Search NASA⌕ Search

SEARCH · Search NASA

Results for “FIELD STRENGTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Effect of Interface Shape and Magnetic Field on the Microstructure of Bulk Ge:Ga

Thermal and compositional gradients induced during the growth process contribute significantly to the development of defects in the solidified boule. Thermal gradients and the solid-liquid interface shape can be greatly effected by ampoule material. Compositional gradients are strongly influenced by interface curvature and convective flow in the liquid. Results of this investigation illustrate the combined influences of interface shape and convective fluid flow. An applied magnetic field was used to reduce the effects of convective fluid flow in the electrically conductive melt during directional solidification. Several 8 mm diameter boules of Ga-doped Ge were grown at different field strengths, up to 5 Tesla, in four different ampoule materials. Compositional profiles indicate mass transfer conditions ranged from completely mixed to diffusion controlled. The influence of convection in the melt on the developing crystal microstructure and defect density was investigated as a function of field strength and ampoule material. Chemical etching and electron backscattered electron diffraction were used to map the crystal structure of each boule along the center plane. Dislocation etch pit densities were measured for each boule. Results show the influence of magnetic field strength and ampoule material on overall crystal quality.

Cobb, S. D.↗

Period doubling in the outer heliosphere

From approximately July 28 to November 26, 1984, IMP 8 at 1 AU observed quasi-periodic interaction regions in the solar wind characterized by a peak every 13.4 days in the magnetic field strength, plasma density, and temperature, corresponding to an inertial period of 12.5 days. When the same solar wind reached Voyager 2 (which moved from 15.2 to 16.1 AU during the corresponding time interval, September 27, 1984, to January 27, 1985), the enhancements in the magnetic field strength and the plasma density and temperature recurred with a period of approximately 25 days. Thus the period of the large-scale fluctuations in B, N, and T doubled between 1 AU and 15.2 AU. The magnetic field strength increased linearly with the density and the temperature in the Voyager 2 data. The tails of the distributions of B, N, and T in the Voyager 2 data were approximately exponential.

Burlaga, L. F.↗

A Study of the Non-Thermal X-Ray Emission of Shell-Type Supernova Remnants

We present an analysis of the X-ray spectrum of the Galactic shell-type SNR G347.3-0.5 (RX 51713.7-3946). This SNR is a member of a growing class of SNRs which are dynamically young, shell-type sources that emit non-thermal X-rays from specific regions on their outer shells. By performing a joint spectral analysis of data from observations made of G347.3-0.5 using the ROSAT PSPC, the ASCA GIS and the RXTE PCA, we have fit the spectra of particular regions of this SNR (including the bright northwestern and southwestern rims, the northeast rim and the interior diffuse emission) over the approximate energy range of 0.5 through 30 keV. We find that fits to the spectra of this SNR over this energy range using the SRCUT model were superior to a simple power law model or the SRESC model. We find that the inclusion of a thermal model with the SRCUT model helps to improve the fit to the observed X-ray spectrum: this represents the first detection of thermal X-ray emission from G347.3-0.5. Thermal emission appears to be more clearly associated with the diffuse emission in the interior of the SNR than with the bright X-ray emitting rims. A weak emission feature seen near 6.4 keV in the RXTE PCA spectrum most likely originates from diffuse X-ray emission from the surrounding Galactic Ridge rather than from G347.3-0.5 itself. We have analyzed our RXTE PCA data to search for pulsations from a recently discovered radio pulsar (PSR 51713-3949) which may be associated with G347.3-0.5, and we do not detect any X-ray pulsations at the measured radio period of 392 ms. Using the best-fit parameters obtained from the SRCUT model, we estimate the maximum energy of cosmic-ray electrons accelerated by the rims of G347.3-0.5 to be 19-25 TeV (assuming a magnetic field strength of B = 10muG), consistent with the results of Ellison et al. We present a broadband (radio to gamma ray) photon energy-flux spectrum for the northwestern rim of G347.3-0.5, where we have fit the spectrum using a more sophisticated synchrotron-inverse Compton model with a variable magnetic field strength. Our fit derived from this model yields a maximum energy of only 8.8 (+4.1) (-3.4) TeV for the accelerated cosmic-ray electrons and a much greater magnetic field strength of 150 (+250) (-80). Finally, we compare the gross properties of G347.3-0.5 with other SNRs known to possess X-ray spectra dominated by non-thermal emission.

