Search NASA⌕ Search

SEARCH · Search NASA

Results for “Forest canopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

A fully polarimetric scattering model for a coniferous forest

For an elliptically polarized plane wave exciting a coniferous forested canopy a fully polarimetric scattering model has been developed to account for the size and orientation distributions of each forest constituent. A canopy is divided into three layers over a rough interface. The upper two layers represent the crown with its constituents (leaves, stems, and branches). The lower layer stands for the trunks and the rough interface is the canopy-ground interface. For a plane wave exciting the canopy, the explicit expressions for the bistatic scattering coefficient associated with each scattering mechanism are given. For an elliptically polarized incidence wave, the present model can be recast in a form suitable for polarimetric wave synthesis. The model validation is justified by comparing the measured and the calculated values of the backscattering coefficients for a linearly polarized incident wave. The comparison is made over a wide range of frequencies and incident angles. Numerical simulations are conducted to calculate the radar polarization signature of the canopy for different incident frequencies and angles.

Karam, M. A.↗
NASA NTRS2019

Boreal Canopy Surfaces from Spaceborne Stereogrammetry

Surface elevation estimates from high resolution spaceborne image (HRSI) stereogrammetry are used to examine fine-scaled structure of boreal forest canopies. These data can depict detailed spatial patterns of vertical forest structure at remote sites across the circumpolar domain where these estimates would otherwise be unavailable. This work examines where these estimates are most effective at describing vertical forest structure to explain which canopy surfaces they represent. We evaluated the variation in canopy surface estimates captured from four general types of HRSI digital surface models (DSMs) across the full range of boreal canopy cover.

Paul M Montesano↗
NASA NTRS1992

Radar measurement of forested areas during OTTER

To test a forest ecosystem model in the OTTER (Oregon ecosystem research) project, it is desirable to find forest canopy parameters via radar remote sensing measurements. Conventionally, forest biomass, along with quantities such as the leaf area index, drive the model. It is shown that the radar backscatter is not uniquely related to biomass. A sensitivity study is carried out using a forward scattering model to determine the variation of radar cross section as a function of several forest parameters. The results are used to find suitable quantities to recover via radar experiments. A parameter estimation scheme is developed to calculate some preliminary statistical properties of the forest.

Moghaddam, M.↗
NASA NTRS2017

The Use of Sun Elevation Angle for Stereogrammetric Boreal Forest Height in Open Canopies

Stereogrammetry applied to globally available high resolution spaceborne imagery (HRSI; less than 5 m spatial resolution) yields fine-scaled digital surface models (DSMs) of elevation. These DSMs may represent elevations that range from the ground to the vegetation canopy surface, are produced from stereoscopic image pairs (stereo pairs) that have a variety of acquisition characteristics, and have been coupled with lidar data of forest structure and ground surface elevation to examine forest height. This work explores surface elevations from HRSI DSMs derived from two types of acquisitions in open canopy forests. We (1) apply an automated mass-production stereogrammetry workflow to along-track HRSI stereo pairs, (2) identify multiple spatially coincident DSMs whose stereo pairs were acquired under different solar geometry, (3) vertically co-register these DSMs using coincident spaceborne lidar footprints (from ICESat-GLAS) as reference, and(4) examine differences in surface elevations between the reference lidar and the co-registered HRSI DSMs associated with two general types of acquisitions (DSM types) from different sun elevation angles. We find that these DSM types, distinguished by sun elevation angle at the time of stereo pair acquisition, are associated with different surface elevations estimated from automated stereogrammetry in open canopy forests. For DSM values with corresponding reference ground surface elevation from spaceborne lidar footprints in open canopy northern Siberian Larix forests with slopes less than10, our results show that HRSI DSM acquired with sun elevation angles greater than 35deg and less than 25deg (during snow-free conditions) produced characteristic and consistently distinct distributions of elevation differences from reference lidar. The former include DSMs of near-ground surfaces with root mean square errors less than 0.68 m relative to lidar. The latter, particularly those with angles less than 10deg, show distributions with larger differences from lidar that are associated with open canopy forests whose vegetation surface elevations are captured. Terrain aspect did not have a strong effect on the distribution of vegetation surfaces. Using the two DSM types together, the distribution of DSM-differenced heights in forests (6.0 m, sigma = 1.4 m) was consistent with the distribution of plot-level mean tree heights (6.5m, sigma = 1.2 m). We conclude that the variation in sun elevation angle at time of stereo pair acquisition can create illumination conditions conducive for capturing elevations of surfaces either near the ground or associated with vegetation canopy. Knowledge of HRSI acquisition solar geometry and snow cover can be used to understand and combine stereogrammetric surface elevation estimates to co-register rand difference overlapping DSMs, providing a means to map forest height at fine scales, resolving the vertical structure of groups of trees from spaceborne platforms in open canopy forests.

