Search NASA⌕ Search

SEARCH · Search NASA

Results for “Elastic moduli”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Atomistic insight into the ferroelastic post-stishovite transition by high-pressure single-crystal X-ray diffraction

Abstract The post-stishovite transition is a classic pseudo-proper typed ferroelastic transition with a symmetry-breaking spontaneous strain. This transition has been studied using high-pressure spontaneous strains, optic modes, and elastic moduli (Cij) based on the Landau modeling, but its atomistic information and structural distortion remain poorly understood. Here we have conducted synchrotron single-crystal X-ray diffraction measurements on stishovite crystals up to 75.3 GPa in a diamond-anvil cell. Analysis of the data reveals atomic positions, bond lengths, bond angles, and variations of SiO6 octahedra across the transition at high pressure. Our results show that the O coordinates split at ~51.4 GPa, where the apical and equatorial Si-O bond lengths cross over, the SiO6 octahedral distortion vanishes, and the SiO6 octahedra start to rotate about the c axis. Moreover, distortion mode analysis shows that an in-plane stretching distortion (GM1+ mode) occurs in the stishovite structure at high pressure while a rotational distortion (GM2+ mode) becomes dominant in the post-stishovite structure. These results are used to correlate with elastic moduli and Landau parameters (symmetry-breaking strain e1–e2 and order parameter Q) to provide atomistic insight into the ferroelastic transition. When the bond lengths of two Si-O bonds are equal due to the contribution from the GM1+ stretching mode, C11 converges with C12, and the shear wave VS1[110] polarizing along [110] and propagating along [110] vanishes. Values of e1–e2 and Q are proportional to the SiO6 rotation angle from the occurrence of the GM1+ rotational mode in the post-stishovite structure. Our results on the pseudo-proper type transition are also compared with that for the proper type in albite and improper type in CaSiO3 perovskite. The symmetry-breaking strain, in all these types of transitions, arises as the primary effect from the structural angle (such as SiO6 rotation or lattice constant angle) and its relevant distortion mode in the low-symmetry ferroelastic phase.

Geochemistry & Geophysics↗

Rethinking the magnetic properties of lepidocrocite: A density functional theory and cluster expansion study

The iron oxyhydroxide lepidocrocite (g-FeOOH) is an abundant mineral critical to a number of chemical and technological applications. Of particular interest is the ground state and nite temperature magnetic order, and the subsequent impact this has upon crystal properties. The magnetic properties, investigated in this work are governed primarily through superexchange interactions, and have been calculated using density functional theory and cluster expansion methods. Quantication of these exchange terms has facilitated the determination of the ground state magneto-crystalline structure and subsequent calculation of its lattice constants, elastic moduli, cohesive enthalpy, and electronic density of states. Further, using a collinear magnetic conguration model, the magnetic heat capacity versus temperature has been studied and the Neel temperature obtained.

Pope, Daniel J.↗

Effect of Impurities on the Formation Energy of Point Defects in the γ-TiAl Alloy

The projector augmented-wave method within density functional theory is used to study the effect of 4d elements and Group IIIA and IVA elements on the energetics of point defect formation and elastic moduli of the γ-TiAl alloy. To calculate the point defect formation energy, the grand canonical formalism was used. It is shown that the formation energy of aluminum vacancies decreases by approximately 1.3 eV with increasing its content in the series of alloys Ti{sub 3}Al–TiAl–TiAl{sub 3}, whereas the formation energy of titanium vacancies changes insignificantly. In general, the formation of titanium vacancies in these alloys is preferred to the formation of aluminum vacancies. It has been found that Nb, Mo, Tc, Ru, Rh, and Pd impurities on the aluminum sublattice contribute to an increase in the formation energy of an aluminum vacancies, and Mo and Tc also lead to an increase in the formation energy of titanium vacancies. All 4d impurities, if they substitute for titanium, reduce the formation energy of aluminum vacancies, and Nb and Mo are favorable for increasing the formation energy of titanium vacancies. The influence of impurities on the chemical bond in the γ-TiAl alloy and its elastic moduli and characteristics based on them is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reassessment of Birch's Law on hcp‐Fe From Ultrasonic Sound Velocity Measurement and Implications on the Velocity Profiles of Earth's Inner Core

