Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydride Formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Control of Catalyst Isomers Using an N -Phenyl-Substituted RN(CH 2 CH 2 P i Pr 2 ) 2 Pincer Ligand in CO 2 Hydrogenation and Formic Acid Dehydrogenation

A novel pincer ligand, i Pr PN Ph P [PhN- (CH 2 CH 2 P i Pr 2 ) 2 ], which is an analogue of the versatile MACHO ligand, iPr PN H P [HN(CH 2 CH 2 P i Pr 2 ) 2 ], was synthesized and characterized. The ligand was coordinated to ruthenium, and a series of hydride-containing complexes were isolated and characterized by NMR and IR spectroscopies, as well as X-ray diffraction. Comparisons to previously published analogues ligated by iPr PN H P and iPr PN Me P [CH 3 N(CH 2 CH 2 P i Pr 2 ) 2 ] illustrate that there are large changes in the coordination chemistry that occur when the nitrogen substituent of the pincer ligand is altered. For example, ruthenium hydrides supported by the iPr PN Ph P ligand always form the syn isomer (where syn/anti refer to the relative orientation of the group on nitrogen and the hydride ligand on ruthenium), whereas complexes supported by iPr PN H P form the anti isomer and complexes supported by iPr PN Me P form a mixture of syn and anti isomers. We evaluated the impact of the nitrogen substituent of the pincer ligand in catalysis by comparing a series of iPr PN R P (R = H, Me, Ph)-ligated ruthenium hydride complexes as catalysts for formic acid dehydrogenation and carbon dioxide (CO 2 ) hydrogenation to formate. The iPr PN Ph P-ligated species is the most active for formic acid dehydrogenation, and mechanistic studies suggest that this is likely because there are kinetic advantages for catalysts that operate via the syn isomer. In CO 2 hydrogenation, the iPr PN Ph P-ligated species is again the most active under our optimal conditions, and we report some of the highest turnover frequencies for homogeneous catalysts. Experimental and theoretical insights into the turnover-limiting step of catalysis provide a basis for the observed trends in catalytic activity. Additionally, the stability of our complexes enabled us to detect a previously unobserved autocatalytic effect involving the base that is added to drive the reaction. Overall, by modifying the nitrogen substituent on the MACHO ligand, we have developed highly active catalysts for formic acid dehydrogenation and CO 2 hydrogenation and also provided a framework for future catalyst development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO 2.8 H 0.2 Catalyst for CO 2 Hydrogenation to Methanol

Abstract Tuning the anionic site of catalyst supports can impact reaction pathways by creating active sites on the support or influencing metal‐support interactions when using supported metal nanoparticles. This study focuses on CO 2 hydrogenation over supported Cu nanoparticles, revealing a 3‐fold increase in methanol yield when replacing oxygen anions with hydrides in the perovskite support (Cu/BaTiO 2.8 H 0.2 yields ~146 mg/h/gCu vs. Cu/BaTiO 3 yields ~50 mg/h/gCu). The contrast suggests that significant roles are played by the support hydrides in the reaction. Temperature programmed reaction and isotopic labelling studies indicate that BaTiO 2.8 H 0.2 surface hydride species follow a Mars van Krevelen mechanism in CO 2 hydrogenation, promoting methanol production. High‐pressure steady‐state isotopic transient kinetic analysis (SSITKA) studies suggest that Cu/BaTiO 2.8 H 0.2 possesses both a higher density and more active and selective sites for methanol production compared to Cu/BaTiO 3 . An operando high‐pressure diffuse reflectance infrared spectroscopy (DRIFTS)‐SSITKA study shows that formate species are the major surface intermediates over both catalysts, and the subsequent hydrogenation steps of formate are likely rate‐limiting. However, the catalytic reactivity of Cu/BaTiO 2.8 H 0.2 towards the formate species is much higher than Cu/BaTiO 3 , likely due to the altered electronic structure of interface Cu sites by the hydrides in the support as validated by density functional theory (DFT) calculations.

