Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUOROCARBON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Volatile organic components in the Skylab 4 spacecraft atmosphere

The volatile organic components in the spacecraft cabin atmosphere of Skylab 4 were trapped on a solid adsorbent at various times during the mission. In post-flight analyses, more than 300 compounds in concentrations from less than 1 ppb up to 8000 ppb could be detected by high-resolution gas chromatography. In the samples of the 11th, 47th, and 77th day of the mission, approximately 100 components in the molecular weight range from 58 to 592 were identified by mass spectrometry. Besides components known from other environments, such as alkanes, alkenes, and alkylated aromatic hydrocarbons, components typical of the human metabolism, such as ketones and alcohols, were found. Other typical components in the spacecraft atmosphere included fluorocarbons and various silicone compounds, mostly normal and cyclic methylsiloxanes.

Liebich, H. M.↗

Development of a special purpose spacecraft interior coating, phase 1

Coating formulations were developed consisting of latex blends of fluorocarbon polymers, acrylic resins, stabilizers, modifiers, other additives, and a variety of inorganic pigments. Suitable latex primers were also developed from an acrylic latex base. The formulations dried to touch in about one hour and were fully dry in about twenty-four hours under normal room temperature and humidity conditions. The resulting coatings displayed good optical and mechanical properties, including excellent bonding to (pre-treated) substrates. In addition, the preferred compositions were found to be self-extinguishing when applied to nonflammable substrates and could meet the offgassing requirements specified by NASA for the intended application. Improvements are needed in abrasion resistance and hardness.

Bartoszek, E. J.↗

Federal authorities

Existing Federal authority to regulate fluorocarbons and the effectiveness of the various types of regulation are considered.

Source record↗

Study of toxicological evaluation of fire suppressants and extinguishers

The application of fluorocarbons as possible candidates for fire extinguishers and/or suppressants in confined spaces (such as spacecraft, aircraft, or submarines) was investigated, with special emphasis on their safety to man since they would be inhaled on an almost continuous basis. Short-term exposure experiments, using various animal species, were devised to look at specific parameters in order to determine which of the candidate compounds were sufficiently non-toxic to warrant long-term investigations. The following physiologic criteria were examined; tissue distribution, fluoride concentration, effect on mitochondria, microsomes, liposomes, and liver cell nuclei, erythrocyte fragility, clinical chemistry values, hematology, pathology, cardiac sensitization, behavioral effects. Various rodent species were used for initial investigations, with non-human primate exposures for Freon 116 which was warranted for negative results on rodents. Various types of exposure chambers were used, including closed dynamic chambers allowing for a recirculating atmosphere.

Source record↗

Ultraviolet remote sensing of atmospheric ozone from payloads using Shuttle capabilities

Previous atmospheric ozone observations using an ultraviolet double monochromator to measure the absorption of back-scattered solar radiation between 255 nm and 340 nm have provided information on the global total ozone distribution as well as its vertical profile. This information can be used to structure the comprehensive ozone observations that are needed to provide a better understanding of ozone formation and destruction mechanisms. Some potential ozone threats, especially that from photodissociation of fluorocarbons, make Shuttle-based observations especially timely. Because of the nature of the global ozone-transport process, measurements must be performed from space on a global scale with sufficient resolution and accuracy to determine the total amount of atmospheric ozone. A better understanding of ozone processes in global regions inaccessible from previous platforms is needed to complete this ozone data base. This paper describes the potential for Shuttle payloads to provide the required information.

Krueger, A. J.↗

Chlorofluoromethanes in the stratosphere and some possible consequences for ozone

Inert chlorofluoromethanes are used by man as refrigerants and aerosol propellants. These substances eventually escape and diffuse upward into the stratosphere. At great enough heights, UV sunlight can photodissociate these chlorofluorocarbons into chlorine atoms which will catalytically destroy ozone molecules. Chlorofluoromethane production has been increasing steadily in recent years to its present level of about a megaton per year, and chlorofluorocarbon usage will probably continue to grow in the future. Calculations with a one-dimensional time-dependent atmospheric model suggests that, if projected increases in chlorofluoromethane use materialize and there is no tropospheric destruction mechanism for these gases, the total global abundance of ozone may be reduced by more than 20 per cent over the next 50 years. If the residence times for these fluorocarbons in the troposphere are in the range of 10-30 years, however, predicted ozone depletions would be significantly smaller.

Turco, R. P.↗

The development of large diameter, high pressure, cryogenic radial static seals

Two configurations of radial static seals are developed for high-pressure 773 kg per sq cm cryogenic applications: a U-shaped fluorocarbon seal and a delta-shaped PTFE seal. The U-seal is a common commercial design consisting of a spring-loaded cup-shaped jacket; the basic principle is that the soft plastic jacket provides the interface between the piston and the bore, the jacket being held in place by a metal spring. The delta seal is based on the principle that the soft plastic delta cross section furnishes the interface at the metal face and circumferential face of the gland and cylinder. Test results indicate that both the plastic U-seal and the delta seal designs are sufficiently flexible to accommodate assembly in bore or piston grooves. Of these two configurations, the delta seal is found to be superior as it meets all the design requirements for proof pressure testing the turbopump components of the main engine in the Space Shuttle.

