Search NASA⌕ Search

SEARCH · Search NASA

Results for “Extended targets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Human TRPV1 structure and inhibition by the analgesic SB-366791

Pain therapy has remained conceptually stagnant since the opioid crisis, which highlighted the dangers of treating pain with opioids. An alternative addiction-free strategy to conventional painkiller-based treatment is targeting receptors at the origin of the pain pathway, such as transient receptor potential (TRP) ion channels. Thus, a founding member of the vanilloid subfamily of TRP channels, TRPV1, represents one of the most sought-after pain therapy targets. The need for selective TRPV1 inhibitors extends beyond pain treatment, to other diseases associated with this channel, including psychiatric disorders. Here we report the cryo-electron microscopy structures of human TRPV1 in the apo state and in complex with the TRPV1-specific nanomolar-affinity analgesic antagonist SB-366791. SB-366791 binds to the vanilloid site and acts as an allosteric hTRPV1 inhibitor. SB-366791 binding site is supported by mutagenesis combined with electrophysiological recordings and can be further explored to design new drugs targeting TRPV1 in disease conditions.

59 BASIC BIOLOGICAL SCIENCES↗

First Experimental Test of the Ratio Method

The ratio is a new reaction observable suggested to extract accurately structure information on halo nuclei. It corresponds to the ratio of differential cross sections for scattering and breakup, which is predicted to remove the uncertainty related to the reaction dynamics. We present here the first experimental test of the method for the 11 Be + 12 C collision at E Lab = 20A MeV performed at Texas A&M University. Differential cross sections for scattering and inclusive one-neutron breakup have been measured with the new detector array BlueSTEAl. The ratio of cross sections is very smooth and independent of the projectile-target interaction, which demonstrates the validity of the ratio method. We extend our analysis to existing 11 Be + 208 Pb data, confirming that the method works well on any target.

11Be↗

NEAMS Burnup Extension Accomplishments and Remaining Modeling Gaps

The economic viability of light-water reactors (LWRs) in the United States is declining in heavily subsidized markets, and as a result, the nuclear industry is looking for opportunities to enhance the economic competitiveness of nuclear power. This is not a foreign concept to the nuclear industry: in the mid-2000s, the nuclear industry set out to achieve zero fuel failures by 2010. The goal in this effort was to drive down the cost of reactor shut down by replacing a pin or bundle in response to fuel rod failure. 2010 brought about the initiative to deliver the nuclear promise to reduce operating cost by 30% to improve nuclear energy’s economic competitiveness before 2020. The emergence of accident-tolerant fuel also offers the nuclear industry an opportunity to build on these past successes and deliver affordable, clean energy. Accident-tolerant fuel has been shown to provide superior performance compared to traditional Zircaloy/UO2 fuel concepts, offering the unique ability to remove operational limitations that inhibit the economic viability of nuclear power. This has led the industry to begin building a technical case to extend the peak rod average burnup beyond 62 GWd/tU to extend pressurized water reactor cycle lengths to 24 months and to develop more efficient boiling water reactor core designs. The Nuclear Energy Advanced Modeling and Simulation (NEAMS) program mission is to develop advanced modeling and simulation tools and capabilities to accelerate the deployment of advanced nuclear energy technologies. The primary safety concern inhibiting the nuclear industry from extending burnup is related to high-burnup fuel fragmentation, relocation, and dispersal. Therefore, the NEAMS program developed a targeted 5-year plan to support the industry’s efforts to extend burnup. This milestone report summarizes the 5-year plan that was enacted in FY20, followed by a discussion of the ongoing activates required to fulfill the 5-year plan, as well as the approach to address the current modeling gaps. Additionally, an LWR stakeholder meeting was held to communicate work performed in the NEAMS program over the past three years, to assess the LWR community’s perspective on the impact of the program, and to identify remaining significant gaps in the NEAMS suite of capabilities. This engagement will be documented by the Electric Power Research Institute and used by NEAMS to redirect current LWR scope as needed and to develop the next phase for LWR research and development.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

hr-Adaptivity for nonconforming high-order meshes with the target matrix optimization paradigm