Here, we performed in situ X-ray diffraction and ultrasonic sound velocity measurements on hcp-Fe up to 15 GPa, 873 K in a multi-anvil apparatus. The elastic moduli and their pressure and temperature derivatives were determined by fitting the velocity and density data to the third-order finite strain equations, yielding K S0 = 169.0(57) GPa, K$^{′}_{S0}$ = 5.4(6), (∂K S /∂T) P = −0.031(3) GPa/K, G 0 = 104.5(27) GPa, G$^{′}_{0}$ = 1.7(2), (∂G/∂T) P = −0.060(2) GPa/K. Within the experimental P-T range, we find significant temperature effect on the density-velocity (ρ − V P or S ) relations and caution the use of the temperature-independent Birch's law for extrapolation to core conditions. Furthermore, temperature-induced velocity decrease is more significant in V S than in V P , offering a possible explanation for the high Poisson's ratio in the core. Extrapolations based on our results together with previous experimental data suggest that V P of hcp-Fe aligns with PREM at Earth's core conditions, while Vs and density are approximately 10% and 2.7% higher than PREM, respectively.

36 MATERIALS SCIENCE↗

Texture evolution, phase transformation and mechanical properties of selective laser melted Ti-13Nb-13Zr

Highlights: • The crystallographic texture orientation of Ti-13Nb-13Zr alloy was tailored. • The evolution of the volume fraction of α′ phase was investigated. • The phase transformation was discussed using TEM/HRTEM observations. • The elastic moduli of α′ and β phases have been calculated. - Abstract: The crystallographic texture and phase composition associated with the performance of materials have been well documented, but there are very few studies on their controlling strategies. In this work, the crystallographic texture orientation and phase transformation of Ti-13Nb-13Zr alloy were tailored for the first time by selective laser melting with different scanning strategies. <011> crystal orientation along the building direction is preferred in sample A (unidirectional scanning along one axis), while <001> is preferred in sample B (unidirectional scanning with a 90° rotation in each layer). The evolution of the volume fraction of α′ phase was investigated using X-ray photoelectron spectroscopy. The results indicated that sample B has the highest content of α′ phasein sample B. The hardness and wear resistance have been studied through nanoindentation and the results turn out that all samples show higher hardness and better wear resistance (hin sample B. The hardness and wear resistance have been studied through nanoindentation and the results turn out that all samples show higher hardness and better wear resistance (higher H{sub d}/E{sub r} and H{sub d}{sup 3}/E{sub r}{sup 2} ratios) than widely used CP Ti. A simple micromechanical model was used to calculate the elastic moduli of α′ and β phases, which were determined to be 151 GPa and 64 GPa, respectively.

36 MATERIALS SCIENCE↗

MechElastic: A Python library for analysis of mechanical and elastic properties of bulk and 2D materials

We report the MechElastic Python package evaluates the mechanical and elastic properties of bulk and 2D materials using the elastic coefficient matrix ( C ij ) obtained from any ab-initio density-functional theory (DFT) code. The current version of this package reads the output of VASP, ABINIT, and Quantum Espresso codes (but it can be easily generalized to any other DFT code) and performs the appropriate post-processing of elastic constants as per the requirement of the user. This program can also detect the input structure's crystal symmetry and test the mechanical stability of all crystal classes using the Born-Huang criteria. Various useful material-specific properties such as elastic moduli, longitudinal and transverse elastic wave velocities, Debye temperature, elastic anisotropy, 2D layer modulus, hardness, Pugh's ratio, Cauchy's pressure, Kleinman's parameter, and Lame's coefficients, can be estimated using this program. Another existing feature of this program is to employ the ELATE package (2016) [29] and plot the spatial variation of several elastic properties such as Poisson's ratio, linear compressibility, shear modulus, and Young's modulus in three dimensions. Further, the MechElastic package can plot the equation of state (EOS) curves for energy and pressure for a variety of EOS models such as Murnaghan, Birch, Birch-Murnaghan, and Vinet, by reading the inputted energy/pressure versus volume data obtained via numerical calculations or experiments. This package is particularly useful for the high-throughput analysis of elastic and mechanical properties of materials.

