Search NASA⌕ Search

SEARCH · Search NASA

Results for “Embedded”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Steady supersonic flowfields with embedded subsonic regions

Supersonic flow past a blunt body is considered, where the flow contains an embedded subsonic region which lies between the shock wave and the body surface and is bounded by sonic lines from the body to the shock. A numerical approach is taken, which uses a basic finite difference scheme that solves the unsteady fluid dynamic equations in integral form. The unsteady equations are everywhere hyperbolic in time so no distinction need be made between subsonic and supersonic regions. Solutions to the mixed elliptic and hyperbolic steady flow equations are approached asymptotically in time. The method is illustrated for two-dimensional flows.

Maccormack, R. W.↗
NASA NTRS1977

The embedded feature model for the interpretation of chromospheric contrast profiles

Contrast profiles obtained from chromospheric filtergrams and spectra of bright and dark mottles have to date been interpreted almost exclusively in terms of Becker's cloud model. Here we demonstrate the failure of this model to account in a physically consistent way for the observed contrasts. As an alternative, we introduce an embedded-feature model, restricting our discussion in this paper to stationary features. Our model is then characterized by three independent parameters: the density of absorbing atoms, the geometrical depth, and the profile of the absorption coefficient. An analytic approximation to the contrast resulting from such a model reproduces well the observed behavior of all types of contrast profiles.

Steinitz, R.↗
NASA NTRS1979

Resonant frequency of microstrip antennas calculated from TE-excitation of an infinite strip embedded in a grounded dielectric slab

The calculation of currents induced by a plane wave normally incident upon an infinite strip embedded in a grounded dielectric slab is used to infer the resonant width (or frequency) of rectangular microstrip antennas. By placing the strip inside the dielectric, the effect of a dielectric cover of the same material as the substrate can be included in the calculation of resonant frequency. A comparison with measured results indicated agreement of 1 percent or better for rectangular microstrip antennas constructed on Teflon-fiberglass substrate.

Bailey, M. C.↗
NASA NTRS1978

Towards complete configurations using an embedded grid approach

A new approach to simulating transonic flow about transport configurations is briefly outlined. The methods embedded grid scheme provides a high degree of computational resolution coupled with geometric flexibility for future applications to complex shapes. Calculations presented illustrate aspects of transonic transport design including fuselage design, determination of wing control surface deflection effectiveness, and wing design.

Boppe, C. W.↗
NASA NTRS1981

A method for computation of inviscid three-dimensional flow over blunt bodies having large embedded subsonic regions

A computational technique for computing the three-dimensional inviscid flow over blunt bodies having large regions of embedded subsonic flow is detailed. Results, which were obtained using the CDC Cyber 203 vector processing computer, are presented for several analytic shapes with some comparison to experimental data. Finally, windward surface pressure computations over the first third of the Space Shuttle vehicle are compared with experimental data for angles of attack between 25 and 45 degrees.

Weilmuenster, K. J.↗
NASA NTRS1982

Singularity embedding method in potential flow calculations

The so-called H-type mesh is used in a finite-element (or finite-volume) calculation of the potential flow past an airfoil. Due to coordinate singularity at the leading edge, a special singular trial function is used for the elements neighboring the leading edge. The results using the special singular elements are compared to those using the regular elements. It is found that the unreasonable pressure distribution obtained by the latter is removed by the embedding of the singular element. Suggestions to extend the present method to transonic cases are given.

Jou, W. H.↗
NASA NTRS1982

High frequency sound emission from moving point multipole sources embedded in arbitrary transversely sheared mean flows

Formulas are derived for the high frequency sound emission from moving point multipole sources embedded in an arbitrary unidirectional transversely sheared mean flow. The results are used to study the sound generated by non-axisymmetric turbulent jets. The effect of the asymmetry in both the mean flow and the source distribution is accounted for by a 'circumferential directivity factor', which is easily calculated from the solution of a second order ordinary differential equation in the general case and from an explicit formula when the mean flow is symmetric but the source location is not. This factor is used to assess the potential of employing asymmetric velocity profiles that redirect the sound upward to reduce the noise radiation below the flight path of a jet aircraft.