He, Yang↗
DOE OSTI2020

Mechanistic Studies on the Insertion of Carbonyl Substrates into Cu-H: Different Rate-Limiting Steps as a Function of Electrophilicity

In this paper, we report mechanistic studies on the insertion reactions of [(NHC)Cu(H)] 2 complexes with carbonyl substrates by UV-vis and 1 H NMR spectroscopic kinetic studies, H/D isotopic labelling, and X-ray crystallography. The results of these comprehensive studies show that the insertion of Cu-H with an aldehyde, ketone, activated ester/amide, and unactivated amide consist of two different rate limiting steps: the formation of Cu-H monomer from Cu-H dimer for more electrophilic substrates and hydride transfer from a transient Cu-H monomer for less electrophilic substrates. We also report spectroscopic and crystallographic characterization of rare Cu-hemiacetalate and Cu-hemiaminalate moieties from the insertion of an ester and amide into the Cu-H bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

TOF-SIMS analysis of decoherence sources in superconducting qubits

Superconducting qubits have emerged as a potentially foundational platform technology for addressing complex computational problems deemed intractable with classical computing. Despite recent advances enabling multiqubit designs that exhibit coherence lifetimes on the order of hundreds of μs, material quality and interfacial structures continue to curb device performance. Two-level system defects in the thin superconducting film and adjacent dielectric regions introduce stochastic noise and dissipate electromagnetic energy at the cryogenic operating temperatures. In this study, we utilize time-of-flight secondary ion mass spectrometry to understand the role specific fabrication procedures play in introducing such dissipation mechanisms in these complex systems. We interrogated Nb thin films and transmon qubit structures fabricated through slight modifications in the processing and vacuum conditions. We find that when the Nb film is sputtered onto the Si substrate, oxide and silicide regions are generated at various interfaces. We also observe that impurity species, such as niobium hydrides and carbides, are incorporated within the niobium layer during the subsequent lithographic patterning steps. The formation of these resistive compounds likely impacts the superconducting properties of the Nb thin film. Additionally, we observe the presence of halogen species distributed throughout the patterned thin films. We conclude by hypothesizing the source of such impurities in these structures in an effort to intelligently fabricate superconducting qubits and extend coherence times moving forward.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Uranium Bed Design Parameters for Tritium Plants Supporting Fusion Reactors

Uranium hydride is commonly used to store hydrogen or its isotopes in a solid state. The Self-Assaying Tritium Accountancy and Containment Unit for ITER (STACI) is a 5.2-kg bed of depleted uranium (dU) capable of holding up to 33 mol of hydrogen or its isotopes. Here we summarize the data analysis of past experimental campaigns with STACI, with the aim of describing the kinetics and thermodynamics of the hydriding process. Computed tomography imaging was performed on STACI both before and after its experimental campaign, and a high degree of swelling was observed in the dU. Literature on studies in regard to the swelling of large (multikilogram) quantities of uranium hydride for storage applications was not identified during this study. Data from the experimental campaign, as well as data on the formation reaction, are presented. The authors hope to create an analytical model of STACI based on these data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

A conformational equilibrium in the nitrogenase MoFe protein with an α-V70I amino acid substitution illuminates the mechanism of H 2 formation

