Impulsive emission of approximately 40 KeV electrons from the sun
Impulsive emission of high energy electrons from sun and diffusive propagation through interplanetary medium observed by Mariner IV PARTICLE detectors
ELECTRON EMISSION↗
SEARCH · Search NASA
Results for “HIGH ENERGY ELECTRON”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High energy primary electron spectrum observed by the emulsion chamber
A detector of the emulsion chamber type is used to measure the energy spectrum of cosmic-ray electrons. Two large emulsion chambers, each having an area of 40 by 50 sq cm, are exposed for about 25.5 hr at an average pressure altitude of 3.9 mbar. About 500 high-energy cascades (no less than about 600 GeV) are detected by searching for dark spots on the X-ray films. A power-law energy dependence formula is derived for the spectrum of primary cosmic-ray electrons in the energy region over 100 GeV. The results are in good agreement with the transition curves obtained previously by theoretical and Monte Carlo calculations.
Nishimura, J.↗
Exploring high-intensity laser-driven secondary sources via high-order spectral pulse shaping for high-energy-density experiments
We present here the results of an investigation that aims to explore the impact of spectral pulse shaping on the generation of high-energy electrons (>1 MeV) and x rays (∼5–9 keV) using a high-intensity (I∼10 21 W/cm 2 ) laser system. The study involved a systematic scan of a broad parameter space in group delay dispersion and third-order dispersion, with variations up to 4 × 10 3 fs −2 and 6 × 10 4 fs −3 , respectively, to identify optimal conditions for enhancing secondary source yields. Several spectral phase conditions were found to significantly enhance the generation of hot electrons and x rays by amounts reaching up to 50% relative to the transform-limited pulse. The experiment, conducted at the Scarlet laser facility (800 nm, 5 J, 30 fs) at the Ohio State University, highlights the potential of spectral pulse shaping as a powerful tool for tuning secondary laser-driven sources. These findings are particularly relevant for advancing brighter x-ray and electron probes for high-energy-density science.
Physics - Plasma physics↗
Spitzer Space Telescope Spectroscopy of the Kepler Supernova Remnant
The Infrared Spectrograph on the Spitzer Space Telescope was used for observations of the Kepler supernova remnant, with all four instrument modules targeted on the bright infrared knot located at 17h30m35.80s,-21d28m54.0s (J2000). The low spectral resolution modules data show a dust continuum spectrum consistent with dust grains heated by high-energy electrons, while the high resolution modules data show atomic emission line ratios consistent with excitation by a high velocity shock of greater than 100 kilometers per second and electron densities of approximately 1,000 per centimeter. The abundance ratios for the six detected elements show signs of heavy-element enhancement. This work is based on observations made with the Spitzer Space Telescope, which is operated by the Jet Propulsion Laboratory, California Institute of Technology. Support for this work was provided by NASA's Office of Space Science.
Roellig, T. L.↗
An Overview of Energetic Particle Precipitation Effects on the Earth's Atmosphere and (Potentially) Climate
Energetic precipitating particles (EPPs) can cause significant constituent changes in the polar mesosphere and stratosphere (middle atmosphere) during certain periods. Both protons and electrons can influence the polar middle atmosphere through ionization and dissociation processes. EPPs can enhance HOx (H, OH, HO2) through the formation of positive ions followed by complex ion chemistry and NOx (N, NO, NO2) through the dissociation of molecular nitrogen. The solar EPP-created HOx increases can lead to ozone destruction in the mesosphere and upper stratosphere via several catalytic loss cycles. Such middle atmospheric HOx-caused ozone loss is rather short-lived due to the relatively short lifetime (hours) of the HOx constituents. The HOx-caused ozone depletion of greater than 30% has been observed during several large solar proton events (SPEs) in the past 50 years. HOx enhancements due to SPEs were confirmed by observations in solar cycle 23. A number of modeling studies have been undertaken over this time period that show predictions of enhanced HOx accompanied by decreased ozone due to energetic particles. The solar EPP-created NOx family has a longer lifetime than the HOx family and can also lead to catalytic ozone destruction. EPP-caused enhancements of the NOx family can affect ozone promptly, if produced in the stratosphere, or subsequently, if produced in the lower thermosphere or mesosphere and transported to the stratosphere. NOx enhancements due to auroral electrons, medium and high energy electrons, relativistic electron precipitation (REP) events, and SPEs have been measured and/or modeled for decades. Model predictions and measurements show that certain years have significant winter-time meteorological events, which result in the transport of EPP-caused NOx enhancements in the upper mesosphere and lower thermosphere to lower altitudes. The NOx-caused ozone depletion has also been observed during several solar proton events (SPEs) in the past 50 years. Model predictions indicate that the longer-lived SPE-caused polar stratospheric and mesospheric ozone decrease can be >10% for up to five months past the largest events and is statistically significant; however, total ozone measurements do not indicate any long-term SPE impact.
