Search NASA⌕ Search

SEARCH · Search NASA

Results for “ION BEAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Heavy ion beam probe for Wendelstein 7-X measurement capabilities as projected through its design

A heavy ion beam probe (HIBP) diagnostic is being developed for studies of plasma equilibrium and turbulence in the optimized Wendelstein 7-X (W7-X) stellarator. Operation of W7-X has experimentally demonstrated that its optimized magnetic field results in improved neoclassical particle confinement and, as a result, turbulence is the predominant cause of energy transport. The HIBP will have the unique ability to provide experimental data needed to complement models of both neoclassical and turbulent transport. It will acquire direct measurements in the W7-X plasma interior of the electric potential (needed for understanding ambipolar particle flux) and fluctuations of electron density and potential (needed for understanding turbulence). The HIBP for W7-X will inject singly charged ion beams with energies of up to 2 MeV and is designed to access the upper cross section of the W7-X plasma. We use trajectory simulations to illustrate the plasma coverage that the diagnostic can achieve in the reference magnetic configurations of W7-X. We calculate beam signal levels, discuss anticipated measurement sensitivity of broadband fluctuations of electron density and plasma potential, and show how they depend on plasma density. We also discuss the diagnostic sensitivity to equilibrium plasma potential.

Instruments & Instrumentation↗
DOE OSTI2025

Charge-exchange losses of beam ions in MAST Upgrade: experiments and modelling

Dedicated experiments were performed on MAST Upgrade to study beam-ion losses caused by charge exchange (CX) with edge neutrals. The fuelling was switched from the high-field side to the low-field side mid-discharge. Direct measurements suggest a strong increase in the neutral density around the plasma and a decrease in the beam-ion density, which is qualitatively explained by CX losses. Measurements by a resistive bolometer have suggested particle bombardment during neutral beam injection, providing a unique opportunity to separate CX from other loss mechanisms. To verify and quantify CX losses, the orbit-following code ASCOT, which accounts both for CX neutralization and reionization, was used to simulate beam-particle power loads on the bolometer. Simulations reproduce measured bolometer power loads during high-field-side fuelling, verifying CX losses of approximately 10% of the off-axis beam power. Toroidally symmetric simulations overestimate power loads on the bolometer during low-field-side fuelling, which is explained by toroidal asymmetry in the neutral density distribution, as is demonstrated by toroidally asymmetric simulations. Results suggest significantly higher CX losses during low-field-side fuelling, up to about 50% of off-axis beam power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1981

Ion beam deposited protective films

Single or dual ion beam sources were used to deposit thin films for different applications. Metal and metal oxide films were evaluated as protective coatings for the materials. Film adherence was measured and the most promising films were then tested under environments similar to operating conditions. It was shown that some materials do protect die material (H-13 steel) and do reduce thermal fatigue. Diamondlike films have many useful applications. A series of experiments were conducted to define and optimize new approaches to the manufacture of such films. A dual beam system using argon and methane gases was developed to generate these films.

Mirtich, M. J.↗
NASA NTRS1984

Generation of broadband electrostatic noise by ion beam instabilities in the magnetotail

Particle data from ISEE 1 sampled in the earth's magnetotail show the presence of energetic ion beams in the boundary layer of the plasma sheet. A theory of instabilities driven by the beams is developed and compared with wave data sampled simultaneously to the particle data. It is concluded that the ion beams generate broadband electrostatic bursts of noise. The electrostatic noise correlates well with the occurrence of the beams, and the spectrum is consistent with that predicted from a negative energy beam instability under magnetotail conditions. The theory predicts that a spectrum of growing waves can be driven for frequencies from 0.001 omega(pe) up to omega(pe), the electron plasma frequency, with a spectral peak typically near 0.01 omega(pe) or lower, in agreement with the wave data. Furthermore, as one moves away from the source region perpendicular to the magnetic field, the high frequency components of the observed wave spectra are predicted to disappear gradually, leaving the low frequency part of the spectrum, also as is observed. Evidence is given for significant pitch angle scattering of the beams by the broadband electrostatic noise, leading to more isotropic ion distributions.

Grabbe, C. L.↗
NASA NTRS1990

Ion beam heating in the auroral zone

Recent satellite observations at high altitudes (above 5000 km) in the auroral zone have shown the existence of hybrid or bimodal ion beam distributions that are evidence of both parallel and perpendicular ion acceleration. To study the nonlinear effects of the ion-ion instability in terms of plasma heating, a numerical simulation parametric study has been performed. It was found that the parallel acceleration that forms the ion beams occurs on a time scale faster than ion-ion wave growth at low drifts; thus ion-ion wave growth is expected to occur primarily for higher drift speeds, which results in strong oblique heating of the ions (both hydrogen and oxygen) forming elevated ion conics.