In this study, we present an \(hr\) -adaptivity framework for optimization of high-order meshes. This work extends the r -adaptivity method by Dobrev et al. (Comput Fluids, 2020), where we utilized the Target-Matrix Optimization Paradigm (TMOP) to minimize a functional that depends on each element’s current and target geometric parameters: element aspect-ratio , size , skew , and rotation . Since fixed mesh topology limits the ability to achieve the target size and aspect-ratio at each position, in this paper, we augment the r -adaptivity framework with nonconforming adaptive mesh refinement to further reduce the error with respect to the target geometric parameters. The proposed formulation, referred to as \(hr\) -adaptivity, introduces TMOP-based quality estimators to satisfy the aspect-ratio target via anisotropic refinements and size target via isotropic refinements in each element of the mesh. The methodology presented is purely algebraic, extends to both simplices and hexahedra/quadrilaterals of any order, and supports nonconforming isotropic and anisotropic refinements in 2D and 3D. Using a problem with a known exact solution, we demonstrate the effectiveness of \(hr\) -adaptivity over both r - and \(h\) -adaptivity in obtaining similar accuracy in the solution with significantly fewer mesh nodes. We also present several examples that show that \(hr\) -adaptivity can help satisfy geometric targets even when \(r\) -adaptivity fails to do so, due to the topology of the initial mesh.

42 ENGINEERING↗

Visualization of conformational changes and membrane remodeling leading to genome delivery by viral class-II fusion machinery

Chikungunya virus (CHIKV) is a human pathogen that delivers its genome to the host cell cytoplasm through endocytic low pH-activated membrane fusion mediated by class-II fusion proteins. Though structures of prefusion, icosahedral CHIKV are available, structural characterization of virion interaction with membranes has been limited. Here, we have used cryo-electron tomography to visualize CHIKV’s complete membrane fusion pathway, identifying key intermediary glycoprotein conformations coupled to membrane remodeling events. Using sub-tomogram averaging, we elucidate features of the low pH-exposed virion, nucleocapsid and full-length E1-glycoprotein’s post-fusion structure. Contrary to class-I fusion systems, CHIKV achieves membrane apposition by protrusion of extended E1-glycoprotein homotrimers into the target membrane. The fusion process also features a large hemifusion diaphragm that transitions to a wide pore for intact nucleocapsid delivery. Our analyses provide comprehensive ultrastructural insights into the class-II virus fusion system function and direct mechanistic characterization of the fundamental process of protein-mediated membrane fusion.

59 BASIC BIOLOGICAL SCIENCES↗

Defining Electrode-Level Metrics for Enabling Earth-Abundant, Mn-Rich Cathodes: A Technoeconomic Analysis of Experimental Materials

Manganese-rich oxides are attractive options as next-generation, earth-abundant cathodes and significant efforts are being directed toward commercial implementation. We report here an updated techno-economic analysis of the lithium- and manganese-rich (LMR) class of earth-abundant cathodes for electric vehicle applications. BatPaC modeling was used to define the cell-level metrics that must be met for these materials to be cost and energy competitive with the current commercial earth-abundant benchmark, LiFePO 4 , as well as anticipated variations such as LiMn 0.8 Fe 0.2 PO 4 . The model was used to evaluate a high-performance material from the literature and subsequently define R&D targets as the likely limits of practical performance for similar LMR systems. Experimental validation and BatPaC evaluation of an advanced, cobalt-free LMR cell system was also conducted. Results show that the advanced LMR cells come within ∼5% of the defined limits and exceed the energy of LiFe(Mn)PO 4 cells at a similar cost. Excellent cycle-life, low impedance, and low impedance rise were also achieved under the conditions tested and reveal that cobalt is not necessary to achieve high-performance LMR oxides. Although the analysis conducted herein reports on LMR cell systems, the methodology and target values defined for performance metrics easily extend to the evaluation of other systems under consideration as earth-abundant options.

Chen, Jiajun [Argonne National Laboratory (ANL), A↗

Test of Sigmund scaling for low collision energies

A scaling law that describes the most probable vibrorotational excitation in ion-molecule collisions has recently been extended by Sigmund (1981) to cover polyatomic targets. The predictions of this scaling law are examined for collisions of Cl(-) and K(+) with the targets O2, N2, CO, CO2, and CH4 in the energy range 50-200 eV. The experimental results do not all scale according to the theory. The study does demonstrate the usefulness of the scaling variables when examining the most probable vibrorotational excitation in ion-molecule collisions. A collection of isoelectronic scattering results is presented.

Vedder, M.↗

Automatic corn-soybean classification using Landsat MSS data. I - Near-harvest crop proportion estimation. II - Early season crop proportion estimation

The techniques used initially for the identification of cultivated crops from Landsat imagery depended greatly on the iterpretation of film products by a human analyst. This approach was not very effective and objective. Since 1978, new methods for crop identification are being developed. Badhwar et al. (1982) showed that multitemporal-multispectral data could be reduced to a simple feature space of alpha and beta and that these features would separate corn and soybean very well. However, there are disadvantages related to the use of alpha and beta parameters. The present investigation is concerned with a suitable method for extracting the required features. Attention is given to a profile model for crop discrimination, corn-soybean separation using profile parameters, and an automatic labeling (target recognition) method. The developed technique is extended to obtain a procedure which makes it possible to estimate the crop proportion of corn and soybean from Landsat data early in the growing season.

