Search NASA⌕ Search

SEARCH · Search NASA

Results for “EQUATORIAL ORBIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Origin of the Moon

The similarities in siderophile abundances strongly suggest that the Moon was derived from the Earth's mantle after the Earth's core had formed. The energy required to remove material from the Earth's mantle and place it into geocentric orbit can be supplied most readily by impact processes during accretion of the Earth. Impacts of late-accreting, high-velocity planetismals would evaporate many times their masses of mantle material. These gases would be accompanied by a massive spray of shock-melted silicate droplets. It is suggested that the gases produced from such near-equatorial impacts were rapidly spun out into equatorial geocentric orbit. The evaporated material was selectively recondensed, and, accompanied by the shock melted, devolatilized silicate droplets, accreted to form a sediment ring of Earth-orbiting planetismals. This sediment ring also captured a significant proportion of Earth-bound planetismals. The Moon was formed by accretion from planetismals comprising the sediment ring.

Ringwood, A. E.↗
NASA NTRS1973

Observation of 38-334-keV interplanetary protons during solar quiet times

The observations were from the particle experiment aboard the Apollo 16 subsatellite which was ejected April 24, 1972 into an approximately equatorial lunar orbit from the Apollo 16 lunar science module. The proton fluxes vary by a factor of about 5 over a six-month period. The proton measurements were made with a pair of surface barrier semiconductor telescopes. The accuracy of the proton flux measurements during times when electrons are present is highly dependent on the accuracy of the electronic channel matching.

Lin, R. P.↗
NASA NTRS1981

Discovery of ions with nuclear charge Z greater than or equal to 9 stability trapped in the earth's radiation belts

Observations of MeV heavy ions obtained by Explorer 45 in an equatorial earth orbit during a 7 month period in 1972 are presented, including data from four major magnetic storms. The spacecraft contained a heavy ion detector telescope and heavy ion discriminator electronics. Heavy ions were distinguished from protons and electrons, and He ions and ions heavier than F were recorded on separate data channels. The L equals 2.25 to L equals 4 zones were probed, and it was found that the relative enhancement in heavy ion fluxes in the radiation belts over the prestorm ion flux intensities tends to increase with increasing ion mass and/or increasing ion energy in the MeV range. The radial profiles of ions with nucleon number greater than nine peak at L equals 2.9, and MeV ions in this class decay on time scales from 23 days at L equals 3.25 to 55 days at L equals 2.25. Indirect evidence indicated a solar source for the very heavy ions in the magnetosphere.

Spjeldvik, W. N.↗
NASA NTRS1983

Entwined and parallel bundled orbits as alternative models for narrow planetary ringlets

Particle orbits can be bundled in two different ways to produce narrow, Uranus-type ringlets. The usual assumption is that they are packed in a parallel manner in a structure that is essentially only two-dimensional, but it is then difficult to explain the large numbers of particles per unit area of the ring plane that are inferred from the observations. The alternative of a bundle of entwined orbits produces a three-dimensional structure of potentially large projected areal density. A start has been made in identifying possible mechanisms for stabilizing these structures, but much remains to be done, particularly for the less-studied model of entwined orbits. The two models might be discriminated observationally by differences in the motion of the line of intersection of the orbital and equatorial planes, and by the predicted radial reversal (entwined) or nonreversal (parallel) of features in occultation signatures taken at certain longitudes.

Eshleman, V. R.↗
NASA NTRS1992

Mars secular obliquity change due to the seasonal polar caps

There is a weak positive feedback mechanism between the astronomy and meteorology of Mars. The mechanism is this: the seasonal waxing and waning polar caps cause small changes in Mars' dynamical flattening. Because the changes in flattening are out of phase with the sun, there is a net annual solar torque on the planet which increases the angle between the equatorial and orbital phanes. On the basis of Viking observations of the present climate and simple atmospheric models of past climates, these seasonal shifts of mass between the atmosphere and polar caps are capable of secularly increasing Mars' obliquity by about 1 or 2 deg since the origin of the solar system. Thus, the climate, driven largely by the axial tilt, reacts back on the planet and slightly enhances the seasons on Mars as time progresses. More sophisticated models will probably not change this result much; therefore this mechanism probably produced only minor changes in Mars' climate. It causes negligible changes in the axial tilt and climate of the earth.

