SEARCH · Search NASA

Results for “FLUX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Flux to the atmosphere of CH4 and CO2 from wetland ponds on the Hudson Bay lowlands (HBLs)

Ponds on peatlands of the Hudson Bay lowlands (HBLs) are complex ecosystems in which the fluxes to the atmosphere of CH4 and CO2 were controlled by interacting physical and biological factors. This resulted in strong diel variations of both dissolved gas concentrations and gas fluxes to the atmosphere, necessitating frequent sampling on a 24-hour schedule to enable accurate estimates of daily fluxes. Ponds at three sites on the HBL were constant net sources of CH4 and CO2 to the atmosphere at mean rates of 110-180 mg CH4 m(exp -2)/d and 3700-11,000 mg CO2 m(exp -2)/d. Rates peaked in August and September. For CH4 the pond fluxes were 3-30 times higher than adjacent vegetated surfaces. For CO2 the net pond fluxes were similar in magnitude to the vegetated fluxes but the direction of the flux was opposite, toward atmosphere. Even though ponds cover only 8-12% of the HBL area, they accounted for 30% of its total CH4 flux to the atmosphere. There is some circumstantial evidence that the ponds are being formed by decomposition of the underlying peat and that this decomposition is being stimulated by the activity of N2 fixing cyanobacteria that grow in mats at the peat-water interface. The fact that the gas fluxes from the ponds were so different from the surrounding vegetated surfaces means that any change in the ratio of pond to vegetated area, as may occur in response to climate change, would affect the total HBL fluxes.

Hamilton, J. David↗

NASA NTRS1997

A Self-Consistent Numerical Magnetohydrodynamic (MHD) Model of Helmet Streamer and Flux-Rope Interactions: Initiation and Propagation of Coronal Mass Ejections (CMEs)

We present results for an investigation of the interaction of a helmet streamer arcade and a helical flux-rope emerging from the sub-photosphere. These results are obtained by using a three-dimensional axisymmetric, time-dependent ideal magnetohydrodynamic (MHD) model. Because of the physical nature of the flux-rope, we investigate two types of flux-ropes; (1) high density flux-rope (i.e. flux-rope without cavity), and (2) low density flux rope (i.e. flux-rope with cavity). When the streamer is disrupted by the flux-rope, it will evolve into a configuration resembling the typical observed loop-like Coronal Mass Ejection (CMES) for both cases. The streamer-flux rope system with cavity is easier to be disrupted and the propagation speed of the CME is faster than the streamer-flux rope system without cavity. Our results demonstrate that magnetic buoyancy force plays an important role in disrupting the streamer.

Wu, S. T.↗

NASA NTRS2003

Cluster electric current density measurements within a magnetic flux rope in the plasma sheet

On August 22, 2001 all 4 Cluster spacecraft nearly simultaneously penetrated a magnetic flux rope in the tail. The flux rope encounter took place in the central plasma sheet, Beta(sub i) approx. 1-2, near the leading edge of a bursty bulk flow. The "time-of-flight" of the flux rope across the 4 spacecraft yielded V(sub x) approx. 700 km/s and a diameter of approx.1 R(sub e). The speed at which the flux rope moved over the spacecraft is in close agreement with the Cluster plasma measurements. The magnetic field profiles measured at each spacecraft were first modeled separately using the Lepping-Burlaga force-free flux rope model. The results indicated that the center of the flux rope passed northward (above) s/c 3, but southward (below) of s/c 1, 2 and 4. The peak electric currents along the central axis of the flux rope predicted by these single-s/c models were approx.15-19 nA/sq m. The 4-spacecraft Cluster magnetic field measurements provide a second means to determine the electric current density without any assumption regarding flux rope structure. The current profile determined using the curlometer technique was qualitatively similar to those determined by modeling the individual spacecraft magnetic field observations and yielded a peak current density of 17 nA/m2 near the central axis of the rope. However, the curlometer results also showed that the flux rope was not force-free with the component of the current density perpendicular to the magnetic field exceeding the parallel component over the forward half of the rope, perhaps due to the pressure gradients generated by the collision of the BBF with the inner magnetosphere. Hence, while the single-spacecraft models are very successful in fitting flux rope magnetic field and current variations, they do not provide a stringent test of the force-free condition.

