Search NASA⌕ Search

SEARCH · Search NASA

Results for “Earth Filter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

An extended Kalman filter for spinning spacecraft attitude estimation

An extended Kalman filter for real-time ground attitude estimation of a gyro-less spinning spacecraft was developed and tested. The filter state vector includes the angular momentum direction, phase angle, inertial nutation angle, and inertial and body nutation rates. The filter solves for the nutating three-axis attitude and accounts for effects due to principle axes offset from the body axes. The attitude is propagated using the kinematics of a rigid body symmetric about the principle spin axis; disturbance torques are assumed to be small. Filter updates consist only of the measured angles between celestial objects (Sun, Earth, etc.) and the nominal spin axis, and the times these angles were measured. Both simulated data and real data from the Dynamics Explorer -A (DE-A) spacecraft were used to test the filter; the results are presented. Convergence was achieved rapidly from a wide range of a priori state estimates, and sub-degree accuracy was attained. Systematic errors affecting the solution accuracy are discussed, as are the results of an attempt to solve for sensor measurement angle biases in the state vector.

Baker, David F.↗
NASA NTRS1982

Inversion of data from diffraction-limited multiwavelength remote sensors. II - Nonlinear dependence of observables on the geophysical parameters

Linear shift-invariant spatial filtering is applied to inversion of radiometric measurements of the earth in both polarizations at the following frequencies: 6.6, 10.7, 18, 21, and 37 GHz. For purposes of radiative transfer calculations at these frequencies, the state of the ocean-atmosphere system is described by a seven-parameter model. The parameters are near-surface wind speed, sea surface temperature, integrated water vapor mass, scale height of water vapor in an exponential distribution, integrated liquid water mass, height of the liquid water, and characteristic drop radius in a Best (1950) drop size distribution. Also described is a spatial filtering algorithm by means of which geophysical parameters are retrieved from measurements made over the ocean by the scanning multichannel microwave radiometer on the Nimbus 7 satellite. The parameters here are near-surface wind speed, sea surface temperature, rain rate, integrated atmospheric water vapor content, and integrated liquid water content (including rain).

Rosenkranz, P. W.↗
NASA NTRS1984

LANDSAT-4 horizon scanner performance evaluation

Representative data spans covering a little more than a year since the LANDSAT-4 launch were analyzed to evaluate the flight performance of the satellite's horizon scanner. High frequency noise was filtered out by 128-point averaging. The effects of Earth oblateness and spacecraft altitude variations are modeled, and residual systematic errors are analyzed. A model for the predicted radiance effects is compared with the flight data and deficiencies in the radiance effects modeling are noted. Correction coefficients are provided for a finite Fourier series representation of the systematic errors in the data. Analysis of the seasonal dependence of the coefficients indicates the effects of some early mission problems with the reference attitudes which were computed by the onboard computer using star trackers and gyro data. The effects of sun and moon interference, unexplained anomalies in the data, and sensor noise characteristics and their power spectrum are described. The variability of full orbit data averages is shown. Plots of the sensor data for all the available data spans are included.

Bilanow, S.↗
NASA NTRS1984

An integrated dynamical and geochemical approach to lunar origin modelling

The three major categories of models of lunar origin which explain the Moon's properties are complete and a more general scenario is presented. The model presented is as the Earth grew by planetesimal bombardment, a circumterrestrial cloud of particles was created from a combination of impact ejected mantle material and planetismals captured directly into orbit around the Earth. The compositional properties are explained two ways: (1) a few big late planetismals of diverse composition are captured in orbit and/or hit the Earth; and (2) the circumterrestrial swarm acts as a filter, preferentially capturing small weak silicate bodies, while passing large iron planetismals.

Greenberg, R.↗
NASA NTRS2002

Formation Flying Satellite Control Around the L2 Sun-Earth Libration Point

A growing interest in formation flying satellites demands development and analysis of control and estimation algorithms for station-keeping and formation maneuvering. This paper discusses the development of a discrete linear-quadratic-regulator control algorithm for formations in the vicinity of the L2 sun-earth libration point. The development of an appropriate Kalman filter is included as well. Simulations are created for the analysis of the station-keeping and various formation maneuvers of the Stellar Imager mission. The simulations provide tracking error, estimation error, and control effort results. From the control effort, useful design parameters such as delta V and propellant mass are determined. For formation maneuvering, the formation spacecraft track to within 4 meters of their desired position and within 1.5 millimeters per second of their desired zero velocity. The filter, with few exceptions, keeps the estimation errors within their three-sigma values. Without noise, the controller performs extremely well, with the formation spacecraft tracking to within several micrometers. Each spacecraft uses around 1 to 2 grams of propellant per maneuver, depending on the circumstances.