Rubincam, David P.↗
NASA NTRS1991

Radar and spacecraft ranging to Mercury between 1966 and 1988

Improved solutions have been obtained for the orbit and equatorial cross-section of Mercury using radar ranging data spanning 22 years. These data have yielded new results on the precession of Mercury's perihelion and better limits on a possible time variation in the gravitational constant G.

Anderson, John D.↗
NASA NTRS1994

Space simulation techniques and facilities for SAX STM test campaign

SAX is a satellite for X-Ray astronomy. It is a major element of the overall basic Science Program of the Italian Space Agency (ASI) and is being developed with the contribution of the Netherlands Agency for Aerospace Programs (NIVR). The scientific objectives of SAX are to carry out systematic and comprehensive observations of celestial X-Ray sources over the 0.1 - 300 KeV energy range with special emphasis on spectral and timing measurements. The satellite will also monitor the X-Ray sky to investigate long-term source variability and to permit localization and study of X-Ray transients. Alenia Spazio is developing the satellite that is intended for launch in the second half of 1995 in a low, near-equatorial Earth orbit. At system level a Structural Thermal Model (STM) has been conceived to verify the environmental requirements by validating the mechanical and thermal analytical models and qualifying satellite structure and thermal control. In particular, the following tests have been carried out in Alenia Spazio, CEA/CESTA and ESTEC facilities: Modal Survey, Centrifuge, Acoustic, Sinusoidal/Random Vibration and Thermal Balance. The paper, after a short introduction of the SAX satellite, summarizes the environmental qualification program performed on the SAX STM. It presents test objectives, methodologies and relevant test configurations. Peculiar aspects of the test campaign are highlighted. Problems encountered and solutions adopted in performing the tests are described as well. Furthermore, test results are presented and assessed.

Giordano, Pietro↗
NASA NTRS2005

The Impact of the Sun on Passive Remote Sensing at L-band

The sun is a strong source of radiation at L-band behaving roughly like a thermal source with a temperature ranging between 10(exp 5) - 10(exp 7) K, depending on solar activity. This is an important consideration at 1.4 GHz (the window set aside for passive use only) where future satellite sensors will operate to monitor soil moisture and sea surface salinity (e.g. SMOS, Aquarius, and Hydros). Straight forward calculations show that such a source of radiation can be a significant issue for these remote sensing applications, especially in the case of remote sensing of sea surface salinity. Radiation from the sun impacts passive remote sensing systems in several ways. First, is the solar radiation that comes directly from the sun (line-of-sight from sun to spacecraft that enters the radiometer through antenna side lobes). This is a particular problem for sensors in sunsynchronous orbits near the terminator (e.g. orbits with equatorial crossing times near 6am/6pm) because the spacecraft is in the sun most of the time. Second, is solar radiation that is reflected (specularly) from the mean surface to the radiometer. This contribution can be nearly as large as the direct ray, especially when the reflection is from the ocean surface which has a high reflection coefficient. Finally, there is "incoherent" signal reflected from the surface structure (roughness) to the radiometer antenna. Examples illustrating the significance of these terms is presented for the case of a pushbroom radiometer such as Aquarius and a conically scanning radiometer such as proposed for Hydros. Calculations are made using a set of theoretical patterns for these beams together with data on solar radiation obtained from by a worldwide network of observing stations known as Radio Solar Telescope Network (RSTN). Near solar minimum, solar contamination is not a problem unless the sun enters near the main beam. But near solar maximum, account must be made for radiation from the sun even when the signal enters in sidelobes far from the main beam.

