Search NASA⌕ Search

SEARCH · Search NASA

Results for “GTO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Hubble Space Telescope: Faint object spectrograph instrument handbook. Version 1.1

The Faint Object Spectrograph (FOS) has undergone substantial rework since the 1985 FOS Instrument Handbook was published, and we are now more knowledgeable regarding the spacecraft and instrument operations requirements and constraints. The formal system for observation specification has also evolved considerably, as the GTO programs were defined in detail. This supplement to the FOS Instrument Handbook addresses the important aspects of these changes, to facilitate proper selection and specification of FOS observing programs. Since the Handbook was published, the FOS red detector has been replaced twice, first with the best available spare in 1985 (which proved to have a poor, and steadily degrading red response), and later with a newly developed Digicon, which exhibits a high, stable efficiency and a dark-count rate less than half that of its predecessors. Also, the FOS optical train was realigned in 1987-88 to eliminate considerable beam-vignetting losses, and the collimators were both removed and recoated for greater reflectivity. Following the optics and detector rework, the FOS was carefully recalibrated (although only ambient measurements were possible, so the far-UV characteristics could not be re-evaluated directly). The resulting efficiency curves, including improved estimates of the telescope throughput, are shown. A number of changes in the observing-mode specifications and addition of several optional parameters resulted as the Proposal Instructions were honed during the last year. Target-brightness limitations, which have only recently been formulated carefully, are described. Although these restrictions are very conservative, it is imperative that the detector safety be guarded closely, especially during the initial stages of flight operations. Restrictions on the use of the internal calibration lamps and aperture-illumination sources (TA LEDs), also resulting from detector safety considerations, are outlined. Finally, many changes have been made to the instructions for target acquisition specification.

Ford, Holland C.↗

High Speed Solid State Circuit Breaker

The U.S. Army Research Laboratory, Fort Monmouth, NJ, has developed and is installing two 3.3 MW high speed solid state circuit breakers at the Army's Pulse Power Center. These circuit breakers will interrupt 4160V three phase power mains in no more than 300 microseconds, two orders of magnitude faster than conventional mechanical contact type circuit breakers. These circuit breakers utilize Gate Turnoff Thyristors (GTO's) and are currently utility type devices using air cooling in an air conditioned enclosure. Future refinements include liquid cooling, either water or two phase organic coolant, and more advanced semiconductors. Each of these refinements promises a more compact, more reliable unit.

Podlesak, Thomas F.↗

Strv1-b Flight Experiment

The Space Technology Research Vehicle (STRV-1b) is discussed. The STRV-1b is a small (100 watt) satellite flown by the British Defense Research Agency (DRA). The mission goal is to fly new and emerging space technologies at a more reasonable cost in a short-term timeframe. The STRV-1b's orbit can be described as a geosynchronous transfer orbit (GTO) with a perigee of 200 km, an apogee of 36,000 km (geosynchronous earth orbit (GEO)), and a period of 10.5 hours. The Phillips Laboratory plans to use the STRV-1b to test up to 20 advanced experimental photovoltaic cells. The discussion is presented in vugraph form.

Source record↗

UV spectroscopy of low-redshift active galaxies

Ultraviolet spectra of bright Seyfert 1 galaxies will be obtained with the Hubble Space Telescope. Observations will be used to pursue the following goals: (1) Broad and narrow components of the strong emission lines will be deconvolved. (2) Broad-line profiles will be extracted for comparison with kinematic models; line ratios will be determined. (3) Many weak UV and emission lines from optical spectra will be compared for reddening along line of sight and chemical composition. (4) Absorption lines from Galactic halo, intergalactic medium and Seyfert galaxy will be used to establish physical conditions/chemical composition of the gas. (5) Strong emission Fe II in the UV will be used to determine FE II/L-alpha ratios for comparison with photoionization models. Other tasks relating to GTO 1170 program will be performed. It appears that NLR clouds in NGC 5548 experience much higher level of ionizing flux than those Seyfert 2 galaxies. Future observations will determine if this result extends to other Seyfert 1 galaxies.

