Fabrication of Thick Gold Strip Lines
Ion-beam etching and masking techniques fabricate micron-sized gold strip lines. Fabricated by use of argon ion-beam milling.
Gee, C. M.↗
SEARCH · Search NASA
Results for “GEE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Reversing Optical Damage In LiNbO3 Switches
One symptom of optical damage in Ti-diffused LiNbO3 directional-coupler switch reversed by temporarily raising input illumination to higher-thannormal power level. Healing phenomenon used to restore normal operation, increase operating-power rating, and stabilize operating characteristics at lower powers. Higher operating power is tolerated after treatment.
Gee, C. M.↗
Genetics of resistance to the African trypanosomes. V Qualitative and quantitative differences in interferon production among susceptible and resistant mouse strains
Explore the source record for details and available documents.
De Gee, A. L. W.↗
An overview of the DOE terrestrial crystalline solar cell research program
There has been significant progress in the crystalline solar cell area in the past two years that has rejuvenated interest in the high efficiency devices for terrestrial photovoltaic systems. The most significant developments have been in the crystalline solar cell area, but progress in the III-V area has also been recorded. A review of terrestrial crystalline cell research is presented along with a description of future research directions.
Gee, James M.↗
A comparison of the radiation tolerance characteristics of multijunction solar cells with series and voltage-matched configurations
The effect of series and voltage-matched configurations on the performance of multijunction solar cells in a radiation environment was investigated. It was found that the configuration of the multijunction solar cell can have a significant impact on its radiation tolerence characteristics.
Gee, J. M.↗
How good is the impedance boundary condition?
The impedance boundary condition (IBC) is often used in scattering problems involving material-coated conducting bodies. It is shown that for some commonly encountered coating configurations, the value of the impedance varies significantly as functions of the incident angle and polarization. Hence, the use of IBC in a rigorously formulated problem may affect the accuracy of the final solution.
Lee, Shung-Wu↗
Compressibility effects on flow friction in a fully developed pipe flow
A method was evolved to account for the effects of compressibility in flows through long circular pipes of uniform diameter. Velocity and density variations across the flow cross section were approximated by profile shapes recommended for a flow past flat plates. The wall of the pipe was assumed to have attained an adiabatic condition. An integral method was used to obtain solutions for the governing equations of flow. The method was then used to analyze the detailed pressure measurements made in a long pipe for flow of air at different flow rate settings. Flow friction values derived from these pressure measurements were compared with the standard incompressible pipe flow data available in existing literature.
Murthy, Sreedhara V.↗
The effect of different module configurations on the radiation tolerance of multijunction solar cells
The effect of different module configurations on the performance of multijunction (MJ) solar cells in a radiation environment was investigated. Module configuration refers to the electrical circuit in which the subcells of the multijunction cell are wired. Experimental data for AlCaAs, GaAs, InGaAs, and silicon single-junction concentrator cells subjected to 1 MeV electron irradiation was used to calculate the expected performance of AlGaAs/InGaAs, AlGa/silicon, GaAs/InGaAs, and GaAs/silicon Mj concentrator cells. These calculations included independent, series, and voltage-matched configurations. The module configuration was found to have a significant impact on the radiation tolerance characteristic of the MJ cells.
Gee, James M.↗
Modeling and simulation of a Stewart platform type parallel structure robot
The kinematics and dynamics of a Stewart Platform type parallel structure robot (NASA's Dynamic Docking Test System) were modeled using the method of kinematic influence coefficients (KIC) and isomorphic transformations of system dependence from one set of generalized coordinates to another. By specifying the end-effector (platform) time trajectory, the required generalized input forces which would theoretically yield the desired motion were determined. It was found that the relationship between the platform motion and the actuators motion was nonlinear. In addition, the contribution to the total generalized forces, required at the actuators, from the acceleration related terms were found to be more significant than the velocity related terms. Hence, the curve representing the total required actuator force generally resembled the curve for the acceleration related force. Another observation revealed that the acceleration related effective inertia matrix I sub dd had the tendency to decouple, with the elements on the main diagonal of I sub dd being larger than the off-diagonal elements, while the velocity related inertia power array P sub ddd did not show such tendency. This tendency results in the acceleration related force curve of a given actuator resembling the acceleration profile of that particular actuator. Furthermore, it was indicated that the effective inertia matrix for the legs is more decoupled than that for the platform. These observations provide essential information for further research to develop an effective control strategy for real-time control of the Dynamic Docking Test System.
Lim, Gee Kwang↗
A comparison of the radiation tolerance characteristics of multijunction solar cells with series and voltage-matched configurations
The effect of series and voltage-matched configurations on the performance of multijunction solar cells in a radiation environment was investigated. It was found that the configuration of the multijunction solar cell can have a significant impact on its radiation tolerance characteristics.
