Search NASA⌕ Search

SEARCH · Search NASA

Results for “Explainability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A Detailed Reaction Mechanism for Thiosulfate Oxidation by Ozone in Aqueous Environments

The ozone oxidation, or ozonation, of thiosulfate is an important reaction for wastewater processing, where it is used for remediation of mining effluents, and for studying aerosol chemistry, where its fast reaction rate makes it an excellent model reaction. Although thiosulfate ozonation has been studied since the 1950s, challenges remain in developing a realistic reaction mechanism that can satisfactorily account for all observed products with a sequence of elementary reaction steps. Here, we present novel measurements using trapped microdroplets to study the pH-dependent thiosulfate ozonation kinetics. We detect known products and intermediates, including SO32-, SO42-, S3O62-, and S4O62-, establishing agreement with the literature. However, we identify S2O42- as a new reaction intermediate and find that the currently accepted mechanism does not directly explain observed pH effects. Thus, we develop a new mechanism, which incorporates S2O42- as an intermediate and uses elementary steps to explain the pH dependence of thiosulfate ozonation. The proposed mechanism is tested using a kinetic model benchmarked to the experiments presented here, then compared to literature data. We demonstrate good agreement between the proposed thiosulfate ozonation mechanism and experiments, suggesting that the insights in this paper can be leveraged in wastewater treatment and in understanding potential climate impacts.

Deal, Alexandra M↗
DOE OSTI2025

Integrating Contaminant Source Indicators, Water Quality Measures, and Ecotoxicity to Characterize Contaminant Mixtures and Per- and Polyfluoroalkyl Substance (PFAS) Variability in an Urban Watershed

Thousands of chemical contaminants threaten watersheds but are time and cost prohibitive to monitor. Identifying their sources, transport, and ecological risk is limited in heterogeneous urban watersheds. We present an integrative watershed approach using source-specific indicator compounds, common water quality measures, and ecotoxicity assays to examine the distribution of contaminant mixtures in an urbanized watershed. Indicator compound concentrations were temporally and spatially distributed for treated/untreated sewage (sucralose, artificial sweetener), road runoff (diphenyl-guanidine [DPG] and 6PPD-quinone [6PPD-Q], automobile tire additives), and lawncare runoff (aminomethanephosphonic acid (AMPA), major degradant of the herbicide glyphosate). Sucralose was predominately sourced from treated wastewater; measurable concentrations in tributaries indicated raw sewage inputs. DPG and 6PPD-Q concentrations correlated to road density during base flow and were elevated during stormflow. AMPA was measurable spring through fall, especially where lawns were dense. When specific sources dominated flow, water quality measures correlated with wastewater (sulfate, potassium, chloride, and sodium) and road runoff (chromium and lead) indicators. The limited behavioral toxicity observed in exposed zebrafish (Danio rerio) (18%) was not well explained by source-indicators. PFAS concentrations were highly variable spatially but not well explained by our source-specific indicator compounds. Here, more costly compound-specific monitoring may be necessary when multiple sources exist or when unexpected toxicity trends occur.

computer simulations↗
DOE OSTI2025

Energetic and Electronic Properties of AcX and LaX (X = O and F)

The bonding and spectroscopic properties of LaX and AcX (X = O and F) diatomic molecules were studied by highlevel ab initio CCSD(T) and SO-CASPT2 electronic structure calculations. Bond dissociation energies (BDEs) were calculated at the Feller−Peterson−Dixon (FPD) level. Potential energy curves and spectroscopic constants for the lowest-lying spin−orbit Ω states were obtained at the SO-CASPT2/aQ-DK level. A dense manifold of excited states was described for the monofluorides with the ground states well separated from the excited states. The spectroscopic parameters were in good agreement with those reported experimentally for LaO and LaF. For the diatomic molecules containing actinides, no experimental data of these parameters was found, but the results were consistent with other high-level calculations. The BDEs calculated at the FPD level were 791.3 (LaO), 705.2 (AcO), 650.0 (LaF), and 678.6 (AcF) kJ/ mol. The NBO analysis showed that the monofluorides are essentially ionic, which explains why the BDE(AcF) is higher than BDE(LaF); for the monoxides, covalent contributions involving the d orbitals of the metal and the p orbitals of the oxygen are stronger for LaO than AcO, which explains the higher BDE for LaO. Finally, the bond orders are predicted to be 2 for LaF and AcF, 3 for AcO, and higher than 3 for LaO.