Study of α-V70I-substituted nitrogenase MoFe protein identified Fe6 of FeMo-cofactor (Fe 7 S 9 MoC-homocitrate) as a critical N 2 binding/reduction site. Freeze-trapping this enzyme during Ar turnover captured the key catalytic intermediate in high occupancy, denoted E 4 (4H), which has accumulated 4[e — /H + ] as two bridging hydrides, Fe2–H–Fe6 and Fe3–H–Fe7, and protons bound to two sulfurs. E 4 (4H) is poised to bind/reduce N 2 as driven by mechanistically-coupled H 2 reductive-elimination of the hydrides. This process must compete with ongoing hydride protonation (HP), which releases H 2 as the enzyme relaxes to state E 2 (2H), containing 2[e — /H + ] as a hydride and sulfur-bound proton; accumulation of E 4 (4H) in α-V70I is enhanced by HP suppression. EPR and 95 Mo ENDOR spectroscopies now show that resting-state α-V70I enzyme exists in two conformational states, both in solution and as crystallized, one with wild type (WT)-like FeMo-co and one with perturbed FeMo-co. These reflect two conformations of the Ile residue, as visualized in a reanalysis of the X-ray diffraction data of α-V70I and confirmed by computations. EPR measurements show delivery of 2[e — /H + ] to the E 0 state of the WT MoFe protein and to both α-V70I conformations generating E 2 (2H) that contains the Fe3–H–Fe7 bridging hydride; accumulation of another 2[e — /H + ] generates E 4 (4H) with Fe2–H–Fe6 as the second hydride. E 4 (4H) in WT enzyme and a minority α-V70I E 4 (4H) conformation as visualized by QM/MM computations relax to resting-state through two HP steps that reverse the formation process: HP of Fe2–H–Fe6 followed by slower HP of Fe3–H–Fe7, which leads to transient accumulation of E 2 (2H) containing Fe3–H–Fe7. In the dominant α-V70I E 4 (4H) conformation, HP of Fe2–H–Fe6 is passively suppressed by the positioning of the Ile sidechain; slow HP of Fe3–H–Fe7 occurs first and the resulting E 2 (2H) contains Fe2–H–Fe6. Importantly, it is this HP suppression in E 4 (4H) that enables α-V70I MoFe to accumulate E 4 (4H) in high occupancy. In addition, HP suppression in α-V70I E 4 (4H) kinetically unmasks hydride reductive-elimination without N 2 -binding, a process that is precluded in WT enzyme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electron Redistribution within the Nitrogenase Active Site FeMo-cofactor During Reductive Elimination of H2 to Achieve N=N Triple-Bond Activation

Nitrogen fixation by nitrogenase begins with accumulation of four reducing equivalents at the active-site FeMo-cofactor (FeMo-co), generating a state (denoted E4(4H)) with two [Fe-H-Fe] bridging hydrides. Recently, photolytic reductive elimination (re) of the E4(4H) hydrides showed that enzymatic re of E4(4H) hydride yields an H2-bound complex (E4(H2,2H)), in a process corresponding to a formal 2-electron reduction of the metal-ion core of FeMo-co. The resulting electron-density redistribution from Fe-H bonds to the metal ions themselves enables N2 to bind with concomitant H2 release, a process illuminated here by QM/MM molecular dynamics simulations. What is the nature of this redistribution? Although E4(H2,2H) hasn’t been trapped, cryogenic photolysis of E4(4H) provides a means to address this question. Photolysis of E4(4H) causes hydride-re with release of H2, generating doubly-reduced FeMo-co (denoted E4(2H)*), the extreme limit of the electron-density redistribution upon formation of E4(H2,2H). Here we examine the doubly-reduced FeMo-co core of the E4(2H)* limiting-state by 1H, 57Fe, and 95Mo ENDOR to illuminate the partial electron-density redistribution upon E4(H2,2H) formation during catalysis, complementing these results with corresponding DFT computations. Inferences from the E4(2H)* ENDOR results as extended by DFT computations include: (i) the Mo-site participates negligibly, and overall it is unlikely that Mo changes valency throughout the catalytic cycle; (ii) two distinctive E4(4H) 57Fe signals are suggested as associated with ‘anchors’ of one bridging hydride, two others with anchors of the second, with NBO-analysis identifying one anchor of each hydride as a major recipient of electrons released upon breaking Fe-H bonds.