Slavin, J. A.↗

NASA NTRS2009

An Analysis of Moisture Fluxes into the Gulf of California

This study examines the nature of episodes of enhanced warm-season moisture flux into the Gulf of California. Both spatial structure and primary time scales of the fluxes are examined using the 40-yr ECMWF Re-Analysis data for the period 1980-2001. The analysis approach consists of a compositing technique that is keyed on the low-level moisture fluxes into the Gulf of California. The results show that the fluxes have a rich spectrum of temporal variability, with periods of enhanced transport over the gulf linked to African easterly waves on subweekly (3-8 day) time scales, the Madden-Julian oscillation (MJO) at intraseasonal time scales (20-90 day), and intermediate (10-15 day) time-scale disturbances that appear to originate primarily in the Caribbean Sea-western Atlantic Ocean. In the case of the MJO, enhanced low-level westerlies and large-scale rising motion provide an environment that favors large-scale cyclonic development near the west coast of Central America that, over the course of about 2 weeks, expands northward along the coast eventually reaching the mouth of the Gulf of California where it acts to enhance the southerly moisture flux in that region. On a larger scale, the development includes a northward shift in the eastern Pacific ITCZ, enhanced precipitation over much of Mexico and the southwestern United States, and enhanced southerly/southeasterly fluxes from the Gulf of Mexico into Mexico and the southwestern and central United States. In the case of the easterly waves, the systems that reach Mexico appear to redevelop/reorganize on the Pacific coast and then move rapidly to the northwest to contribute to the moisture flux into the Gulf of California. The most intense fluxes into the gulf on these time scales appear to be synchronized with a midlatitude short-wave trough over the U.S. West Coast and enhanced low-level southerly fluxes over the U.S. Great Plains. The intermediate (10-15 day) time-scale systems have zonal wavelengths roughly twice that of the easterly waves, and their initiation appears to be linked to an extratropical U.S. East Coast ridge and associated northeasterly winds that extend well into the Caribbean Sea during their development phase. The short (3-8 day) and, to a lesser extent, the intermediate (10-15 day) time-scale fluxes tend to be enhanced when the convectively active phase of the MJO is situated over the Americas.

Wu, Man-Li C.↗

NASA NTRS2010

The Evolution of Open Magnetic Flux Driven by Photospheric Dynamics

The coronal magnetic field is of paramount importance in solar and heliospheric physics. Two profoundly different views of the coronal magnetic field have emerged. In quasi-steady models, the predominant source of open magnetic field is in coronal holes. In contrast, in the interchange model, the open magnetic flux is conserved, and the coronal magnetic field can only respond to the photospheric evolution via interchange reconnection. In this view the open magnetic flux diffuses through the closed, streamer belt fields, and substantial open flux is present in the streamer belt during solar minimum. However, Antiochos and co-workers, in the form of a conjecture, argued that truly isolated open flux cannot exist in a configuration with one heliospheric current sheet (HCS) - it will connect via narrow corridors to the polar coronal hole of the same polarity. This contradicts the requirements of the interchange model. We have performed an MHD simulation of the solar corona up to 20R solar to test both the interchange model and the Antiochos conjecture. We use a synoptic map for Carrington Rotation 1913 as the boundary condition for the model, with two small bipoles introduced into the region where a positive polarity extended coronal hole forms. We introduce flows at the photospheric boundary surface to see if open flux associated with the bipoles can be moved into the closed-field region. Interchange reconnection does occur in response to these motions. However, we find that the open magnetic flux cannot be simply injected into closed-field regions - the flux eventually closes down and disconnected flux is created. Flux either opens or closes, as required, to maintain topologically distinct open and closed field regions, with no indiscriminate mixing of the two. The early evolution conforms to the Antiochos conjecture in that a narrow corridor of open flux connects the portion of the coronal hole that is nearly detached by one of the bipoles. In the later evolution, a detached coronal hole forms, in apparent violation of the Antiochos conjecture. Further investigation reveals that this detached coronal hole is actually linked to the extended coronal hole by a separatrix footprint on the photosphere of zero width. Therefore, the essential idea of the conjecture is preserved, if we modify it to state that coronal holes in the same polarity region are always linked, either by finite width corridors or separatrix footprints. The implications of these results for interchange reconnection and the sources of the slow solar wind are briefly discussed.