Basis sets↗
DOE OSTI2025

Modeling Pb(II) Adsorption on Mineral Surfaces: Bridging Density Functional Theory and Experiment with Thermodynamic Insights

Despite decades of work on aqueous lead (Pb) adsorption on a-Fe2O3 (hematite) and a-Al2O3 (alumina), gaps between measurements and modeling obscure molecular-level understanding. Achieving well-matched geometries between theory and experimental for mineral-water interfaces is a hurdle, as surface functional group type and distribution must be accounted for in determining mechanisms. Additionally, computational methods that can describe the substrate are often not appropriate to capture aqueous effects. Progress requires focusing on well-studied and relevant systems, such as key facets (001),(012), and (110) of hematite and alumina, and ubiquitous contaminants such as aqueous Pb. In the past, bulk-parametrized bond-valence principles were used to rationalize Pb(II) adsorption trends. These approaches can break down at surfaces, where flexible bonding environments and adsorption-induced surface relaxations play a critical role. Here, we adapt and apply a density functional theory (DFT) and thermodynamics framework, integrating DFT-calculated energies with experimental data and electrochemical principles, to predict Pb(II) adsorption. Our model results capture trends across the full set of surfaces and predict that inner-sphere Pb(II) sorption on (001) alumina varies from unfavorable to weakly favorable across a range of pH conditions. This aligns with experiment insights that Pb(II) interacts at that surface through outer-sphere interactions. Extending to Fe(II) adsorption, we demonstrate a coverage-dependent site preference, potentially explaining disorder in overlayers grown by the oxidative adsorption of Fe(II) on hematite (001).

lead contamination↗
DOE OSTI2026

Ripening of Rh Nanoparticle Catalysts in Reverse Water–Gas Shift via a Data-Driven Model Combining Physics, Theory, and Experiment

Degradation via sintering is an ongoing challenge that impedes the broad commercial success of supported metallic nanoparticle catalysts. To mitigate degradation via informed catalyst design and process operations, here we aim to disambiguate the underlying mechanisms of sintering by combining theory and experiment in a quantitative framework. While mechanistic sintering models exist, they only model a single sintering pathway, even though multiple sintering mechanisms can occur simultaneously or dominate at different stages of the process. Data-driven machine learning models have emerged as a means to represent complex processes through data regression. However, machine learning models have very large data needs and lack mechanistic insights due to their black-box encoding. To develop an interpretive model of catalyst degradation via sintering, we constructed a hybrid model combining mechanistic “physics-based” models and data-driven methods to obtain both reliable predictions and mechanistic insights regarding experimentally observed sintering phenomena. Focusing on nanoparticle sintering in the Rh–TiO 2 catalyst for the reverse water–gas shift (RWGS) reaction, the hybrid model couples a mechanistic term for Ostwald ripening with energy values calculated via density functional theory (DFT) with a parametric, data-driven discrepancy function term for unmodeled mechanisms. The hybrid model is trained using Bayesian inference with data collected from small-angle X-ray scattering (SAXS) in situ experiments wherein average nanoparticle diameter versus time was measured at three relevant operating temperatures. The calibrated hybrid model results show that an Ostwald ripening-only model parameterized with fixed DFT energies does not fully capture the time and temperature dependence of the SAXS-observed sintering kinetics, and that an additional functional contribution, or DFT energy calibration, is required to reconcile simulation and experiment. Analysis of the hybrid-model error confirms that the hybrid model outperforms both the purely mechanistic and purely data-driven alternatives in terms of expected predictive accuracy for time-evolving average particle sizes. Furthermore, the results support the hypothesis that the Ostwald ripening mechanism is less important for explaining the sintering phenomena as operating temperature increases under an assumed fixed DFT parameterization. This could be explained in one of two ways: either latent, unmodeled sintering mechanisms dominate at higher temperatures, or the DFT uncertainty increases with temperature. The proposed modeling approach directly links theory to experiments and simulations via a statistical hybrid modeling framework and can be extended to other catalytic systems to improve predictive models and mechanistic understanding.