Badhwar, G. D.↗

Optimal directional view angles for remote-sensing missions

The present investigation is concerned with the directional, off-nadir viewing of terrestrial scenes using remote-sensing systems from aircraft and satellite platforms, taking into account advantages of such an approach over strictly nadir viewing systems. Directional reflectance data collected for bare soil and several different vegetation canopies in NOAA-7 AVHRR bands 1 and 2 were analyzed. Optimum view angles were recommended for two strategies. The first strategy views the utility of off-nadir measurements as extending spatial and temporal coverage of the target area. The second strategy views the utility of off-nadir measurements as providing additional information about the physical characteristics of the target. Conclusions regarding the two strategies are discussed.

Kimes, D. S.↗

Is there an Obscured AGN in the Normal Galaxy IRASF01063-8034

The target galactic nucleus is ostensibly "normal," but the presence of water maser emission indicates that it may be an obscured AGN. Our primary goal has been to test this hypothesis through the detection hard X-ray emission and an X-ray spectrum characteristic of heavy absorption. The data for this program became available in May 2003. Light curves show that most of the data are good and that the background was well behaved. We have constructed images and found the X-ray emission in this target is a hard and may be extended. The presence of an AGN has been confirmed through observation with XMM. This is one of many edge-on normal galaxies that may contain AGN. The orientation of the extension will be compared to the structure of molecular gas observed at high angular resolution with VLBI. These radio observations were completed in August 2003. Correlation was completed in late 2003. The data have yet to be delivered by the ATNF. Since the start of the program, we have also obtained six radio spectra, on top of the two obtained at or close to the epoch of discovery for the maser. Early indications were that the maser emission exhibited unusually broad velocity extent and that it "jumped in velocity on time scales of weeks. This behavior has been speculated to be the signature of emission excited by jet-ISM interactions. After more extensive and more sensitive radio study, we find that (1) the emission does not in fact change velocity centroid substantially and (2) it comprises narrower, more "normal" emission features. The joint interpretation of radio and XMM data will be possible once the VLBI images and position-resolved X-ray spectra have been made, probably in summer 2004. If the radio emission arises in an accretion disk, rather than a jet, then we may predict that the VLBI images will exhibit velocity-position gradients orthogonal to the extension of X-ray emission, which presumably traces an optical narrow line or outflow region.

Greenhill, Lincoln J.↗

A signal detection model predicts the effects of set size on visual search accuracy for feature, conjunction, triple conjunction, and disjunction displays

Recently, quantitative models based on signal detection theory have been successfully applied to the prediction of human accuracy in visual search for a target that differs from distractors along a single attribute (feature search). The present paper extends these models for visual search accuracy to multidimensional search displays in which the target differs from the distractors along more than one feature dimension (conjunction, disjunction, and triple conjunction displays). The model assumes that each element in the display elicits a noisy representation for each of the relevant feature dimensions. The observer combines the representations across feature dimensions to obtain a single decision variable, and the stimulus with the maximum value determines the response. The model accurately predicts human experimental data on visual search accuracy in conjunctions and disjunctions of contrast and orientation. The model accounts for performance degradation without resorting to a limited-capacity spatially localized and temporally serial mechanism by which to bind information across feature dimensions.

Non-NASA Center↗

Formal methods for test case generation

The invention relates to the use of model checkers to generate efficient test sets for hardware and software systems. The method provides for extending existing tests to reach new coverage targets; searching *to* some or all of the uncovered targets in parallel; searching in parallel *from* some or all of the states reached in previous tests; and slicing the model relative to the current set of coverage targets. The invention provides efficient test case generation and test set formation. Deep regions of the state space can be reached within allotted time and memory. The approach has been applied to use of the model checkers of SRI's SAL system and to model-based designs developed in Stateflow. Stateflow models achieving complete state and transition coverage in a single test case are reported.

