Experiments on the production and extinction of the 2s state of the hydrogen atom.
Production and extinction of 2s state of hydrogen atom during passage of initial proton beam through molecular hydrogen
IONIZATION CROSS SECTION↗
SEARCH · Search NASA
Results for “ELECTRON CAPTURE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Neutrino astrophysics, I
Detection of neutrino emission by sun from nuclear reactions
ELECTRON CAPTURE↗
Impurity photovoltaic effect in cadmium sulfide.
Impurity photovoltaic effect in cadmium sulfide, noting radiative enhancement of spectral response upon illumination with green light
CADMIUM SULFIDE↗
On the critical binding of an electron by an electric dipole.
Critical binding of electron by electric dipole, noting value of dipole moment
ELECTRON CAPTURE↗
Charge transfer in the classical binary- encounter approximation.
Charge transfer prediction by classical binary- encounter theory approximation and quantum mechanical approximation
CHARGE TRANSFER↗
Interlaboratory calibration of atmospheric nitrous oxide measurements
Samples representative of Northern Hemispheric conditions in mid-1976 were analyzed by 11 laboratories to resolve the question of the absolute tropospheric concentration of nitrous oxide. The laboratories all employed electron capture-gas chromatography for the analysis. After exclusion of one anomalously low determination, the calibration results showed a mean concentration of 323.5 + or - 8.7 ppb v/v nitrous oxide.
Rasmussen, R. A.↗
Global atmospheric distribution and trend of methylchloroform /CH3CCl3/
Results of global measurements of the concentration of atmospheric methylchloroform, a man-made gas with potentially harmful environmental consequences, performed over a two-year period are presented. Samples were collected weekly at Pt. Barrow and Poker Flats, Alaska, Cape Meares, Oregon, Cape Kumakahi, Hawaii, Samoa, and Cape Grim, Tasmania, and yearly at the South Pole, and methylchloroform concentrations were determined by electron capture-gas chromatographic techniques. A latitudinal profile of CH3CCl3 concentrations derived from the data exhibits a bump at high northern latitudes, where most of the sources are located. Average concentrations calculated for the Northern and Southern Hemispheres showed a rise in global concentrations at a rate of 6.7 + or - 2.0%/year for the period from January 1979 to January 1981, with concentrations rising more slowly in 1980 than in 1979. These yearly increases are also smaller than earlier rates of increase, explainable by a reduction in the rate of emission increase, and are consistent with an atmospheric lifetime of between 6 and 10 years.
Rasmussen, R. A.↗
Recombination of H3(+) and D3(+) Ions in a Flowing Afterglow Plasma
The analysis of flowing afterglow plasmas containing H3(+) or D3(+) ions indicates that the de-ionization of such plasmas does not occur by simple dissociative recombination of ions with electrons. An alternative model of de-ionization is proposed in which electrons are captured into H3(**) auto-ionization Rydberg states that are stabilized by collisional mixing of the Rydberg molecules' angular momenta. The proposed mechanism would enable de-ionization to occur without the need for dissociative recombination by the mechanisms of potential-surface crossings.
Gougousi, T.↗
Responses of the Jovian Atmosphere to Cometary Particles and Photon Impacts
Detailed calculations were performed of the deposition of energetic oxygen ions into the atmosphere of Jupiter. A Monte Carlo simulation was used. Similar processes occur in other astrophysical environments to which our methods can be applied. In particular Cravens has suggested that the X-ray emissions seen from comets are due to transitions from excited states following capture of electrons by solar wind ions colliding with the atmosphere of the comet. Alternative proposals have been advanced for the source of the cometary X-rays. We have carried out a study of the spectra and have shown that with the spectral resolution of about 20 eV the different excitation mechanisms can be distinguished. The response of the two components of the solar wind predict a spectrum that is consistent with the cometary observations. X-rays from the comets arise from the slow solar wind.