Hamilton, Nicholas H.↗
NASA NTRS2003

CHAMP Magnetic Anomalies of the Antarctic Crust

Regional magnetic signals of the crust are strongly masked by the core field and its secular variations components and hence difficult to isolate in the satellite measurements. In particular, the un-modeled effects of the strong auroral external fields and the complicated- behavior of the core field near the geomagnetic poles conspire to greatly reduce the crustal magnetic signal-to-noise ratio in the polar regions relative to the rest of the Earth. We can, however, use spectral correlation theory to filter the static lithospheric and core field components from the dynamic external field effects. To help isolate regional lithospheric from core field components, the correlations between CHAMP magnetic anomalies and the pseudo magnetic effects inferred from gravity-derived crustal thickness variations can also be exploited.. Employing these procedures, we processed the CHAMP magnetic observations for an improved magnetic anomaly map of the Antarctic crust. Relative to the much higher altitude Orsted and noisier Magsat observations, the CHAMP magnetic anomalies at 400 km altitude reveal new details on the effects of intracrustal magnetic features and crustal thickness variations of the Antarctic.

Kim, Hyung Rae↗
NASA NTRS1993

Stochastic Parameters in Lunar Laser Ranging

This oral presentation describes the techniques, algorithms, and results of incorporatng a Kalman-smoothing technique into the square-root information filter when estimating deterministic and stochastic parameters relating to Earth, the Moon, and the lunar and planetary ephemerides.

lunar laser ranging ephemerides stochastic paramet↗
NASA NTRS2016

Exploiting Measurement Uncertainty Estimation in Evaluation of GOES-R ABI Image Navigation Accuracy Using Image Registration Techniques

In evaluating GOES-R Advanced Baseline Imager (ABI) image navigation quality, upsampled sub-images of ABI images are translated against downsampled Landsat 8 images of localized, high contrast earth scenes to determine the translations in the East-West and North-South directions that provide maximum correlation. The native Landsat resolution is much finer than that of ABI, and Landsat navigation accuracy is much better than ABI required navigation accuracy and expected performance. Therefore, Landsat images are considered to provide ground truth for comparison with ABI images, and the translations of ABI sub-images that produce maximum correlation with Landsat localized images are interpreted as ABI navigation errors. The measured local navigation errors from registration of numerous sub-images with the Landsat images are averaged to provide a statistically reliable measurement of the overall navigation error of the ABI image. The dispersion of the local navigation errors is also of great interest, since ABI navigation requirements are specified as bounds on the 99.73rd percentile of the magnitudes of per pixel navigation errors. However, the measurement uncertainty inherent in the use of image registration techniques tends to broaden the dispersion in measured local navigation errors, masking the true navigation performance of the ABI system. We have devised a novel and simple method for estimating the magnitude of the measurement uncertainty in registration error for any pair of images of the same earth scene. We use these measurement uncertainty estimates to filter out the higher quality measurements of local navigation error for inclusion in statistics. In so doing, we substantially reduce the dispersion in measured local navigation errors, thereby better approximating the true navigation performance of the ABI system.

navigation performance↗
NASA NTRS2023

Thermal Emission from the Earth-sized Exoplanet TRAPPIST-1 b using JWST

The TRAPPIST-1 system is remarkable for its seven planets that are similar in size, mass, density, and stellar heating to the rocky planets Venus, Earth, and Mars in our own Solar System [1]. All TRAPPIST-1 planets have been observed with the transmission spectroscopy technique using the Hubble or Spitzer Space Telescopes, but no atmospheric features have been detected or strongly constrained [2–5]. TRAPPIST-1 b is the closest planet to the system’s M dwarf star, and it receives 4 times as much irradiation as Earth receives from the Sun. This relatively large amount of stellar heating suggests that its thermal emission may be measurable. Here we present photometric secondary eclipse observations of the Earth-sized TRAPPIST1 b exoplanet using the F1500W filter of the MIRI instrument on JWST. We detect the secondary eclipse in each of five separate observations with 8.7-sigma confidence when all data are combined. These measurements are most consistent with re-radiation of the TRAPPIST-1 star’s incident flux from only the dayside hemisphere of the planet. The most straightforward interpretation is that there is little or no planetary atmosphere redistributing radiation from the host star and also no detectable atmospheric absorption from carbon dioxide (CO 2 ) or other species.