Linker, Jon A.↗

NASA NTRS2010

Ocean Winds and Turbulent Air-Sea Fluxes Inferred From Remote Sensing

Air-sea turbulent fluxes determine the exchange of momentum, heat, freshwater, and gas between the atmosphere and ocean. These exchange processes are critical to a broad range of research questions spanning length scales from meters to thousands of kilometers and time scales from hours to decades. Examples are discussed (section 2). The estimation of surface turbulent fluxes from satellite is challenging and fraught with considerable errors (section 3); however, recent developments in retrievals (section 3) will greatly reduce these errors. Goals for the future observing system are summarized in section 4. Surface fluxes are defined as the rate per unit area at which something (e.g., momentum, energy, moisture, or CO Z ) is transferred across the air/sea interface. Wind- and buoyancy-driven surface fluxes are called surface turbulent fluxes because the mixing and transport are due to turbulence. Examples of nonturbulent processes are radiative fluxes (e.g., solar radiation) and precipitation (Schmitt et al., 2010). Turbulent fluxes are strongly dependent on wind speed; therefore, observations of wind speed are critical for the calculation of all turbulent surface fluxes. Wind stress, the vertical transport of horizontal momentum, also depends on wind direction. Stress is very important for many ocean processes, including upper ocean currents (Dohan and Maximenko, 2010) and deep ocean currents (Lee et al., 2010). On short time scales, this horizontal transport is usually small compared to surface fluxes. For long-term processes, transport can be very important but again is usually small compared to surface fluxes.

Bourassa, Mark A.↗

NASA NTRS2019

Is There an Optimal CO2 Partial Column for Flux Inversions?

The fidelity of flux estimates from an atmospheric inversion depends on the ability of atmospheric transport models to simulate the measured quantity. For species such as CO2, with surface fluxes and a large network of surface measurements, this means correctly simulating the dynamics of the planetary boundary layer (PBL), which is one of the most uncertain aspects of atmospheric transport modeling. In contrast, the simulated total column average mole fraction of CO2 (XCO2) is largely insensitive to simulated PBL dynamics. Therefore, measurements of XCO2 provided by current and future short wave infrared (SWIR) greenhouse gas (GHG) satellites such as GOSAT and the OCO family would seem to be more appropriate to flux inversions, as far as minimizing transport model errors (the "noise") is concerned. Unfortunately, the flux-induced variation of CO2 (the "signal") is the largest within the PBL and smallest in XCO2. Therefore, assimilating XCO2 as opposed to PBL CO2 need not give us the strongest "signal to noise" in flux inversions. Recent work on GOSAT and OCO2 retrievals suggest that SWIR satellite spectra may be used to estimate a lower partial column CO2, which could be assimilated in a flux inversion, instead of XCO2.Here we report on a study to assess whether there is an optimal partial column average CO2, intermediate between PBL CO2 and XCO2, whose assimilation might yield the best signal to noise in flux inversions, where (as before) "signal" is the flux-induced variation and "noise" is the error in transport modeling. We simulate atmospheric CO2 with five different global transport models and a common surface CO2 flux over ten years. We consider the spread across the five models to be a proxy for transport model error (the "noise"), and the common variation of CO2 in all five models to be a proxy for the "signal". We compare these signals and noises at different spatiotemporal scales for different partial column specifications to investigate whether there exists an optimal partial column that has large surface flux-driven variations and yet is relatively insensitive to errors in transport models. Finally, we comment on the feasibility of estimating such a partial column from current and future SWIR GHG satellites in the light of recent work on vertically resolved CO2 from current SWIR GHG satellites.