Burr, M. E.↗

Solar silicon via improved and expanded metallurgical silicon technology

A completed preliminary survey of silica sources indicates that sufficient quantities of high-purity quartz are available in the U.S. and Canada to meet goals. Supply can easily meet demand for this little-sought commodity. Charcoal, as a reductant for silica, can be purified to a sufficient level by high-temperature fluorocarbon treatment and vacuum processing. High-temperature treatment causes partial graphitization which can lead to difficulty in smelting. Smelting of Arkansas quartz and purified charcoal produced kilogram quantities of silicon having impurity levels generally much lower than in MG-Si. Half of the goal was met of increasing the boron resistivity from 0.03 ohm-cm in metallurgical silicon to 0.3 ohm-cm in solar silicon. A cost analysis of the solidification process indicate $3.50-7.25/kg Si for the Czochralski-type process and $1.50-4.25/kg Si for the Bridgman-type technique.

Hunt, L. P.↗

Effects of space radiation on thin polymers and nonmetallics

Advanced materials for various spacecraft systems in the 1980s and 1990s have been evaluated in situ after exposure to space radiation. Emphasis has been placed on materials having little or no previous base of environmental effects data. Applications ranging from earth orbit to near-sun have been covered. High temperature polymers and composites have been included. Silica composites may offer improved reflectance stability compared with metallized fluorocarbons. Directional reflectance properties of FEP are a function of charged particle energy and flux as well as total exposure fluence and material characteristics. Data obtained on polyimides and polyxylylenes under high temperature radiation exposure conditions will be discussed in the context of near-sun solar sailing and rendezvousing.

Fogdall, L. B.↗

Fast-drying coating

Nontoxic coating has excellent optical properties and can be pigmented in many different colors. It bonds well, can be applied by conventional methods, weathers well, and is self-extinguishing. Coating composition comprises latex blends of fluorocarbons, acrylic resins, stabilizers, modifiers, variety of inorganic pigments, and other additives. Suitable latex primers have also been developed from acrylic latex base.

Bartoszek, E. J.↗

Long-lasting solid-polymer electrolytic hygrometer

Device consists of hollow tube node of oxidation-resistant sulfonated fluorocarbon polymer. Tube absorbs moisture from air passing across inner and outer surfaces, causing change in polymer conductance. Change is related to change in water content in gas sample.

Lawson, D. D.↗

Selection standard for FEP films for solar energy

Purple fluorocarbon ethylene propylene (FEP) films are more efficient due to low absorptance. Designers seeking to improve coatings quantify this effect and devise simple screening test based on transmittance of films.

Reed, M. W.↗

Effect of hydraulic fluid (MIL-H-83282) on selected commercial O-ring compounds

Acrylonitrile and fluorocarbon compounds were evaluated at various temperatures and time intervals in samples of the fluid obtained from three qualified suppliers. It was concluded that both polymers can function in hydraulic fluids within the conditions defined by this study. Hydraulic fluid from each manufacturer was similar in its effect upon each given O-ring material, with one exception. Similarly, there were no striking differences in the resistance of O-rings of the same generic rubber type when provided by the different manufacturers.

Wood, T. E.↗

Investigation of test methods, material properties, and processes for solar cell encapsulants. Encapsulation task of the low-cost silicon solar array project

During this quarter, flat-plate solar collector systems were considered and six basic construction elements were identified: outer coatings, superstrates, pottants, substrates, undercoats, and adhesives. Materials surveys were then initiated to discover either generic classes or/and specific products to function as each construction element. Cost data included in the surveys permit ready evaluation of each material. Silicones, fluorocarbons, glass, and acrylic polymers have the highest inherent weatherability of materials studied to date. Only acrylics, however, combine low costs, environmental resistance, and potential processability. This class will receive particular emphasis.

Source record↗

Development and evaluation of elastomeric materials for geothermal applications

A material for a casing packer for service for 24 hours in a geothermal environment was developed by synthesis of new elastomers and formulation of available materials. Formulation included use of commercial elastomer gumstocks and also crosslinking of plastic (high Tg) materials. Fibrous reinforcement of fluorocarbon rubbers was emphasized. Organic fiber reinforcement did not increase hot properties significantly. Glass fiber reinforcement gave significant increase in tensile properties. Elongation was reduced, and the glass-reinforced composition examined so far did not hold up well in the geothermal environment. Colloidal asbestos fibers were also investigated. A few experiments with polyphenyl ether gave material with low tensile and high compression set. Available high styrene SBR compositions were studied. Work to date suggests that new synthetic polymers will be required for service in geothermal environments.

Mueller, W. A.↗

Materials for encapsulation systems for terrestrial photovoltaic arrays

The paper is concerned with glass and polymeric candidate materials and processes for potential encapsulation systems that could be used in low-cost long-life terrestrial photovoltaic arrays. The characteristics of encapsulation systems in use are reviewed, and the properties of proposed materials are examined. These materials include acrylics, epoxies, fluorocarbons, polycarbonates, polyesters, polyimides, polyxylylenes, and silicones. Properties of glass types are also considered. The prospects for glass and polymeric systems are analyzed, and the knowledge gained from a study of existing systems is discussed with attention to weather/aging effects, failures, environments, hazards, costs, development efforts, and materials choices.

Carmichael, D. C.↗

Atomic chlorine and the chlorine monoxide radical in the stratosphere - Three in situ observations

Three simultaneous observations of atomic chlorine (Cl) and the clorine monoxide radical (ClO) are reported which encompass the altitude interval between 25 and 45 kilometers. Together, Cl and ClO form a gas-phase catalytic cycle potentially capable of depleting stratospheric ozone. Observed Cl and ClO densities, although variable, imply that chlorine compounds constitute an important part of the stratospheric ozone budget. The results are compared with recent models of stratospheric photochemistry which have been used as a basis for predicting ozone depletion resulting from fluorocarbon release.

Anderson, J. G.↗