Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Interface PINNs (I-PINNs): A physics-informed neural networks framework for interface problems

Here, we present a novel physics-informed neural networks (PINNs) framework for modeling interface problems, termed Interface PINNs (I-PINNs). I-PINNs uses different neural networks for any two subdomains separated by a sharp interface such that the neural networks differ only through their activation functions while the other parameters remain identical. The performance of I-PINNs, conventional PINNs, and other existing domain-decomposition PINNs methods such as extended PINNs (XPINNs) and multi-domain PINN (M-PINN) is compared through several one-dimensional, two-dimensional, and three-dimensional benchmark elliptic interface problems. The results demonstrate that I-PINNs provides a root-mean-square-error accuracy, at least two orders of magnitude better than conventional PINNs and XPINNs at approximately one-tenth of the computational cost of conventional PINNs and half the cost of XPINNs. Additionally, while I-PINNs and M-PINN provide comparable accuracies, M-PINN is found to be approximately 50% more expensive.

42 ENGINEERING↗

A comparative study of interface reconstruction methods for multi-material ALE simulations

In this paper we compare the performance of different methods for reconstructing interfaces in multi-material compressible flow simulations. The methods compared are a material-order-dependent Volume-of-Fluid (VOF) method, a material-order-independent VOF method based on power diagram partitioning of cells and the Moment-of-Fluid method (MOF). We demonstrate that the MOF method provides the most accurate tracking of interfaces, followed by the VOF method with the right material ordering. The material-order-independent VOF method performs somewhat worse than the above two while the solutions with VOF using the wrong material order are considerably worse.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Confinement and Decoherence Effect on Excited Electron Transfer at the Semiconductor–Molecule Interface: A First-Principles Dynamics Study

Excited electron dynamics at the semiconductor–molecule interface play a vital role in many solar energy conversion applications and beyond. First-principles dynamics simulation is used to study how excited electron dynamics in a type-II semiconductor–molecule interface is affected when the surface of a bulk semiconductor is replaced with that of a quantum dot. In particular, the interface between the hydrogen-terminated silicon(111) surface and a simple organic molecule is investigated. Quantum confinement was found to significantly slow down the excited electron relaxation and the interfacial transfer of the excited electron. Additionally, the role of decoherence was examined. The decoherence affects the dynamics much more significantly for the interface with the quantum dot, while the bulk surface case is affected only marginally by it. Finally, compared to the excited electron relaxation within the quantum dot, the decoherence effect was found to slow down the interfacial transfer from the quantum dot to the molecule by more than an order of magnitude, exhibiting a significant quantum Zeno effect.

charge transfer↗

Effect of Functional and Electron Correlation on the Structure and Spectroscopy of the Al 2 O 3 (001)–H 2 O Interface

Oxide–water interfaces are ubiquitous, with many applications in industry and the environment, yet there is a great deal of controversy over their properties and microscopic structure. This controversy stems, in part, from the unique H-bond networks formed at different surface terminations and mineral compositions. Density functional theory simulations of these interfaces require an accurate description of both the oxide mineral and water in diverse H-bond environments. Thus, herein we simulate the Al 2 O 3 (001)–H 2 O interface using the PBE, PBE-TS, RPBE, SCAN, and HSE06-TS functionals to determine how calculated interfacial properties depend on the choice of functional. We find that the structure of the first few layers of water at the surface is determined by electron correlation in a way that cannot be approximated using semiemipirical van der Waals corrections. Of the functionals investigated, we find that SCAN yields the most accurate interfacial structure, dynamics, and sum frequency generation spectrum. Furthermore, SCAN leads to a reduction in the order of the 2D H-bond network of water at the alumina surface predicted by GGA functionals, leading to a significant decrease in the anisotropy of the diffusion coefficient at the surface. We emphasize the importance of using a functional which accurately describes electron correlation for more complex oxides, such as transition-metal oxides, where electron correlation may play an even greater role in determining the structure and dynamics of the oxide–water interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pathways for Electron Transfer at MgO–Water Interfaces from Ab Initio Molecular Dynamics

