Search NASA⌕ Search

SEARCH · Search NASA

Results for “Higher-Order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Aspects of the design and performance of a 3-component LDV system

A conventional two color, two component Laser Doppler Velocimeter (LDV) has been converted into one capable of measuring all three components of velocity simultaneously in low-speed flows. All the Reynolds stresses and higher-order products can then be evaluated. The approach followed is to split one of the two colors and to focus a third pair of beams from an off axis direction. The third velocity component is computed from the known geometry of the system. This paper contains details of the system design with emphasis on the additional problems that are encountered through the introduction of the third component. Some preliminary measurements obtained in a vortex/mixing layer interaction are presented and compared directly with those obtained with a cross-wire system.

Bell, J. H.↗
NASA NTRS1985

A three-dimensional boundary-layer method for flow over delta wings with leading-edge separation

A three-dimensional, laminar boundary-layer method is applied to the incompressible flow over a slender delta wing at incidence. The predictor-corrector finite-difference scheme of Matsuno is used to difference the governing equations. The method has the advantages that no iterations are required to advance the solution and the cross-flow derivatives are formed independent of the cross-field direction. The difference scheme is demonstrated to yield accurate numerical results when compared to the exact solution of the three-dimensional boundary-layer equations for parabolic flow over a moving flat plate. The method is applied to delta wings of various sweep angles at angles of attack up to 20 deg., with the inviscid solution determined using a higher-order, three-dimensional panel method.

Woodson, S. H.↗
NASA NTRS1986

On a third-order shear deformation theory for laminated composite shells

A higher-order theory based on an assumed displacement field in which the surface displacements are expanded in powers of the thickness coordinate up to the third order is presented. The theory allows parabolic description of the transverse shear stresses, and therefore the shear correction factors of the usual shear deformation theory are not required in the present theory. The theory also accounts for small strains but moderately large displacements (i.e., von Karman strains). A finite-element model based on independent approximations of the displacements and bending moments (i.e., mixed formulation) is developed. The element is used to analyze cross-ply and angle-ply laminated shells for bending.

Liu, C. F.↗
NASA NTRS1987

Analysis of a Four-Reflector S/X-Band Antenna

Physical optics accounts for near field, cross polarization, and higher-order modes. Report presents physical-optics analysis of four-reflector, 64-m antennas of Deep Space Network. Analysis thorough and detailed. Report has instructional value as example for designers of large microwave dishes with subreflectors and involving reflector surfaces with hyperboloidal, paraboloidal, ellipsoidal, and more complex shapes.

Cha, Alan G.↗
NASA NTRS1986

Group-kinetic theory of turbulence

The two phases are governed by two coupled systems of Navier-Stokes equations. The couplings are nonlinear. These equations describe the microdynamical state of turbulence, and are transformed into a master equation. By scaling, a kinetic hierarchy is generated in the form of groups, representing the spectral evolution, the diffusivity and the relaxation. The loss of memory in formulating the relaxation yields the closure. The network of sub-distributions that participates in the relaxation is simulated by a self-consistent porous medium, so that the average effect on the diffusivity is to make it approach equilibrium. The kinetic equation of turbulence is derived. The method of moments reverts it to the continuum. The equation of spectral evolution is obtained and the transport properties are calculated. In inertia turbulence, the Kolmogoroff law for weak coupling and the spectrum for the strong coupling are found. As the fluid analog, the nonlinear Schrodinger equation has a driving force in the form of emission of solitons by velocity fluctuations, and is used to describe the microdynamical state of turbulence. In order for the emission together with the modulation to participate in the transport processes, the non-homogeneous Schrodinger equation is transformed into a homogeneous master equation. By group-scaling, the master equation is decomposed into a system of transport equations, replacing the Bogoliubov system of equations of many-particle distributions. It is in the relaxation that the memory is lost when the ensemble of higher-order distributions is simulated by an effective porous medium. The closure is thus found. The kinetic equation is derived and transformed into the equation of spectral flow.

Tchen, C. M.↗
NASA NTRS1987

A computational study of thrust augmenting ejectors based on a viscous-inviscid approach

A viscous-inviscid interaction technique is advocated as both an efficient and accurate means of predicting the performance of two-dimensional thrust augmenting ejectors. The flow field is subdivided into a viscous region that contains the turbulent jet and an inviscid region that contains the ambient fluid drawn into the device. The inviscid region is computed with a higher-order panel method, while an integral method is used for the description of the viscous part. The strong viscous-inviscid interaction present within the ejector is simulated in an iterative process where the two regions influence each other en route to a converged solution. The model is applied to a variety of parametric and optimization studies involving ejectors having either one or two primary jets. The effects of nozzle placement, inlet and diffuser shape, free stream speed, and ejector length are investigated. The inlet shape for single jet ejectors is optimized for various free stream speeds and Reynolds numbers. Optimal nozzle tilt and location are identified for various dual-ejector configurations.