Rushby, John↗

Impacts of Spatial Fidelity Violations in the Forward Signal Model on DOAS-based Greenhouse Gas Retrievals: a Preliminary Analysis for OCO-2 (and Other Missions)

Success in three aspects of OCO‐2 mission is threatened by unaccounted spa,al variability effects, all involving atmospheric scattering: 1. Low/moderately opaque clouds can escape the prescreening by mimicking a brighter surface. 2. Prescreening does not account for long‐range radia,ve impact (adjacency effect) of nearby clouds. Need for extended cloud masking? 3. Oblique looks in target mode are highly exposed to surface adjacency and aerosol variability effects.We'll be covering all three bases!

aerosols↗

Extending Explicit Guidance Methods to Higher Dimensions, Additional Conditions, and Higher Order Integration

Guidance functions play critical roles in autonomy to steer vehicles and aircraft to the intended target or destination. Explicit guidance (E Guidance) solves the two-point boundary value problem with initial and final conditions for position and velocity. The original formulation of E Guidance involves translational acceleration commands with a direct relationship to time, and it is possible to modify E Guidance for rotational acceleration. Other extensions for E Guidance include higher dimensions, additional conditions, and higher-order integration of the linearly independent E Guidance functions. The most promising extension involves higher-order integration of the E Guidance functions, but it may be physically impractical by initially moving away from the target. This paper provides a brief overview of some methods that extend E Guidance to higher dimensions, utilize additional conditions, or perform higher-order integration, and if they satisfy the two-point boundary value problem.

explicit guidance↗

Extending Explicit Guidance Methods to Higher Dimensions, Additional Conditions, and Higher Order Integration

Guidance functions play critical roles in autonomy to steer vehicles and aircraft to the intended target or destination. Explicit guidance (E Guidance) solves the two-point boundary value problem with initial and final conditions for position and velocity. The original formulation of explicit guidance involves translational acceleration commands with a direct relationship to time, and it is possible to modify E Guidance for rotational acceleration. Other extensions for E Guidance include higher dimensions, additional conditions, and higher-order integration of the linearly independent E Guidance functions. The most promising extension involves higher-order integration of the E Guidance functions, but it may be physically impractical by initially moving away from the target. This paper provides a brief overview of some methods that extend E Guidance to higher dimensions, utilize additional conditions, or perform higher-order integration, and if they satisfy the two-point boundary value problem.

explicit guidance↗

Elastic proton scattering off nonzero spin nuclei

In recent years, we constructed a microscopic optical potential (OP) for elastic nucleon-nucleus ( NA ) scattering using modern approaches based on chiral theories for the nucleon-nucleon ( NN ) interaction. The OP was derived at first order of the spectator expansion in Watson multiple scattering theory and its final expression was a folding integral between the NN t matrix and the nuclear density of the target. Two- and three-body forces are consistently included both in the target and in the projectile description. The purpose of this work is to apply our microscopic OP to nuclei characterized by a ground state of spin-parity quantum numbers J π ≠ 0 + . We extended our formalism to include the spin of the target nucleus. The full amplitudes of the NN reaction matrix are retained in the calculations starting from two- and three-body chiral forces. The microscopic OP can be applied in the energy range 100 ≤ E ≤ 350 MeV. Finally, we show a remarkable agreement with experimental data for the available observables and, simultaneously, provide reliable estimates for the theoretical uncertainties. This work paves the way toward a full microscopic approach to inelastic NA scattering, showing that the derivation of optical potentials between states with J π ≠ 0 + is completely under control.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Attitude and articulation control for CRAF/Cassini

The Comet Rendezvous/Asteroid Flyby (CRAF) and Cassini planetary missions provide exciting pointing and control challenges. The mission and science objectives, and an attitude and articulation control concept designed to meet these challenges, are described. CRAF/Cassini mission characteristics which drive pointing and control include: close range flybys of asteroids and icy satellites; Huygens probe guidance and communication; Saturn orbit insertion; comet rendezvous and orbit insertion; closed loop target tracking from a comet orbit perturbed by gas and dust pressure; fine spacecraft pointing for Titan radar mapping and Earth communications; requirements for autonomous failure detection; isolation; recovery; and 13.5 year lifetime. The philosophy and approach chosen to meet these challenges and the overall control architecture are addressed, including operational and autonomous safe modes. Critical functions are highlighted, such as charge coupled device imaging of stars and extended bodies which provide references for inertial and target referenced pointing respectively. Tradeoffs and rationale for the selection and location of sensors and actuators are reviewed.

Bell, C. E.↗

Finite difference time domain calculation of transients in antennas with nonlinear loads

In this paper transient fields for antennas with more general geometries are calculated directly using Finite Difference Time Domain methods. In each FDTD cell which contains a nonlinear load, a nonlinear equation is solved at each time step. As a test case the transient current in a long dipole antenna with a nonlinear load excited by a pulsed plane wave is computed using this approach. The results agree well with both calculated and measured results previously published. The approach given here extends the applicability of the FDTD method to problems involving scattering from targets including nonlinear loads and materials, and to coupling between antennas containing nonlinear loads. It may also be extended to propagation through nonlinear materials.

Luebbers, Raymond J.↗