Schriver, David↗
NASA NTRS1988

Observations of the plasma environment during an active ionospheric ion beam

This paper presents detailed data on positive ion flux observations acquired during an active rocket-borne ion beam injection experiment, using the hemispheric electrostatic energy and pitch angle spectrometer (HEEPS) which was separated from the beam-emitting payload by distances along and across geomagnetic field lines which varied systematically during the experiment. The data obtained by the HEEPS illustrate a number of outstanding features of the ion flux environment near the HEEPS instrument during beam operations, some of which are not understood. It is shown that particle, field, and photometric data support a picture of particularly intense beam-plasma interactions in the immediate vicinity of the beam-emitting payload.

Pollock, C. J.↗
NASA NTRS1977

Effect of surface texture by ion beam sputtering on implant biocompatibility and soft tissue attachment

The objectives in this report were to use the ion beam sputtering technique to produce surface textures on polymers, metals, and ceramics. The morphology of the texture was altered by varying both the width and depth of the square pits which were formed by ion beam erosion. The width of the ribs separating the pits were defined by the mask used to produce the texture. The area of the surface containing pits varies as the width was changed. The biological parameters used to evaluate the biological response to the texture were: (1) fibrous capsule and inflammatory response in subcutaneous soft tissue; (2) strength of the mechanical attachment of the textured surface by the soft tissue; and (3) morphology of the epidermal layer interfacing the textured surface of percutaneous connectors. Because the sputter yield on teflon ribs was approximately an order of magnitude larger than any other material the majority of the measurements presented in the report were obtained with teflon.

Gibbons, D. F.↗
NASA NTRS1979

Ion-beam-textured graphite

Results of evaluation of seven different materials (copper, tantalum, titanium carbide, soot, smooth pyrolytic graphite, and ion-beam-textured graphite) for low secondary-electron emitting surface for depressed collects in microwave amplifiers indicate that ion-beam-textured graphite shows greatest potential for use.

Curren, A. N.↗
NASA NTRS1984

Ion-beam nitriding of steels

The application of the ion beam technique to the nitriding of steels is described. It is indicated that the technique can be successfully applied to nitriding. Some of the structural changes obtained by this technique are similar to those obtained by ion nitriding. The main difference is the absence of the iron nitride diffraction lines. It is found that the dependence of the resultant microhardness on beam voltage for super nitralloy is different from that of 304 stainless steel.

Salik, J.↗
NASA NTRS1985

Ion-beam nitriding of steels

The application of the ion beam technique to the nitriding of steels is described. It is indicated that the technique can be successfully applied to nitriding. Some of the structural changes obtained by this technique are similar to those obtained by ion nitriding. The main difference is the absence of the iron nitride diffraction lines. It is found that the dependence of the resultant microhardness on beam voltage for super nitralloy is different from that of 304 stainless steel.

Salik, J.↗
NASA NTRS1994

Atomic Oxygen (ATOX) simulation of Teflon FEP and Kapton H surfaces using a high intensity, low energy, mass selected, ion beam facility

A high intensity (greater than 10(exp 15) ions/sq cm) low energy (down to 5 eV) mass selected ion beam (MSIB) facility was used to study the effects of ATOX on two polymers commonly used for space applications (Kapton H and Teflon FEP). The polymers were exposed to O(+) and Ne(+) fluences on 10(exp 15) - 10(exp 19) ions/sq cm, using 30eV ions. A variety of analytical methods were used to analyze the eroded surfaces including: (1) atomic force microscopy (AFM) for morphology measurements; (2) total mass loss measurements using a microbalance; (3) surface chemical composition using x-ray photoelectron spectroscopy (XPS), and (4) residual gas analysis (RGA) of the released gases during bombardment. The relative significance of the collisional and chemical degradation processes was evaluated by comparing the effects of Ne(+) and O(+) bombardment. For 30 eV ions it was found that the Kapton is eroded via chemical mechanisms while Teflon FEP is eroded via collisional mechanisms. AFM analysis was found very powerful in revealing the evolution of the damage from its initial atomic scale (roughness of approx. 1 nm) to its final microscopic scale (roughness greater than 1 micron). Both the surface morphology and the average roughness of the bombarded surfaces (averaged over 1 micron x 1 micron images by the system's computer) were determined for each sample. For 30 eV a non linear increase of the Kapton roughness with the O(+) fluence was discovered (a slow increase rate for fluences phi less than 5 x 10(exp 17) O(+)/sq cm, and a rapid increase rate for phi greater than 5 x 10(exp 17) O(+)/sq cm). Comparative studies on the same materials exposed to RF and DC oxygen plasmas indicate that the specific details of the erosion depend on the simulation facility emphasizing the advantages of the ion beam facility.