Wu, C.-C.↗

Guaranteed time observations support for Faint Object Spectrograph (FOS) on HST

The goals of the GTO effort are for investigations defined in previous years by the IDT to be carried out as HST observations and for the results to be communicated to the scientific community and to the public. The search for possible black holes in the nuclei of both normal and active nucleus galaxies has had to be delayed to the post-servicing era. FOS spectropolarimetric observations of the nuclear region of the peculiar Seyfert galaxy Mrk 231 reveal that the continuum polarization peaks at 18% in the near UV and then declines rapidly toward shorter wavelengths. The papers on the absorption line analysis for our galactic halo address the spatial distribution of high and intermediate level ions in the halo and illustrate the patchy and heterogeneous nature of the halo. The papers on the scattering characteristics of the HST/FOS have provided us with data that shows that the HST mirror surfaces are quite smooth, even at the UV wavelengths. WF-PC and FOC images of the halo PN K648 have been fully analyzed.

Harms, Richard↗

Strutjet-powered reusable launch vehicles

Martin Marietta and Aerojet are co-investigating the feasibility and viability of reusable launch vehicle designs. We are assessing two vehicle concepts, each delivering 8000 lb to a geosynchronous transfer orbit (GTO). Both accomplish this task as a two-state system. The major difference between the two concepts is staging. The first concept, the two-stage-to-orbit (TSTO) system, stages at about 16 kft/sec, allowing immediate return of the first stage to the launch site using its airbreathing propulsion system for a powered cruise flight. The second concept, the single-stage-to-orit (SSTO) system, accomplishes stage separation in a stable low earth orbit (LEO).

Siebenhaar, A.↗

Micrometeoroids and debris on LDEF comparison with MIR data

Part of the LDEF tray allocated to French experiments (FRECOPA) has been devoted to the study of dust particles. The tray was located on the face of LDEF directly opposed to the velocity vector. Crater size distributions have made possible the evaluation of the incident microparticle flux in the near-Earth environment. Comparisons are made with measurements obtained on the other faces of LDEF (tray clamps), on the leading edge (MAP) and with results of a similar experiment flown on the MIR space station. The geometry of impact craters, depth in particular, provides useful information on the nature of impacting particles and the correlation of geometry with the chemical analysis of projectile remnants inside craters make possible a discrimination between meteoroids and orbital debris. Emphasis has been laid on the size distribution of small craters in order to assess a cut-off in the distribution of particles in LEO. Special attention has been paid to the phenomenon of secondary impacts. A comparison of flight data with current models of meteoroids and space debris shows a fair agreement for LDEF, except for the smaller particles: the possible contribution of orbital debris in GTO orbits to the LDEF trailing edge flux is discussed. For MIR, flight results show differences with current modeling: the possible enhancement of orbital debris could be due to the contaminating presence of a permanently manned space station.

Mandeville, Jean-Claude↗

ORION: A Supersynchronous Transfer Orbit mission

ORION F1 was launched on 29th November 1994 on an Atlas IIA launch vehicle. It was designed, built and delivered in-orbit by Matra Marconi Space Systems Plc and was handed over to ORION Satellite Corporation on 20th January 1995 at its on-station longitude of 37.5 deg W. The mission differed significantly from that of any other geostationary communications satellite in that the Transfer Orbit apogee altitude of 123,507 km was over three times geosynchronous (GEO) altitude and one third of the way to the moon. The SuperSynchronous Transfer Orbit (SSTO) mission is significantly different from the standard Geostationary Transfer Orbit (GTO)mission in a number of ways. This paper discusses the essential features of the mission design through its evolution since 1987 and the details of the highly successful mission itself including a detailed account of the attitude determination achieved using the Galileo Earth and Sun Sensor (ESS).

Walters, I. M.↗

VentureStar(trademark) Reaping the Benefits of the X-33 Program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar(trademark), the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar(trademark) are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21 st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream.