Bayesian hybrid modeling↗
DOE OSTI2025

Unequal {110} Facets: The Potential Role of Intraparticle Heterogeneity and Facet Termination in Photoelectrochemical Activity of Single BiVO 4 Particles

BiVO 4 photoanodes are promising for solar water splitting, with photogenerated electrons and holes preferentially reacting at top {010} and lateral {110} facets, respectively. However, the mechanisms driving this facet-dependent reactivity remain unclear. Here, in this study, we investigate facet-dependent photocurrent and material heterogeneity using correlative scanning photoelectrochemical microscopy (SPCM), electron beam induced current (EBIC) mapping, and mid-IR scattering scanning near-field optical microscopy (s-SNOM). SPCM measurements of 62 BiVO 4 particles confirmed higher photocurrents at lateral {110} facets compared to top {010} facets, but unexpectedly revealed variations in photocurrent among lateral facets within the same particle. Variations in lateral facet surface termination could explain the intraparticle-level reactivity heterogeneity, consistent with theoretical predictions. Nano-FTIR spectroscopy and Raman microspectroscopy indicated significant materials chemistry heterogeneity within individual particles and facets that could be attributed to variations in lattice vibration distortions that enhance the overlap between Bi 6s and O 2p orbitals. The increased orbital overlap is significant as it potentially increases hole mobility in the valence band and potentially explains the lateral facet-dependent charge separation efficiency observed in photocurrent maps. Facet-dependent electrical and EBIC measurements showed no space charge regions at interfacet junctions or metal-BiVO 4 contacts under vacuum, suggesting that photogenerated holes beneath top {010} facets are unlikely to transport to lateral {110} facets to drive water/sulfite oxidation. These findings indicate the potential influence of distinct bulk properties and surface termination chemistries across different particles and facets, highlighting the importance of carefully controlling defects and surface chemistry during sample growth to optimize photocatalytic performance.

BiVO4↗
DOE OSTI2025

Substituent and Heteroatom Effects on π–π Interactions: Evidence That Parallel-Displaced π-Stacking is Not Driven by Quadrupolar Electrostatics

Stacking interactions are a recurring motif in supramolecular chemistry and biochemistry, where a persistent theme is a preference for parallel-displaced aromatic rings rather than face-to-face π-stacking. This is usually explained in terms of quadrupole–quadrupole interactions between the arene moieties but that interpretation is inconsistent with accurate calculations, which reveal that the quadrupolar picture is qualitatively wrong. At typical π-stacking distances, quadrupolar electrostatics may differ in sign from an exact calculation based on charge densities of the interacting arenes. We apply symmetry-adapted perturbation theory to dimers composed of substituted benzene and various aromatic heterocycles, which display a wide range of electrostatic interactions, and we investigate the interplay of Pauli repulsion, dispersion, and electrostatics as it pertains to parallel-displaced π-stacking. Profiles of energy components along cofacial slip-stacking coordinates support a prominent role for the “van der Waals model” (dispersion in competition with Pauli repulsion), even for polar monomers where electrostatic interactions are significant. While electrostatic interactions are necessary to explain the optimal face-to-face π-stacking distance and to account for the relative orientation of one polar arene with respect to another, we find no evidence to support continued invocation of quadrupolar electrostatics as a basis for π-stacking. Our results suggest that a driving force for offset-stacking exists even in the absence of electrostatic interactions. Consequently, tuning electrostatics via functionalization does not guarantee that slip-stacking can be avoided. This has implications for rational design of soft materials and other supramolecular architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Combining Theory and Experiment to Map the Atomic-Level Structure–Energy Pathways of Adsorbate-Mediated Phase Changes in a Cooperatively Flexible Metal–Organic Framework