LeVine, David M.↗
NASA NTRS2005

Electrodynamic Tether as a Thruster for MXER Studies

Electrodynamic propulsion based on the interaction of a conducting tether with the background magnetic field can be implemented across a range of system designs. Bare tethers, bare and insulated tethers with a balloon termination, and insulated tethers with a grid-sphere termination have been proposed for different applications. Electrodynamic tether as a thruster is currently proposed for the Momentum exchange Electrodynamic Reboost (MXER) Tether System that currently under development at NASA Marshal Space Flight Center. The choice of a tether design for a specific mission is based on the analysis of tether system performance. Different parameters describing tether performance such as system acceleration and efficiency can be calculated if the current distribution along the tether at the satellite trajectory is known. The code calculating the tether current collection for the bare and partly insulated tethers with the circular (wire) and rectangular (tape) cross-sections operating in the thrust mode has been developed and applied for MXER that is expected to operate in an equatorial elliptical orbit with perigee in the altitude range of 300-500km and apogee between 5000-8000km. The collected current is calculated as a function of the satellite velocity and the Earth s magnetic field, plasma parameters (plasma density and temperature), and tether parameters (tether length, the length of the bare segment, the type and the dimensions of the cross-section). The deviation of the collected current from the OML model due to the tether thickness and self-induced magnetic field (for tether with a circular cross-section) is taken into account.

Khazanov, G. V.↗
NASA NTRS2015

Attitude Design for the LADEE Mission

The Lunar Atmosphere and Dust Environment Explorer (LADEE) satellite successfully completed its 148-day science investigation in a low-altitude, near-equatorial lunar orbit on April 18, 2014. The LADEE spacecraft was built, managed and operated by NASA's Ames Research Center (ARC). The Mission Operations Center (MOC) was located at Ames and was responsible for activity planning, command sequencing, trajectory and attitude design, orbit determination, and spacecraft operations. The Science Operations Center (SOC) was located at Goddard Space Flight Center and was responsible for science planning, data archiving and distribution. This paper details attitude design and operations support for the LADEE mission. LADEE's attitude design was shaped by a wide range of instrument pointing requirements that necessitated regular excursions from the baseline one revolution per orbit "Ram" attitude. Such attitude excursions were constrained by a number of flight rules levied to protect instruments from the Sun, avoid geometries that would result in simultaneous occlusion of LADEE's two star tracker heads, and maintain the spacecraft within its thermal and power operating limits. To satisfy LADEE's many attitude requirements and constraints, a set of rules and conventions was adopted to manage the complexity of this design challenge and facilitate the automation of ground software that generated pointing commands spanning multiple days of operations at a time. The resulting LADEE Flight Dynamics System (FDS) that was developed used Visual Basic scripts that generated instructions to AGI's Satellite Tool Kit (STK) in order to derive quaternion commands at regular intervals that satisfied LADEE's pointing requirements. These scripts relied heavily on the powerful "align and constrain" capability of STK's attitude module to construct LADEE's attitude profiles and the slews to get there. A description of the scripts and the attitude modeling they embodied is provided. One particular challenge analysts faced was in the design of LADEE maneuver attitudes. A flight rule requiring pre-maneuver verification of in-flight maneuver conditions by ground operators prior to burn execution resulted in the need to accommodate long periods in the maneuver attitude. This in turn complicated efforts to satisfy star tracker interference and communication constraints in lunar orbit. In response to this challenge, a graphical method was developed and used to survey candidate rotation angles about the thrust vector. This survey method is described and an example of its use on a particular LADEE maneuver is discussed. Finally, the software and methodology used to satisfy LADEE's attitude requirements are also discussed in the context of LADEE's overall activity planning effort. In particular, the way in which strategic schedules of instrument and engineering activities were translated into actual attitude profiles at the tactical level, then converted into precise quaternion commands to achieve those pointing goals is explained. In order to reduce the risk of time-consuming re-planning efforts, this process included the generation of long-term projections of constraint violation predictions for individual attitude profiles that could be used to establish keep-out time-frames for particular attitude profiles. The challenges experienced and overall efficacy of both the overall LADEE ground system and the attitude components of the Flight Dynamics System in meeting LADEE's varied pointing requirements are discussed.

LADEE↗
NASA NTRS1982

Classification of surface units in the equatorial region of Mars based on Viking Orbiter color, albedo, and thermal data

Clusters corresponding to mappable surface units are sought in Viking Orbiter color, albedo, and thermal inertia data for the equatorial region of Mars. A principal components analysis indicated that 84% of the variance within the data for this region can be carried along two vector directions which typify the dominant trend of Martian surface materials. These dominant trends were deemphasized by stretching the data from a five-dimensional elliptical swarm into a hypersphere, through the use of principal component techniques. The decorrelated data were then plotted in a triangle diagram with red/violet, albedo and thermal inertia apices to facilitate inherent cluster discrimination. As many as eight clusters can be identified, with important mixing between them. The three major clusters consist of red and grey material extremes, along with intermediate value materials.

