indicate suspension of the large particles is not the only reason for poor volume percentages of the larger particles in the deposits. All size particles are more homogeneously distributed in the deposits in low-gravity electrocodeposition than in 1-g. Low gravity gives larger volume percentages for the larger particles in the deposits, while 1-g gives larger volume percentages for the smaller particles. Intermediate size particles give mixed results. The experimental cells were constructed with flat electrode end plates such that 1-g bench reference electrode positions could be carried out at various orientations with respect to gravity. A series of bench studies using similar designed cells are suggested so that convection modification can be applied to electrochemical thin film preparation. Convection effects can then be coupled with other parameter variations in current, temperature, concentration, solvent, electrolyte, and anode substrates to optimize the properties of NLO thin films before resorting to low-gravity processing.

Penn, Benjamin G.↗
DOE OSTI2023

Challenges in practical button cell testing for hydrogen production from high temperature electrolysis of water

High temperature electrolysis of water using solid oxide electrochemical cells (SOEC) is a promising technology for hydrogen production with high energy efficiency and may promote decarbonization when coupled with renewable energy sources and excess heat from nuclear reactors. Over the past several decades there have been extensive scientific and engineering studies on cell materials and degradation behaviors that have greatly improved current density, decreased total resistance, and lowered degradation rates. Although the technology is now at a near-commercial level, maintaining consistency in cell testing and minimizing variance in practical testing environments is an often overlooked but crucial topic. To promote high quality data collection, testing procedures and balance of plant component details are extremely important to consider. This work discusses some key factors affecting the reproducibility of practical SOEC testing on the button cell level, namely, current collection layers, cell sealing procedures, the reliability of steam and hydrogen delivery systems, cell testing fixture design, and reduction procedures. To provide a baseline and a level of standardization for the SOEC community, this work also discloses details of the standard operating procedure and techniques adopted for o-SOEC testing at Idaho National Laboratory (INL).

08 HYDROGEN↗
DOE OSTI2023

A Dual Anion Chemistry-Based Superionic Glass Enabling Long-Cycling All-Solid-State Sodium-Ion Batteries

Glassy Na-ion solid-state electrolytes (GNSSEs) are an important group of amorphous SSEs. However, the insufficient ionic conductivity of state-of-the-art GNSSEs at room temperature lessens their promise in the development of all-solid-state Na-ion batteries (ASSNIBs) with high energy density and improved safety. Here we report the discovery of a new sodium superionic glass, 0.5Na 2 O 2 -TaCl 5 (NTOC), based on dual-anion sublattice of oxychlorides. The unique local structures with abundant bridging and non-bridging oxygen atoms contributes to a highly disordered Na-ion distribution as well as low Na + migration barrier within NTOC, enabling an ultrahigh ionic conductivity of 4.62 mS cm −1 at 25 °C (more than 20 times higher than those of previously reported GNSSEs). Moreover, the excellent formability of glassy NTOC electrolyte and its high electrochemical oxidative stability ensure a favourable electrolyte-electrode interface, contributing to superior cycling stability of ASSNIBs for over 500 cycles at room temperature. The discovery of glassy NTOC electrolyte would reignite research enthusiasm in superionic glassy SSEs based on multi-anion chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Zinc(II) Monomeric, Dimeric, and Trimeric Photosensitizers with Microsecond‐Lived Intra‐ligand Charge Transfer Excited States Investigated through Time‐Resolved Optical and X‐Ray Spectroscopy

Zn II photosensitizers relative to Cu I complexes have received less attention due to their energetically higher metal‐to‐ligand charge transfer states. Three Zn II complexes, namely a Monomer, a bimetallic helicate, and a trimetallic helicate, bearing phenanthroline ligands are hereby studied through time‐resolved X‐ray absorption (tr‐XAS) and femto‐microsecond optical transient absorption spectroscopy (OTA). The formation of intraligand singlet charge transfer ( I ILCT) excited states is achieved within femtoseconds, followed by intersystem crossing (ISC) in nanoseconds to generate microsecond‐lived triplet ( 3 ILCT) states. Femtosecond OTA shows that the 1 ILCT states in the Monomer, Dimer, and Trimer occur within 235 fs, 683 fs, and 730 fs, respectively, while nano‐microsecond OTA and tr‐XAS show their 3 ILCT states to decay within 1.00 µs, 1.48 µs, and 1.51 µs. The ISC from the 1 ILCT to the 3 ILCT state for the Trimer is 42.8 ns compared to the Monomer and Dimer with ISC rates of less than 13 ns. These differences arise due to the stabilization by π‐π and CH‐π noncovalent interactions of the phenanthroline ligands. The dihedral and torsional angles indicate stronger ligand strains in the excited states of the Dimer and Trimer versus the Monomer. DFT calculations for the electrochemical oxidation potentials further highlight their capability in inducing photoredox processes.