Paul M Montesano↗
NASA NTRS1985

Modeling the controls of forest productivity using canopy variables

A framework is presented by which a generalized, canopy-driven model of biogeochemical cycling in forest ecosystems may be produced. Recent research results demonstrating relationships between canopy characteristics and important ecosystem processes are used to support this approach. Most relationships hold across species groups and suggest that identification of species may not be crucial. Linking this type of model to remote sensing will depend on developing the capability to measure a few key morphological and chemical parameters of whole forest canopies by reflectance characteristics.

Aber, J. D.↗
DOE OSTI2025

Abiotic influences on continuous conifer forest structure across a subalpine watershed

Understanding the abiotic drivers of high-elevation forest physiognomy is essential for forecasting how mountain ecosystems will respond to emerging environmental pressures. Most prior studies of these relationships have relied on small samples of the full landscape, resulting in limited power to detect dominant covariates and their interactions. Here we report the first evaluation of abiotic influences on a complement of accurate, wall-to-wall estimates of conifer forest structure and composition at the watershed scale. In a subalpine conifer domain in the Colorado Rocky Mountains (USA), we developed a novel method for deriving stand structure metrics from waveform LiDAR data, which showed high fidelity with field inventory. We quantified the relationships between structural and compositional metrics and climate, topographic, edaphic, and geologic factors. Our results showed that peak snow water equivalent (SWE), snow disappearance rate, and elevation explained most of the variation in forest structure. The highest stand density, basal area, maximum canopy height, and quadratic mean diameter occurred in sites with SWE around one standard deviation below mean, but with long snow residence times. Stand density decreased linearly with elevation, while other metrics peaked between 3000 m and 3200 m. Substrate properties had weaker influence. Continuous mapping of through-canopy forest structure enabled our novel findings of the dominant role of snowpack in explaining structural and compositional variation, and of elevation thresholds. Our reproducible approach facilitates assessment of forest-topoclimate relationships in other conifer-dominated landscapes and improves understanding of the baseline patterns controlling forest structure, which is needed for predicting long-term ecological change.

forest ecology↗
NASA NTRS1984

Geologic mapping of Indonesian rain forest with analysis of multiple SIR-B incidence angles

The discrimination and mapping capabilities are to be evaluated for shuttle imaging radar-B (SIR-B) images of geologic features in Indonesia that are covered by equatorial rain forest canopy. The SIR-B backscatter from the rain forest at L-band is to be compared to backscatter acquired by the SEASAT scatterometer system at Ku-band ever corresponding areas. The approach for data acquisition, handling, and analysis and the expected results of the investigation are discussed.

Ford, J. P.↗
NASA NTRS1990

The effect of changing environmental conditions on microwave signatures of forest ecosystems - Preliminary results of the March 1988 Alaskan aircraft SAR experiment

In preparation for the ESA ERS-1 mission, a series of multitemporal, multifrequency, multipolarization aircraft SAR data sets were acquired near Fairbanks in March 1988. P-, L-, and C-band data were acquired with the NASA/JPL Airborne SAR on five different days over a period of two weeks. The airborne data were augmented with intensive ground calibration data as well as detailed simultaneous in situ measurements of the geometric, dielectric, and moisture properties of the snow and forest canopy. During the time period over which the SAR data were collected, the environmental conditions changed significantly; temperatures ranged from unseasonably warm (1 to 9 C) to well below freezing (-8 to -15 C), and the moisture content of the snow and trees changed from a liquid to a frozen state. The SAR data clearly indicate the radar return is sensitive to these changing environmental factors, and preliminary analysis of the L-band SAR data shows a 0.4 to 5.8 dB increase (depending on polarization and canopy type) in the radar cross section of the forest stands under the warm conditions relative to the cold. These SAR observations are consistent with predictions from a theoretical scattering model.

Way, Jobea↗
NASA NTRS1996

SIR-C/X-SAR: Imaging Radar Analyses for Forest Ecosystem Modeling

Progress, significant results and future plans are discussed relating to the following objectives: (1) Ecosystem characterization using SIR-C/X-SAR and AirSAR data; (2) Improving radar backscatter models for forest canopies; and (3) Using SAR measurements and models with forest ecosystem models to improve inferences of ecosystem attributes and processes.