Thermal Emission↗
NASA NTRS2012

Mars Science Laboratory Orbit Determination

This paper describes the orbit determination process, results and filter strategies used by the Mars Science Laboratory Navigation Team during cruise from Earth to Mars. The new atmospheric entry guidance system resulted in an orbit determination paradigm shift during final approach when compared to previous Mars lander missions. The evolving orbit determination filter strategies during cruise are presented. Furthermore, results of calibration activities of dynamical models are presented. The atmospheric entry interface trajectory knowledge was significantly better than the original requirements, which enabled the very precise landing in Gale Crater.

orbit determination↗
NASA NTRS1989

In flight demonstration of mass property identification and jet plume interaction on the AeroAssist Flight Experiment

Algorithms have been developed for in-flight demonstration of spacecraft mass, center of mass, and inertia matrix which autonomously measure mass properties as they change in-flight due to consumable expenditures, payload deployment/retrieval, and docking. The testing of these algorithms can be conducted by means of a mass-properties estimator, which is a second-order nonlinear filter resembling an extended Kalman filter. The AeroAssist Flight Experiment, which will demonstrate the use of the earth's atmosphere to assist orbital changes, will carry the Rarefied-flow Aerodynamic Measurement Experiment (RAME); data taken by RAME will be used by the mass-properties estimator to ascertain spacecraft mass properties, and estimates from this filter will be compared to predicted values of the mass properties to validate the estimator.

Bergmann, Edward V.↗
NASA NTRS1990

Kalman filter based range estimation for autonomous navigation using imaging sensors

Rotorcraft operating in high-threat environments fly close to the surface of the earth to utilize surrounding terrain, vegetation, or man-made objects to minimize the risk of being detected by the enemy. Two basic requirements for obstacle avoidance are detection and range estimation of the object from the current rotorcraft position. There are many approaches to the estimation of range using a sequence of images. The approach used in this analysis differes from previous methods in two significant ways: an attempt is not made to estimate the rotorcraft's motion from the images; and the interest lies in recursive algorithms. The rotorcraft parameters are assumed to be computed using an onboard inertial navigation system. Given a sequence of images, using image-object differential equations, a Kalman filter (Sridhar and Phatak, 1988) can be used to estimate both the relative coordinates and the earth coordinates of the objects on the ground. The Kalman filter can also be used in a predictive mode to track features in the images, leading to a significant reduction of search effort in the feature extraction step of the algorithm. The purpose is to summarize early results obtained in extending the Kalman filter for use with actual image sequences. The experience gained from the application of this algorithm to real images is very valuable and is a necessary step before proceeding to the estimation of range during low-altitude curvilinear flight. A simple recursive method is presented to estimate range to objects using a sequence of images. The method produces good range estimates using real images in a laboratory set up and needs to be evaluated further using several different image sequences to test its robustness. The feature generation part of the algorithm requires further refinement on the strategies to limit the number of features (Sridhar and Phatak, 1989). The extension of the work reported here to curvilinear flight may require the use of the extended Kalman filter.

Sridhar, Banavar↗
NASA NTRS2002

Numerical Filtering of Spurious Transients in a Satellite Scanning Radiometer: Application to CERES

The Clouds and Earth Radiant Energy System (CERES) scanning, radiometer was designed to provide high accuracy measurements of the radiances from the earth. Calibration testing of the instruments showed the presence of all undesired slow transient in the measurements of all channels at 1% to 2% of the signal. Analysis of the data showed that the transient consists of a single linear mode. The characteristic time of this mode is 0.3 to 0.4 s and is much greater than that the 8-10-ms response time of the detector, so that it is well separated from the detector response. A numerical filter was designed for the removal of this transient from the measurements. Results show no trace remaining of the transient after application of the numerical filter. The characterization of the slow mode on the basis of ground calibration data is discussed and flight results are shown for the CERES instruments aboard the Tropical Rainfall Measurement Mission and Terra spacecraft. The primary influence of the slow mode is in the calibration of the instrument and the in-flight validation of the calibration. This method may be applicable to other radiometers that are striving for high accuracy and encounter a slow spurious mode regardless of the underlying physics.

Smith, G. Louis↗
NASA NTRS1996

Accuracy Studies of a Magnetometer-Only Attitude-and-Rate-Determination System

A personal computer based system was recently prototyped that uses measurements from a three axis magnetometer (TAM) to estimate the attitude and rates of a spacecraft using no a priori knowledge of the spacecraft's state. Past studies using in-flight data from the Solar, Anomalous, and Magnetospheric Particles Explorer focused on the robustness of the system and demonstrated that attitude and rate estimates could be obtained accurately to 1.5 degrees (deg) and 0.01 deg per second (deg/sec), respectively, despite limitations in the data and in the accuracies of te truth models. This paper studies the accuracy of the Kalman filter in the system using several orbits of in-flight Earth Radiation Budget Satellite (ERBS) data and attitude and rate truth models obtained from high precision sensors to demonstrate the practical capabilities. This paper shows the following: Using telemetered TAM data, attitude accuracies of 0.2 to 0.4 deg and rate accuracies of 0.002 to 0.005 deg/sec (within ERBS attitude control requirements of 1 deg and 0.0005 deg/sec) can be obtained with minimal tuning of the filter; Replacing the TAM data in the telemetry with simulated TAM data yields corresponding accuracies of 0.1 to 0.2 deg and 0.002 to 0.005 deg/sec, thus demonstrating that the filter's accuracy can be significantly enhanced by further calibrating the TAM. Factors affecting the fillter's accuracy and techniques for tuning the system's Kalman filter are also presented.