Vered, R.↗
NASA NTRS1990

Heating of the polar wind due to ion beam instabilities

Recent DE 1 observations (Chen et al., 1990) in the polar cap region have detected upflowing field-aligned O(+) and H(+) beams of about 10 eV energy; it was suggested that these beams may interact with the polar wind and provide free energy to the polar wind which will alter its 'classical' description. This paper investigates both the linear and the nonlinear effects of upflowing O(+) and H(+) ion beams on an O(+) and H(+) polar wind by applying isotropic Maxwellian distributions for modeling the O(+) and H(+) polar-wind ions and using drifting Maxwellian distributions for the electrons, O(+), and H(+) beam ions. It is shown that, in the presence of O(+) and H(+) beams, the slow ion acoustic and slow ion cyclotron modes can couple to the normal modes of the plasma and be driven unstable. The O(+) ions are preferentially heated over the H(+) ions; this preferential heating couses enhanced outflow of O(+) ions along polar cap field lines by effectively increasing the O(+) scale height.

Chen, Margaret W.↗
NASA NTRS1989

DBR laser with nondynamic plasma grating formed by focused ion beam implanted dopants

A static plasma grating has been demonstrated experimentally (Wu et al., 1988) in a large-optical-cavity focused-ion-beam-distributed-Bragg-reflector (FIB-DBR) GaAlAs/GaAs laser diode. The grating is formed by implanting stripes of dopants with a focused ion beam. The dopants ionize to form periodic fluctuations in the carrier concentration which, through the Kramers-Kronig relations, form an index grating. A model of the grating strength for optimizaton of the laser design is developed and presented. The computed results show that the coupling coefficient k can be increased by more than an order of magnitude over the 15/cm experimentally. Therefore, FIB-DBR or FIB-distributed-feedback (DFB) lasers with performance comparable to that of conventional DBR (or DFB) lasers can be expected.

Boenke, Myra M.↗
NASA NTRS1993

MeV ion-beam analysis of optical data storage films

Our objectives are threefold: (1) to accurately characterize optical data storage films by MeV ion-beam analysis (IBA) for ODSC collaborators; (2) to develop new and/or improved analysis techniques; and (3) to expand the capabilities of the IBA facility itself. Using H-1(+), He-4(+), and N-15(++) ion beams in the 1.5 MeV to 10 MeV energy range from a 5.5 MV Van de Graaff accelerator, film thickness (in atoms/sq cm), stoichiometry, impurity concentration profiles, and crystalline structure were determined by Rutherford backscattering (RBS), high-energy backscattering, channeling, nuclear reaction analysis (NRA) and proton induced X-ray emission (PIXE). Most of these techniques are discussed in detail in the ODSC Annual Report (February 17, 1987), p. 74. The PIXE technique is briefly discussed in the ODSC Annual Report (March 15, 1991), p. 23.

Leavitt, J. A.↗
NASA NTRS1978

Adaptation of ion beam technology to microfabrication of solid state devices and transducers

A number of areas were investigated to determine the potential uses of ion beam techniques in the construction of solid state devices and transducers and the packaging of implantable electronics for biomedical applications. The five areas investigated during the past year were: (1) diode-like devices fabricated on textured silicon; (2) a photolithographic technique for patterning ion beam sputtered PVC (polyvinyl chloride); (3) use of sputtered Teflon as a protective coating for implantable pressure sensors; (4) the sputtering of Macor to seal implantable hybrid circuits; and (5) the use of sputtered Teflon to immobilize enzymes.

Topich, J. A.↗
NASA NTRS1986

A study of target heating in low-energy ion-beam processing

A bonded thermocouple approach is employed to accurately determine semiconductor surface heating profiles as a function of energy, position, and gas species in a high-current low-energy ion beam etching system. The total beam current is kept at 200 mA and the extractor voltage at 300 V. It is found that the ionic species, the radial position in the ion beam, and the kinetic energy of the ions, all of which effect the ion current density, must be taken into account in recording the temperature rise of the bombarded surface. It is also noted that the occurrence of this temperature rise is dependent on the thermal contacts and heat sinking.

Ringel, S. A.↗
NASA NTRS1985

Electrostatic ion cyclotron waves in a plasma with an ion beam and counterstreaming bulk electrons - Waves in the zero-frequency band

A common feature of the auroral plasma in the region above field-aligned (parallel) potential drops are electrostatic hydrogen cyclotron (EHC) waves. The present paper has the objective to show that wave excitation in the zero-frequency band can occur when the ion beams and the current-carrying bulk electrons counterstream. The instability mechanism involves the Landau interaction of the slow (negative energy) ion-beam-cyclotron waves with the drifting electrons and also with the target (background) ions. Only the latter resonant interaction between the beam and the target ions was considered by Okuda and Nishikawa (1984). In this study, it is shown that an electron drift makes an additional unstable contribution to the waves in the zero-frequency band, including those discussed by Okuda and Nishikawa.

Singh, N.↗