Allen, Glenn E.↗

Summary of initial results from the GSFC fluxgate magnetometer on Pioneer 11

The main magnetic field of Jupiter was measured by the Fluxgate Magnetometer on Pioneer 11 and analysis reveals it to be relatively more complex than expected. In a centered spherical harmonic representation with a maximum order of n = 3 (designated GSFC model 04), the dipole term (with opposite polarity to the Earth's) has a moment of 4.28 Gauss x (Jupiter radius cubed), tilted by 9.6 deg towards a system 111 longitude of 232. The quadrupole and octupole moments are significant, 24% and 21% of the dipole moment respectively, and this leads to deviations of the planetary magnetic field from a simple offset tilted dipole for distances smaller than three Jupiter radii. The GSFC model shows a north polar field strength of 14 Gauss and a south polar field strength of 10.4 Gauss. Enhanced absorption effects in the radiation belts may be predicted as a result of field distortion.

Acuna, M. H.↗

Anode power deposition in applied-field MPD thrusters

Anode power deposition is the principle performance limiter of magnetoplasmadynamic (MPD) thrusters. Current thrusters lose between 50 and 70 percent of the input power to the anode. In this work, anode power deposition was studied for three cylindrical applied magnetic field thrusters for a range of argon propellant flow rates, discharge currents, and applied-field strengths. Between 60 and 95 percent of the anode power deposition resulted from electron current conduction into the anode, with cathode radiation depositing between 5 and 35 percent of the anode power, and convective heat transfer from the hot plasma accounting for less than 5 percent. While the fractional anode power loss decreased with increasing applied-field strength and anode size, the magnitude of the anode power increased. The rise in anode power resulted from a linear rise in the anode fall voltage with applied-field strength and anode radius. The anode fall voltage also rose with decreasing propellant flow rate. The trends indicate that the anode fall region is magnetized, and suggest techniques for reducing the anode power loss in MPD thrusters.

Myers, Roger M.↗

Anode power deposition in applied-field MPD thrusters

Anode power deposition is the principal performance limiter of magnetoplasmadynamic (MPD) thrusters. Current thrusters lose between 50 and 70 percent of the input power to the anode. In this work, anode power deposition was studied for three cylindrical applied magnetic field thrusters for a range of argon propellant flow rates, discharge currents, and applied-field strengths. Between 60 and 95 percent of the anode power depositions resulted from electron current conduction into the anode, with cathode radiation depositing between 5 and 35 percent of the anode power, and convective heat transfer from the hot plasma accounting for less than 5 percent. While the fractional anode power loss decreased with increasing applied-field strength and anode size, the magnitude of the anode power increased. The rise in anode power resulted from a linear rise in the anode fall voltage with applied-field strength and anode radius. The anode fall voltage also rose with decreasing propellant flow rate. The trends indicate that the anode fall region is magnetized, and suggest techniques for reducing the anode power loss in MPD thrusters.

Myers, Roger M.↗

Observations of the internal structure of the magnetopause

Magnetic field, plasma flux, and ELF wave data have been studied for several encounters of Ogo 5 with the earth's magnetopause. In one case of a crossing in the near-earth region of the geomagnetic tail, the structure agreed closely with a simple Chapman-Ferraro type of model with nearly complete neutralization of the charge separation electric field. Departures from the simple structure were observed at other magnetopause crossings. One crossing revealed a well-defined double structure with a large change in field direction closer to the earth than the ion flux and field strength gradients. The thickness of the magnetopause often depended on whether the change in field strength, the change in field direction, or the change in ion flux was being considered. Bursts of ELF waves were occasionally observed at the magnetopause.

Neugebauer, M.↗

On the interpretation of the beta(sub p) relation in interstellar clouds

Troland and Heiles (1986) have recently presented an updated compilation of observational data concerning the relationship between the interstellar magnetic field strength B and the gas density rho (or, equivalently, the particle density n). One of the main findings of their survey was that B remains constant over the density range 0.1 - approx. 100 cu. cm and shows evidence for increase only a higher densities. They compared this result with theoretical predictions based on the Parker-instability scenario for the formation and evolution of interstellar clouds in the presence of the galactic magnetic field. In this picture, low-density gas is driven by the magnetic Rayleigh-Taylor instability into magnetic valleys, where it accumulates into denser concentrations. The gas initially flows along the magnetic field lines and there is little increase of the field strength with density; B only starts to rise when n becomes large enough for self-gravity to begin competing with the magnetic stresses. For a cloud mass of approx. 1,000 sub M and the measured background field strength, the critical density for contraction in approx. 75 cu. cm. Troland and Heiles therefore concluded that this scenario is basically consistent with the observations. This conclusion is debated.