An important subclass of metal–organic frameworks (MOFs) exhibits cooperative flexibility, wherein individual crystallites undergo global structural phase changes in response to external stimuli. Where cooperative flexibility results in reversible changes between crystalline states of distinct accessible porosity, these frameworks can exhibit rare yet desirable behaviors that cannot be explained by local dynamics alone. Yet, the chemical and structural origins of cooperative flexibility and how frameworks undergo these reversible phase changes at the atomic level remain poorly understood. Deliberate design for specific applications is therefore exceedingly difficult, and there is great impetus to develop a fundamental understanding of this phenomenon. Here, an effective and widely accessible computational approach is developed, which is designed to provide microscopic resolution via direct comparison to experimental data along the desorption-guided pathway. The strategy is applied to explain the desorption-induced phase change in an experimentally well-characterized framework, CdIF-13 (sod-Cd(benzimidazolate)2), where experiment alone was unable to resolve the atomistically detailed phase change landscape. Our findings reveal that the cooperative phase change pathways are adsorbate dependent with thermodynamics of intermediate structural states dictated by a nuanced interplay of ligand orientation, skeletal symmetry, and modes of surface adsorption. The results reveal that this isotropically flexible framework is “chaperoned” through a complex energy landscape by specific adsorbates, revealed by the reported computational approach with atomic-level insight and validated by experimentally determined structures. Thus, this work facilitates both understanding and future design of flexible materials for applications in gas storage, transport, delivery, and separation technologies.

03 NATURAL GAS↗
DOE OSTI2025

Unveiling the Origin of Morphological Instability in Topologically Complex Electrocatalytic Nanostructures

Coarsening and degradation phenomena in metals have largely focused on thermally driven processes, such as bulk and surface diffusion. However, dramatic coarsening has been reported in high-surface-area, nanometer-sized Pt-based catalysts during potential cycling in an electrolyte at room temperature─a temperature too low for the process to be explained purely by surface mobility values measured in both vacuum and electrolytes (∼10 –22 and ∼10 –18 cm 2 /s, respectively). This morphological evolution must be due to a different mechanism for mass transport that is sensitive to electrochemical conditions (e.g., electrolyte composition, potential limits, and scan rate). However, there have been no notable studies of electrochemically induced coarsening in nanometer-sized electrocatalysts. Here, we unveil the origins of coarsening in an electrolyte through coupled in situ experiments and atomistic kinetic Monte Carlo (kMC) simulations. Our work demonstrates electrochemical coarsening is driven by two concurrent mechanisms that can be explained at the atomistic level: (i) dissolution/redeposition during the reduction of an oxidized species and (ii) rapid surface diffusion of undercoordinated atoms.

gold↗
DOE OSTI2025

Understanding the Competition between Alcohol Formation and Dimerization during Electrochemical Reduction of Aromatic Carbonyl Compounds