earth-abundant Zn-based photosensitizers↗
DOE OSTI2024

Electrochemical sulfate production from sulfide-containing wastewaters and integration with electrochemical nitrogen recovery

Electrochemical methods can help manage sulfide in wastewater, which poses environmental and health concerns due to its toxicity, malodor, and corrosiveness. In addition, sulfur could be recovered as fertilizer and commodity chemicals from sulfide-containing wastewaters. Wastewater characteristics vary widely among wastewaters; however, it remains unclear how these characteristics affect electrochemical sulfate production. Here, in this study, we evaluated how four characteristics of influent wastewaters (electrolyte pH, composition, sulfide concentration, and buffer strength) affect sulfide removal (sulfide removal rate, sulfide removal efficiency) and sulfate production metrics (sulfate production rate, sulfate production selectivity). We identified that electrolyte pH (3 × difference, i.e., 25.1 to 84.9 μM h –1 in average removal rate within the studied pH range) and sulfide concentration (16 × difference, i.e., 82.1 to 1347.2 μM h –1 in average removal rate) were the most influential factors for electrochemical sulfide removal. Sulfate production was most sensitive to buffer strength (6 × difference, i.e., 4.4 to 27.4 μM h –1 in average production rate) and insensitive to electrolyte composition. Together, these results provide recommendations for the design of wastewater treatment trains and the feasibility of applying electrochemical methods to varying sulfide-containing wastewaters. In addition, we investigated a simultaneous multi-nutrient (sulfur and nitrogen) process that leverages electrochemical stripping to further enhance the versatility and compatibility of electrochemical nutrient recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Recent development of thermoelectric nanofibers and their composites

This review deals with the recent development of thermoelectric (TE) nanofibers and their composite materials. Typical processing and manufacturing technologies for preparing nanofibers are introduced. Specifically, electrospinning, electrochemical oxidation, and liquid phase chemical deposition approaches are discussed. Various kinds of TE nanofibers are introduced one-by-one. Several important inorganic and organic nanofibers including carbon-based nanofibers, conducting polymer-based nanofibers, and transition metal oxide-based nanofibers with significant thermoelectric responses are shown. Thermoelectric properties of some important nanofibers are compared. The applications of TE nanofibers for energy conversion, thermal imaging and temperature sensing are illustrated. Perspectives and concluding remarks are presented.

42 ENGINEERING↗
DOE OSTI2022

Overcoming Degradation Pathways to Achieve Stable Blue Perovskite Light-Emitting Diodes

Mixed halide (Br/Cl) perovskite nanocrystals (NCs) that represent an advanced blue emitter commonly suffer from spectral instability and poor lifespan; notably, the lack of understanding of the failure mechanisms of these devices has restricted the future progress. Here, we determine that the degradation of CsPbBr x Cl 3– x NCs containing blue light-emitting diodes (LEDs) is due to the combination of two effects. Cl – drift among adjoining NCs under an electric field is found to induce a Cl-deficient material region in multiple NC layers, which dominates the unstable electroluminescence and causes fast degradation in the corresponding devices. In comparison, the monolayer NC devices that feature restricted anion drift pathways exhibit better operational stability; however, excess hole injection is demonstrated to induce irreversible chlorine loss in NCs. Such a process that largely arises from electrochemical oxidation of Cl – initiates a mild device failure in operation of tens of minutes. Through revealing these mechanisms, we modulate the devices’ construction and operational conditions to achieve a longer lifespan.

14 SOLAR ENERGY↗
DOE OSTI2025

Performance-Limiting Factors of Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers

Here, the move toward nonfluorinated hydrocarbon ionomers for fuel cells and electrolyzers is driven by potential restrictions on polyfluoroalkyl substances such as Nafion. This study examines the key limitations of hydrocarbon ionomers through half- and single-cell experiments with model hydrocarbon ionomers. Half-cell tests reveal three major performance barriers: undesirable adsorption, electrochemical oxidation, and low gas permeability. Competitive sulfate adsorption helps counteract ionomer adsorption and oxidation. These findings align with single-cell performance data, which further reveal additional oxygen mass transport limitations likely caused by localized electrode flooding. Together, these findings offer valuable insights to guide the development of high-performance, fluorine-free hydrocarbon ionomers for next-generation fuel cells and electrolyzers.