Ranson, K. Jon↗
NASA NTRS2011

Recent Advances on INSAR Temporal Decorrelation: Theory and Observations Using UAVSAR

We review our recent advances in understanding the role of temporal decorrelation in SAR interferometry and polarimetric SAR interferometry. We developed a physical model of temporal decorrelation based on Gaussian-statistic motion that varies along the vertical direction in forest canopies. Temporal decorrelation depends on structural parameters such as forest height, is sensitive to polarization and affects coherence amplitude and phase. A model of temporal-volume decorrelation valid for arbitrary spatial baseline is discussed. We tested the inversion of this model to estimate forest height from model simulations supported by JPL/UAVSAR data and lidar LVIS data. We found a general good agreement between forest height estimated from radar data and forest height estimated from lidar data.

polarimetric SAR interferometry↗
NASA NTRS1973

Application of ERTS-1 data to analysis of agricultural crops and forests in Michigan

The results reported are based on analysis of ERTS Frame 1033-15580 collected over southwestern Lower Michigan on August 25, 1972. Major agricultural crops such as corn and soybeans were approaching maturity at this data and forest canopies were dense. Extensive ground truth information was gathered by detailed field study of test strips. This detailed information was supplemented over larger areas by interpretation of RB-57 and C-47 photography and MSS imagery. Recognition processing of ERTS-1 MSS data was carried out on a digital computer. Fields and forest stands were selected as training sets and test areas. Aerial imagery was essential for locating the positions of these selected areas on ERTS digital tapes. The recognition process was successful for each type of vegetation which had a dense green canopy such as forests, corn, and soybeans. Bare soil was also recognizable as a category.

Safir, G. R.↗
NASA NTRS1992

Comparison of modeled backscatter with SAR data at P-band

In recent years several analytical models were developed to predict microwave scattering by trees and forest canopies. These models contribute to the understanding of radar backscatter over forested regions to the extent that they capture the basic interactions between microwave radiation and tree canopies, understories, and ground layers as functions of incidence angle, wavelength, and polarization. The Santa Barbara microwave model backscatter model for woodland (i.e. with discontinuous tree canopies) combines a single-tree backscatter model and a gap probability model. Comparison of model predictions with synthetic aperture radar (SAR) data and L-band (lambda = 0.235 m) is promising, but much work is still needed to test the validity of model predictions at other wavelengths. The validity of the model predictions at P-band (lambda = 0.68 m) for woodland stands at our Mt. Shasta test site was tested.

Wang, Yong↗
NASA NTRS1989

Determining experimentally induced variation in coniferous canopy chemistry with Airborne Imaging Spectrometer data

Experimental treatments in a Douglas-fir forest in NE New Mexico were carried out to determine whether differences in forest canopy chemistry could be detected using data from the Airborne Imaging Spectrometer (AIS-2). Experimental treatments consisted of nitrogen fertilizer additions, sawdust additions, and control plots. After AIS-2 data were collected, the digital number of a given pixel was extracted from each channel, yielding 128 values that were used to form a spectrum. Four spectra were extracted from each treatment plot. Multiple stepwise linear regressions between first and second difference transformations of AIS-2 spectra and the canopy characteristics of biomass, nitrogen concentration, and nitrogen content were performed. The results showed a coefficient of multiple determination of 0.71 between first-difference AIS-2 spectra and measured nitrogen concentration in foliage, indicating that it may be possible to predict nitrogen concentration in Douglas fir using AIS-2 spectra.

Swanberg, N. A.↗
NASA NTRS1993

Evaluation of C-band SAR data from SAREX 1992: Tapajos study site

As part of the SAREX'92 (South American Radar Experiment), the Tapajos study site, located in Para State, Brazil was imaged by the Canada Center for Remote Sensing (CCRS) Convair 580 SAR system using a C-band frequency in HH and VV polarization and 3 different imaging modes (nadir, narrow, and wide swath). A preliminary analysis of this dataset is presented. The wide swath C-band HH polarized image was enlarged to 1:100,000 in a photographic form for manual interpretation. This was compared with a vegetation map produced primarily from Landsat Thematic Mapper (TM) data and with single-band and color composite images derived from a decomposition analysis of TM data. The Synthetic Aperture Radar (SAR) image shows well the topography and drainage network defining the different geomorphological units, and canopy texture differences which appear to be related to the size and maturity of the forest canopy. Areas of recent clearing of the primary forest can also be identified on the SAR image. The SAR system appears to be a source of information for monitoring tropical forest which is complementary to the Landsat Thematic Mapper.

