Search NASA⌕ Search

SEARCH · Search NASA

Results for “Exclusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Measurement of the Pion Exclusive Electro-Production Cross-Section in the E12-19-006 Experiment in Hall-C at Jefferson Lab

One of the most effective methods for exploring the transition from hadronic degrees of freedom to quark-gluon degrees of freedom in Quantum Chromodynamics (QCD) is through the investigation of \exclusive" pion and kaon electro-production reactions at various Q2 and ?t values. The E12-19-006 experiment is conducted within the confi?nes of experimental Hall C at the Thomas Jefferson National Accelerator Facility, USA, for such studies. The primary aim of the experiment is to ?first enhance our comprehension of the pion electro-production cross-section and its form factor at Q2 = 0.38 and 0.42 GeV2. This is the fi?rst run period of the E12-19-006 experiment which ran in summer 2019. A more profound understanding of the pion electro-production reaction, 1H(e,e'?+)n, at low Q2 is deemed essential to employ this electro-production reaction (an indirect technique) for the high Q2 studies, thereby delving deeper into the realm of QCD. Consequently, this dissertation presents a thorough analysis of the experimental data acquired in the ?first run period of the E12-19-006 experiment. In pursuit of precision, a series of systematic studies (target boiling correction study, the elastic reaction cross-section measurements, study for determining vari- ous kinematics o?sets, etc.) are conducted to discern the accuracy of the analyzed data, a prerequisite for the use of Rosenbluth separation technique to separate the pion electro-production cross-section terms in t bins. The separated pion electro-production cross-section through the Rosenbluth separation technique is then used to extract the pion electromagnetic form factor. In this dissertation, the pion electro-production cross-section is carefully dissected into its four constituent components: longitudinal (?L), transverse (?T ), longitudinal-transverse (?LT ), and transverse-transverse (?TT ), using the full version of Rosenbluth separation technique for the Q2 = 0.38 GeV2. The technique is simultaneously fi?tted to the unseparated pion electro-production cross-sections at the three values of polarization of the virtual photon (?), i.e., ? = 0.286, 0.629 and 0.781. An iterative process is applied to re?ne the parameters of the model cross-sections until the yield ratio of experimental and Monte Carlo simulation converges. In this study, 21 iterations are conducted to re?ne the model cross-section parameters. The fi?nal pion electro-production cross-section terms are then determined for 7 t bins using the optimized parameters of the model cross-sections.

Kumar, Vijay↗
DOE OSTI2024

Exclusive η Electro-Production Beam Spin Asymmetry Measurements using CLAS12 at Jefferson Lab

The exploration of nucleon structure and electromagnetic transitions from ground-state to excited-state is a cornerstone of nuclear physics research. Meson electro-production experiments have opened new avenues for investigating these phenomena, particularly in the 12 GeV era at Jefferson Lab with the CLAS12 spectrometer. The ?N final states, accessible only through isospin resonances I = 1/2, provide a unique tool for studying nucleon excitations. By simplifying the analysis and enabling a cleaner extraction of resonance properties compared to the extensively studied ?N final states, ? electroproduction offers a complementary approach to unraveling the structure of excited nucleons. This work presents the first-ever measurement of the beam spin asymmetry (BSA) in exclusive ? electroproduction, covering a previously unexplored kinematic region with 1.6 ? W ? 2.2 GeV. The BSA is extracted from the CLAS12 data using a comprehensive analysis framework that carefully considers the statistical limitations of the data set. The results are compared to predictions from theoretical models, such as the Jülich-Bonn-Washington (JBW) and MAID, as well as compared to previously published cross-section and spin observable results from CLAS and SLAC. Notably, the extracted BSA exhibits discrepancies with the model predictions, highlighting the potential for refining theoretical descriptions of nucleon resonances and their electromagnetic couplings through the incorporation of these new data. The high precision data obtained in this previously unmeasured kinematic region now serve as valuable input for theorists to refine their models.

Illari, Isabella↗
DOE OSTI2024

Guidance on EPAct section 707 Emergency Repair and Restoration Vehicle Exclusions: EPAct State and Alternative Fuel Provider Fleet Program Guidance Document

Section 707 of the Energy Policy Act of 2005 (EPAct 2005) amended section 301(9)(E) of EPAct 1992 by adding to the list of vehicles excluded from the definition of "fleet" a new subcategory of emergency motor vehicles, i.e., "vehicles directly used in the emergency repair of transmission lines and in the restoration of electricity service following power outages, as determined by the Secretary." Like other excluded vehicles, these light-duty vehicles (LDVs) do not count (1) when determining whether a fleet is covered under the U.S. Department of Energy's (DOE) State and Alternative Fuel Provider Fleet Program (Program), and (2) for fleets that are covered under the Program, when calculating annual alternative fuel vehicle (AFV)-acquisition requirements. If AFV models of excluded vehicles are acquired, however, a fleet may count them toward their acquisition requirement by including them in the calculation of the number of AFVs acquired. Exclusion Process.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
DOE OSTI2024