The nature of electron transfer across metal oxide–water interfaces depends significantly on the band gap of the oxide and its band edge energies relative to the potentials of relevant aqueous redox couples. Here we focus on the water interface with MgO, a prototypical wide band gap oxide whose conduction band edge is close in energy to that of water. We investigate the behavior of an excess electron at and out of equilibrium near the interface using ab initio molecular dynamics based on hybrid density functional theory. Our simulations show that under equilibrium conditions the excess electron (donated by an Al impurity in MgO) localizes to a midgap defect state comparable in energy and shape to a hydrated electron in bulk water. To characterize the electron transfer from the conduction band of MgO to interfacial product states, we dope near-equilibrium configurations of the pristine MgO–water system with Al and run short trajectories of these instantaneously out-of-equilibrium systems. Here we observe two distinct products associated with the excess electron: a surface-localized electron (e surf –) and an aqueous hydrogen radical (H • ). The H • pathway exhibits a much higher activation barrier despite being more exoergic, making e surf – the kinetic product. Our characterization of the pathways on the basis of Marcus theory is consistent with the poor observed utility of MgO for water radiolysis. Moreover, we anticipate that the computational framework employed here will be broadly applicable to assessing electron transfer mechanisms at aqueous, photocatalytic interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of dislocation density on thermal boundary conductance across GaSb/GaAs interfaces

We report on the thermal boundary conductance across structurally-variant GaSb/GaAs interfaces characterized by different dislocations densities, as well as variably-rough Al/GaSb interfaces. The GaSb/GaAs structures are epitaxially grown using both interfacial misfit (IMF) and non-IMF techniques. We measure the thermal boundary conductance from 100 to 450 K with time-domain thermoreflectance. The thermal boundary conductance across the GaSb/GaAs interfaces decreases with increasing strain dislocation density. We develop a model for interfacial transport at structurally-variant interfaces in which phonon propagation and scattering parallels photon attenuation. We find that this model describes the measured thermal boundary conductances well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Passivation of In{sub 0.53}Ga{sub 0.47}As/ZrO{sub 2} interfaces by AlN atomic layer deposition process

Reducing defects at III-V/high-k interfaces is essential for optimizing devices built on these materials. Here, the role of an interfacial AlN process at In{sub 0.53}Ga{sub 0.47}As/ZrO{sub 2} interfaces is investigated by hard x-ray photoelectron spectroscopy (HAXPES) and capacitance/voltage (C-V) measurements. C-V measurements show a significant reduction in the density of interface traps with the interfacial AlN process and a capping TiN layer. To elucidate the specific role of the AlN process, blanket films with various deposition processes are compared. The AlN process alone (without subsequent dielectric deposition) reduces InGaAs oxide levels below the HAXPES detection limit, even though the AlN is ultimately found to be oxidized into AlO{sub x} with only trace N incorporation, yet AlN passivation provides a lower D{sub it} (density of interface traps) when compared with an H{sub 2}O-based Al{sub 2}O{sub 3} deposition. The AlN process does not passivate against re-oxidation of the InGaAs during an O{sub 3} based ZrO{sub 2} deposition process, but it does provide passivation against As-As development during subsequent TiN deposition. The role of chemical defects in the C-V characteristics is also discussed.

36 MATERIALS SCIENCE↗

Intermixing at the absorber-buffer layer interface in thin-film solar cells: The electronic effects of point defects in Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4} devices

We investigate point defects in the buffer layers CdS and ZnS that may arise from intermixing with Cu(In,Ga)(S,Se){sub 2} (CIGS) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTS) absorber layers in thin-film photovoltaics. Using hybrid functional calculations, we characterize the electrical and optical behavior of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities in the buffer. We find that In and Ga substituted on the cation site act as shallow donors in CdS and tend to enhance the prevailing n-type conductivity at the interface facilitated by Cd incorporation in CIGS, whereas they are deep donors in ZnS and will be less effective dopants. Substitutional In and Ga can favorably form complexes with cation vacancies (A-centers) which may contribute to the “red kink” effect observed in some CIGS-based devices. For CZTS absorbers, we find that Zn and Sn defects substituting on the buffer cation site are electrically inactive in n-type buffers and will not supplement the donor doping at the interface as in CIGS/CdS or ZnS devices. Sn may also preferentially incorporate on the S site as a deep acceptor in n-type ZnS, which suggests possible concerns with absorber-related interfacial compensation in CZTS devices with ZnS-derived buffers. Cu, Na, and K impurities are found to all have the same qualitative behavior, most favorably acting as compensating acceptors when substituting on the cation site. Our results suggest one beneficial role of K and Na incorporation in CIGS or CZTS devices is the partial passivation of vacancy-related centers in CdS and ZnS buffers, rendering them less effective interfacial hole traps and recombination centers.