Choi, Jong-Ho [Los Alamos National Laboratory (LAN↗
DOE OSTI2025

Chemically Generated Liquid Sulfur Droplets at Room and Subzero Temperatures

The liquid phase of sulfur has been observed at room temperature, resulting from the electrochemical oxidation of polysulfides, a process occurring on the electrodes and influenced by the electrode materials. However, such electrode-dependent behavior of liquid sulfur has constrained its use in battery applications, driving research for alternative processes. This paper introduces an approach to generating liquid sulfur at both room and subzero temperatures through chemical reactions independent of the substrate material. We demonstrate that using a redox mediator, polysulfides can be chemically oxidized into liquid sulfur droplets in the electrolyte close to but away from the electrode. This pathway can generate liquid sulfur at room and subzero temperatures of −15 °C, 130 °C below sulfur’s melting temperature (115 °C). The chemically generated liquid sulfur further enriches the lithium–sulfur-electrolyte material systems, potentially creating opportunities for high-energy lithium–sulfur and other metal–sulfur batteries.

liquid sulfur↗
DOE OSTI2025

Advancing Mn-Based Li-Ion Battery Cathodes via a Partially Cation-Disordered Zigzag-Type Li–Nb–Mn–O Framework

Mn-based Li-ion battery cathodes encompass a great variety of materials structures. Decades of research effort have proven that developing a Mn-based structure featuring a high redox activity, stable cycling, and cost-effectiveness is a longstanding challenge. Motivated by such a need and inspired by the structural diversity of Mn-based cathodes, we develop a partially cation-disordered lithium niobium manganese oxide with a zigzag structure, filling the knowledge gap between zigzag-ordered and fully disordered Li-Mn-based oxides. Electrochemically, the partially disordered cathode greatly unlocks the redox activity of the zigzag lattice and maintains the cycling stability. Mechanism-wise, the partial disordering suppresses the disproportionation reaction of Mn(III) and facilitates a disordered λ-MnO 2 -tetragonal cation-disordered rock salt structural transformation. Furthermore, the work suggests the substantial opportunity of using partial disordering as the key strategy to revive locked-up redox activities and realize new energy storage mechanisms, for the pursuit of high-performance cost-effective battery materials.

25 ENERGY STORAGE↗
DOE OSTI2020

In situ electrosynthesis of anthraquinone electrolytes in aqueous flow batteries

In this work, we demonstrate the electrochemical oxidation of an anthracene derivative to a redox-active anthraquinone at room temperature in a flow cell without the use of hazardous oxidants or noble metal catalysts. The anthraquinone, generated in situ, was used as the active species in a flow battery electrolyte without further modification or purification. This potentially scalable, safe, green, and economical electrosynthetic method is also applied to another anthracene-based derivative and may be extended to other redox-active aromatics.

25 ENERGY STORAGE↗
DOE OSTI2020

Effects of surface chemical potentials on cation segregation

Surface cation segregation on perovskite-type electrodes is one of the major issues limiting the durability of high-temperature solid-oxide electrochemical cells, and this process is strongly dependent on temperature, the external gas-environment, and impurities in air, such as CO 2 . Here cation segregation on La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) is systematically evaluated under a set of chemical potentials to determine the origin of surface segregation and the dominant factors that govern the segregation process. Temperature is the main driving force for surface strontium segregation as the thermodynamic stability of each phase varies, and the SrO particles appear primarily in a specific operating window. In addition to the required thermal energy, the presence of gaseous oxygen-containing molecules as reactants help drive the precipitation of SrO. Oxygen partial pressure (pO 2 ) controls the defect chemistry of LSCF, leading to promotion or suppression of surface segregation. The presence of CO 2 promotes the nucleation process and suppresses the surface migration step, significantly altering the surface morphology. We also show that A-site deficiency can limit the SrO segregation in certain conditions but shows no effect in others. This study reveals the impact of gas–solid interactions on surface segregation and highlights the subtle relationship between multiple segregation driving forces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A mini-review on proton conduction of BaZrO 3 -based perovskite electrolytes

Abstract Proton conducting ceramics show promise in fuel cells, electrolyzers, permeation membranes, sensor applications, and membrane reactors. Among several types of materials that exhibit proton conduction, perovskite oxides show high proton conductivity at intermediate temperatures, presenting potential benefits for long-term use and lower costs for energy applications. Doped barium zirconate, BaZrO 3 , is a material that has shown high proton conductivity with encouraging chemical stability. Therefore, it is considered a promising material especially for proton-conducting solid oxide electrochemical cells. Although the proton conduction of doped BaZrO 3 has been extensively characterized, the specific phenomena behind its proton conduction are not fully understood. Only recently have specialized techniques and computational tools begun to elucidate the phenomena that determine the conduction properties of the material. In this mini review, an evaluation of the factors affecting the proton conductivity of doped BaZrO 3 perovskites and the phenomena governing variations in proton concentration and mobility are presented. Special attention is given to proton interactions with dopants and their resulting effect on hydration and transport properties. Technical strategies are provided to give some guidance on the development of protonic ceramics in energy conversion applications.

08 HYDROGEN↗