Basu, Sourish↗

NASA NTRS2020

Uncertainties in CERES Top-of-Atmosphere Fluxes Caused by Changes in Accompanying Imager

The Clouds and the Earth’s Radiant Energy System (CERES) project provides observations of Earth’s radiation budget using measurements from CERES instruments on board the Terra, Aqua, Suomi National Polar-orbiting Partnership (S-NPP), and NOAA-20 satellites. The CERES top-of-atmosphere (TOA) fluxes are produced by converting radiance measurements using empirical angular distribution models, which are functions of cloud properties that are retrieved from imagers flying with the CERES instruments. As the objective is to create a long-term climate data record, not only calibration consistency of the six CERES instruments needs to be maintained for the entire time period, it is also important to maintain the consistency of other input data sets used to produce this climate data record. In this paper, we address aspects that could potentially affect the CERES TOA flux data quality. Discontinuities in imager calibration can affect cloud retrieval which can lead to erroneous flux trends. When imposing an artificial 0.6 per decade decreasing trend to cloud optical depth, which is similar to the trend difference between CERES Edition 2 and Edition 4 cloud retrievals, the decadal SW flux trend changed from −0.3 5 ± 0.18 Wm −2 to 0.61 ± 0.18 Wm −2 . This indicates that a 13% change in cloud optical depth results in about 1% change in the SW flux. Furthermore, different CERES instruments provide valid fluxes at different viewing zenith angle ranges, and including fluxes derived at the most oblique angels unique to S-NPP (>66 ∘ ) can lead to differences of 0.8 Wm −2 and 0.3 Wm −2 in global monthly mean instantaneous SW flux and LW flux. To ensure continuity, the viewing zenith angle ranges common to all CERES instruments (<66 ∘ ) are used to produce the long-term Earth’s radiation budget climate data record. The consistency of cloud properties retrieved from different imagers also needs to be maintained to ensure the TOA flux consistency.

Wenying Su↗

NASA NTRS2020

Attribution of Chemistry-Climate Model Initiative (CCMI) Ozone Radiative Flux Bias from Satellites

The top-of-atmosphere (TOA) outgoing longwave flux over the 9.6-μm ozone band is a fundamental quantity for understanding chemistry-climate coupling. However, observed TOA fluxes are hard to estimate as they exhibit considerable variability in space and time that depend on the distributions of clouds, ozone (O3), water vapor (H2O), air temperature (Ta), and surface temperature (Ts). Benchmarking present day fluxes and quantifying the relative influence of their drivers is the first step for estimating climate feedbacks from ozone radiative forcing and predicting radiative forcing evolution. To that end, we constructed observational instantaneous radiative kernels (IRKs) under clear-sky conditions, representing the sensitivities of the TOA flux in the 9.6-μm ozone band to the vertical distribution of geophysical variables, including O3, H2O, Ta, and Ts based upon the Aura Tropospheric Emission Spectrometer (TES) measurements. Applying these kernels to present-day simulations from the Chemistry-Climate Model Initiative (CCMI) project as compared to a 2006 reanalysis assimilating satellite observations, we show that the models have large differences in TOA flux, attributable to different geophysical variables. In particular, model simulations continue to diverge from observations in the tropics, as reported in previous studies of the Atmospheric Chemistry Climate Model Inter-comparison Project (ACCMIP) simulations. The principal culprits are tropical mid and upper tropospheric ozone followed by tropical lower tropospheric H2O. Five models out of the eight studied here have TOA flux biases exceeding 100 mWm-2 attributable to tropospheric ozone bias. Another set of five models have flux biases over 50 mWm-2 due to H2O. On the other hand, Ta radiative bias is negligible in all models (no more than 30 mWm-2). We found that AM3 and CMAM have the lowest TOA flux biases globally but are a result of cancellation of opposite biases due to difference processes. Overall, the multi-model ensemble mean bias is –133±98 mWm-2, indicating that they are too atmospherically opaque due to trapping too much radiation in the atmosphere by overestimated tropical tropospheric O3 and H2O. Having too much O3 and H2O in the troposphere would have different impacts on the sensitivity of TOA flux to O3 and these competing effects add more uncertainties on the ozone radiative forcing. We find that the inter-model TOA outgoing longwave radiation (OLR) difference is well anti-correlated with their ozone band flux bias. This suggests that there is significant radiative compensation in the calculation of model outgoing longwave radiation.