Cross Section Measurement of Exclusive ¿-Meson Electroproduction off the Proton at CLAS12

This analysis studies the exclusive ¿ meson electroproduction process ep ¿ e 'p ' at CLAS12 in the kinematic region 0.39 = Q2 = 8.38 GeV2 , 1.97 = W = 4.03 GeV, and 0.17 = -t = 7.26 GeV2 . Cross section s(Q2 , W) and differential cross section ds dt (Q2 , W, t) measurements are reported. The scaling of the overall cross section was determined to be 1/Q6.47±0.97, which is consistent with the Generalized Parton Distribution (GPD) prediction of 1/Q6 . The ratios of the longitudinal and transverse cross sections, R = sL sT , are extracted from the angular decay distributions for four values of Q2 and are found to be consistent with the GPD scaling prediction. The mean-square gluonic radius of the proton ¿b 2 ¿g is extracted from the t-dependence of the differential cross sections ds dt in the kinematic region 0.12 = xB = 0.39, the first such measurement in the valence regime.

Moran, Patrick (ORCID:0000000273437292)↗
DOE OSTI2024

Offshore Wind Composite Siting Exclusions Scenarios

This dataset consolidates criteria that restrict the siting of offshore wind energy installations, an update from Zuckerman et al. (2023). All scenarios exclude area from wind energy development due to legal or administrative restrictions (e.g., Marine Protected Areas), existing infrastructure, and technical constraints (e.g., 1,300 m bathymetry limit). A TIF data file and a PNG cartographic map of the data are provided for three scenarios ("Open", "Reference", and "Limited"), showing areas where offshore wind energy is restricted across the contiguous United States. The "Open" scenario only excludes areas with known preclusions for offshore wind deployment. The "Reference" scenario excludes all areas from the "Open" scenario, as well as additional best management practices such as known proposed protected areas, and state waters. The "Limited" scenario excludes all area from the "Reference" scenario. Additionally, it has more stringent siting criteria such as larger setbacks from shore and infrastructure, as well as shallower depth limits on floating technology. For further details and citation, please refer to the publication linked below: Zuckerman, Gabriel R., Anthony Lopez, Travis Williams, Rebecca Green, and Grant Buster. 2023. Impacts of Siting Considerations on Offshore Wind Technical Potential in the United States. Golden, CO: National Renewable Energy Laboratory. NREL/TP-6A20- 85088.

Array↗
DOE OSTI2025

Exclusive photoproduction of excited ρ mesons decaying to four pions in ultraperipheral Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The intense photon fluxes from relativistic nuclei provide an opportunity to study photonuclear interactions in ultraperipheral collisions. In particular, it allows for the investigations of excited, light-flavour vector mesons. The measurement of coherently photoproduced 𝜋⁺𝜋 − 𝜋⁺𝜋 − final states in ultraperipheral Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV is presented for the first time. The cross section, d𝜎/d𝑦, times the branching ratio (𝜌 → 𝜋⁺𝜋⁺𝜋 − 𝜋 − ) is found to be 47.8 ± 2.3 (stat.) ± 7.7 (syst.) mb in the rapidity interval |𝑦| < 0.5. The invariant mass distribution is not well described with a single Breit-Wigner resonance without an interference term. Including in- terference with a non-resonant contribution results in the mass and width values being too far from those reported in PDG, while the production of two interfering resonances, 𝜌(1450) and 𝜌(1700), also provides a good description of the data. The values of the masses (𝑚) and widths (Γ) of the resonances extracted from the fit assuming two interfering resonances are 𝑚₁ = 1385 ± 14 (stat.) ± 3 (syst.) MeV/𝑐², Γ₁ = 431 ± 36 (stat.) ± 82 (syst.) MeV/𝑐², 𝑚₂ = 1663 ± 13 (stat.) ± 22 (syst.) MeV/𝑐² and Γ₂ = 357 ± 31 (stat.) ± 49 (syst.) MeV/𝑐², respectively. The measured cross sections times the branching ratios are compared to recent theoretical predictions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Critical Roles of Chalcogenide Anion on Strengthening Stability of Ni 2 Mo 6 Te 8 for Almost Exclusive Electrocatalysts Nitrate to Ammonia Conversion