Lukoyanov, Dmitriy↗
DOE OSTI2025

Dynamic Features of Cu-Ceria Interface under CO 2 Hydrogenation to Methanol

It is generally accepted that metal–support interaction is very important for the hydrogenation of CO 2 to methanol, but little has been revealed about the feature of interfacial active sites under real reaction conditions since there are only limited techniques that can be applied under high-pressure conditions. Here, in this work, by combining multiple in situ and operando techniques on a model Cu/ceria catalyst, we have tracked Cu and ceria sites for methanol formation. Under the reaction condition, it is found that upon reaching the reaction temperature, oxidized Cu species in the as-synthesized catalyst immediately change into metallic Cu species. Following this, it is the gradual formation of methanol, the changing rate of which coincides with the formation of a unique Ce 3+ species. The combined experimental results and density functional theory (DFT) calculations have determined that the formed Ce 3+ sites driven by the reaction conditions are bound to hydrides, adsorbed carbonate species, and interfacial active Cu sites. The Cu-ceria interaction in this complex moiety is weak and can be easily disturbed with reaction environment variations, leading to dynamic changes at the interface upon the hydrogenation of active carbonate intermediates, which are precursors for the formation of methanol. The formation of this unique Cu–Ce 3+ interface and its dynamicity lead to an increase of methanol selectivity from less than 20% to 60%. These results suggest that reactant-derived species (H – and carbonate in this work) can be essential components of the active center with the functions of manipulating the metal−oxide interaction and directing reaction pathways.

CO2 hydrogenation to methanol↗
DOE OSTI2020

Breaking Scaling Relationships in CO 2 Electroreduction with Isoelectronic Analogs [Fe 4 N(CO) 12 ] – and [Fe 3 MnO(CO) 12 ] –

[Fe 4 N(CO) 12 ] – and [Fe 3 MnO(CO) 12 ] – have the same total electron count and overall charge, as well as similar reduction potentials of –1.21 and –1.17 V vs SCE in MeCN, respectively. Both clusters form the reduced hydride upon single electron transfer (ET) and proton transfer (PT). It is known that [Fe 4 N(CO) 12 ] – is an electrocatalyst for selective CO 2 reduction to formate at –1.2 V vs SCE in either pH 7 buffered water or in MeCN/H 2 O (95:5) and an effective electrocatalyst for H + reduction to H 2 under N 2 under the same conditions. In contrast, [Fe 3 MnO(CO) 12 ] – affords no products upon electrolysis, beyond [H-Fe 3 MnO(CO) 12 ] – . Herein, we determine that [H-Fe 3 MnO(CO) 12 ] – is a weaker hydride donor than [H-Fe 4 N(CO) 12 ] – by about 4 kcal mol –1 , and this is a breaking of the hydricity versus reduction potential scaling relationship previously established for a series of metal carbonyl clusters electrocatalysts.

14 SOLAR ENERGY↗
DOE OSTI2025

Photodriven Ammonia Synthesis from N 2 and H 2 : Recycling of a Molecular Molybdenum Nitride

Here, the synthesis of ammonia from its elements, N 2 and H 2 , is the most atom-economical and thermodynamically preferred route but presents a high kinetic barrier and thus is rare using molecular compounds. Irradiation of a molecular molybdenum nitride prepared from N 2 cleavage with visible light in the presence of an iridium photocatalyst and 1–4 atm of H 2 produced high yields of ammonia along with the formation of a cationic, formally molybdenum(VI) pentahydride as the major molybdenum-containing product. Continued irradiation of the molybdenum hydride under an N 2 atmosphere resulted in regeneration of the molybdenum nitride that was recycled and used for additional hydrogenation to generate more ammonia, demonstrating superstoichiometric batch ammonia synthesis using only N 2 and H 2 with molecular compounds under ambient conditions.

