Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fast Ignition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Effects of discharge voltage waveform on the discharge characteristics in a helium atmospheric plasma jet

We present here an analysis of the discharge characteristics of a He plasma jet operating under three different types of applied voltage waveform: (a) a μs-pulse voltage waveform with a slow voltage rise time, (b) ns-pulse, and (c) rectangular voltage waveforms with fast voltage rise time. Optical emission measurements show that the application of a voltage with a fast voltage rise time induces rapid discharge growth and, consequently, produces an abundance of energetic electrons, which in turn leads to high optical emission from the O atoms. We also estimate the optical emission efficiency of the O atom (η{sub o}), which corresponds roughly to the production efficiency of the reactive O species. η{sub o} increases with increasing applied voltage, and the highest value of η{sub o} is obtained in the shortest pulse discharge, which was ignited by a ns-pulse voltage waveform with a fast voltage rise time and short pulse width.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Plasma-assisted deflagration to detonation transition in a microchannel with fast-frame imaging and hybrid fs/ps coherent anti-Stokes Raman scattering measurements

Our study examines kinetic enhancement by nanosecond dielectric barrier discharge (ns-DBD) plasma on fuellean dimethyl ether (DME), oxygen (O 2 ), and argon (Ar) premixtures during deflagration to detonation transition (DDT) experiments in a microchannel. Non-equilibrium plasma produces active species and radicals and creates fast and slow heating of a mixture to promote ignition due to electronic and vibrational excitation. Experiments have been conducted to examine the influence of the plasma discharge on the premixture and on the resultant deflagration to detonation transition (DDT) onset time and distance through the use of high speed imaging and one-dimensional, two-beam, femtosecond/picosecond, coherent anti-Stokes Raman scattering (CARS). A highspeed camera is used to trace the time histories of flame front position and velocity and to identify the dynamics and onset of DDT. The results show that plasma discharge can nonlinearly affect the onset time and distance of DDT. It is shown that a small number of plasma discharge pulses prior to ignition result in reduced DDT onset time and distance by 60% and 40%, respectively, when compared to the results without pre-excitation by ns discharges. The results also show that an increase of plasma discharge pulses results in an extended DDT onset time and distance of 224% and 94%, respectively. Time history of the deflagration wave speed of DME and the analysis of ignition timescale under the choking condition of the deflagration front suggest low temperature ignition may play a role for DME near the isobaric choking condition of the burned gas and the DDT. Plasmainduced conversion of the reactive mixture was assessed via the O 2 to CO 2 ratio as measured through fs/ps CARS during the DBD discharges. The present experiments demonstrate the ability of non-equilibrium plasma to alter the chemistry of DME/O 2 /Ar premixtures in order to control DDT for applications in advanced propulsion engines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2005

Dielectric Constant Measurements for Characterizing Lunar Soils

The return to the Moon has ignited the need to characterize the lunar regolith using fast, reliable in-situ methods. Characterizing the physical properties of the rocks and soils can be very difficult because of the many complex parameters that influence the measurements. In particular, soil electrical property measurements are influenced by temperature, mineral type, grain size, porosity, and soil conductivity. Determining the dielectric constant of lunar materials may be very important in providing quick characterization of surface deposits, especially for the Moon. A close examination of the lunar regolith samples collected by the Apollo astronauts indicates that the rocks and soils on the Moon are dominated by silicates and oxides. In this presentation, we will show that determining the dielectric constant measurements can provide a simple, quick detection method for minerals that contain titanium, iron, and water. Their presence is manifest by an unusually large imaginary permittivity.