Aura Tropospheric Emission Spectrometer (TES) meas↗

NASA NTRS2021

Integrating continuous atmospheric boundary layer and tower-based flux measurements to advance understanding of land-atmosphere interactions

The atmospheric boundary layer mediates the exchange of energy, matter, and momentum between the land surface and the free troposphere, integrating a range of physical, chemical, and biological processes and is defined as the lowest layer of the atmosphere (ranging from a few meters to 3 km). In this review, we investigate how continuous, automated observations of the atmospheric boundary layer can enhance the scientific value of co-located eddy covariance measurements of land-atmosphere fluxes of carbon, water, and energy, as are being made at FLUXNET sites worldwide. We highlight four key opportunities to integrate tower-based flux measurements with continuous, long-term atmospheric boundary layer measurements: (1) to interpret surface flux and atmospheric boundary layer exchange dynamics and feedbacks at flux tower sites, (2) to support flux footprint modelling, the interpretation of surface fluxes in heterogeneous and mountainous terrain, and quality control of eddy covariance flux measurements, (3) to support regional-scale modeling and upscaling of surface fluxes to continental scales, and (4) to quantify land-atmosphere coupling and validate its representation in Earth system models. Adding a suite of atmospheric boundary layer measurements to eddy covariance flux tower sites, and supporting the sharing of these data to tower networks, would allow the Earth science community to address new emerging research questions, better interpret ongoing flux tower measurements, and would present novel opportunities for collaborations between FLUXNET scientists and atmospheric and remote sensing scientists.

Manuel Helbig↗

NASA NTRSDate not supplied

Towards a More Realistic Representation of NASA CERES-derived Surface Radiative Fluxes during Polar Night: A Comparison with the MOSAiC Field Campaign

The Arctic remains one of the more difficult regions observe, and so satellite observations are a critical tool for observing the region, such as those from Clouds and the Earth’s Radiant Energy System (CERES). But validating the satellite surface radiative flux estimates is difficult because of the lack of in situ measurements. The extensive high-quality surface radiative flux and meteorological measurements collected from MOSAiC provide a useful check on flux retrievals from CERES instruments. We compare MOSAiC and CERES surface radiative fluxes during October through March of 2019-2020 using the large set of meteorological measurements also collected by MOSAiC, specifically cloud properties. Previous work identified a significant source of error in the CERES estimate of surface downwelling longwave flux as the estimate of low level cloud amount when compared with MOSAiC W-band radar measurements. Continuing this work, we examine the effects of errors in cloud water path on surface radiative fluxes. When using all cloud conditions, errors in cloud water are also significantly correlated with surface radiative flux errors, though the size off the effect is only about half that of cloud amount. But when considering low cloud conditions only, the effects of cloud water and cloud amount are comparable. We compare MOSAiC and CERES surface radiative fluxes during October through March of 2019-2020 using the large set of meteorological measurements also collected by MOSAiC, specifically cloud properties. Previous work identified a significant source of error in the CERES estimate of surface downwelling longwave flux as the estimate of low level cloud amount when compared with MOSAiC W-band radar measurements. We further examine this source of error by examining selected case studies in which the disagreements in radiative fluxes and clouds are large.

J Brant Dodson↗

NASA NTRS2023

The Eruption of A Magnetic Flux Rope Observed By Solar Orbiter and Parker Solar Probe

Magnetic flux ropes are a key component of coronal mass ejections, forming the core of these eruptive phenomena. However, determining whether a flux rope is present prior to eruption onset and, if so, the rope's handedness and the number of turns that any helical field lines make is difficult without magnetic field modeling or in situ detection of the flux rope. We present two distinct observations of plasma flows along a filament channel on 2022 September 4 and 5 made using the Solar Orbiter spacecraft. Each plasma flow exhibited helical motions in a right-handed sense as the plasma moved from the source active region across the solar disk to the quiet Sun, suggesting that the magnetic configuration of the filament channel contains a flux rope with positive chirality and at least one turn. The length and velocity of the plasma flow increased from the first to the second observation, suggesting evolution of the flux rope, with the flux rope subsequently erupting within ∼5 hr of the second plasma flow. The erupting flux rope then passed over the Parker Solar Probe spacecraft during its encounter (13), enabling in situ diagnostics of the structure. Although complex and consistent with the flux rope erupting from underneath the heliospheric current sheet, the in situ measurements support the inference of a right-handed flux rope from remote-sensing observations. These observations provide a unique insight into the eruption and evolution of a magnetic flux rope near the Sun.