Shimabukuro, Yosio Edemir↗
DOE OSTI2025

Degradation and deforestation increase the sensitivity of the Amazon Forest to climate extremes

About 40% of the Brazilian Amazon has been deforested or suffered changes in forest structure through degradation (selective logging, fires, and fragmentation). The impact of forest degradation on the forest’s sensitivity to climate extremes has not been fully explored because of a lack of data and the complex interplay of forest structure and climate drivers. Here, we combined forest structure data from 545 airborne lidar transects (375 ha each) across the Brazilian Amazon with the Ecosystem Demography Model (ED2). We explore the forest’s functional response to near-present (1981–2019) climate extremes under observed forest structure from lidar ( Control ) and two forest structure change scenarios: (1) forest recovery by excluding all future deforestation and degradation ( Recovery ) and (2) expansion of selective logging and deforestation ( Degradation ). Using the Control simulation, we found a close and positive association between local forest aboveground biomass and the predicted gross primary productivity (GPP) and evapotranspiration (ET). Moreover, both GPP and ET respond negatively to extremes in vapor pressure deficit and downwelling shortwave irradiance in degraded forests in Eastern and Southern Amazon, indicating high sensitivity to droughts. Locally high-biomass forest patches showed little or no negative response of GPP and ET to extreme drought conditions whereas low-biomass forest patches in the same locations—typically degraded forest canopies—responded negatively to higher moisture stress. The results from the Recovery scenario showed similar results to simulations with observed structure; however, under the Degradation scenario, low-biomass forest patches became more abundant, resulting in more regions where GPP and ET are negatively impacted by hot drought conditions according to the ED2 model. Our results suggest that local forest structure is a critical determinant of an ecosystem’s response to climate variability, and that the loss of canopy trees in the Amazon through forest degradation could increase and expand forest vulnerability to droughts.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2014

Features of Point Clouds Synthesized from Multi-View ALOS/PRISM Data and Comparisons with LiDAR Data in Forested Areas

LiDAR waveform data from airborne LiDAR scanners (ALS) e.g. the Land Vegetation and Ice Sensor (LVIS) havebeen successfully used for estimation of forest height and biomass at local scales and have become the preferredremote sensing dataset. However, regional and global applications are limited by the cost of the airborne LiDARdata acquisition and there are no available spaceborne LiDAR systems. Some researchers have demonstrated thepotential for mapping forest height using aerial or spaceborne stereo imagery with very high spatial resolutions.For stereo imageswith global coverage but coarse resolution newanalysis methods need to be used. Unlike mostresearch based on digital surface models, this study concentrated on analyzing the features of point cloud datagenerated from stereo imagery. The synthesizing of point cloud data from multi-view stereo imagery increasedthe point density of the data. The point cloud data over forested areas were analyzed and compared to small footprintLiDAR data and large-footprint LiDAR waveform data. The results showed that the synthesized point clouddata from ALOSPRISM triplets produce vertical distributions similar to LiDAR data and detected the verticalstructure of sparse and non-closed forests at 30mresolution. For dense forest canopies, the canopy could be capturedbut the ground surface could not be seen, so surface elevations from other sourceswould be needed to calculatethe height of the canopy. A canopy height map with 30 m pixels was produced by subtracting nationalelevation dataset (NED) fromthe averaged elevation of synthesized point clouds,which exhibited spatial featuresof roads, forest edges and patches. The linear regression showed that the canopy height map had a good correlationwith RH50 of LVIS data with a slope of 1.04 and R2 of 0.74 indicating that the canopy height derived fromPRISM triplets can be used to estimate forest biomass at 30 m resolution.

LiDARD↗
NASA NTRS2004

Mapping and Monitoring Delmarva Fox Squirrel Habitat Using an Airborne LiDAR Profiler

Twenty five hundred thirty nine kilometers of airborne laser profiling and videography data were acquired over the state of Delaware during the summer of 2000. The laser ranging measurements and video from approximately one-half of that data set (1304 km) were analyzed to identify and locate forested sites that might potentially support populations of Delmarva fox squirrel (DFS, Sciurus niger cinereus). The DFS is an endangered species previously endemic to tall, dense, mature forests with open understories on the Eastern Shore of the Chesapeake Bay. The airborne LiDAR employed in this study can measure forest canopy height and canopy closure, but cannot measure or infer understory canopy conditions. Hence the LiDAR must be viewed as a tool to map potential, not actual, habitat. Fifty-three potentially suitable DFS sites were identified in the 1304 km of flight transect data. Each of the 53 sites met the following criteria according to the LiDAR and video record: (1 ) at least 120m of contiguous forest; (2) an average canopy height greater than 20m; (3) an average canopy closure of >80%; and (4) no roofs, impervious surface (e.g., asphalt, concrete), and/or open water anywhere along the 120m length of the laser segment. Thirty-two of the 53 sites were visited on the ground and measurements taken for a DFS habitat suitability model. Seventy eight percent of the sites (25 of 32) were judged by the model to be suited to supporting a DFS population. Twenty-eight of the 32 sites visited in the field were in forest cover types (hardwood, mixed wood, conifer, wetlands) according to a land cover GIS map. Of these, 23 (82%) were suited to support DFS. The remaining 4 sites were located in nonforest cover types - agricultural or residential areas. Two of the four, or 50% were suited to the DFS. All of the LiDAR flight data, 2539 km, were analyzed to

Nelson, Ross↗