Lund, Thomas S.↗
NASA NTRS1986

Comments on Lambeck and Coleman - 'The earth's shape and gravity field: A report of progress from 1958 to 1982'

The accuracy and validation of global gravity models based on satellite data are discussed, responding to the statistical analysis of Lambeck and Coleman (1983) (LC). Included are an evaluation of the LC error spectra, a summary of independent-observation calibrations of the error estimates of the Goddard Earth Models (GEM) 9 and L2 (Lerch et al., 1977, 1979, 1982, 1983, and 1985), a comparison of GEM-L2 with GRIM-3B (Reigber et al., 1983), a comparison of recent models with LAGEOS laser ranging, and a summary of resonant-orbit model tests. It is concluded that the accuracy of GEMs 9, 10, and L2 is much higher than claimed by LC, that the GEMs are in good agreement with independent observations and with GRIM-3B, and that the GEM calibrations were adequate. In a reply by LC, a number of specific questions regarding the error estimates are addressed, and it is pointed out that the intermodel discrepancies of the greatest geophysical interest are those in the higher-order coefficients, not discussed in the present comment. It is argued that the differences among the geoid heights of even the most recent models are large enough to call for considerable improvements.

Lerch, F. J.↗
NASA NTRS1986

Nonlinear flexure and torsion of rotating beams, with application to helicopter rotor blades. I - Formulation. II - Response and stability results

The dynamic response and aeroelastic stability of rotating beams such as helicopter blades is investigated analytically. The Hamilton principle is used to formulate the equations of motion for extensional and inextensional beams with precone angles and variable pitch angles, taking higher-order nonlinearities into account. The derivation of the equations and their approximate solution by a Galerkin procedure are explained in detail, and numerical results of equilibrium solutions and stability analyses are presented graphically.

Crespo Da Silva, M. R. M.↗
NASA NTRS1986

Photometry of Phoebe

The nonsynchronous rotational period and light curve for Phoebe are analyzed. The variations in CCD chip pixel response, the intensity of the images, the sky background level, and the atmospheric effects and color response of the detector are examined. Consideration is also given to brightness variations and the solar phase function at small phase angles (0.2-1.2 deg) of the light curve. The Phoebe surface is compared with asteroid surfaces by fitting the data to a linear phase function. It is determined that the Phoebe's sidereal rotational period is refined to 9.282 + or - 0.015 hr, the light curve in V filter exhibits 20 percent brightness variations with weaker higher-order harmonics, and the solar phase coefficient at angles less than 1.2 deg is 0.180 + or 0.035 mag/deg. The Phoebe data at small phase angles correlated well with a phase function for C-type asteroids.

Kruse, S.↗
NASA NTRS1986

A generalization of the method of harmonic balance

A procedure is provided for generalizing the method of harmonic balance to obtain higher-order approximations to the periodic solutions of differential equations for two systems, one a conservative system and the other nonconservative. The procedure is currently being applied to investigate the possible solution behaviors of singular, nonlinear oscillators, where the usual perturbation methods do not work.

Mickens, R. E.↗
NASA NTRS1987

A study of some approximations in the modeling of a coupled rotor/fuselage aeromechanical system

Equations of motion for a three-bladed hingeless rotor coupled to a gimbal-supported fuselage are developed. A brief derivation of the equations is presented, including the assumptions made, the ordering scheme, and a discussion of both the source of the aerodynamic axial load term and the reason for differences due to hinge sequence. The solution of the equations is discussed, including linearization, the use of multiblade coordinates to eliminate periodic coefficients, and specialization to a root-sprung model. The treatment of the blade root offset by using an ordering scheme to neglect higher-order terms is found to affect results in pitch and roll. A small aerodynamic loading term in the blade axial direction has a significant effect at large collective pitch settings, as does the choice of a flap-lag or a lag-flap transformation sequence for blade motion. The results for a hingeless rotor also differ significantly from those for the root-sprung model when the nonrotating natural frequencies are matched.

Blelloch, P. A.↗
NASA NTRS1987

A two-fluid model for solar wind fluid with higher order moments

A spherically symmetric two-fluid model for the solar wind with higher-order moments is presented. In this model, continuity, momentum, temperature and heat flux equations for two components (electrons and protrons) in steady solar wind states are simultaneously solved by using a time-dependent method. This work is used to compare solutions of the steady-state solar wind with and without higher order moments, and to study the effects of thermal conduction. The coupling between electrons and protrons is also given special attention. The numerical solutions of the steady-state solar wind in both subsonic and supersonic regions between the Sun and 1 AU are obtained and graphically illustrated.