36 MATERIALS SCIENCE↗

Charge separation at nanoscale interfaces: Energy-level alignment including two-quasiparticle interactions

The universal and fundamental criteria for charge separation at interfaces involving nanoscale materials are investigated. In addition to the single-quasiparticle excitation, all the two-quasiparticle effects including exciton binding, Coulomb stabilization, and exciton transfer are considered, which play critical roles on nanoscale interfaces for optoelectronic applications. We propose a scheme allowing adding these two-quasiparticle interactions on top of the single-quasiparticle energy level alignment for determining and illuminating charge separation at nanoscale interfaces. Employing the many-body perturbation theory based on Green's functions, we quantitatively demonstrate that neglecting or simplifying these crucial two-quasiparticle interactions using less accurate methods is likely to predict qualitatively incorrect charge separation behaviors at nanoscale interfaces where quantum confinement dominates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ternary superlattice boosting interface-stabilized magnetic chirality

In cobalt-nickel multilayers grown on iridium surfaces, magnetic homo-chirality can be stabilized by Dzyaloshinskii-Moriya interactions (DMI) at the interface with the substrate. When thickness of the multilayers is increased beyond threshold values, then non-chiral bulk properties exceed interface contributions and this type of chirality vanishes. Here, we use spin-polarized low energy electron microscopy to measure these thickness thresholds, and we determine estimates of the strength of the DMI from the measurements. Even though the same 5d heavy metal is used as a substrate, a remarkably large variation is found between the two 3d magnets: our results indicate that the strength of the DMI at Co/Ir interfaces is three times larger than at Ni/Ir interfaces. We show how this finding provides ways to extend interfacial-DMI stabilization of domain wall chirality to 3d/5d/3d ternary multilayers such as [Ni/Ir/Co]{sub n}. Such strategies may extend chirality-control to larger film thickness and a wider range of substrates, which may be useful for designing new spintronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanisms of nonequilibrium electron-phonon coupling and thermal conductance at interfaces

We study the electron and phonon thermal coupling mechanisms at interfaces between gold films with and without Ti adhesion layers on various substrates via pump-probe time-domain thermoreflectance. The coupling between the electronic and the vibrational states is increased by more than a factor of five with the inclusion of an ∼3 nm Ti adhesion layer between the Au film and the non-metal substrate. Furthermore, we show an increase in the rate of relaxation of the electron system with increasing electron and lattice temperatures induced by the laser power and attribute this to enhanced electron-electron scattering, a transport channel that becomes more pronounced with increased electron temperatures. The inclusion of the Ti layer also results in a linear dependence of the electron-phonon relaxation rate with temperature, which we attribute to the coupling of electrons at and near the Ti/substrate interface. This enhanced electron-phonon coupling due to electron-interface scattering is shown to have negligible influence on the Kapitza conductances between the Au/Ti and the substrates at longer time scales when the electrons and phonons in the metal have equilibrated. These results suggest that only during highly nonequilibrium conditions between the electrons and phonons (T{sub e} ≫ T{sub p}) does electron-phonon scattering at an interface contribute to thermal boundary conductance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thickness dependence of La 0.7 Sr 0.3 MnO 3 /PbZr 0.2 Ti 0.8 O 3 magnetoelectric interfaces