Anderson, Robert C.↗
NASA NTRSDate not supplied

Opposed Flame Spreading Along a Structured PMMA Sample in Exploration Atmosphere Under Microgravity

As part of SAFFIRE V experiments on the ISS supply spacecraft CYGNUS, flame propagation along different surface structures on a PMMA sample was investigated in opposed flow. The sample was 200 x 400 mm (length x width) with a thickness of 10 mm and contained ribs of different widths (1-10 mm), each 3 mm high, on both sides, arranged in the flow direction. The total thickness of the specimen was thus 16 mm for the ribs. For the first 360 s after ignition with a Kanthal wire, the flow velocity was 20 cm/s in the opposed direction. Then the flow velocity was reduced to 5 cm/s for a duration of 300 s before it was switched off to terminate the experiment. The experimental pressure was 761 hPa and the oxygen concentration was 26.9 vol %. These conditions correspond to atmospheric conditions envisioned for future exploration missions. It was found that the flames ignited downstream propagated forward along the rib edges surprisingly fast with up to 0.88 mm/s (1 mm rib width). Also, it was observed that the wider the rib, the slower the propagation. The widest rib (10 mm) already showed two largely independent edge flames. Unintentionally, the experiment showed how sensitive the flames are to small perturbations of the flow field, as remnants of a preceding and upstream experiment disturbed the incoming flow stratification partially.

microgravity↗
NASA NTRSDate not supplied

Opposed flame spreading along a structured PMMA-sample in exploration atmosphere under microgravity

As part of SAFFIRE V experiments on the ISS supply spacecraft CYGNUS, flame propagation along different surface structures on a PMMA sample was investigated in opposed flow. The sample was 200 x 400 mm (length x width) with a thickness of 10 mm and contained ribs of different widths (1-10 mm), each 3 mm high, on both sides, arranged in the flow direction. The total thickness of the specimen was thus 16 mm for the ribs. For the first 360 s after ignition with a Kanthal wire, the flow velocity was 20 cm/s in the opposed direction. Then the flow velocity was reduced to 5 cm/s for a duration of 300 s before it was switched off to terminate the experiment. The experimental pressure was 761 hPa and the oxygen concentration was 26.9 vol %. These conditions correspond to atmospheric conditions envisioned for future exploration missions. It was found that the flames ignited downstream propagated forward along the rib edges surprisingly fast with up to 0.88 mm/s (1 mm rib width). Also, it was observed that the wider the rib, the slower the propagation. The widest rib (10 mm) already showed two largely independent edge flames. Unintentionally, the experiment showed how sensitive the flames are to small perturbations of the flow field, as remnants of a preceding and upstream experiment disturbed the incoming flow stratification partially.

fire safety↗
NASA NTRS1986

Ignition of bulk 302 stainless steel in oxygen by laser heating

The effect of oxygen pressure on the ignition temperature of cylindrical 302 SS specimens ignited by a focused CW CO2 laser beam in a cool, static, oxygen environment was investigated. The ignition temperature was determined quantitatively from the specimen temperature history obtained from a fast response, near infrared, two-color pyrometer, which recorded the temperature history of a spot approximately 0.5 mm in diameter and located at the center of the cylindrical 302 SS specimen's top surface. Ignition and combustion occurred in three stages. The first stage began with specimen heating and ended with ignition, the second stage corresponded to combustion, and the third stage represented cooling. The physical changes that occurred in the first stage are described.

Nguyen, K.↗
DOE OSTI2016

Combustion chemistry of ethanol: Ignition and speciation studies in a rapid compression facility [On the combustion chemistry of ethanol: Ignition and speciation studies in a rapid compression facility]

Here, ethanol remains the most important alternative fuel for the transportation sector. This work presents new experimental data on ethanol ignition, including stable species measurements, obtained with the University of Michigan rapid compression facility. Ignition delay times were determined from pressure histories of ignition experiments with stoichiometric ethanol–air mixtures at pressures of ~3–10 atm. Temperatures (880–1150 K) were controlled by varying buffer gas composition (Ar, N 2 , CO 2 ). High-speed imaging was used to record chemiluminescence during the experiments, which showed homogeneous ignition events. The results for ignition delay time agreed well with trends on the basis of previous experimental measurements. Speciation experiments were performed using fast gas sampling and gas chromatography to identify and quantify ethanol and 11 stable intermediate species formed during the ignition delay period. Simulations were carried out using a chemical kinetic mechanism available in the literature, and the agreement with the experimental results for ignition delay time and the intermediate species measured was excellent for the majority of the conditions studied. From the simulation results, ethanol + HO 2 was identified as an important reaction at the experimental conditions for both the ignition delay time and intermediate species measurements. Further studies to improve the accuracy of the rate coefficient for ethanol + HO 2 would improve the predictive understanding of intermediate and low-temperature ethanol combustion.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Measurements of fusion reaction history in inertially confined burning plasmas