Hydrogenation↗
DOE OSTI2021

Understanding the TiH (2-x) /TiO y System at Elevated Temperature: A Literature Review

Titanium hydride of varying TiH stoichiometry is used in pyrotechnic compositions. In order to yield consistent performance, manufacturing processes must be developed to ensure precise and reproducible material properties, including composition and morphology. Legacy synthesis protocols are not comprehensive nor are the required apparatuses still available. To guide the development of novel production procedures, this report reviews literature on relevant chemical reactions and diffusion events occurring at elevated temperature in the TiH (2-x) /TiO y system. Titanium hydride exposed to air spontaneously forms a passivating oxide layer. Upon heating, significant hydrogen release, which is accompanied by changes to the surface oxide layer, is noted by 375–400°C. At higher temperatures (above about 500°C) the oxide layer is reported to be essentially nonexistent as a result of oxide-layer dissolution processes and, potentially, oxide-layer reduction due to water formation. Based on the reviewed literature, we hypothesize that, by 500°C, the surface layer consists of an oxyhydride phase, which is a solid solution of oxygen in titanium hydride. We believe that hydrogen release from titanium hydride is controlled by the kinetics of molecular hydrogen desorption on the oxyhydride surface. No literature data is available for corresponding activation energies of the dynamic desorption process, and the equilibrium phase diagram of this three-component system remains largely unexplored as well. These gaps in knowledge might be addressed through coordinated computational modeling and experimental efforts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hot Hydride Superconductivity Above 550 K

The search for room temperature superconductivity has accelerated in the last few years driven by experimentally accessible theoretical predictions that indicated alloying dense hydrogen with other elements could produce conventional superconductivity at high temperatures and pressures. These predictions helped inform the synthesis of simple binary hydrides that culminated in the discovery of the superhydride LaH 10 with a superconducting transition temperature T c of 260 K at 180 GPa. We have now successfully synthesized a metallic La-based superhydride with an initial T c of 294 K. When subjected to subsequent thermal excursions that promoted a chemical reaction to a higher order system, the Tc onset was driven irreversibly to 556 K. X-ray characterization confirmed the formation of a distorted LaH 10 based backbone that suggests the formation of ternary or quaternary compounds with substitution at the La and/or H sites. The results provide evidence for hot superconductivity, aligning with recent predictions for higher order hydrides under pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Synthesis and structural characterization of 2,2’-bipyridine zinc formate: Analysis of formate bonding and hydrosilylation of CO 2 and carbonyl compounds

The zinc formate compound (bipy)Zn(O 2 CH) 2 is obtained via the reaction of Zn(O 2 CH) 2 with 2,2’-bipyridine (bipy). In addition, (bipy)Zn(O 2 CH) 2 may be formed from zinc hydride via addition of bipy followed by addition of (i) HCO 2 H and (ii) CO 2 . The molecular structure of (bipy)Zn(O 2 CH) 2 has been determined by X-ray diffraction, thereby demonstrating that it exists as a monomeric species with a distorted tetrahedral zinc center and monodentate formate ligands. Analysis of the bonding within the formate ligand indicates that the zinc–formate moiety is not best represented by a Zn–O–C(=O)H resonance structure, but instead possesses a significant ionic component that reduces the C=O bond order and increases the C–O bond order. The formate compound (bipy)Zn(O 2 CH) 2 participates in hydrosilylation transformations involving CO 2 and carbonyl compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reactivity of [Tism Pr i Benz ]MgH and [Tism Pr i Benz ]MgMe towards Carbonyl Compounds: Access to Terminal Alkoxide and Enolate Complexes