Goldstein, M. E.↗
NASA NTRS1982

A transonic rectangular grid embedded panel method

A method is presented that has the potential for solving transonic flow problems about the same complex aircraft configurations currently being analyzed by subsonic panel methods. This method does not require the generation of surface fitted grids. Instead it uses rectangular grids and subgrids together with embedded surface panels on which boundary conditions are imposed. Both the Euler and full potential equations are considered. The method of least squares is used to reduce the solution of these equations to the solution of a sequence of Poisson problems. The Poisson problems are solved using fast Fourier transforms and panel influence coefficient techniques. The overall method is still in its infancy but some two dimensional results are shown illustrating various key features.

Johnson, F. T.↗
NASA NTRS1982

Holographic interferometry of transparent media using light scattered by embedded test objects

Fringe formation and localization in holographic interferometry of transparent media are discussed for configurations in which light enters the medium and is scattered back through it by an embedded diffuse object. Fringe order numbers are doubled, and the fringe localization region is translated and compressed by a factor of two. The results are applicable to tomographic reconstruction of aerodynamic density fields around opaque test objects.

Prikryl, I.↗
NASA NTRS1983

Numerical study of the effect of an embedded surface-heat source on the separation bubble of supersonic flow

A numerical study of the conjugated problem of a separated supersonic flow field and a conductive solid wall with an embedded heat source is presented. Implicit finite-difference schemes were used to solve the two-dimensional time-dependent compressible Navier-Stokes equations and the time-dependent heat-conduction equation for the solid in both general coordinate systems. A detailed comparison between the thin-layer and Navier-Stokes models was made for steady and unsteady supersonic flow and showed insignificant differences. Steady-state and transient cases were computed and the results show that a temperature pulse at the solid-fluid interface can be used to detect the flow direction near the wall in the vicinity of separation without significant distortion of the flow field.

Degani, D.↗
NASA NTRS1984

Embedded gage impact study

Impact damage in graphite/epoxy laminates was characterized and transient strain history during impact was correlated. The material investigated was AS-4/3501-6 graphite/epoxy. Eight-ply and sixteen-ply quasi-isotropic laminates of 45/0/-45/90 sub s and 45/0/-45/90 sub 2s layups were fabricated with strain gages embedded between plies during the strain gages and leads from the highly conductive graphite fibers. The specimens were circular plates 12.7 cm (5 in.) in diameter and clamped along their circumference. The specimens were impacted with a 185 gm impactor, dropped from heights of 1.20 m and 1.65 m. An accelerometer was attached to the back surface of the specimen opposite the impact point and was used to trigger the recording instrumentation. The transient strain data were recorded with an eight channel waveform digitizer capable of sampling data at 0.5 microsec intervals. The data were stored, processed, and plotted by means of a microcomputer. Transient strain data were correlated with results from ultrasonic inspection of the specimens.

Schramm, S. W.↗
NASA NTRS1984

Calculating C-grids with fine and embedded mesh regions

A program for calculating a C-type mesh around airfoil like shapes is described. The Jameson/Caughey approach is used: a parabolic transformation coupled with a shearing transformation. The algebraic algorithm is capable of efficiently generating nearly orthogonal grids. A high degree of grid control is possible. The user may specify grid boundaries, number of grid lines, and location of (and spacing in) trailing edge and leading edge fine mesh areas. The capability of embedding fine mesh regions, for use with new adaptive grid techniques, is being developed. Grids generated by the program were used in Euler flow flow calculatons by W. Usab. Results superior to results calculated on previous O-type grids were obtained. Specifically, calculations converged faster using C-grids rather than 0-grids, total pressure loss spikes at the trailing edge of the airfoil were eliminated, and the Ni method converged with zero artificial smoothing for a subcritical case (resulting overall total pressure loss was then nearly zero). These improvements were attributed to higher grid orthogonality, especially at the trailing edge. The program itself is fairly straightforward. Roughly half of the 800 code lines are comment lines.