The electrochemical reductive dimerization of small aromatic carbonyl compounds derived from lignocellulosic biomass is a crucial C−C coupling reaction for upgrading small molecules to longchain hydrocarbons, particularly in the synthesis of drop-in sustainable aviation fuels. Although other electrochemical reduction reactions of these reactants (i.e., hydrogenation and hydrogenolysis) have undergone extensive mechanistic investigation, the understanding of dimerization remains relatively underdeveloped. Most importantly, there is a lack of understanding of the selectivity-determining step between dimerization and monomer reduction and critical factors that can affect this step. In this study, we provide a comprehensive mechanistic model to explain the competition between dimerization and monomer reduction of benzaldehyde under various conditions. Our model proposes that the selectivity between dimerization and monomer reduction depends on the competition between desorption of a ketyl radical from the electrode, necessary for dimerization, and further reduction of the ketyl radical to an alcohol on the electrode by proton-coupled electron transfer (PCET). Computationally comparing the adsorption/desorption energy and PCET activation barrier energy is challenging because conventional DFT calculations substantially underestimate the PCET kinetic barriers. In this study, we employed constrained DFTbased configuration interaction (CDFT-CI) to obtain a reliable comparison of these energies. Our mechanistic model was tested and supported by experimental results obtained with four electrodes (Cu, Pb, Bi, graphite), three pH conditions (acidic, neutral, basic), and three potentials. Our study offers a coherent mechanistic foundation that can explain how each of these conditions impacts the desorption and PCET processes and the selectivities for dimerization and alcohol production.

09 BIOMASS FUELS↗
DOE OSTI2024

A New Coupled Biogeochemical Modeling Approach Provides Accurate Predictions of Methane and Carbon Dioxide Fluxes Across Diverse Tidal Wetlands

Abstract Tidal wetlands provide valuable ecosystem services, including storing large amounts of carbon. However, the net exchanges of carbon dioxide (CO 2 ) and methane (CH 4 ) in tidal wetlands are highly uncertain. While several biogeochemical models can operate in tidal wetlands, they have yet to be parameterized and validated against high‐frequency, ecosystem‐scale CO 2 and CH 4 flux measurements across diverse sites. We paired the Cohort Marsh Equilibrium Model (CMEM) with a version of the PEPRMT model called PEPRMT‐Tidal, which considers the effects of water table height, sulfate, and nitrate availability on CO 2 and CH 4 emissions. Using a model‐data fusion approach, we parameterized the model with three sites and validated it with two independent sites, with representation from the three marine coasts of North America. Gross primary productivity (GPP) and ecosystem respiration (R eco ) modules explained, on average, 73% of the variation in CO 2 exchange with low model error (normalized root mean square error (nRMSE) <1). The CH 4 module also explained the majority of variance in CH 4 emissions in validation sites ( R 2 = 0.54; nRMSE = 1.15). The PEPRMT‐Tidal‐CMEM model coupling is a key advance toward constraining estimates of greenhouse gas emissions across diverse North American tidal wetlands. Further analyses of model error and case studies during changing salinity conditions guide future modeling efforts regarding four main processes: (a) the influence of salinity and nitrate on GPP, (b) the influence of laterally transported dissolved inorganic C on R eco , (c) heterogeneous sulfate availability and methylotrophic methanogenesis impacts on surface CH 4 emissions, and (d) CH 4 responses to non‐periodic changes in salinity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Test of Functional Balance Theory for Wetland Biomass Allocation in a Global Change Experiment

Abstract Forecasts of root growth and carbon sequestration under global change are compromised by uncertainty in how plants will allocate biomass between above and belowground pools. Here, we develop a simple model to assess whether functional balance theory can explain a complex biomass allocation response observed in a brackish marsh under experimental warming and elevated CO 2 . Our model shows how treatment‐driven changes in nitrogen supply and demand can explain divergent observations of root growth (i.e., maximum responses under intermediate warming and elevated CO 2 ). The model also reveals a surprising interaction between warming and eutrophication, where enhanced N loading to coastal marshes may reduce adverse impacts of warming on root growth. Our findings provide a mechanistic basis for incorporating biomass allocation into forecast models of marsh evolution. They also provide a general example of using ecological theory to decompose complex net responses observed in multi‐factor global change experiments into constituent processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Velocity Dependence of Rate‐And‐State Friction in Granular Fault Gouge and Implications for Slow‐Slip Events