Koenigl, A.↗

Local Electric Field Effects on Water Dissociation in Bipolar Membranes Studied Using Core–Shell Catalysts

The local electric field strength is thought to affect the rate of water dissociation (WD) in bipolar membranes (BPMs) at the catalyst–nanoparticle surfaces. Here, we study core–shell nanoparticles, where the core is metallic, semiconducting, or insulating, to understand this effect. The nanoparticle cores were coated with a WD catalyst layer (TiO2 or HfO2) via atomic layer deposition (ALD), and the morphology was imaged with transmission electron microscopy. Irrespective of the core material, these core–shell catalysts displayed comparable WD overpotentials at optimal mass loading, despite the hypothesized differences in the electric field strength across the catalyst particle suggested by continuum electrostatic simulations. Substantial atomic interdiffusion between the core and shell was ruled out by X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and diffuse reflectance optical measurements. However, the optimal mass loading of catalyst was roughly 1 order of magnitude higher for the conductive and high dielectric core materials than for the low dielectric insulating cores. These findings are consistent with the hypothesis that electric field screening within the core material focuses the electric field drop between particles such that larger film thicknesses can be tolerated. Collectively, these data support the idea that it is the local electric field at the molecular level that controls proton-transfer rates and that the metal core/dielectric-shell constructs introduced here modulate that field. Further materials and synthetic design may enable optimization of the electric field strength across the proton-transfer trajectory at the material surface.

Sarma, Prasad V↗

Concerning flux erosion from the dayside magnetosphere

The dayside magnetopause moves inward during periods of southward interplanetary magnetic field in response to decreases in the outer magnetospheric magnetic field strength. We consider possible causes for the magnetic field strength decreases and demonstrate that they are consistent with increases in the region 1 Birkeland and cross-tail currents. We reexamine the well-known series of magnetopause crossings by OGO 5 on March 27, 1968, to demonstrate that they provide evidence for two intervals of gradual inward magnetopause motion associated with magnetic flux erosion and also for two intervals of inward magnetopause motion associated with sharp increases in the solar wind dynamic pressure.

Tsyganenko, N. A.↗

The Peculiar Solar Minimum 23/24 Revealed by the Microwave Butterfly Diagram

The diminished polar magnetic field strength during the minimum between cycles 23 and 24 is also reflected in the thermal radio emission originating from the polar chromosphere. During solar minima, the polar corona has extended coronal holes containing intense unipolar flux. In microwave images, the coronal holes appear bright, with a brightness enhancement of 500 to 2000 K with respect to the quiet Sun. The brightness enhancement corresponds to the upper chromosphere, where the plasma temperature is approx.10000 K. We constructed a microwave butterfly diagram using the synoptic images obtained by the Nobeyama radioheliograph (NoRH) showing the evolution of the polar and low latitude brightness temperature. While the polar brightness reveals the chromospheric conditions, the low latitude brightness is attributed to active regions in the corona. When we compared the microwave butterfly diagram with the magnetic butterfly diagram, we found a good correlation between the microwave brightness enhancement and the polar field strength. The microwave butterfly diagram covers part of solar cycle 22, whole of cycle 23, and part of cycle 24, thus enabling comparison between the cycle 23/24 and cycle 22/23 minima. The microwave brightness during the cycle 23/24 minimum was found to be lower than that during the cycle 22/23 minimum by approx.250 K. The reduced brightness temperature is consistent with the reduced polar field strength during the cycle 23/24 minimum seen in the magnetic butterfly diagram. We suggest that the microwave brightness at the solar poles is a good indicator of the speed of the solar wind sampled by Ulysses at high latitudes..

Gopalswamy, Natchimuthuk↗

Propagation of a narrow plasma beam in an oblique magnetic field

The propagation of an intense neutralized ion beam (v is about 5 x 10 exp 8 cm/sec, n is about 10 exp 10/cu cm) through a large insulated vacuum chamber is measured as a function of magnetic field strength and direction. When the beam propagates parallel to the applied field, beam divergence is reduced. When the beam propagates perpendicular to the applied fields, the downstream beam density decreases with increasing field strength. When the beam velocity vector intersects the magnetic field at an oblique angle, beam propagation is determined primarily by the perpendicular component of the field.

Heidbrink, W. W.↗

The Hale solar sector boundary

A Hale solar sector boundary is defined as the half (Northern Hemisphere or Southern Hemisphere) of a sector boundary in which the change of sector magnetic field polarity is the same as the change of polarity from a preceding spot to a following spot. Above a Hale sector boundary the green corona has maximum brightness, while above a non-Hale boundary the green corona has a minimum brightness. The Hale portion of a photospheric sector boundary tends to have maximum magnetic field strength, while the non-Hale portion has minimum field strength.

Svalgaard, L.↗

The Hale solar sector boundary

A Hale solar-sector boundary is defined as that half (northern hemisphere or southern hemisphere) of a sector boundary in which the change of sector-magnetic-field polarity is the same as the change of polarity from a preceding spot to a following spot. Above a Hale sector boundary the green corona has maximum brightness, while above a non-Hale boundary the green corona has a minimum brightness. The Hale portion of a photospheric sector boundary tends to have maximum magnetic-field strength, while the non-Hale portion has minimum field strength.