Challa, M.↗
NASA NTRS2013

Hydrogen-Enhanced Lunar Oxygen Extraction and Storage Using Only Solar Power

The innovation consists of a thermodynamic system for extracting in situ oxygen vapor from lunar regolith using a solar photovoltaic power source in a reactor, a method for thermally insulating the reactor, a method for protecting the reactor internal components from oxidation by the extracted oxygen, a method for removing unwanted chemical species produced in the reactor from the oxygen vapor, a method for passively storing the oxygen, and a method for releasing high-purity oxygen from storage for lunar use. Lunar oxygen exists in various types of minerals, mostly silicates. The energy required to extract the oxygen from the minerals is 30 to 60 MJ/kg O. Using simple heating, the extraction rate depends on temperature. The minimum temperature is approximately 2,500 K, which is at the upper end of available oven temperatures. The oxygen is released from storage in a purified state, as needed, especially if for human consumption. This method extracts oxygen from regolith by treating the problem as a closed batch cycle system. The innovation works equally well in Earth or Lunar gravity fields, at low partial pressure of oxygen, and makes use of in situ regolith for system insulation. The innovation extracts oxygen from lunar regolith using a method similar to vacuum pyrolysis, but with hydrogen cover gas added stoichiometrically to react with the oxygen as it is produced by radiatively heating regolith to 2,500 K. The hydrogen flows over and through the heating element (HE), protecting it from released oxygen. The H2 O2 heat of reaction is regeneratively recovered to assist the heating process. Lunar regolith is loaded into a large-diameter, low-height pancake reactor powered by photovoltaic cells. The reactor lid contains a 2,500 K HE that radiates downward onto the regolith to heat it and extract oxygen, and is shielded above by a multi-layer tungsten radiation shield. Hydrogen cover gas percolates through the perforated tungsten shielding and HE, preventing oxidation of the shielding and HE, and reacting with the oxygen to form water vapor. The water vapor is filtered through solid regolith to remove unwanted extraction byproducts, and then condensed to a liquid state and stored at 300 to 325 K. Conversion to usable oxygen is achieved by pumping liquid water into a high-pressure electrolyzer, storing the gaseous oxygen at high pressure for use, and diverting the hydrogen back to the reactor or to storage. The results from this design effort show that this oxygen-generating concept can be developed in an efficient system with low specific mass. Advantages include use of regolith as an oxygen source, filter, and thermal insulator. The system can be tested in Earth gravity and can be expected to operate similarly in lunar gravity. The system is scalable, either by increasing the power level and output of a standard module, or by employing multiple modules.

Burton, rodney↗
NASA NTRS1993

High efficiency direct thermal to electric energy conversion from radioisotope decay using selective emitters and spectrally tuned solar cells

Thermophotovoltaic (TPV) systems are attractive possibilities for direct thermal-to-electric energy conversion, but have typically required the use of black body radiators operating at high temperatures. Recent advances in both the understanding and performance of solid rare-earth oxide selective emitters make possible the use of TPV at temperatures as low as 1200K. Both selective emitter and filter system TPV systems are feasible. However, requirements on the filter system are severe in order to attain high efficiency. A thin-film of a rare-earth oxide is one method for producing an efficient, rugged selective emitter. An efficiency of 0.14 and power density of 9.2 W/KG at 1200K is calculated for a hypothetical thin-film neodymia (Nd2O3) selective emitter TPV system that uses radioisotope decay as the thermal energy source.

Chubb, Donald L.↗
NASA NTRS1991

A statistical rain attenuation prediction model with application to the advanced communication technology satellite project. 3: A stochastic rain fade control algorithm for satellite link power via non linear Markow filtering theory

The dynamic and composite nature of propagation impairments that are incurred on Earth-space communications links at frequencies in and above 30/20 GHz Ka band, i.e., rain attenuation, cloud and/or clear air scintillation, etc., combined with the need to counter such degradations after the small link margins have been exceeded, necessitate the use of dynamic statistical identification and prediction processing of the fading signal in order to optimally estimate and predict the levels of each of the deleterious attenuation components. Such requirements are being met in NASA's Advanced Communications Technology Satellite (ACTS) Project by the implementation of optimal processing schemes derived through the use of the Rain Attenuation Prediction Model and nonlinear Markov filtering theory.

Manning, Robert M.↗