Search NASA⌕ Search

SEARCH · Search NASA

Results for “Finite element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

A finite-element method for large-amplitude, two-dimensional panel flutter at hypersonic speeds

The nonlinear flutter behavior of a two-dimensional panel in hypersonic flow is investigated analytically. An FEM formulation based unsteady third-order piston theory (Ashley and Zartarian, 1956; McIntosh, 1970) and taking nonlinear structural and aerodynamic phenomena into account is derived; the solution procedure is outlined; and typical results are presented in extensive tables and graphs. A 12-element finite-element solution obtained using an alternative method for linearizing the assumed limit-cycle time function is shown to give predictions in good agreement with classical analytical results for large-amplitude vibration in a vacuum and large-amplitude panel flutter, using linear aerodynamics.

Mei, Chuh↗

ANSYS duplicate finite-element checker routine

An ANSYS finite-element code routine to check for duplicated elements within the volume of a three-dimensional (3D) finite-element mesh was developed. The routine developed is used for checking floating elements within a mesh, identically duplicated elements, and intersecting elements with a common face. A space shuttle main engine alternate turbopump development high pressure oxidizer turbopump finite-element model check using the developed subroutine is discussed. Finally, recommendations are provided for duplicate element checking of 3D finite-element models.

Ortega, R.↗

Hierarchical flux-based thermal-structural finite element analysis method

A hierarchical flux-based finite element method is developed for both a one and two dimensional thermal structural analyses. Derivation of the finite element equations is presented. The resulting finite element matrices associated with the flux based formulation are evaluated in a closed form. The hierarchical finite elements include additional degrees of freedom in the approximation of the element variable distributions by the use of nodeless variables. The nodeless variables offer increased solution accuracy without the need for defining actual nodes and rediscretizing the finite element model. Thermal and structural responses are obtained from a conventional linear finite element method and exact solutions. Results show that the hierarchical flux-based method can provide improved thermal and structural solution accuracy with fewer elements when compared to results for the conventional linear element method.

Polesky, Sandra P.↗

Element-based concrete design with three-dimensional finite element models

A shell element based design of a typical shear wall using analytical results from a three-dimensional finite element model subjected to a combination of vertical and lateral loads is evaluated. The axial and flexural force resultants from each element for every load combination are used to calculate the required reinforcing for each element. Strength for axial loads (P) and out-of-plane flexure (M) in structural walls is determined according to the same P-M interaction procedures used for columns. After each element has been evaluated, a required reinforcing map for each face of each element in the wall is presented along with a constructible reinforcement pattern enveloping the required reinforcing. In order to determine whether the element-based approach meets the requirements of the section cut approach to design, which is typically employed in manual calculations, the total in-plane moment (M) and total vertical axial force (P) across the entire length of the wall is calculated and the P-M points are plotted on an in-plane P-M interaction diagram. It is concluded that element-based design for a structural wall ensures that reinforcement is provided where required by the three-dimensional finite element analysis while still providing sufficient reinforcing to satisfy the section cut approach to design. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Final Report of the Project "From the finite element method to the virtual element method"

The Finite Element Method (FEM) is a powerful numerical tool that is being used in a large number of engineering applications. The FEM is constructed on triangular/tetrahedral and quadrilateral/hexahedral meshes. Extending the FEM to general polygonal/polyhedral meshes in straightforward way turns out to be extremely difficult and leads to very complex and computationally expensive schemes. The reason for this failure is that the construction of the basis functions on elements with a very general shape is a non-trivial and complex task. In this project we developed a new family of numerical methods, dubbed the Virtual Element Method (VEM) for the numerical approximation of partial differential equations (PDE) of elliptic type suitable to polygonal and polyhedral unstructured meshes. We successfully formulated, implemented and tested these methods and studied both theoretically and numerically their stability, robustness and accuracy for diffusion problems, convection-reaction-diffusion problems, the Stokes equations and the biharmonic equations.