Magnetoelectric materials have great potential to revolutionize electronic devices due to the coupling of their electric and magnetic properties. Thickness varying La 0.7 Sr 0.3 MnO 3 (LSMO)/PbZr 0.2 Ti 0.8 O 3 (PZT) heterostructures were built and measured in this article by valence sensitive x-ray absorption spectroscopy. The sizing effects of the heterostructures on the LSMO/PZT magnetoelectric interfaces were investigated through the behavior of Mn valence, a property associated with the LSMO magnetization. Here, we found that Mn valence increases with both LSMO and PZT thickness. Piezoresponse force microscopy revealed a transition from monodomain to polydomain structure along the PZT thickness gradient. The ferroelectric surface charge may change with domain structure and its effects on Mn valence were simulated using a two-orbital double-exchange model. The screening of ferroelectric surface charge increases the electron charges in the interface region, and greatly changes the interfacial Mn valence, which likely plays a leading role in the interfacial magnetoelectric coupling. The LSMO thickness dependence was examined through the combination of two detection modes with drastically different attenuation depths. The different length scales of these techniques' sensitivity to the atomic valence were used to estimate the depth dependence Mn valence. Finally, a smaller interfacial Mn valence than the bulk was found by globally fitting the experimental results.

36 MATERIALS SCIENCE↗

Cr/B{sub 4}C multilayer mirrors: Study of interfaces and X-ray reflectance

We present an experimental study of the effect of layer interfaces on the x-ray reflectance in Cr/B{sub 4}C multilayer interference coatings with layer thicknesses ranging from 0.7 nm to 5.4 nm. The multilayers were deposited by magnetron sputtering and by ion beam sputtering. Grazing incidence x-ray reflectometry, soft x-ray reflectometry, and transmission electron microscopy reveal asymmetric multilayer structures with a larger B{sub 4}C-on-Cr interface, which we modeled with a 1–1.5 nm thick interfacial layer. Reflectance measurements in the vicinity of the Cr L{sub 2,3} absorption edge demonstrate fine structure that is not predicted by simulations using the currently tabulated refractive index (optical constants) values for Cr.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The energy level alignment at metal–molecule interfaces using Wannier–Koopmans method

We apply a recently developed Wannier-Koopmans method (WKM), based on density functional theory (DFT), to calculate the electronic energy level alignment at an interface between a molecule and metal substrate. We consider two systems: benzenediamine on Au (111), and a bipyridine-Au molecular junction. The WKM calculated level alignment agrees well with the experimental measurements where available, as well as previous GW and DFT + Σ results. These results suggest that the WKM is a general approach that can be used to correct DFT eigenvalue errors, not only in bulk semiconductors and isolated molecules, but also in hybrid interfaces.

36 MATERIALS SCIENCE↗

Effect of intermixing at CdS/CdTe interface on defect properties

We investigated the stability and electronic properties of defects in CdTe{sub 1−x}S{sub x} that can be formed at the CdS/CdTe interface. As the anions mix at the interface, the defect properties are significantly affected, especially those defects centered at cation sites like Cd vacancy, V{sub Cd}, and Te on Cd antisite, Te{sub Cd}, because the environment surrounding the defect sites can have different configurations. We show that at a given composition, the transition energy levels of V{sub Cd} and Te{sub Cd} become close to the valence band maximum when the defect has more S atoms in their local environment, thus improving the device performance. Such beneficial role is also found at the grain boundaries when the Te atom is replaced by S in the Te-Te wrong bonds, reducing the energy of the grain boundary level. On the other hand, the transition levels with respect to the valence band edge of CdTe{sub 1−x}S{sub x} increases with the S concentration as the valence band edge decreases with the S concentration, resulting in the reduced p-type doping efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular-level origin of the carboxylate head group response to divalent metal ion complexation at the air-water interface