Wang, Jingfang↗
NASA NTRS1986

A fractal model for crustal deformation

It is hypothesized that crustal deformation occurs on a scale-invariant matrix of faults. For simplicity, a two-dimensional pattern of hexagons on which strike-slip faulting occurs is considered. The behavior of the system is controlled by a single parameter, the fractal dimension. Deformation occurs on all scales of faults. The fractal dimension determines the fraction of the total displacement that occurs on the first-order or primary faults. The value of the fractal dimension can be obtained from the frequency-magnitude relation for earthquakes. The results are applied to the San Andreas fault system in central California. Earthquake studies give D = 1.90. The main strand of the San Andreas fault is associated with the primary faults of the fractal system. It is predicted that the relative velocity across the main strand is 2.93 cm/yr. The remainder of the relative velocity of 5.5 cm/yr between the Pacific and North American plates occurs on higher-order faults. The predicted value is in reasonably good agreement with the value 3.39 + or - 0.29 cm/yr obtained from geological studies.

Turcotte, D. L.↗
NASA NTRS1987

Variability of ethane on Jupiter

Varying stratospheric temperature profiles and C2H6 altitude distributions furnish contexts for the evaluation of ethane abundances and distributions in the Jupiter stratosphere. Substantial ethane line emission and retrieved mole fraction variability is noted near the footprint of Io's flux tube, as well as within the auroral regions. It is suggested that this and other observed phenomena are due to the modification of local stratospheric chemistry by higher-order effects, which are in turn speculated to be due to the precipitation of charged particles along magnetic field lines.

Kostiuk, Theodor↗
NASA NTRS1987

Covariance and the hierarchy of frame bundles

This is an essay on the general concept of covariance, and its connection with the structure of the nested set of higher frame bundles over a differentiable manifold. Examples of covariant geometric objects include not only linear tensor fields, densities and forms, but affinity fields, sectors and sector forms, higher order frame fields, etc., often having nonlinear transformation rules and Lie derivatives. The intrinsic, or invariant, sets of forms that arise on frame bundles satisfy the graded Cartan-Maurer structure equations of an infinite Lie algebra. Reduction of these gives invariant structure equations for Lie pseudogroups, and for G-structures of various orders. Some new results are introduced for prolongation of structure equations, and for treatment of Riemannian geometry with higher-order moving frames. The use of invariant form equations for nonlinear field physics is implicitly advocated.

Estabrook, Frank B.↗
NASA NTRS1953

Comparison of the Experimental and Theoretical Distribution of Lift on a Slender Inclined Body of Revolution at M = 2

Pressure distributions and force characteristics have been determined for a body of revolution consisting of a fineness ratio 5.75, circular-arc, ogival nose tangent to a cylindrical afterbody for an angle-of-attack range of 0 degrees to 35.5 degrees. The free-stream Mach number was 1.98 and the free-stream Reynolds number was approximately 0.5 x 10 sup 6, based on body diameter. Comparison of the theoretical and experimental pressure distributions shows that for zero lift, either slender-body theory or higher-order theories yield results which are in good agreement with experiment. For the lifting case, good agreement with theory is found only for low angles of attack and for the region in which the body cross-sectional area is increasing in the downstream direction. Because of the effects of cross-flow separation and the effects of compressibility due to the high cross-flow Mach numbers at large angles of attack, the experimental pressure distributions differ from those predicted by potential theory. Although the flow about the inclined body was, in general, similar to that assumed as the basis for Allen's method of estimating the forces resulting from viscous effects (NACA RM A91I26), the distribution of the forces was significantly different from that assumed. Nevertheless, the lift and pitching-moment characteristics were in fair agreement with the estimated value.

Perkins, Edward W↗
NASA NTRS1942

On the use of residue theory for treating the subsonic flow of a compressible fluid

A new mathematical technique, due to Milne-Thomson, is used to obtain an improved form of the method of Poggi for calculating the effect of compressibility on the subsonic flow past an obstacle. By means of this new method, the difficult surface integrals of the original Poggi method can be replaced by line integrals. These line integrals are then solved by the use of residue theory. In this way an equation is obtained giving the second-order effect of compressibility on the velocity of the fluid. The method is practicable for obtaining the higher-order effects of compressibility on the velocity field. As an illustration of the general result, the flow past an elliptic cylinder is discussed.

Kaplan, Carl↗
NASA NTRS1982

Handling Qualities Specifications for U.S. Military Helicopters

Inadequacies in the military specification for helicopter handling qualities, MIL-H-8501A, have long been recognized, and the latest procurements by the U.S. Army used special Prime Item Development Specifications (PIDS). This paper assesses the efficacy of these PIDS and suggests that changes should be made. In particular, the structure developed in MIL-F-8785B (ASG) (the specification for flying qualities of piloted airplanes) should be incorporated. Improved requirements must be based on a systematic data base and concentrated on topics most important in preliminary design: static and dynamic stability, control power and sensitivity, and interaction with controllers and displays. Emphasis should be on current military helicopter missions and helicopter idiosyncrasies such as cross-coupling, nonlinearities, and higher-order dynamics.

Key, David L.↗