Direct evidence of inertially confined fusion ignition appears in the abrupt temperature increase and consequent rapid increase in the thermonuclear burn rate as seen in the reaction history. The Gamma Reaction History (GRH) and Gas Cherenkov Detector (GCD) diagnostics are γ-based Cherenkov detectors that provide high quality measurements of deuterium–tritium fusion γ ray production and are, thus, capable of monitoring the thermonuclear burn rate. Temporal shifts in both peak burn time and burn width have been observed during recent high-yield shots (yields greater than 1017 neutrons) and are essential diagnostic signatures of the ignition process. While the current GRH and GCD detectors are fast enough to sense the changes of reaction history due to alpha heating, they do not have enough dynamic range to capture the onset of alpha heating. The next generation of instrumentation, GRH-15m, is proposed to increase the yield-rate coverage to measure the onset of alpha-heating.

42 ENGINEERING↗
DOE OSTI2016

A recoverable gas-cell diagnostic for the National Ignition Facility

The high-fluence neutron spectrum produced by the National Ignition Facility (NIF) provides an opportunity to measure the activation of materials by fast-spectrum neutrons. A new large-volume gas-cell diagnostic has been designed and qualified to measure the activation of gaseous substances at the NIF. This in-chamber diagnostic is recoverable, reusable and has been successfully fielded. Data from the qualification of the diagnostic have been used to benchmark an Monte Carlo N-Particle Transport Code simulation describing the downscattered neutron spectrum seen by the gas cell. We present early results from the use of this diagnostic to measure the activation of {sup nat}Xe and discuss future work to study the strength of interactions between plasma and nuclei.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Ultra-fast single-crystal CVD diamonds in the particle time-of-flight (PTOF) detector for low yield burn-history measurements on the NIF (invited)

The Particle Time of Flight (PTOF) diagnostic is a chemical vapor deposition diamond-based detector and is the only diagnostic for measuring nuclear bang times of low yield (<1013) shots on the National Ignition Facility. Recently, a comprehensive study of detector impulse responses revealed certain detectors with very fast and consistent impulse responses with a rise time of <50 ps, enabling low yield burn history measurements. At the current standoff of 50 cm, this measurement is possible with fast 14 MeV neutrons from deuterium–tritium (DT) fusion plasmas. PTOF-inferred DT burn width numbers compare well with widths inferred from the gamma reaction history diagnostic on mid-yield (1013–1015) shots, where both systems are capable of making this measurement. These new capabilities could be extended to 2.5 MeV deuterium–deuterium neutrons from D plasmas and to even lower yield by reducing the detector standoff distance to 10 cm; a design for this is also presented.

42 ENGINEERING↗
DOE OSTI2021

Diagnosing Thermonuclear Burn in Fusion Implosions using Ultra-Fast Gas Cherenkov Detectors [Slides]

This presentations addresses these questions. What is fusion and what is ignition? How does LASER driven Inertial Confinement Fusion work? What can we measure and what does it tell us about fusion? How do Gas Cherenkov detectors work and what do they tell us? What are our plans for the future? In brief, the take away messages for this presentation are as follows: DT fusion reaction history provides crucial physics for ICF; gamma reaction history diagnostics are ready to resolve burn width on ignition shots; and GCDs have a lot of potential solving some of the questions related to fusion science.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A Computational Study of the Thermodynamic Conditions Leading to Autoignition in Nanosecond Pulsed Discharges

Nanosecond pulsed discharges have attracted the attention of engine manufacturers due to the possibility of attaining distributed ignition sites that accelerate burn rates while resulting in very little electrode erosion. Multidimensional modeling tools currently capture the electrical structure of such discharges accurately, but resolving the chemical structure remains a challenging problem owing to the disparity of time-scales in streamer propagation (nanoseconds) and ignition phenomena (microseconds). The purpose of this study is to extend multidimensional results toward resolving the chemical structure in the wake of streamers (or the afterglow) by using a batch reactor model (BRM). This can afford the use of very detailed chemical kinetic information. The full nonequilibrium nature of the electrons is taken into account, along with fast gas heating, shock wave propagation, and thermal diffusion. The results shed light on ignition phenomena brought about by such discharges.