Jackman, Charles H.↗
Sensitivity of synchrotron radiation to the superthermal electron population in mildly relativistic plasma
Synchrotron radiation has markedly different behavior in ~10 keV and in ~100 keV plasma. We show that high-energy electrons that occupy the tail of velocity distribution function have disproportionate impact on power loss of ~100 keV plasma. If electrons with energy more than cutoff energy are redistributed while keeping the Maxwellian distribution function below cutoff energy intact, both emission and absorption of synchrotron radiation act to decrease the lost power. Furthermore, these novel radiation transport effects in non-equilibrium plasma suggest large utility in the deconfinement of high-energy electrons to reduce synchrotron radiation in applications where the radiation is deleterious.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Microscopic and Metallurgical Aspects of the Space Shuttle Columbia Accident Investigation and Reconstruction
The Space Shuttle Columbia was descending for a landing at the Kennedy Space Center (KSC) on February 1, 2003. Approximately 20 minutes prior to touchdown, the Columbia began disintegrating over the western United States; the majority of debris eventually impacted in eastern Texas and western Louisiana. A monumental effort eventually recovered approximately 84,000 pieces of debris, approximately 38% of the Orbiter's original dry weight. The debris was transported to KSC, where the items were catalogued and evaluated. Critical areas of interest, such as the left and right leading edge surfaces and the underside of the ship, were placed upon a grid to aid in the reconstruction. Items of interest included metallic structures, reinforced carbon-carbon composites, and ceramic heat insulation tiles. Many of the leading edge elements had re-solidified metallic deposits spattered on them. These deposits became known as slag and were one of the main focuses of the investigation. In order to help determine the sequence of events inside the left wing during the accident, the slag's composition, layering order, and directionality of deposition were studied. A myriad of analytical tests were performed in an attempt to ascertain the compositional and depositional characteristics of selected slag deposits, including the ordering of deposited layers within each individual slag deposit harvested. Initially, Scanning Electron Microscopy and Energy Dispersive X-Ray Spectroscopy (SEM/EDX) were performed to quickly characterize the overall composition of individual slag deposits: SEM utilizes a narrowlyfocused high-energy electron beam impinging upon a specimen. The incident beam excites and liberates lower energy secondary electrons, which are detected and analyzed, providing a visual representation of the sample's surface topography. EDX also relies on an incident electron beam, except an EDX unit measures X-ray energies generated by the impinging beam. Each element generates a unique X-ray signature; the EDX detector measures these discreet energies. EDX actually penetrates approximately 2 microns into the bulk of the sample. However, random examination of various portions of slag, coupled with the semiquantitative nature of the SEM/EDX analysis, did not yield convincingly pertinent data. Therefore, X-ray dot mapping was conducted, which provided more understandable data, both in terms of slag layering and composition. An X-ray dot map is generated by performing numerous EDX scans for individual elements, then compiling the scans in a visual representation. Eventually, specimens consisting of not only the slag, but of the adjacent RCC substrate as well were cross-sectioned. X-Ray dot mapping of the materialographicallymounted and -polished cross- sections provided a visual representation of both the layering sequence and compositional characteristics of the slag. Contemporaneously, Electron Spectroscopy for Chemical Analysis/X-Ray Photoelectron Spectroscopy (ESCA/XPS) and powdered X-Ray Diffraction (XRD) were performed to further characterize the deposits and to attempt to identify what, if any, compounds were present. The ESCA/XPS analysis allowed the analyst to "sputter" into the sample with an electron gun, aiding in the identification of the layering sequence. XPS uses photons, rather than electrons, which impinge upon the surface of the sample. XPS measures the electrons emitted from within the first 5 nm of the sample's surface. The XRD measures the scatter angles of incident X-rays; the angle and intensity of scatter depend upon the crystalline structure of the pulverized sample. XRD is considered a qualitative rather than quantitative technique. ESCA/XPS revealed that the final layer to deposit was predominantly carbonaceous. XRD was successful in identifying specific compounds, such as Al 2O3, Al and/or Al3 21SiO47, mullite (3(Al2)O3 -SiO2), and nickel-aluminides. Eventually, Electron MicroProbe Analysis (EMPA) was conducted on the marialographically-prepared cross- sections of selected slag deposits. Microprobe combines SEM and Wavelength Dispersive X-Ray Spectroscopy (WDS), and, like EDX, uses a narrowly-focused high-energy electron beam impinging upon a specimen to elicit, in the case of EPMA, characteristic X-rays with specific wavelengths. This quantitative, analytical tool proved the most useful in determining depositional layering and composition of the slag deposits. This information was utilized in verifying the location of the breach in the left leading edge of the wing of the Columbia.