2D materials↗

Elasticity of hcp cobalt at high pressure and temperature: a quasi-harmonic case

We performed high-resolution inelastic x-ray scattering measurements on a single crystal of hcp cobalt at simultaneous high pressure and high temperature, deriving 4 of the 5 independent elements of the elastic tensor. Our experiments indicate that the elasticity of hcp-Co is well described within the frame of a quasi-harmonic approximation and that anharmonic high-temperature effects on the elastic moduli, sound velocities and elastic anisotropy are minimal at constant density. These results support the validity of the Birch's law and represent an important benchmark for ab initio thermal lattice dynamics and molecular-dynamics simulations.

36 MATERIALS SCIENCE↗

Facet-controlled phase separation in supersaturated Au-Ni nanoparticles upon shape equilibration

Solid-state dewetting is used to fabricate supersaturated, submicron-sized Au-Ni solid solution particles out of thin Au/Ni bilayers by means of a rapid thermal annealing technique. Phase separation in such particles is studied with respect to their equilibrium crystal (or Wulff) shape by subsequent annealing at elevated temperature. It is found that (100) faceting planes of the equilibrated particles are enriched with Ni and (111) faces with Au. Both phases are considered by quantum-mechanical calculations in combination with an error-reduction scheme that was developed to compensate for a missing exchange-correlation potential that would reliably describe both Au and Ni. The observed phase configuration is then related to the minimization of strongly anisotropic elastic energies of Au- and Ni-rich phases and results in a rather unique nanoparticle composite state that is characterized by nearly uniform value of elastic response to epitaxial strains all over the faceted surface. The same conclusion is yielded also by evaluating bi-axial elastic moduli when employing interpolated experimental elastic constants. This work demonstrates a useful route for studying features of physical metallurgy at the mesoscale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Equation of state and strength of diamond in high-pressure ramp loading

Diamond is used extensively as a component in high-energy-density experiments, but existing equation of state (EOS) models do not capture its observed response to dynamic loading. In particular, in contrast with first-principles theoretical models of equilibrium multiphase EOS, no solid-solid phase changes have been detected, and no general-purpose EOS models match the measured ambient isotherm. We have performed density functional theory (DFT) calculations of the diamond phase to ~10 TPa, well beyond its predicted range of thermodynamic stability, and used these results as the basis of a Mie-Grüneisen EOS. We also performed DFT calculations of the elastic moduli, and calibrated an algebraic elasticity model for use in simulations. We then estimated the flow stress of diamond by comparison with the stress-density relation measured experimentally in ramp-loading experiments. Furthermore, the resulting constitutive model allows us to place a constraint on the Taylor-Quinney factor (the fraction of plastic work converted to heat) from the observation that diamond does not melt on ramp compression.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact Cratering Calculations

This research is computational /theoretical and complements the Caltech experimental program. We have developed an understanding of the basic physical processes and produced computational models and implemented these into Eulerian and Lagrangian finite element codes. The key issues we have addressed include the conditions required for: faulting (strain localization), elastic moduli weakening, dynamic weakening (layering elastic instabilities and fluidization), bulking (creation of porosity at zero pressure) and compaction of pores, frictional melting (creation of pseudotachylytes), partial and selective devolatilization of materials (e.g. CaCO3, water/ice mixtures), and debris flows.