Electrochemical hydrogenation of nitrate to ammonia using renewable electricity is a promising route for sustainability but lacks catalysts that can deliver balanced selectivity, activity, and durability. For this work, a new family of noble metal-free and high-performing Chevrel phase Ni 2 Mo 6 T 8 (T = S, Se, and Te) catalysts that have similar structural and textural properties and differ presumably only in chalcogenide anion is systematically studied. The side-by-side comparisons allow the uncovering of the critical roles of chalcogenide anions in impacting kinetic activities and long-term durability. The incorporation of anions with larger size and smaller electronegativity from sulfide to selenide and telluride invokes stronger inhibition of the otherwise competing hydrogen evolution reaction (HER) and steers the hydrogenation toward the selective formation of ammonia, thus improving both Faradic selectivity and the turnover frequency to high levels of 99.4% and 21.5 s –1 , respectively, on the Ni 2 Mo 6 Te 8 catalyst. More significantly, the bulkier anion in the Ni 2 Mo 6 T 8 catalyst kinetically inhibited the intercalation of electrolyte cations, a major degradation mechanism in the catalyst family examined here and delivered several times improved durability. Therefore, this study introduces novel active motifs for selective nitrate reduction and provides insights into the catalyst degradation mechanism and practical ways to improve durability.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Abstract Metal–organic frameworks (MOFs) have been proposed as a promising material for non‐thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc‐based MOF containing a three‐dimensional (3D) linker, bicyclo[2.2.2]octane‐1,4‐dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well‐defined pore apertures/channels with sub‐Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi‐component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn‐based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

Lal, Bhajan↗
DOE OSTI2023

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Metal–organic frameworks (MOFs) have been proposed as a promising material for non-thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc-based MOF containing a three-dimensional (3D) linker, bicyclo[2.2.2]octane-1,4-dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well-defined pore apertures/channels with sub-Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi-component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn-based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Two-loop radiative jet function for exclusive B-meson and Higgs decays

The rare radiative B -meson decay \( {B}^{-}\to \gamma {\mathrm{\ell}}^{-}\overline{v} \) and the radiative Higgs-boson decay h → γγ mediated by light-quark loops both receive large logarithmic corrections in QCD, which can be resummed using factorization theorems derived in soft-collinear effective theory. In these factorization theorems the same radiative jet function appears, which is a central object in the study of factorization beyond the leading order in scale ratios. We calculate this function at two-loop order both in momentum space and in a dual space, where its renormalization-group evolution takes on a simpler form. We also derive the two-loop anomalous dimension of the jet function and present the exact solution to its evolution equation at two-loop order. Another important outcome of our analysis is the explicit form of the two-loop anomalous dimension of the B -meson light-cone distribution amplitude in momentum space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Pore-scale evidence of ion exclusion during methane hydrate growth and evolution of hydrate pore-habit in sandy sediments

Hydrate-bearing sediments constitute complex hydrological systems, within which the pore habit of hydrate significantly affects all physical properties. However, there is scarce pore-scale evidence of the evolution of hydrate growth in porous media and the influence of water salinity in the micro-morphology of hydrate. In this paper, we used X-ray computed micro-tomography (CT) to monitor three experiments of methane hydrate growth in sand partially saturated with either NaBr or KI brine under excess-gas conditions. Gas, brine and hydrate are observed to co-exist at the pore-scale during the evolution of hydrate pore-habit towards three-phase equilibrium. The experiments and data analysis reveal that (1) hydrate forms as a porous medium mixed with inclusions of brine and gas, where hydrate and brine evolve gradually into separate phases as hydrate cages exclude salt ions, (2) hydrate growth mobilizes water over fairly long distances resulting in heterogeneous hydrate distribution, and (3) hydrate can exhibit interconnecting pore-habit at local hydrate saturations higher than ~50%, even if grown under excess-gas conditions. The results imply that hydrate micro-morphology and pore habit evolve during hydrate formation and, we suggest, so do the physical properties of hydrate-bearing sediments. Furthermore, our findings provide new insights into the micro-morphology of hydrate and evolution of the properties of hydrate-bearing sediments synthesized in the laboratory and in natural systems.

Clathrate hydrate↗
DOE OSTI2022

Novel Rosenbluth extraction framework for Compton form factors from deeply virtual exclusive experiments

We use a generalization of the Rosenbluth separation method for a model independent simultaneous extraction of the Compton Form Factors $\mathscr{H}$ and $\mathscr{E}$ from virtual Compton scattering data on an unpolarized target. A precise evaluation of $\mathscr{H}$ and $\mathscr{E}$ enabled by the proposed method, is the first step towards pinning down the distribution of angular momentum inside the proton.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