Abstract The standard rate‐and‐state friction (RSF) has extensively captured frictional behaviors, but it fails to explain the velocity dependence of frictional stability transition and widespread slow‐slip events (SSEs) in experiments and nature adequately. An alternative microphysical Chen‐Niemeijer‐Spiers (CNS) model can well describe the velocity dependence of frictional behaviors of granular gouges. Using the original CNS model, standard RSF parameters can be quantified microphysically. However, some micro‐parameters are not easy to estimate quantitatively, making it difficult to extrapolate to natural and experimental conditions. Here, we simplify the microphysically‐derived RSF parameters including direct effect a , evolution effect b , and critical slip distance D c , as well as equivalent values ( a eq , b eq , and D eq ). The simplified friction parameters directly illustrate their velocity dependence, namely the essentially constant a , a eq , and D c , negatively velocity‐dependent b and b eq , as well as varying D eq for different laws. They are roughly consistent with experimental results in various fault gouges. A modified CNS model is further derived from the original CNS model, establishing a direct link between the standard RSF and CNS models. The modified CNS model exhibits virtually identical frictional behaviors to the original CNS, but differs from the standard RSF at large velocity perturbations. Moreover, the linearized stability analysis indicates that the critical stiffness for the modified CNS model is velocity‐dependent. Compared with the standard RSF, the modified CNS model not only explains the velocity dependence of frictional stability transition, but also exhibits a more gradual transition for SSEs with a broader range of stiffness ratios.

Geochemistry & Geophysics↗
DOE OSTI2025

Downward Convective Moisture Transport Dominated by a Few Overshooting Clouds in Marine and Continental Shallow Convection

Abstract In a previous study (Xiao et al., 2023, https://doi.org/10.1029/2022ms003526 ), we found that ignoring the moist convective downdrafts associated with overshooting clouds in parameterizations can lead to significant biases in the simulated depth and liquid water content of a shallow cloud layer. In this study, we seek to better quantify the properties of the clouds responsible for these moist downdrafts to help improve shallow convection parameterizations. We apply a 3‐D cloud‐tracking algorithm to large‐eddy simulations (LESs) of marine and continental shallow convection. We find that top 1% and 2% of the tracked cloud population ranked by lifetime‐mean cloud‐base mass flux can explain 90%–95% of the total downward moisture transport in the upper cloud layer whereas top 10%–20% is required to explain 90%–95% of the total upward moisture transport near mean cloud base. The vertical structure of the clouds in the top 1% and 2% (the overshooting “deep mode”) is also distinctively different from that of the rest of the cloud population (the “shallow mode”). Shallow convection parameterizations need to capture accurately the properties and convective transports of the clouds in both the deep and shallow modes. To do that, our results suggest that mass‐flux parameterizations need to (a) accurately predict the size and number of the deep‐mode clouds and (b) explicitly represent overshooting cloud updrafts and associated moist downdrafts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Understanding the Recent Increase in Landfalling Tropical Cyclones Over Florida's Gulf Coast

Unlike Florida's Atlantic Coast, the Gulf Coast of Florida has seen heightened tropical cyclone (TC) activity in recent decades with several destructive landfalls. Here, we attempt to understand this regional contrast using a suite of observations for the period 1979–2024. First, we demonstrate that while the El Niño Southern Oscillation (ENSO), the Atlantic Multidecadal Oscillation (AMO) and the North Atlantic Oscillation (NAO) can explain ~23% of the interannual variability in landfalls over the Gulf Coast, the variance explained by them for the Atlantic Coast is statistically insignificant. Next, we show that this striking difference may be attributed to the regional patterns of wind shear, steering flow and air-sea thermodynamic state excited by those modes of variability. The differential control exerted by ENSO, AMO, and NAO on landfalling Florida TCs, in combination with decadal trends in those modes, is likely responsible for the observed increases in landfalls over Florida's Gulf Coast.