42 ENGINEERING↗
DOE OSTI2020

A computational study of the thermodynamic conditions leading to autoignition in nanosecond pulsed discharges

Nanosecond pulsed discharges have attracted the attention of engine manufacturers due to the possibility of attaining distributed ignition sites that accelerate burn rates while resulting in very little electrode erosion. Multidimensional modeling tools currently capture the electrical structure of such discharges accurately, but resolving the chemical structure remains a challenging problem owing to the disparity of time-scales in streamer propagation (nanoseconds) and ignition phenomena (microseconds). The purpose of this study is to extend multidimensional results towards resolving the chemical structure in the wake of streamers (or the afterglow) by using a batch reactor model. This can afford the use of very detailed chemical kinetic information. The full non-equilibrium nature of the electrons is taken into account, along with fast gas heating, shock wave propagation, and thermal diffusion. The results shed light on ignition phenomena brought about by such discharges.

ignition, plasma, kinetics↗
DOE OSTI2014

Experimental investigation of piston heat transfer under conventional diesel and reactivity-controlled compression ignition combustion regimes

The piston of a heavy-duty single-cylinder research engine was instrumented with 11 fast-response surface thermocouples, and a commercial wireless telemetry system was used to transmit the signals from the moving piston. The raw thermocouple data were processed using an inverse heat conduction method that included Tikhonov regularization to recover transient heat flux. By applying symmetry, the data were compiled to provide time-resolved spatial maps of the piston heat flux and surface temperature. A detailed comparison was made between conventional diesel combustion and reactivity-controlled compression ignition combustion operations at matched conditions of load, speed, boost pressure, and combustion phasing. The integrated piston heat transfer was found to be 24% lower, and the mean surface temperature was 25 C lower for reactivity-controlled compression ignition operation as compared to conventional diesel combustion, in spite of the higher peak heat release rate. Lower integrated piston heat transfer for reactivity-controlled compression ignition was found over all the operating conditions tested. The results showed that increasing speed decreased the integrated heat transfer for conventional diesel combustion and reactivity-controlled compression ignition. The effect of the start of injection timing was found to strongly influence conventional diesel combustion heat flux, but had a negligible effect on reactivity-controlled compression ignition heat flux, even in the limit of near top dead center high-reactivity fuel injection timings. These results suggest that the role of the high-reactivity fuel injection does not significantly affect the thermal environment even though it is important for controlling the ignition timing and heat release rate shape. The integrated heat transfer and the dynamic surface heat flux were found to be insensitive to changes in boost pressure for both conventional diesel combustion and reactivity-controlled compression ignition. However, for reactivity-controlled compression ignition, the mean surface temperature increased with changes in boost suggesting that equivalence ratio affects steady-state heat transfer.

Splitter, Derek A↗
DOE OSTI2025

Enabling Low-Temperature (LTP) Ignition Technologies for Multi-Mode Engines through the Development of a Validated High-Fidelity LTP Model for Predicative Simulations Tools

The goal of multi-mode engine architectures is to extend current lean-burn dilution limits with renewable fuels, which requires spark plugs to deposit high energies (hundreds of mJ) in order to initiate ignition and complete combustion. At elevated energy deposition rates, spark plugs experience increased electrode erosion and thermal losses, which ultimately shortens the spark-plug lifetime and lowers ignition efficiency. As such, in order to safeguard the efficiency gains of multi-mode concepts, new and improved ignition technologies are required. Recently, non-equilibrium low-temperature plasmas (LTP) have been shown to promote energy-efficient ignition via quenching and transport of electronically excited atoms and molecules, selective radical production and fast heating of hydrocarbon/air mixtures [1-2]. Thus, LTP is seen as a technology that can potentially improve the energy extraction efficiency of fuels, while enabling kinetically controlled combustion modes towards fuel leaner conditions to realize current DOE VTO goals of improving the sustainability of future mobility [3]. Although many previous studies have demonstrated the efficacy of plasma-assisted ignition to enhance combustion, the detailed enhancement mechanisms remain largely unknown, especially for oxygenated fuels and at elevated pressures that are most relevant to practical engine conditions. These barriers hinder the development of accurate and comprehensive numerical models that seek to describe LTP-based ignition in existing engine design software tools and methods. Current state-of-the-art simulation capabilities for LTP ignition systems are in need of improvements since they deliver qualitative results only due to important limitations of existing approaches. Firstly, validated kinetic models with elementary steps for plasma discharges in oxygenated fuel/air mixtures of relevance to the transportation sector are required. Such kinetic models do not exist at present and will be developed and validated within this project. Secondly, plasma discharges and reactive mixture ignition are multi-scale, unsteady processes requiring high-performance numerical methods and software that execute efficiently on DOE supercomputers. Such software does not exist at present and will be developed and applied to practical LTP ignition scenarios as part of this project. Thirdly, experimental databases that are tailored to serve as benchmark in support of the development of predictive computational models of LTP ignition do not exist and will be part of this project.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2018