The hydride and methyl compounds [Tism Pr i Benz ]MgH and [Tism Pr i Benz ]MgMe undergo insertion of the carbonyl moieties of non-enolizable aldehydes and ketones such as PhCHO and Ph 2 CO into the Mg–H and Mg–Me bonds to form alkoxide compounds, namely [Tism Pr i Benz ]MgOCH 2 Ph, [Tism Pr i Benz ]MgOCHPh 2 , [Tism Pr i Benz ]MgMOCH(Me)Ph and [Tism Pr i Benz ]MgOCMePh 2 . In contrast to the insertion of the carbonyl moiety, the reactions of the enolizable ketones Me 2 CO and PhC(O)Me with [Tism Pr i Benz ]MgMe afford the enolate complexes, [Tism Pr i Benz ]MgOC(Me)=CH 2 and [Tism Pr i Benz ]MgOC(Ph)=CH 2 . The formation of [Tism Pr i Benz ]MgOC(Me)=CH 2 is of note because methyl Grignard reagents preferentially react with acetone to form t-butoxide derivatives. The hydride compound, [Tism Pr i Benz ]MgH, also reacts with acetone to yield the enolate compound, [Tism Pr i Benz ]MgOC(Me)=CH 2 , but while the overall transformation is similar to that of the methyl derivative, [Tism Pr i Benz ]MgMe, the enolate compound is not the initially formed product. Specifically, acetone undergoes preferential insertion into the Mg–H bond to generate the corresponding alkoxide, [Tism Pr i Benz ]MgOPr i , which subsequently converts to the respective enolate in the presence of excess acetone. Furthermore, the relative ability of the hydride and methyl compounds to undergo insertion of carbonyl compounds into the Mg–H and Mg–Me bonds has been addressed computationally, which indicates that the barrier for insertion of the carbonyl group into the Mg–H bond is lower than that for insertion into the Mg–Me bond. The molecular structures of [Tism Pr i Benz ]MgOCH 2 Ph, [Tism Pr i Benz ]MgOCHPh 2 , [Tism Pr i Benz ]MgOCMePh 2 , [Tism Pr i Benz ]MgOC(Me)=CH 2 and [Tism Pr i Benz ]MgOC(Ph)=CH 2 have been determined by X-ray diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interface instabilities in hafnium hydride entrained iron metal matrix composites

The chemical interactions in Fe–HfH 2 metal matrix composites (MMCs) are studied across multiple length scales to elucidate the decomposition of the parent phases and corresponding reaction zone physics during direct current sintering. Fe–HfH 2 composites were synthesized with increasing as-mixed hydride contents of Fe–25% HfH 2 , Fe–40% HfH 2 , Fe–55% HfH 2 , and Fe–70% HfH 2 (all in vol. %) to demonstrate the ability to achieve sintered MMCs with target hydride contents. Samples were probed across multiple length scales through a multi-modal workflow employing x-ray diffraction, scanning electron microscopy and segmentation analysis, and synchrotron techniques including hard x-ray fluorescence mapping and nanoprobe x-ray absorption near-edge structure measurements. Under the selected sintering temperature and pressure conditions, hydrogen evolution is seen to evolve through parallel paths: thermal decomposition from during the transformation of HfH 2 to HfH x<2 and through subsequent reaction with the Fe matrix leading to intermetallic phase formation. Specifically, HfFe and HfFe 2 intermetallic formation accelerates the release of hydrogen with a subsequent HfO 2 phase forming at grain boundaries. For this MMC, the consumption or loss of hydrogen can be considerable in compacts with initial hydride loading of 25%–40% HfH 2 approaching 83% hydrogen loss for the lower volume fraction composites. Increasing the volume fraction of HfH 2 to 70% enhanced the retained hydrogen content to 53% and attributed to the reduced interfacial area intrinsic to the increased HfH 2 loading in this MMC.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Destabilizing high-capacity high entropy hydrides via earth abundant substitutions: From predictions to experimental validation