David M. Long↗

NASA NTRS2023

Investigating the Role of Incident Ion Flux in Solar Wind Space Weathering of Carbon-Rich Asteroidal Regolith Via H+ and He+ Irradiation of the Murchison Meteorite

We present results from a set of low and high flux 1 keV/amu H + and He + irradiation experiments performed on slabs of the Murchison CM2 carbonaceous chondrite. The low flux conditions for H + and He + irradiation were ~1-1.5 orders of magnitude lower than the high flux conditions, and each experiment was irradiated to a total fluence between ~3 × 10 16 to ~6 × 10 16 ions/cm 2 . Irradiation-induced changes in the surface chemistry and optical properties of the Murchison samples were evaluated using in situ X-ray photoelectron spectroscopy (XPS) and visible and near-infrared spectroscopy (VNIR). We characterized the microstructure and composition of ion damaged rims in focused ion beam (FIB) cross-sections extracted from olivine and matrix material in each irradiated Murchison slab using transmission electron microscopy (TEM). XPS results suggest that both low flux and high flux H + and He + irradiation cause minor sputtering of surface carbon as well as a reduction in the valence state of iron, from Fe 3+ to Fe 2+ . Slope bluing is observed in VNIR spectra of the irradiated samples which may reflect carbonization and dehydrogenation of organic species and contrasts with reddening trends associated with npFe 0 formation. Although we do not observe a strong flux-dependence on the crystallinity of ion-damaged olivine, TEM analyses reveal a variety of microstructures in all olivine FIB-sections, suggesting that crystallographic orientation affects amorphization efficiency. Analyses of matrix FIB-sections indicate that phyllosilicate alteration is mainly driven by He+ irradiation, where the higher incident flux leads to greater amorphization and the formation of more distinct ion-damaged layers, similar to smooth layers in returned Ryugu particles. TEM results also provide some evidence that higher ion flux leads to greater vesiculation, with He + irradiation being more efficient at vesiculation than H + irradiation, and that higher ion flux may promote the segregation of Mg and Si into laterally extensive lenses and layers in olivine samples. We discuss the implications of these findings for constraining the role that ion flux plays in the development of space weathering characteristics in silicate phases present in carbonaceous asteroidal regoliths. These results will be important for understanding the complexity of this process and how it operates on carbon-rich airless bodies like asteroids Bennu and Ryugu.

meteorites↗

NASA NTRSDate not supplied

How Auroral Electron Precipitations Contribute to the Formation of Electron Heat Fluxes to the Ionosphere?

Electron heat fluxes (also called electron thermal fluxes) in the ionosphere are carried by thermal electrons whose energy is below a few eV. Electron heat fluxes greatly impact on electron temperature, which is a fundamental parameter in the ionospheric dynamics. At the high latitude in the auroral regions electron heat flux is originated dominantly from the magnetosphere through high-energy electron energy fluxes. High-energy electron fluxes in the diffuse auroral region can undergo multiple backscatters between the magnetically conjugated regions of both hemispheres, and different kind of wave-particle interactions along the magnetic field line. High-energy electron fluxes in discrete auroral region can be trapped below the auroral acceleration region and can also undergo backscatter and multiple reflection. These processes, in turn, amplify super-thermal electrons (<~500-600 eV) that dominantly form electron heat fluxes through Coulomb collision between thermal electrons. Such electron heat fluxes play an important role to determine electron temperature profile in the ionosphere, which is one of the key parameters that controls the ionospheric dynamics. Thus, it is necessary to include electron heat flux as a topside energy input in all global ionospheric models. We demonstrate all above results based on Superthermal Electron Transport (STET), Superthermal Proton, Electron and Atomic Hydrogen tRansport in the Ionosphere and Thermosphere (SPEAH-RIT), and Comprehensive Inner Magnetosphere and Ionospheres (CIMI) codes developed at NASA Goddard Space Flight Center.