Florida↗
DOE OSTI2025

Outer Radiation Belt Dynamics During the October 2012 Storm Revisited: Rapid Inward Radial Transport From a Dynamic Outer Boundary

Earth's outer radiation belt electron flux is highly variable and can be enhanced by over an order of magnitude over timescales less than one day, as observed during the October 2012 storm. Previous studies of this storm (e.g., Reeves et al., 2013, https://doi.org/10.1126/science.1237743) have invoked local acceleration to explain this. However, here, we argue that the observations can instead be explained by fast inward radial transport. One method often invoked to distinguish between these two acceleration processes is the existence of local peaks in electron phase space density (PSD) as a function of L* at fixed first, M, and second, K, adiabatic invariants. However, this method relies on the assumption that the evolution of the PSD as a function of L* occurs over timescales slower than the satellite orbital period. Here, high spatiotemporal resolution data from the Global Positioning System (GPS) spacecraft constellation is used to show that enhancements in the PSD occur during the October 2012 storm over short timescales not resolvable by the Van Allen Probes. In addition, Geostationary Operational Environmental Satellite spacecraft data also indicate that these enhancements are consistent with relativistic electron injections. A radial diffusion model is shown to reproduce the PSD dynamics observed by the Van Allen Probes, once rapid variations at the simulation outer boundary are included, consistent with GPS data. This verifies that apparently “locally growing” peaks in PSD along high apogee satellite orbits can be produced by fast inward radial transport without requiring the action of any local acceleration processes.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

The Role of Dislocations in the Anelasticity of the Upper Mantle

Dislocation‐based dissipation mechanisms potentially control the viscoelastic response of Earth's upper mantle across a variety of geodynamic contexts, including glacial isostatic adjustment, postseismic creep, and seismic‐wave attenuation. However, there is no consensus on which dislocation‐based, microphysical process controls the viscoelastic behavior of the upper mantle. Although both intergranular (plastic anisotropy) and intragranular (backstress) mechanisms have been proposed, there is currently insufficient laboratory data to discriminate between those mechanisms. Here, we present the results of forced‐oscillation experiments in a deformation‐DIA apparatus at confining pressures of 3–7 GPa and temperatures of 298–1370 K. Our experiments tested the viscoelastic response of polycrystalline olivine—the main constituent of the upper mantle—at stress amplitudes from 70 to 2,800 MPa. Mechanical data are complemented by microstructural analyses of grain size, crystallographic preferred orientation, and dislocation density. We observe amplitude‐ and frequency‐dependent attenuation and modulus relaxation and find that numerical solutions of the backstress model match our results well. Therefore, we argue that interactions among dislocations, rather than intergranular processes (e.g., plastic anisotropy or grain boundary sliding), control the viscoelastic behavior of polycrystalline olivine in our experiments. In addition, we present a linearized version of the constitutive equations of the backstress model and extrapolate it to conditions typical of seismic‐wave propagation in the upper mantle. Our extrapolation demonstrates that the backstress model can explain the magnitude of seismic‐wave attenuation in the upper mantle, although some modification is required to explain the weak frequency dependence of attenuation observed in nature and in previous experimental work.

Hein, Diede [Univ. of Minnesota, Minneapolis, MN (↗
DOE OSTI2025

Model-free estimation of completeness, uncertainties, and outliers in atomistic machine learning using information theory

Abstract An accurate description of information is relevant for a range of problems in atomistic machine learning (ML), such as crafting training sets, performing uncertainty quantification (UQ), or extracting physical insights from large datasets. However, atomistic ML often relies on unsupervised learning or model predictions to analyze information contents from simulation or training data. Here, we introduce a theoretical framework that provides a rigorous, model-free tool to quantify information contents in atomistic simulations. We demonstrate that the information entropy of a distribution of atom-centered environments explains known heuristics in ML potential developments, from training set sizes to dataset optimality. Using this tool, we propose a model-free UQ method that reliably predicts epistemic uncertainty and detects out-of-distribution samples, including rare events in systems such as nucleation. This method provides a general tool for data-driven atomistic modeling and combines efforts in ML, simulations, and physical explainability.

36 MATERIALS SCIENCE↗