Gee, James M.↗
Numerical simulation of the viscous flow around a simplified F/A-18 at high angles of attack
A numerical method developed for solving the viscous flow around three-dimensional complex configurations is presently used to simulate the flow around a simplified F/A-18 configuration encompassing forebody, wing, leading-edge extension, faired-over inlet, and deflected wing leading-edge flaps, at Mach 0.243 and 30.3 deg angle of attack. The computational results show the details of the flowfield structure, including primary, secondary, and tertiary separation lines, the development of forebody and leading-edge extension vortex, and the burst of this vortex. A grid-refinement study is conducted to assess the effect of grid characteristics on solution accuracy. Substantial agreement is obtained between these results and flight data.
Rizk, Yehia M.↗
The effect of turbulence models on the numerical prediction of the flowfield about a prolate spheroid at high angle of attack
The F3D thin-layer Navier-Stokes code presently used to numerically investigate the three-dimensional separated flow about a prolate spheroid at high incidence analyzes the effect of different turbulence models on the flowfield solution and the characteristics of the predicted flow. The Johnson-King (1984) model is applied in order to evaluate the importance of modeling nonequilibrium effects in predicting flow about a slender body at high incidence; the computations in question are for steady-state, fully turbulent flow. Insight is gained into the effects of turbulence models on flow characteristics, and model effects on the accurate prediction of highly separated and vortical flows about a slender body are demonstrated.
Gee, Ken↗
Accounting For Compressibility In Viscous Flow In Pipes
Method developed to account for effects of compressibility in viscous flows through long, circular pipes of uniform diameter. Based on approximation of variations in density and velocity across pipe cross section by profile equations developed for boundary-layer flow between flat plates.
Steinle, Frank W.↗
Tandem concentrator solar cells with 30 percent (AMO) power conversion efficiency
Very high efficiency concentrator solar panels are envisioned as economical and reliable electrical power subsystems for space based platforms of the future. GaAs concentrator cells with very high efficiencies and good sub-bandgap transmissions can be fabricated on standard wafers. GaSb booster cell development is progressing very well; performance characteristics are still improving dramatically. Consistent GaAs/GaSb stacked cell AMO efficiencies greater than 30 percent are expected.
Avery, J. E.↗
Numerical prediction of the unsteady flowfield around the F-18 aircraft at large incidence
This paper describes a numerical method capable of solving the steady and unsteady viscous flow around complete aircraft configurations at high angles of attack. This method is used to simulate the external flow around the F-18 aircraft, including deflected control surfaces. The current technique employs a generalized overset zonal grid scheme to decompose the computational space around the aircraft. The grid around various components of the aircraft are created numerically using a three-dimensional hyperbolic grid generation procedure. The Reynolds-averaged Navier-Stokes equations are integrated using a time-accurate, implicit procedure. Results for the turbulent flow around the F-18 aircraft at 30 degrees angle of attack show the details of the flowfield structure, including the unsteadiness created by the vortex burst and the resulting fluctuating airloads exerted on the vertical tail. The computed results agree fairly well with flight data for surface pressure, surface flow pattern, vortex burst location, and the dominant frequency for tail load fluctuations.
Rizk, Yehia M.↗
Computational optimization of a pneumatic forebody flow control concept
The effectiveness of a tangential slot blowing concept for generating lateral control forces on an aircraft forebody is analyzed using computational fluid dynamics. The flow about a fighter forebody is computed using a multiple-zone, thin-layer Navier-Stokes code. Tangential slot blowing is modeled by the use of an actuator plane. The effects of slot location and slot length on the efficiency of the system are analyzed. Results of the study indicate that placement of the slot near the nose of the aircraft greatly enhances the efficiency of the system, while the length and circumferential location of the slot are of secondary importance. Efficiency is defined by the amount of side force or yawing moment obtained per unit blowing coefficient. The effect of sideslip on the system is also analyzed. The system is able to generate incremental changes in forces and moments in flows with sideslip angles up to 10 deg comparable to those obtained at zero sideslip. These results are used to determine a baseline configuration for an experimental study of the tangential slot blowing concept.
Gee, Ken↗
Turbulence model effects on separated flow about a prolate spheroid
Explore the source record for details and available documents.
Gee, Ken↗
Numerical investigation of tail buffet on F-18 aircraft
Numerical investigation of vortex induced tail buffet is conducted on the F-18 aircraft at high angles of attack. The Reynolds-averaged Navier-Stokes equations are integrated using a time-accurate, implicit procedure. A generalized overset zonal grid scheme is used to decompose the computational space around the complete aircraft with faired-over inlet. A weak coupling between the aerodynamics and structures is assumed to compute the structural oscillation of the flexible vertical tail. Time-accurate computations of the turbulent flow around the F-18 aircraft at 30 degrees angle of attack show the surface and off-surface flowfield details, including the unsteadiness created by the vortex burst and its interaction with the vertical twin tail which causes the tail buffet. The effect of installing a LEX fence on modifying the vortex structure upstream of the tail is also examined.
Rizk, Yehia M.↗