The vast chemical space of high entropy alloys (HEAs) makes trial-and-error experimental approaches for materials discovery intractable and often necessitates data-driven and/or first principles computational insights to successfully target materials with desired properties. In the context of materials discovery for hydrogen storage applications, a theoretical prediction-experimental validation approach can vastly accelerate the search for substitution strategies to destabilize high-capacity hydrides based on benchmark HEAs, e.g. TiVNbCr alloys. Here, in this study, machine learning predictions, corroborated by density functional theory calculations, predict substantial hydride destabilization with increasing substitution of earth-abundant Fe content in the (TiVNb) 75 Cr 25-x Fe x system. The as-prepared alloys crystallize in a single-phase bcc lattice for limited Fe content x < 7, while larger Fe content favors the formation of a secondary C14 Laves phase intermetallic. Short range order for alloys with x < 7 can be well described by a random distribution of atoms within the bcc lattice without lattice distortion. Hydrogen absorption experiments performed on selected alloys validate the predicted thermodynamic destabilization of the corresponding fcc hydrides and demonstrate promising lifecycle performance through reversible absorption/desorption. This demonstrates the potential of computationally expedited hydride discovery and points to further opportunities for optimizing bcc alloy ↔ fcc hydrides for practical hydrogen storage applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Proton-Responsive Ligands Promote CO 2 Capture and Accelerate Catalytic CO 2 /HCO 2 – Interconversion

The synthesis and investigation of [Rh(DHMPE) 2 ][BF 4 ] (1) are reported. 1 features proton-responsive 1,2-bis[(dihydroxymethyl)phosphino]ethane (DHMPE) ligands, which readily capture CO 2 from atmospheric sources upon deprotonation. The protonation state of the DHMPE ligand was observed to have a significant impact on the catalytic reactivity of 1 with CO 2 . Deprotonation and CO 2 binding to 1 result in a ∼10-fold rate enhancement in catalytic degenerate CO 2 reduction with formate, monitored by 12 C/ 13 C isotope exchange between H 12 CO 2 – and 13 CO 2 . Studies performed using a similar complex lacking the hydroxyl ligand functionality ([Rh(DEPE) 2 ][BF 4 ] where DEPE = 1,2-bis(diethylphosphino)ethane) do not show the same rate enhancements when base is added. Based upon the cation-dependent activity of the catalyst, Eyring analysis, and cation sequestration experiments, CO 2 binding to 1 is proposed to facilitate preorganization of formate/CO 2 in the transition state via ligand-based encapsulation of Na + or K + cations to lower the activation energy and increase the observed catalytic rate. Incorporation of proton-responsive DHMPE ligands provides a unique approach to accelerate the kinetics of catalytic CO 2 reduction to formate.

Anions↗
DOE OSTI2025

Polyethylene Upcycling to Liquid Alkanes in Molten Salts under Neat and External Hydrogen Source-Free Conditions

Development of facile approaches to convert plastic waste into liquid fuels under neat conditions is highly desired but challenging, particularly without noble metal catalysts and an external hydrogen source. Herein, highly efficient and selective polyethylene-to-gasoline oil (branched C 6 –C 12 alkanes) conversion was achieved under mild conditions (<170 °C) using commercially available AlCl 3 -containing molten salts as reaction media and to provide catalytic sites (no extra solvents, additives, or hydrogen feeding). The high catalytic efficiency and selectivity was ensured by the abundant active Al sites with strong Lewis acidity (comparable to the Al type in acidic zeolite) and highly ionic nature of the molten salts to stabilize the carbenium intermediates. Dynamic genesis of the Al sites was elucidated via time-resolved Al K-edge soft X-ray and 27 Al NMR, confirming the tricoordinated Al 3+ as active sites and its coordination with the as-generated alkene/aromatic intermediates. Further, the carbenium formation and polyethylene chain variation was illustrated by inelastic neutron scattering (INS) and an isotope-labeling experiment. Theoretical simulations further demonstrated the successive hydride abstraction, β-scission, isomerization, and internal hydrogen transfer reaction pathway with AlCl 3 as active sites. This facile catalytic system can further achieve the conversion of robust, densely assembled, and high molecular weight plastic model compounds to liquid alkane products in the diesel range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