McDaniels, Steven J.↗
High-energy electron-beam deposition onto a hot graphite surface.
The momentum transfer and blow-off vapor yield resulting from the deposition of a pulsed high-power electron beam onto a plane graphite target with surface temperatures of 300 K and 5000 K are examined experimentally. The results show that with identical electron beams the momentum transfer and vapor yield are between two and three times larger when irradiating the 5000 K surface as compared with the 300 K surface.
Robin, J. E.↗
Controlling radiolysis chemistry on the nanoscale in liquid cell scanning transmission electron microscopy
When high-energy electrons from scanning transmission electron microscope (STEM) are interacting with the liquid, the vast majority of the chemical reactions that are observed are induced by the radiolysis breakdown of the liquid molecules.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
An empirical relationship for the penetration of 1 to 3 MeV electrons
Empirical correlation of high energy electrons into materials allows predictions of practical ranges (measure of electron penetration) for different elements and alloys.
Stevenson, F. R.↗
Electron Impact Ionization: A New Parameterization for 100 eV to 1 MeV Electrons
Low, medium and high energy electrons can penetrate to the thermosphere (90-400 km; 55-240 miles) and mesosphere (50-90 km; 30-55 miles). These precipitating electrons ionize that region of the atmosphere, creating positively charged atoms and molecules and knocking off other negatively charged electrons. The precipitating electrons also create nitrogen-containing compounds along with other constituents. Since the electron precipitation amounts change within minutes, it is necessary to have a rapid method of computing the ionization and production of nitrogen-containing compounds for inclusion in computationally-demanding global models. A new methodology has been developed, which has parameterized a more detailed model computation of the ionizing impact of precipitating electrons over the very large range of 100 eV up to 1,000,000 eV. This new parameterization method is more accurate than a previous parameterization scheme, when compared with the more detailed model computation. Global models at the National Center for Atmospheric Research will use this new parameterization method in the near future.
Fang, Xiaohua↗
Compton and synchrotron processes in spherically-symmetric non-thermal sources
A framework is developed for the accurate calculation of Compton and synchrotron processes in a special class of spherically-symmetric sources. The models considered take a distribution in magnetic field values and high-energy electron density that varies smoothly from central values to values at the outer boundary of the source. Further, the assumption is made that the magnetic field has local disorder (isotropy) and the high-energy electron distribution has local isotropy. Then, in terms of parameters of the source, the synchrotron brightness distribution, total synchrotron flux, Compton-synchrotron flux, and synchrotron self-absorption turnover are all computed accurately. Results are given with a view toward application to the analysis of compact non-thermal sources.
Gould, R. J.↗
Latitude and local time dependence of precipitated low energy electrons at high latitudes
Data from particle detectors on board the satellite OGO-4 were used to study the precipitation of electrons in the energy range 0.7 to 24 keV. The latitude dependence of these particles in the local time region from midnight to dawn was investigated in detail. The analysis shows that the precipitation of particles of energies 2.3 to 24 keV is centered at an invariant latitude of about 68 deg at midnight with a clear shift in latitude with increasing local time and this shift is more pronounced for lower energies. The highest fluxes of particles in this energy interval are measured at midnight and they decrease rapidly with local time. The data in the energy range 2.3 to 24 keV support a theory where particles are injected in the midnight region from the tail gaining energy due to a betatron process and then drift eastwards in a combined electric and magnetic field. The main part of the electrons at 0.7 keV show a different behavior. They seem to undergo an acceleration process which is rather local, sometimes giving field aligned fluxes which may be super-imposed on the background precipitation.