Svalgaard, L.↗

Nanoflare Heating of an X-Ray Bright Point

Nanoflares are thought to be one of the prime candidates that can keep the solar corona to its multimillion kelvin temperature. Individual nanoflares are difficult to detect with the present generation instruments, however their presence can be inferred by comparing the nanoflare heated simulated plasma emissions with the observed emission. Here, we present a simulation of emission from an X-ray Bright Point (XBP) that was observed by the Marshall Grazing Incidence X-ray Spectrometer (MaGIXS), along with concurrent observations from SDO/AIA and Hinode/XRT. We use EBTEL hydrodynamic code to simulate the XBP loops. Length and magnetic field strength of these loops are derived from the potential field extrapolation of the observed photospheric magnetogram by HMI/SDO. Each loop is assumed to be heated by random nanoflares, whose magnitude and frequency are determined by the looplength and magnetic field strength. The simulated outputs are used to predict the intensity of spectrally pure map of Fe-18, Fe-17, Ne-9 ,O-8, O-9, Ne-9 etc, which are then compared with the derived intensity from MaGIXS observation. Further we have predicted the intensity map as observed by AIA and XRT and compared them with the observation. We also estimated the temperature distribution of the XBP from the simulation and found a good agreement with the derived distribution from MaGIXS observation.

coronal heating↗

Crater Flux Transfer Events: Highroad to the X Line?

We examine Cluster observations of a so-called magnetosphere crater FTE, employing data from five instruments (FGM, CIS, EDI, EFW, and WHISPER), some at the highest resolution. The aim of doing this is to deepen our understanding of the reconnection nature of these events by applying recent advances in the theory of collisionless reconnection and in detailed observational work. Our data support the hypothesis of a stratified structure with regions which we show to be spatial structures. We support the bulge-like topology of the core region (R3) made up of plasma jetting transverse to reconnected field lines. We document encounters with a magnetic separatrix as a thin layer embedded in the region (R2) just outside the bulge, where the speed of the protons flowing approximately parallel to the field maximizes: (1) short (fraction of a sec) bursts of enhanced electric field strengths (up to approximately 30 mV/m) and (2) electrons flowing against the field toward the X line at approximately the same time as the bursts of intense electric fields. R2 also contains a density decrease concomitant with an enhanced magnetic field strength. At its interface with the core region, R3, electric field activity ceases abruptly. The accelerated plasma flow profile has a catenary shape consisting of beams parallel to the field in R2 close to the R2/R3 boundary and slower jets moving across the magnetic field within the bulge region. We detail commonalities our observations of crater FTEs have with reconnection structures in other scenarios. We suggest that in view of these properties and their frequency of occurrence, crater FTEs are ideal places to study processes at the separatrices, key regions in magnetic reconnection. This is a good preparation for the MMS mission.

Farrugia, C. J.↗

Generation of ULF waves by electric or magnetic dipoles

The generation of ULF waves by ground-based magnetic and electric dipoles is studied with a simplified model consisting of three adjoining homogeneous regions representing the groud, the vacuum (free space) region, and the ionosphere. The system is assumed to be immersed in a homogeneous magnetic field with an arbitrary tilt angle. By the use of Fourier techniques and the method of stationary phase, analytic expressions are obtained for the field strength of the compressional Alfven waves in the ionosphere. Expressions are also obtained for the strength of the torsional Alfven wave in the ionosphere and the ULF magnetic field at ground level. Numerical results are obtained for the compressional Alfven-wave field strength in the ionosphere with a nonvertical geomagnetic field and for the ULF magnetic field at ground level for a vertical geomagnetic field.

Harker, K. J.↗

Electrostatic noise bands associated with the electron gyrofrequency and plasma frequency in the outer magnetosphere

Naturally occurring noise bands near the electron plasma frequency are frequently detected by the University of Iowa plasma wave experiment on the Imp 6 satellite in the region from just inside the plasmapause to radial distances of about 10 earth radii in the outer magnetosphere. The electric field strength of these noise bands is usually small with typical broad band electric field strengths of about 2 microvolts per m. A magnetic field has been detected only in a few unusually intense cases, and in these cases the magnetic field energy density is several orders of magnitude smaller than the electric field energy density. The bands are observed at all magnetic latitudes covered by the Imp 6 orbit and appear to be a permanent feature of the outer magnetosphere. They are found at all local times and occur least frequently in the quadrant from 18 to 24 hours. The bands appear to consist of two distinct spectral types called diffuse and narrow band. In both types the center frequency of the noise band is bounded by consecutive harmonics of the electron gyrofrequency, and these noise bands occur most often between harmonics that are near the local electron plasma frequency.

Shaw, R. R.↗