Arvidson, R. E.↗
NASA NTRSDate not supplied

Characterizing the Seasonal and Diurnal Aerosol Cycles using CATS Space-Based Lidar

The broader effects aerosols have on the earth and climate system is determined by a host of factors including their composition and vertical distribution. Characterizing the vertical distribution of clouds and aerosols is especially important considering it remains one of the greatest uncertainties in climate predictions. Space-based lidar, such as Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and Cloud-Aerosol Transport System (CATS), is especially well suited as a remote sensing tool in determining this vertical distribution. CALIOP has been used for over a decade to observe the global and vertical distribution of clouds and aerosols but is limited by Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations’ (CALIPSO’s) polar orbit to set equatorial crossing times of ~1:30AM/PM. This limited temporal sampling limits the use of CALIOP in determining the full diurnal variability of clouds and aerosols. On the International Space Station (ISS), with its inclined orbit and variable equatorial crossing times, the CATS lidar provided an opportunity to study the vertical profile of clouds and aerosols at a variety of local times. With this 33-month CATS record, we show that CATS captured the seasonal changes in global aerosol distributions and compares favorably with other instruments and models. Specifically targeting biomass burning regions, we also find CATS could observe the documented diurnal cycle in aerosol altitudes with some caveats. With the next generation of proposed space-based lidars including designs in similar orbits as the ISS and CATS, future studies of the aerosol diurnal and seasonal cycles would also be possible.

Kenneth Christian↗
NASA NTRS1986

Roles for tethers on an evolving space station

A scenario was developed for evolution of space station tether capabilities. As tether imposed constaints on station developments and operations were minimized, maximum benefits were derived from a mutually compatible combination of: (1)electrodynamic tethers for power, thrust, and libration control; (2)momentum transfer operations involving the STS or upper stages; (3)aeromaneuvering devices for space station orbital plan change; and (4)tethered constellations and tether/free-flyer combinations. Some concepts determined for advance tether facilities orbiting the moon: (1)stationkeeping deltaVs to stay in precise equatorial or polar orbits; (2)ratio of facility mass to maximum payload mass (surface-orbit-escape); (3)electric-thruster power requirements and maximum rendezvous frequencies; and (4)overall capabilities and major constraints on such facilities.

Carroll, J. A.↗
NASA NTRS1972

Star sensor/mapper for the Small Astronomy Satellites.

As a requirement for the Small Astronomy Satellite-B (SAS-B), a star sensor was designed to provide satellite positional data to an accuracy of 3 arc minutes for satellite spin rates of 1/12 rpm and 1 rpm. The star sensor is required to detect stars having a +4 visual magnitude during the sunlit portion of the orbit. The spacecraft orientation can be anything achievable in its near equatorial 500-km orbit. The design of the star sensor resulted in an instrument which weighs 6.5 lbs., consumes 0.4 W and operates at spin rates ranging from 1/12 rpm to 3 rpm. The instrument design incorporates optical features providing excellent uniformity of response across the 5 by 10 deg field of view.

Schenkel, F. W.↗
NASA NTRS1992

The role of predicted solar activity in TOPEX/Poseidon orbit maintenance maneuver design

Following launch in June 1992, the TOPEX/Poseidon satellite will be placed in a near-circular frozen orbit at an altitude of about 1336 km. Orbit maintenance maneuvers are planned to assure all nodes of the 127-orbit 10-day repeat ground track remain within a 2 km equatorial longitude bandwidth. Orbit determination, maneuver execution, and atmospheric drag prediction errors limit overall targeting performance. This paper focuses on the effects of drag modeling errors, with primary emphasis on the role of SESC solar activity predictions, especially the 27-day outlook of the 10.7 cm solar flux and geomagnetic index used by a simplified version of the Jacchia-Roberts density model developed for this TOPEX/Poseidon application. For data evaluated from 1983-90, the SESC outlook performed better than a simpler persistence strategy, especially during the first 7-10 days. A targeting example illustrates the use of ground track biasing to compensate for expected orbit predictions errors, emphasizing the role of solar activity prediction errors.

Frauenholz, Raymond B.↗