Ahrens, Thomas J.↗

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction

In this work, diffraction and single-crystal elastic constants of Inconel 625 have been determined by means of in situ loading at room and elevated temperatures using time-of-flight neutron diffraction. Theoretical models proposed by Voigt, Reuss, and Kroner were used to determine single-crystal elastic constants from measured diffraction elastic constants, with the Kroner model having the best ability to capture experimental data. The magnitude of single-crystal elastic moduli, computed from single-crystal elastic constants, decreases and the single crystal anisotropy increases as temperature increases, indicating the importance of texture in affecting macroscopic stress at elevated temperatures. Finally, the experimental data reported here are of great importance in understanding additive manufacturing of metallic components as: diffraction elastic constants are required for computing residual stresses from residual lattice strains measured using neutron diffraction, which can be used to validate thermomechanical models of additive manufacturing, while single-crystal elastic constants can be used in crystal plasticity modeling, for example, to understand mechanical deformation behavior of additively manufactured components.

36 MATERIALS SCIENCE↗

Resonant ultrasound spectroscopy: The essential toolbox

Resonant Ultrasound Spectroscopy (RUS) is an ultrasound-based minimal-effort high-accuracy elastic modulus measurement technique. RUS as described here uses the mechanical resonances (normal modes of vibration or just modes) of rectangular parallelepiped or cylindrical specimens with a dimension of from a fraction of a millimeter to as large as will fit into the apparatus. Provided here is all that is needed so that the reader can construct and use a state-of-the-art RUS system. Included are links to open-source circuit diagrams, links to download Los Alamos National Laboratory open-source data acquisition software, links to request free analysis software, procedures for acquiring measurements, considerations on building transducers, 3-D printed stage designs, and a full mathematical explanation of how the analysis software extracts elastic moduli from resonances.

47 OTHER INSTRUMENTATION↗

Temperature dependent elastic properties of γ-phase U – 8 wt% Mo

Polycrystalline elastic moduli and stiffness tensor components of γ-phase U – 8 wt% Mo have been determined by resonant ultrasound spectroscopy in the temperature range of 25-650°C. The ambient temperature elastic properties are compared to results measured via other experimental methods and show reasonable agreement, though there is considerable variation of these properties within the literature at both the U – 8 wt% Mo composition and as a function of Mo concentration. The Young’s modulus of U – 8 wt% Mo measured in this study decreases steadily with temperature at a rate that is slower than trends previously observed at similar Mo concentrations, though the difference is not statistically significant. This first measurement of the temperature dependent elastic stiffness tensor of a polycrystalline U-Mo alloy clarifies that the behavior of the Young’s modulus is due to a strongly weakening C 11 polycrystalline stiffness tensor component, along with milder decreases in C 12 and C 44 . The unique partially auxetic properties recently predicted for singlecrystalline U-Mo are discussed in regard to their possible impact on the polycrystalline behavior of the alloy.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

EGS Collab Testbed 1: Baseline Cross-well Seismic

As part of the geophysical characterization suite for the first EGS Collab tesbed, here are the baseline cross-well seismic data and resultant models. The campaign seismic data have been organized, concatenated with geometry and compressional (P-) & and shear (S-) wave picks, and submitted as SGY files. P-wave data were collected and analyzed in both 2D and 3D, while S-wave data were collected and analyzed in 2D only. Inversion models are provided as point volumes; the volumes have been culled to include only the points within source/receiver array coverage. The full models space volumes are also included, if relevant. An AGU 2018 poster by Linneman et al. is included that provides visualizations/descriptions of the cross-well seismic characterization method, elastic moduli calculations, and images of model inversion results.

15 GEOTHERMAL ENERGY↗

Evolution of Intergranular Stresses in a Martensitic and an Austenitic NiTi Wire During Loading–Unloading Tensile Deformation

In situ synchrotron X-ray diffraction testing was carried out on a martensitic and an austenitic NiTi wire to study the evolution of internal stresses and the stress-induced martensite (SIM) phase transformation during room temperature tensile deformation. From the point of lattice strain evolution, it is concluded that (1) for the martensitic NiTi wire, detwinning of the [011](B19') type II twins and the {010}(B19') compound twins is responsible for internal strains formed at the early stage of deformation. (2) The measured diffraction moduli of individual martensite families show large elastic anisotropy and strong influences of texture. (3) For the austenitic NiTi wire, internal residual stresses were produced due to transformation-induced plasticity, which is more likely to occur in austenite families that have higher elastic moduli than their associated martensite families. (4) Plastic deformation was observed in the SIM at higher stresses, which largely decreased the lower plateau stresses.