Gustafsson, G.↗
Spectral evolution of microwaves and hard X-rays in the 1989 March 18 flare and its interpretation
We analyze the time variation of microwave spectra and hard X-ray spectra of 1989 March 18, which are obtained from the Solar Array at the Owens Valley Radio Observatory (OVRO) and the Hard X-Ray Burst Spectrometer (HXRBS) on the Solar Maximum Mission (SMM), respectively. From this observation, it is noted that the hard X-ray spectra gradually soften over 50 - 200 keV on-and-after the maximum phase while the microwaves at 1 - 15 GHz show neither a change in spectral shape nor as rapid a decay as hard X-rays. This leads to decoupling of hard X-rays from the microwaves in the decay phase away from their good correlation seen in the initial rise phase. To interpret this observation, we adopt a view that microwave-emitting particles and hard X-ray particles are physically separated in an inhomogeneous magnetic loop, but linked via interactions with the Whistler waves generated during flares. From this viewpoint, it is argued that the observed decoupling of microwaves from hard X-rays may be due to the different ability of each source region to maintain high energy electrons in response to the Whistler waves passing through the entire loop. To demonstrate this possibility, we solve a Fokker-Planck equation that describes evolution of electrons interacting with the Whistler waves, taking into account the variation of Fokker-Planck coefficients with physical quantities of the background medium. The numerical Fokker-Planck solutions are then used to calculate microwave spectra and hard X-ray spectra for agreement with observations. Our model results are as follows: in a sronger field region, the energy loss by electron escape due to scattering by the waves is greatly enhanced resulting in steep particle distributions that reproduce the observed hard X-ray spectra. In a region with weaker fields and lower density, this loss term is reduced allowing high energy electrons to survive longer so that microwaves can be emitted there in excess of hard X-rays during the decay phase of the flare. Our results based on spectral fitting of a flare event are discussed in comparison with previous studies of microwaves and hard X-rays based on either temporal or spatial information.
Lee, Jeongwoo W.↗
Correspondence principle in inelastic scattering.
High energy electron ionization cross section for hydrogen, noting high quantum number correspondence to classical expression
QUANTUM NUMBER↗
Plasma gradient effect on direct laser acceleration
The transfer of a high-intensity laser pulse energy to a high-energy electron beam via the direct laser acceleration mechanism is shown to be significantly enhanced through control of the plasma density gradient. Experiments performed using the OMEGA EP facility's high-intensity beams altered the plasma density and gradients by changing the Mach number and the angle of the gas-jet nozzle to the laser axis. When a long density gradient at the rear of the target is used, the total high-energy electron number measured was enhanced by 4.5 times compared to a shorter rear gradient. Complementary two-dimensional simulations, which follow the laser field evolution and the corresponding electron dynamics, strongly support the key trends observed in the experiment. The effect is twofold, the long density gradient provides the longest acceleration distance while it minimizes the formation of the sheath field as the electron beam exits into the vacuum. This study shows the importance of tailoring the plasma density.
Laser plasma interactions↗
Progress in Understanding Short-Range Structure in Nuclei: An Experimental Perspective
High-energy electron scattering is a clean, precise probe for measurements of hadronic and nuclear structure and plays a key role in understanding the role of high-momentum nucleons (and quarks) in nuclei. Jefferson Lab has dramatically expanded our knowledge of the high-momentum nucleons generated by short-range correlations, providing sufficient insight to model much of their impact on nuclear structure in neutron stars and in low- to medium-energy scattering observables, including neutrino oscillation measurements. These short-range correlations also seem related to the modification of the quark distributions in nuclei, and efforts to improve our understanding of the internal structure of these short-distance and high-momentum configurations in nuclei will provide important input on a wide range of high-energy observables.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Analytical Approximations for Beamstrahlung at Very High Energy Electron-Positron Colliders
Among the many effects that occur in beam-beam electron-positron collisions at TeV energies, emission of hard synchrotron radiation, or beamstrahlung, has special importance. Beamstrahlung determines the energy spectrum of the most energetic electrons, positrons, and photons and supplies the initial condition for the calculation of all other QED processes. In this paper, we show that the description of beamstrahlung simplifies in the limit of large quantum parameter $Υ$, which is realized in 10 TeV collider designs. The beamstrahlung spectra for electrons and photons are given in terms of universal functions. We supply approximations to these functions that will be useful for more general studies of the beam-beam interaction at very high energies.
Accelerator Physics (physics.acc-ph)↗