George V. Khazanov↗

NASA NTRS2021

On the Relationship Between CYGNSS Surface Heat Fluxes and the Life Cycle of Low-Latitude Ocean Extratropical Cyclones

Surface latent and sensible heat fluxes are important for extratropical cyclone evolution and intensification. Because extratropical cyclone genesis often occurs at low-latitude, CYGNSS surface latent and sensible heat flux retrievals are composited to provide a mean picture of their spatial distribution in low-latitude oceanic extratropical cyclones. CYGNSSn heat fluxes are not affected by heavy precipitation and offer observations of storms with frequent revisit times. Consistent with prior results obtained for cyclones in the Gulf Stream region, the fluxes are strongest in the wake of the cold fronts, and weakest to negative in the warm sector in advance of the cold fronts. As cyclone strength increases, or mean precipitable water decreases, the maximum in surface heat fluxes increases while the minimum decreases. This impacts the changes in fluxes during cyclone intensification: the post-cold frontal surface heat flux maximum increases due to the increase in near surface winds. During cyclone dissipation, the fluxes in this sector decrease, due to the decrease in winds and in temperature and humidity contrast. The warm sector minimum decreases throughout the entire cyclone lifetime and is mostly driven by sea-air temperature and humidity contrast changes. However, during cyclone dissipation, the surface heat fluxes increase along the cold front in a narrow band to the east, independently from changes in the cyclone characteristics. This suggests that, during cyclone dissipation, energy transfers from the ocean to the atmosphere are linked to frontal in addition to synoptic-scale processes.

CYGNSS↗

NASA NTRSDate not supplied

Bridging Current Indirect and Future Direct Estimates of Convective Mass Flux Toward Quantifying the Role of Convective Cores on Anvil Area Time Tendencies

Anvil cloud spatial extent is strongly driven by convective mass flux. However, the lack of convective mass flux observations precludes global analyses of the functional relationship between anvil cloud area growth tendencies and convective areal coverage and vertical mass flux. Partly informed by analyses of a hierarchy of WRF mesoscale convective system (MCS) simulations, in this presentation, we discuss new work on estimating convective mass flux by way of an approach that casts the problem of quantifying convective mass flux into terms related to diabatic heating vertical structure, convective area and tropospheric stability. We demonstrate the usefulness of this approach at the MCS spatial scale via development of a simple, robust model that analytically connects system-scale convective mass flux and anvil cloud area growth rates. We show that the model predicts anvil area size changes in agreement with those observed in a global convective system tracking database (TOOCAN). An additional advantage of this approach for estimating convective mass flux is that it bridges future satellite mission plans for directly observing convective mass flux (e.g., AOS) with longer-record observations made by TRMM, GPM and satellite sounder mission data (the latter used for estimating stability) that, when combined, can be used for inferring convective mass fluxes at the MCS spatial scale spanning slowly changing, diverse environments. An evaluation and bridging of both direct and indirect approaches supports convective process analyses varying over longer time periods in this “era of convection.”

convective mass flux↗

NASA NTRSDate not supplied

Bridging current indirect and future direct estimates of convective mass flux toward quantifying the role of convective cores on anvil area time tendencies

convective mass flux↗

NASA NTRS2021

Changes in TOA SW Fluxes over Marine Clouds When Estimated via Semiphysical Angular Distribution Models

Top-of-atmosphere (TOA) shortwave (SW) angular distribution models (ADMs) approximate—per angular direction of an imagined upward hemisphere—the intensity of sunlight scattered back from a specific Earth–atmosphere scene. ADMs are, thus, critical when converting satellite-borne broadband radiometry into estimated radiative fluxes. This paper applies a set of newly developed ADMs with a more refined scene definition and demonstrates tenable changes in estimated fluxes compared to currently operational ADMs. Newly developed ADMs use a semiphysical framework to consider cloud-top effective radius (¯¯R_e) and above-cloud water vapor (ACWV), in addition to accounting for surface wind speed and clouds’ phase, fraction, and optical depth. In effect, instantaneous TOA SW fluxes for marine liquid-phase clouds had the largest flux differences (of up to 25 W m−2) for lower solar zenith angles and cloud optical depth greater than 10 due to extremes in ¯¯R_e or ACWV. In regions where clouds had persistently extreme levels of ¯¯R_e (here mostly for ¯¯R_e < 7μm and ¯¯R_e > 15μm) or ACWV, instantaneous fluxes estimated from Aqua, Terra, Meteosat-8, and Meteosat-9 satellites using the two ADMs differed systematically, resulting in significant deviations in daily mean fluxes (up to ±10 W m^(−2)) and monthly mean fluxes (up to ±5 W m^(−2)). Flux estimates using newly developed, semiphysical ADMs may contribute to a better understanding of solar fluxes over low-level clouds. It remains to be seen whether aerosol indirect effects are impacted by these updates.

angular distribution models (ADMs)↗