Sumrall, J.↗

Finite-field Calculations of Molecular Polarizabilities Using Field-Induced Polarization Functions: Second- and Third-order Perturbation Correlation Corrections to the Coupled Hartree-Fock Polarizability of H2O

Ordinary Rayleigh-Schroudinger perturbation theory with Moller-Plesset (RSMP) partitioning is used to calculate second- and third-order correlation corrections to the CHF polarizability and dipole moment of the water molecule by a finite-field procedure. Pade approximants are found to be useful in accelerating the convergence of the property perturbation expansions. Field-induced polarization functions suitable for polarizability calculations are determined. The average polarizability calculated, neglecting vibrational averaging, with Dunning's (9s5p/4s-4s2p/2s) contracted GTO basis set augmented by field-induced lslp2d/lp polarization functions is within 3 per cent of the experimental result. Correlation corrections to the dipole moment and polarizability of the water molecule calculated by the finite-field RSMP and single + double excitation CI(SDCI) methods for the same basis set are found to be in close agreement. The RSMP approach has the advantages of being size-consistent and of being capable of greater efficiency than the SCDI method. Comparative calculations carried out using Epstein-Nesbet partitioning show that through third order RSEN correlation perturbation expansions for the dipole moment and polarizability are less rapidly convergent than RSMP expansions. However, reasonable accord with RSMP results can be achieved by using Pade approximants to accelerate the convergence of RSEN energy perturbation expansions. The convergence of RSMP property correlation expansions based on the zeroth-order uncoupled-Hartree-Fock (UCHF) and coupled-Hartree-Fock (CHF) approximations are compared through third order. Whereas the CHF + RSMP expansions are for practical purposes fully converged, the UCHF + RSMP expansions are not adequately converged.

Langhoff, S. R.↗

Chandra Serendipitous and Cycle 1 Targeted Surveys

A team led by scientists at the Chandra X-ray Center (CXC, formally known as the AXAF Science Center) is developing plans for a Serendipitous Survey using a selected subset of Chandra observations starting with Cycle 1. This survey will include two parts: (1) for sources sufficiently bright to be identified in available sky surveys (V approximately < 21), probable optical identifications and related imaging data will be, provided with the X-ray data as part of the Chandra data products. (2) at fainter flux X-ray source identifications will be determined from publically available, archival data and new optical imaging observations. We estimate that this survey will yield approximately 2500 source identifications in Cycle 1 down to X-ray flux levels approximately 10(exp -15) erg/sq cm.s and covering an area of sky approximately 10 sq degs. Optical spectroscopy and radio imaging will also be obtained for a subset of these sources. We are exploring appropriate ways to involve interested Chandra observers as well as other scientists in this survey project. A general overview of the various surveys which comprise a portion of the Chandra Cycle 1 GTO and GO programs and are not covered elsewhere in these proceedings will also be presented.

Wilkes, Belinda↗

X-Ray Surveys with Chandra

The potential of unbiased high galactic latitude surveys in X-rays with Chandra will be laid out. The specifics of the surveys approved for AO1 (GO+GTO) will be used to predict source numbers and accuracy in the very soft, 'ROSAT', and hard X-ray bands. If Chandra flight data is available by the time of the meeting examples will be shown and actual performance compared with predictions.

Elvis, Martin↗

System Engineering Issues for Avionics Survival in the Space Environment

This paper examines how the system engineering process influences the design of a spacecraft's avionics by considering the space environment. Avionics are susceptible to the thermal, radiation, plasma, and meteoroids/orbital debris environments. The environment definitions for various spacecraft mission orbits (LEO/low inclination, LEO/Polar, MEO, HEO, GTO, GEO and High ApogeeElliptical) are discussed. NASA models and commercial software used for environment analysis are reviewed. Applicability of technical references, such as NASA TM-4527 "Natural Orbital Environment Guidelines for Use in Aerospace Vehicle Development" is discussed. System engineering references, such as the MSFC System Engineering Handbook, are reviewed to determine how the environments are accounted for in the system engineering process. Tools and databases to assist the system engineer and avionics designer in addressing space environment effects on avionics are described and usefulness assessed.

Pavelitz, Steven↗

Chandra Observations of the Young Cluster NGC 2516

The Chandra observatory was Launched July 23 1999. The first two months of the mission have been spent performing on-orbit calibration. This phase of the mission has included about 60 Ks of observing time on the young cluster NGC 2516. The observations have been made as part of the measurements of the boresight and the plate-scale of the various instruments. These observations will augment planned (deeper) GTO observation of this cluster. Here we present the results of these early observations. As of September 7, in a single ACIS 5'x5' field (one backside chip) examined 26 sources were detected in a single 10 Ks exposure. This represents less than one sixth of the total exposure time and less than one sixth of the total area to be observed during the calibration phase. we will compare the characteristics of those sources detected with Chandra with those detected by ROSAT. Since these observations are being made using all detectors, we will also compare observations among the various detectors.