Loyd, B.↗
NASA NTRS1984

Dense cores in dark clouds - Young embedded stars at 2 micrometers

Twenty-five visually opaque regions which contain strong sources of NH3 (1,1) line emission (dense cores) have been surveyed for evidence of associated stars at two microns. Five such stars have been found, of which three - in B5, L1489, and L1582 - are optically invisible and probably embedded in their associated cores. The stars in B5 and L1489 have 2-100 micron spectra and luminosity similar to those of HL Tau, a very young T Tauri star. These stars probably formed in the cores where they are now seen. These results tend to confirm earlier suggestions that low-mass stars form in dense cores.

Benson, P. J.↗
NASA NTRS1984

Strain measurement within a single-lap joint using embedded strain gages

An experimental method used to measure the in-plane normal-axial strains produced within a single-lap joint is described in which a resistance-foil strain gage is embedded within the joint prior to curing of the adhesive. Nominal dimensions of the titanium Ti-6-4 adherends were 0.13 x 2.5 x 12.7 cm and an overlap of 2.5 cm was used. The joint was bonded with FM-300 structural adhesive. The average ultimate shear strength of the gaged specimens and control specimens was 16.1 MPa and 14.1 MPa. A significant advantage of the proposed method is that strains internal to the joint are measured, rather than strains at an external edge. The presence of the gage was found to be not detrimental to bond performance.

Tuttle, M. E.↗
NASA NTRS1984

Far-infrared embedding impedance measurements

A technique which allows the measurement of detector embedding impedance has been developed. By using a bismuth microbolometer as a variable resistance load the impedance of one element in a bow-tie antenna array operating at 94 GHz was inferred. The technique is frequency insensitive, and could be used throughout the far-infrared.

Neikirk, D. P.↗
NASA NTRS1984

Heat transfer effects of longitudinal vortices embedded in a turbulent boundary layer

The results of tests with five different vortex generators in an open circuit wind tunnel are reported. The tests were performed to enhance the data base on heat transfer effects of an isolated longitudinal vortex in a turbulent boundary layer and the effects of embedded vortex pairs. A heated plate was set in the boundary layer downstream of a tripping mechanism and measurements were made of the free stream and surface temperatures using thermocouples. A four-hole cobra probe assayed the velocity profiles. Trials revealed that vortex pairs with scales larger than the boundary layer thickness induce significant changes in the Stanton number. A 15 percent Stanton number increase was produced by isolated vortices, which swept cool free stream fluid into the near-wall region.

Eibeck, P. A.↗
NASA NTRS1984

The Epsilon Aurigae secondary - A binary embedded within a disk?

The eclipse characteristics of Epsilon Aurigae, which is an F supergiant in a spectroscopic binary system, imply a secondary that is elongated, measuring about 10 AU by less than 1 AU, with a mass of about 16 solar masses. Recent IR observations, however, indicate a color temperature of about 500 K and a luminosity that is apparently less than 1 percent that of a 16-solar mass star. It is presently suggested that the secondary consists of a close binary embedded in an optically thick disk, which is viewed edge-on. The observed low luminosity of the secondary would then be due to two 8-solar mass stars' luminosity, which is about 10 percent that of a 16-solar mass star, together with the loss of 90 percent of the emitted energy through escape from the poles of the disk. This hypothesis is discussed in relation to radio and UV observations of Epsilon Aurigae.

Lissauer, J. J.↗
NASA NTRS1984

The nature of the embedded population in the Rho Ophiuchi dark cloud - Mid-infrared observations

In combination with previous IR and optical data, the present 10-20 micron observations of previously identified members of the embedded population of the Rho Ophiuchi dark cloud allow determinations to be made of the broadband energy distributions for 32 of the 44 sources. The majority of the sources are found to emit the bulk of their luminosity in the 1-20 micron range, and to be surrounded by dust shells. Because they are, in light of these characteristics, probably premain-sequence in nature, relatively accurate bolometric luminosities for these objects can be obtained through integration of their energy distributions. It is found that 44 percent of the sources are less luminous than the sun, and are among the lowest luminosity premain-sequence/protostellar objects observed to date.

Lada, C. J.↗