Dalgarno, Alex↗
Pulse Detonation Rocket MHD Power Experiment
A pulse detonation research engine (MSFC (Marshall Space Flight Center) Model PDRE (Pulse Detonation Rocket Engine) G-2) has been developed for the purpose of examining integrated propulsion and magnetohydrodynamic power generation applications. The engine is based on a rectangular cross-section tube coupled to a converging-diverging nozzle, which is in turn attached to a segmented Faraday channel. As part of the shakedown testing activity, the pressure wave was interrogated along the length of the engine while running on hydrogen/oxygen propellants. Rapid transition to detonation wave propagation was insured through the use of a short Schelkin spiral near the head of the engine. The measured detonation wave velocities were in excess of 2500 m/s in agreement with the theoretical C-J velocity. The engine was first tested in a straight tube configuration without a nozzle, and the time resolved thrust was measured simultaneously with the head-end pressure. Similar measurements were made with the converging-diverging nozzle attached. The time correlation of the thrust and head-end pressure data was found to be excellent. The major purpose of the converging-diverging nozzle was to configure the engine for driving an MHD generator for the direct production of electrical power. Additional tests were therefore necessary in which seed (cesium-hydroxide dissolved in methanol) was directly injected into the engine as a spray. The exhaust plume was then interrogated with a microwave interferometer in an attempt to characterize the plasma conditions, and emission spectroscopy measurements were also acquired. Data reduction efforts indicate that the plasma exhaust is very highly ionized, although there is some uncertainty at this time as to the relative abundance of negative OH ions. The emission spectroscopy data provided some indication of the species in the exhaust as well as a measurement of temperature. A 24-electrode-pair segmented Faraday channel and 0.6 Tesla permanent magnet assembly were then installed on Marshall Space Flight Center's (MSFC's) rectangular channel pulse detonation research engine. Magnetohydrodynamic (MHD) electrical power extraction experiments were carried out for a range of load impedances in which cesium hydroxide seed (dissolved in methanol) was sprayed into the gaseous oxygen/hydrogen propellants. Positive power extraction was obtained, but preliminary analysis of the data indicated that the plasma electrical conductivity is lower than anticipated and the near-electrode voltage drop is not negligible. It is believed that the electrical conductivity is reduced due to a large population of negative OH ions. This occurs because OH has a strong affinity for capturing free electrons. The effect of near-electrode voltage drop is associated with the high surface-to-volume ratio of the channel (1-inch by 1-inch cross-section) where surface effects play a dominant role. As usual for MHD devices, higher performance will require larger scale devices. Overall, the gathered data is extremely valuable from the standpoint of understanding plasma behavior and for developing empirical scaling laws.
Litchford, Ron J.↗
A Multifunctional Bistable Ultrathin Composite Boom for In-Space Monitoring of Deployment Dynamics
A novel concept of a multifunctional deployable ultrathin composite boom with flexible electronics and circuits integrated in a highly compact configuration, which can monitor its deployment dynamics in space, is presented in this paper. This concept is particularly suitable for CubeSats with extremely limited payload volume. The multifunctional deployable boom will be flight hardware installed in a 3U CubeSat that is scheduled to be launched to the International Space Station (ISS) in 2023 as an in-space technology demonstration. The multifunctional boom consists of a bistable self-deployable ultrathin composite boom, flexible electronics and circuitry for dynamics monitoring, and embedded flexible thin wires for power delivery and data transmission. The design, materials, and fabrication methods for the multifunctional boom are presented. Tests in simulated space environments showed the survivability and stability of the flexible electronics within a temperature range of 7 °C to 50 °C and under a high vacuum level of approximately 1 × 10−6 Torr. Ground-based vibration and deployment tests demonstrated the overall design of the multifunctional boom, data acquisition system, and deployment mechanism. Analyses of the data obtained from the integrated flexible electronics successfully captured the deployment dynamics and identified the natural frequencies of the boom in the range of 0–100 Hz. These results demonstrate that the concept is a promising approach to future multifunctional ultrathin deployable space structures.
Yao Yao↗
A Multifunctional Bistable Ultrathin Composite Boom for In-Space Monitoring of Deployment Dynamics
A novel concept of a multifunctional deployable ultrathin composite boom with flexible electronics and circuits integrated in a highly compact configuration, which can monitor its deployment dynamics in space, is presented in this paper. This concept is particularly suitable for CubeSats with extremely limited payload volume. The multifunctional deployable boom will be flight hardware installed in a 3U CubeSat that is scheduled to be launched to the International Space Station (ISS) in 2023 as an in-space technology demonstration. The multifunctional boom consists of a bistable self-deployable ultrathin composite boom, flexible electronics and circuitry for dynamics monitoring, and embedded flexible thin wires for power delivery and data transmission. The design, materials, and fabrication methods for the multifunctional boom are presented. Tests in simulated space environments showed the survivability and stability of the flexible electronics within a temperature range of 7 °C to 50 °C and under a high vacuum level of approximately 1 × 10−6 Torr. Ground-based vibration and deployment tests demonstrated the overall design of the multifunctional boom, data acquisition system, and deployment mechanism. Analyses of the data obtained from the integrated flexible electronics successfully captured the deployment dynamics and identified the natural frequencies of the boom in the range of 0–100 Hz. These results demonstrate that the concept is a promising approach to future multifunctional ultrathin deployable space structures.