Wolk, Scott J.↗

High Energy Continuum of High Redshift Quasars

Discussion with the RXTE team at GSFC showed that a sufficiently accurate background subtraction procedure had now, been derived for sources at the flux level of PKS 2126-158. However this solution does not apply to observations carried out before April 1997, including our observation. The prospect of an improved solution becoming available soon is slim. As a result the RXTE team agreed to re-observe PKS2126-158. The new observation was carried out in April 1999. Quasi-simultaneous optical observations were obtained, as Service observing., at the 4-meter Anglo-Australian Telescope, and ftp-ed from the AAT on 22April. The RXTE data was processed in late June, arriving at SAO in early July. Coincidentally, our collaborative Beppo-SAX observation of PKS2126-158 was made later in 1999, and a GTO Chandra observation (with which we are involved) was made on November 16. Since this gives us a unique monitoring data for a high redshift quasar over a broad pass-band we are now combining all three observations into a single comprehensive study Final publication of the RXTE data will thus take place under another grant.

Elvis, Martin↗

The Mars Micromission Spacecraft

The concept of a small common Mars Micromission spacecraft design, using the Ariane-5 GTO piggyback launch opportunities has been studied over the past year by NASA/JPL and CNES. The study is based on the 200 kg ASAP twin configuration, due to its clear performance and cost advantages for planetary missions over the 100-kg ASAP configuration. The spacecraft design commonalty has been explored for the Mars 2003, 2005, and 2007 launch opportunities and for three main mission types: Probe Carrier missions, with one or more probes, measuring 40-80 cm in diameter. Science Orbiter missions, with additional fuel for orbit insertion. and Telecommunication Relay Orbiter missions, with optimal data return link.

Leschly, Kim↗

Resolving the Wind Structure of Eta Carinae

Space Telescope Imaging Spectrograph (STIS) spectral observations of Eta Carinae have resolved the wind structure of the star(s) from the central point source. These observations were done with a 52 x 0.1" aperture, resolving power of about 5000 and complete spectral coverage from 1640A to 10400A. Various broad stellar Lines are seen to change within the central 0.511 of the nebular region. The Balmer lines, relative to the continuum, drop in strength while some Fe II lines scale with the continuum. Other Fe II lines increase in intensity while still others decrease. The structure to the southeast of the central source shows considerable variation in the stellar line strengths. To the Northwest, the emission is dominated by the very bright nebular knots, Weigelt blobs B and D. Three sets of observations have been done: March 1998, February 1999 and March 2000 to monitor the spectral variations. The stellar, wind and nebular emission changes considerably during this two year period. This work was done under the STIS GTO and HST GO funding.

Gull, T.↗

[Sr II] Detected in a Nebular Filament Near Eta Carinae

Observations with the Space Telescope Imaging Spectrograph on the Hubble Space Telescope reveal a peculiar emission line region in the close vicinity to Eta Carinae. The lines of [SrII], [MnII], [CoII], [TiII], [NiII] and [FeI] are detected in the 6400-7000 Angstrom spectral interval at a blue-shifted velocity of approximately 95 km/sec and seem to be associated with a long, narrow filament with dimensions of less than 0.5 inches by 1.1 inches. The filament is notable as it is separate both in velocity and structure from the bright emission of the Integral Nebula. This filament is buried within the Homunculus and is not visible in direct images which are dominated by reflection nebulosities. In our literature searches we have found no evidence of strontium emission lines in nebulae. We are aware of permitted transitions of strontium seen in AGB stars. S-processed elements like strontium are not expected in the ejecta of a massive star like Eta Carinae. Detection of [SrII] and the fact that the [NiII], [MnII] and [CoII] lines are unusually strong compared to [FeI] are quite a surprise. It has long been known that nitrogen is overabundant in the ejecta of Eta Carinae. Is this processed material from the present star(s)? Has there been processed material ejected from a more evolved companion? The situation is decidedly mysterious. This research has been supported by NASA through STScI grants and the STIS GTO funding.

Gull, T.R.↗