We exploit gas-phase cluster ion techniques to provide insight into the local interactions underlying divalent metal ion-driven changes in the spectra of carboxylic acids at the air-water interface. This information is used to clarify the experimental findings of surface sensitive spectroscopies that the CO stretching bands of long chain acids appear at very similar energies when the head group is deprotonated by high sub-phase pH or is exposed to relatively high concentrations of Ca2+ divalent metal ions (e.g., Ca2+ and Mg2+). To this end, we report the evolution of the vibrational spectra of size-selected [Ca2+·RCO2¯]+·(H2O)n=0-14 and RCO2¯·(H2O)n=0-14 cluster ions obtained using infrared photofragmentation mass spectrometry toward the features observed at the air-water interface. The carboxylate with R = -CD2CD3 was chosen in order to capture the longer chain behavior and to suppress band congestion that complicates the spectra of the light isotopologue. Surprisingly, not only does stepwise hydration of the RCO2¯ anion and the [Ca2+·RCO2¯]+ contact ion pair yield solvatochromic responses in opposite directions, but in both cases the responses of the two CO bands (?_s^COO and ?_as^COO) to hydration are opposite to each other! The result is that the two CO bands evolve toward their interfacial and bulk asymptotes from opposite directions. Theoretical simulations of the [Ca2+·RCO2¯]+·(H2O)n clusters indicate that the metal ion remains directly bound to the head group in a contact ion pair motif as the asymmetric CO stretch converges at the bulk value by n = 12, establishing that direct metal complexation can account for the interfacial and bulk behavior. We discuss these effects in the context of a qualitative model that invokes the water network-dependent local electric field along the C-C bond connecting the head group to the tail as the key parameter driving the observed trends. M.A.J. and H.C.A. thank the National Science Foundation through the NSF Center for Aerosol Impacts on Chemistry of the Environment (NSF-CAICE), CHE-1305427 for supporting this work. M.A.J. thanks the Air Force Office of Scientific Research for the cryogenic spectrometer used in the gas phase experiments. K.D.J. thanks the Department of Energy under grant no. DE-FG02-00ER15066. C.J. Mundy and S.M. Kathmann are supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. M.D. Baer was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Biomolecular Materials Program at PNNL. PNNL is operated by Battelle Memorial Institute for the U.S. Department of Energy under Contract No. DE-AC05- 76RL01830. Computing resources for the calculation of harmonic spectra were allocated by PNNL’s Institutional Computing program.

Denton, Joanna↗

Activation Energies for Oxide- and Interface-Trap Charge Generation Due to Negative-Bias Temperature Stress of Si-Capped SiGe-pMOSFETs

We investigate negative-bias temperature instabilities in SiGe pMOSFETs with SiO 2 /HfO 2 gate dielectrics. The measured activation energies for interface-trap charge buildup during negative-bias temperature stress are lower for SiGe channel pMOSFETs with SiO 2 /HfO 2 gate dielectrics and Si capping layers than for conventional Si channel pMOSFETs with SiO 2 gate dielectrics. Electron energy loss spectroscopy and scanning transmission electron microscopy images demonstrate that Ge atoms can diffuse from the SiGe layer into the Si capping layer, which is adjacent to the SiO 2 /HfO 2 gate dielectric. Density functional calculations show that these Ge atoms reduce the strength of nearby Si-H bonds and that Ge-H bond energies are still lower, thereby reducing the activation energy for interface-trap generation for the SiGe devices. Activation energies for oxide-trap charge buildup during negative-bias temperature stress are similarly small for SiGe pMOSFETs with SiO 2 /HfO 2 gate dielectrics and Si pMOSFETs with SiO 2 gate dielectrics, suggesting that, in both cases, the oxide-trap charge buildup likely is rate-limited by hole tunneling into the near-interfacial SiO 2 .

activation energy↗

DRILL Interface Makes Ion Soft Landing Broadly Accessible for Energy Science and Applications

Polyoxometalates (POM) have been deposited onto carbon nanotube (CNT) electrodes using benchtop ion soft landing (SL) enabled by a vortex-confined electrohydrodynamic desolvation process. The device is based on the dry ion localization and locomotion (DRILL) mass spectrometry interface of Fedorov and co-workers. By adding electrospray emitters, heating the desolvation gas, and operating at high gas flow rates, it is possible to obtain stable ion currents up to -15 nA that are ideal for deposition. Coupled with ambient ion optics, this interface enables desolvated ions to be delivered to surfaces while excluding solvent and counterions. Electron microscopy of surfaces prepared using the device reveal discrete POM and no aggregation that degrades electrode performance. Characterization of POM-coated CNT electrodes in a supercapacitor showed an energy storage capacity similar to that achieved with SL in vacuum. For solutions that produce primarily a single ion by electrospray ionization, benchtop SL offers a simpler and less costly approach for surface modification with applications in catalysis, energy storage, and beyond.

Johnson, Grant E.↗