97 MATHEMATICS AND COMPUTING↗

Theoretical determination of nozzle admittances using a finite element approach

A finite element method is used to predict the admittances of axisymmetric nozzles. It is assumed that the flow in the nozzle is isentropic and irrotational, and the disturbances are small so that linear analyses apply. An approximate, two dimensional compressible model is used to describe the steady flow in the nozzle. The propagation of acoustic disturbances is governed by the complete linear wave equation. The differential form of the acoustic equation is transformed to an integral equation using Galerkin's method, and Green's theorem is applied so that the acoustic boundary conditions can be introduced through the boundary residuals. A two-dimensional FEM using linear elements is used to solve the acoustic equation. A one dimensional FEM is also used to solve the reduced equation of Crocco, and the solution verifies the sufficiency of the boundary residual formulation. Comparison between computed admittances and experimental data is shown to be quite good.

Sigman, R. K.↗

Boundary control of parabolic systems - Finite-element approximation

The finite element approximation of a Dirichlet type boundary control problem for parabolic systems is considered. An approach based on the direct approximation of an input-output semigroup formula is applied. Error estimates are derived for optimal state and optimal control, and it is noted that these estimates are actually optimal with respect to the approximation theoretic properties.

Lasiecka, I.↗

High speed inviscid compressible flow by the finite element method

The finite element method and an explicit time stepping algorithm which is based on Taylor-Galerkin schemes with an appropriate artificial viscosity is combined with an automatic mesh refinement process which is designed to produce accurate steady state solutions to problems of inviscid compressible flow in two dimensions. The results of two test problems are included which demonstrate the excellent performance characteristics of the proposed procedures.

Zienkiewicz, O. C.↗

System software for the finite element machine

The Finite Element Machine is an experimental parallel computer developed at Langley Research Center to investigate the application of concurrent processing to structural engineering analysis. This report describes system-level software which has been developed to facilitate use of the machine by applications researchers. The overall software design is outlined, and several important parallel processing issues are discussed in detail, including processor management, communication, synchronization, and input/output. Based on experience using the system, the hardware architecture and software design are critiqued, and areas for further work are suggested.

Crockett, T. W.↗

Dynamic analysis of geared rotors by finite elements

A finite-element model of a geared rotor system on flexible bearings was developed. The model includes the rotary inertia of shaft elements, the axial loading on shafts, flexibility and damping of bearings, material damping of shafts and the stiffness and the damping of gear mesh. The coupling between the torsional and transverse vibrations of gears were considered in the model. A constant mesh stiffness was assumed. The analysis procedure can be used for forced vibration analysis of geared rotors by calculating the critical speeds and determining the response of any point on the shaft to mass unbalances, geometric eccentricities of gears and displacement transmission error excitation at the mesh point. The dynamic mesh forces due to these excitations can also be calculated. The model has been applied to several systems for the demonstration of its accuracy and for studying the effect of bearing compliances on system dynamics.

Kahraman, Ahmet↗

A finite element boundary integral formulation for radiation and scattering by cavity antennas using tetrahedral elements

A hybrid finite element boundary integral formulation is developed using tetrahedral and/or triangular elements for discretizing the cavity and/or aperture of microstrip antenna arrays. The tetrahedral elements with edge based linear expansion functions are chosen for modeling the volume region and triangular elements are used for discretizing the aperture. The edge based expansion functions are divergenceless thus removing the requirement to introduce a penalty term and the tetrahedral elements permit greater geometrical adaptability than the rectangular bricks. The underlying theory and resulting expressions are discussed in detail together with some numerical scattering examples for comparison and demonstration.

Gong, J.↗

The NASA/Industry Design Analysis Methods for Vibrations (DAMVIBS) Program - Boeing helicopters airframe finite element modeling

Finite-element modeling of the airframe vibration of the Army/Boeing CH-47D helicopter is conducted with comparisons to experimental data in an effort to improve the design process. A NASTRAN FEM is developed that is fully representative of the test configuration and includes the support fixture, shakers, and the aircraft/shaker suspension system. The analysis is conducted with specific attention given to the prediction of reasonable forced amplitudes throughout the airframe. Reasonable correlation is noted between the FEM and experimental results, although improved correlation can be obtained by including more accurate damping values and secondary effects such as stringer shear loading. It is shown that the general stress model does not provide an adequate dynamic analysis on which to base design improvements. A more detailed model is required that emphasizes highly detailed helicopter elements and employs a finer mesh particularly in the description of the mass distribution.

Gabel, R.↗