Yao Yao↗
Downfolding Complex Materials Problems Onto Model Hamiltonians for Quantum Computers
Simulating the properties of quantum materials is expected to be one of the exciting applications for quantum computers and where we hope to see advantages over classical hardware. The complexity of ab initio Hamiltonians describing the physics of application-relevant materials places them beyond the realm of possibility for solution on near-term hardware with a limited number of qubits. Various Hamiltonian approximations, including Hamiltonian downfolding, offers a possibility towards simulating complex materials on near-term hardware. This is accomplished by approximating the relevant physics of a given material through their representation by simpler model Hamiltonians, such as the Hubbard Hamiltonian or extensions of it. Here we employ a well-defined first-principles methodology for deriving downfolded multi-band extended Hubbard Hamiltonians of materials, capturing strong electronic correlation and electron-phonon coupling, based on the formalism of Wannier functions and the calculation of the screened Coulomb interaction. We demonstrate for a variety of systems that quantum simulation of these downfolded Hamiltonians reproduces key properties, thus establishing downfolding as a promising route to achieve near-term simulation of application-relevant systems on quantum hardware.
Antonios Markos Alvertis↗
Downfolding complex materials problems onto model Hamiltonians for quantum computers
Simulating the properties of quantum materials is expected to be one of the exciting applications for quantum computers and where we hope to see advantages over classical hardware. The complexity of ab initio Hamiltonians describing the physics of application-relevant materials places them beyond the realm of possibility for solution on near-term hardware with a limited number of qubits. Various Hamiltonian approximations, including Hamiltonian downfolding, offers a possibility towards simulating complex materials on near-term hardware. This is accomplished by approximating the relevant physics of a given material through their representation by simpler model Hamiltonians, such as the Hubbard Hamiltonian or extensions of it. Here we employ a well-defined first-principles methodology for deriving downfolded multi-band extended Hubbard Hamiltonians of materials, capturing strong electronic correlation and electron-phonon coupling, based on the formalism of Wannier functions and the calculation of the screened Coulomb interaction. We demonstrate for a variety of systems that quantum simulation of these downfolded Hamiltonians reproduces key properties, thus establishing downfolding as a promising route to achieve near-term simulation of application-relevant systems on quantum hardware.
Antonios M. Alvertis↗
Multistage depressed collector for dual mode operation
A depressed collector which captures the spent electrons of a microwave transmitting tube at high efficiency in both high and low power modes of operation is described. The collector comprises entrance and end electrodes, the end electrode having a spike extending toward entrance electrode. Intermediate electrodes and the entrance electrode each have a central aperture and, together, these electrodes capture most high power mode spent electrons. The apertures of the electrodes increase in size in a downstream direction. To capture low power mode spent electrons a low power mode electrode is positioned between the last intermediate electrode and the end electrode. This electrode has a central aperture preferably smaller but no larger than that of the last intermediate electrode. An auxiliary low power mode electrode may be added having a central aperture larger than that of the low power mode electrode. All of the electrodes are at voltages provided by a voltage divider connected between a potential.
Kosmahl, H. C.↗
Evaporated and recrystallized CdS layers.
Evaporated and recrystallized CdS layers, discussing electron mobility, level distribution, capture cross section and techniques of measurement
ELECTRON DISTRIBUTION↗
CTE Measurements of Carbon Fibers in ESEM
The strong appeal of carbon fiber reinforced ceramic matrix and carbon-carbon composites arises from their promising high temperature performance within laboratory-simulated nozzle, leading edge and combustor environments. The main drawback in these systems are two fold; namely oxidation affinity and CTE mismatch. To date the emphasis has been on axial CTE mismatch with the push on estimating (component) laminate level data. However, in heterogeneous and anisotropic systems, all failure mechanisms are at micro or nano scales. This paper will report plans and progress on single carbon fibers efforts in order to develop its temperature dependent, anisotropic thermophysical and thermomechanical properties using combination of x-ray spectroscopy and environmental scanning electron microscopy to capture circumferential expansion from 20-900 C in within the SEM chamber. Surface roughness measurements were also determined. Crystallinity was also determined by the quality of the electron diffraction (ED) patterns.
Effinger, Michael↗
Auroral Electron Estimates From the Voyager 2 Plasma Observations During the Uranus Flyby and Comparisons to Earths Aurora
Introduction: We are fortunate enough to have plasma observations from the Voyager 2 flyby of Uranus in 1986. We revisit these data in the context of estimating what the auroral electrons in Uranus’ magnetosphere would look like and how they would compare to what we know about Earth’s aurora and how it is coupled to Earth’s magnetosphere. The Voyager 2 flyby of Uranus provided us with valua-ble information about the plasma environment in-side the magnetosphere of Uranus (Sittler, et al., 1987). The maximum energy of the Voyager 2 plasma instrument was 6 keV for electrons and it is clear from the data that the electron fluxes extended be-yond that range to higher energies. Future meas-urements should extend up to around 30 keV in or-der to fully capture the full electron distribution within the magnetosphere and those corresponding to the aurora. The electron temperatures were around 2 keV throughout the magnetosphere of Uranus and the densities ranged from 0.001 to 1.0 per cubic centimeter. These observed parameters will be compared to analogous structures within Earth’s magnetosphere and be used to estimate the energy and fluxes of electrons that would be observed within the auroral zones on Uranus.
R G Michell↗