lattice strain↗

On composites with periodic structure

The overall moduli of a composite with an isotropic elastic matrix containing periodically distributed (anisotropic) inclusions or voids, can be expressed in terms of several infinite series which only depend on the geometry of the inclusions or voids, and hence can be computed once and for all for given geometries. For solids with periodic structures these infinite series play exactly the same role as does Eshelby's tensor for a single inclusion or void in an unbounded elastic medium. For spherical and circular-cylindrical geometries, the required infinite series are calculated and the results are tabulated. These are then used to estimate the overall elastic moduli when either the overall strains or the overall stresses are prescribed, obtaining the same results. These results are compared with other estimates and with experimental data. It is found that the model of composites with periodic structure yields estimates in excellent agreement with the experimental observations.

Nemat-Nasser, S.↗

Accuracy of the Generalized Self-Consistent Method in Modelling the Elastic Behaviour of Periodic Composites

Local stress and strain fields in the unit cell of an infinite, two-dimensional, periodic fibrous lattice have been determined by an integral equation approach. The effect of the fibres is assimilated to an infinite two-dimensional array of fictitious body forces in the matrix constituent phase of the unit cell. By subtracting a volume averaged strain polarization term from the integral equation we effectively embed a finite number of unit cells in a homogenized medium in which the overall stress and strain correspond to the volume averaged stress and strain of the constrained unit cell. This paper demonstrates that the zeroth term in the governing integral equation expansion, which embeds one unit cell in the homogenized medium, corresponds to the generalized self-consistent approximation. By comparing the zeroth term approximation with higher order approximations to the integral equation summation, both the accuracy of the generalized self-consistent composite model and the rate of convergence of the integral summation can be assessed. Two example composites are studied. For a tungsten/copper elastic fibrous composite the generalized self-consistent model is shown to provide accurate, effective, elastic moduli and local field representations. The local elastic transverse stress field within the representative volume element of the generalized self-consistent method is shown to be in error by much larger amounts for a composite with periodically distributed voids, but homogenization leads to a cancelling of errors, and the effective transverse Young's modulus of the voided composite is shown to be in error by only 23% at a void volume fraction of 75%.

Walker, Kevin P.↗

Theoretical investigations of the physical properties of zircon-type YVO{sub 4}

The crystal structure, electronic properties, elastic properties, hardness and thermodynamic properties of the laser host material zircon-type YVO{sub 4} are studied using the pseudopotential plane wave method within the local density approximation (LDA) and generalized gradient approximation (GGA). The calculated ground state values such as lattice parameter, bulk modulus and its pressure derivative, the band structure and densities of states were in favorable agreement with previous works and the existed experimental data. The elastic constants C{sub ij}, the aggregate elastic moduli (B, G, E), Poisson's ratio and elastic anisotropy have been investigated. In YVO{sub 4}, V-O bonds with shorter bond length and larger Mulliken population make great contribution to hardness than Y-O bonds. Using quasi-harmonic Debye model considering the phonon effects, bulk modulus, heat capacity and thermal expansion coefficient of YVO{sub 4} are calculated within a range of 0-6 GPa and 0-1200 K. - Graphical Abstract: (a) Directional dependence of Young's modulus in zircon-type YVO{sub 4} and (b) projections of the directional dependent Young's modulus in different planes for zircon-type YVO{sub 4}. The units are in GPa. Highlights: Black-Right-Pointing-Pointer This paper systematically studied the physical properties of zircon-type YVO{sub 4} from first-principles calculations. Black-Right-Pointing-Pointer Zircon-type YVO{sub 4} is mechanically stable and it is ductile for B/G>1.75 and v>0.26. Black-Right-Pointing-Pointer Universal elastic anisotropy index A{sup U} for zircon-type YVO{sub 4} is 2.41, so YVO{sub 4} is anisotropic. Black-Right-Pointing-Pointer V-O bonds with shorter bond length and larger Mulliken population make greater contribution to the hardness of YVO{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