The DISTINCTIVE University Consortium: Transforming High Activity Materials Research in the UK - 18212

The DISTINCTIVE consortium (Decommissioning, Immobilisation and Storage Solutions for Nuclear Waste Inventories) is a partnership of 11 research universities, working to decommission and clean up the legacy of civil nuclear energy generation, sponsored by the Engineering and Physical Sciences Research Council (EPSRC). An important component of the research programme is to develop the skills and facilities to address key research questions, requiring the use of highly radioactive materials. Here we highlight the outcomes of four research projects in which access to state of the art research facilities for working with radioactive materials, supported by international partnerships, has advanced research in plutonium storage and immobilisation, and the disposal of spent nuclear fuels. First, we have developed a viable formulation and process for immobilisation of the UK plutonium stockpile, including commissioning of a radiological hot isostatic press and validation studies using plutonium-239. Second, we have further underpinned the interim storage of PuO{sub 2}, through understanding of water and chlorine sorption / desorption, pertinent to the historic practice of containment within, and degradation of PVC bags. Third, we have developed a novel methodology to investigate the in situ radiolysis induced dissolution of actinide oxide thin films, using synchrotron radiation, to underpin the geological disposal of spent nuclear fuel. Fourth we monitored in situ the oxidation and self-ignition mechanism of uranium carbide, a legacy fuel from the Dounreay Prototype Fast Reactor that is waiting for oxidation treatment prior to permanent storage and/or disposal. Through this programme of research, the DISTINCTIVE consortium is rebuilding the UK capability for research with transuranic materials, which, hitherto, was eroded over decades of disinvestment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2013

Strong shock generation by fast electron energy deposition

It has been suggested that fast electrons may play a beneficial role in the formation of the ignitor shock in shock ignition owing to the high areal density of the fuel at the time of the ignitor pulse. In this paper, we extend previous studies which have focused on monoenergetic electron sources to populations with extended energy distributions. In good agreement with analytic scalings, we show that strong shocks can be produced with peak pressures of a few hundred Mbar to over 1 Gbar using fast electron intensities of 1–10 PW/cm{sup 2} in a uniform deuterium-tritium plasma at 10 g/cm{sup 3}. However, the length required for shock formation increases with fast electron temperature. As this shock formation distance becomes comparable to the target size, the shock is not able to fully develop, and this implies a limit on the ability of fast electrons to aid shock formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

An ultra-fast method for generating synthetic down-scattered neutron data for inertial confinement fusion implosions

In inertial confinement fusion experiments at the National Ignition Facility, asymmetries are probed by a variety of neutron diagnostics, including neutron imaging systems, real-time neutron activation diagnostics (RTNADs), and neutron spectrometers. It is often useful to generate synthetic data based on these diagnostics to validate and tune models. However, current methods of doing so using Monte Carlo particle tracing are time-consuming. In this paper, an ultra-fast method is presented for generating synthetic neutron images, RTNAD data, and spectrometry data using line integrals and 3D convolutions. While it does not contain as much physics as particle tracing codes, it is thousands of times faster and produces nearly identical data. This enables analysis techniques that depend on generating large amounts of synthetic data, which will prove very useful for the study of asymmetries going forward.

Deuterium↗