Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface Reconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Impacts of Solvent Washing on the Electrochemical Remediation of Commercial End-of-Life Cathodes

Changes to surface structure and chemistry occurring throughout the functional lifetime of lithium-ion batteries (LIBs) may impact the effectiveness of end-of-life rejuvenation methods. Solvent washing prior to electrochemical relithiation is shown to both increase relithiation efficacy and beneficially alter the interfacial chemistry of heavily degraded industrial cathode material. Four common solvents (acetone, diethyl carbonate, isopropyl alcohol, propylene carbonate) are employed to investigate the role of varying physicochemical solvent properties on the mechanism of capacity recovery. Electrochemical (dQ/dV, EIS), structural (XRD), and chemical (SPME-GC-MS) analysis techniques are employed to comprehensively analyze solvent-cathode interactions. Highly nucleophilic solvents (acetone, DEC) are found to reduce cathode charge-transfer impedance and enable stable impedance growth throughout subsequent cycling. The use of nucleophilic solvents under mechanically aggressive washing conditions may also enable the reintroduction of bulk lattice oxygen, thereby restoring anionic redox capacity. Further, the four solvents are found to selectively remove a subset of surface species from the aged cathode material, including residual electrolyte, additives, and electrolyte-additive reaction products, which are qualitatively analyzed. Surface species removal by each solvent is correlated with the electrochemical performance of the correspondingly washed cathode, highlighting the importance of an optimized washing protocol to effective remediation in the context of direct LIB recycling. For the material under study, the use of a simple acetone washing protocol prior to electrochemical relithiation enables up to 174% capacity recovery relative to unwashed/relithiated black mass.

ADVANCED PROPULSION SYSTEMS↗

Unveiling the influence of selective-area-regrowth interfaces on local electronic properties of GaN p-n junctions for efficient power devices

Here, we report correlated nanoscale mapping of the structure, composition, and properties of regrown GaN p-n junctions to identify how etching and non-planar regrowth processes limit diode performance via the introduction of unintentional dopants and defect states. p-GaN was selectively regrown in n-GaN trenches with SiO 2 masks of variable mask-to-trench-width ratio. Dilute Al layers were periodically introduced during regrowth as markers of the growth interface. Correlated nanoscale mapping of doping, conductivity, and dopant complexes was achieved with atom probe tomography (APT), scanning spreading resistance microscopy (SSRM), and cathodoluminescence (CL) spectroscopy, respectively. The Al marker layers, detected by APT, enabled reconstruction of the faceted growth interface and correlation of the dopant concentration with position and time. The p-GaN growth rate is proportional to the mask-to-trench width ratio while the dopant incorporation rate is invariant. At trench edges, magnesium incorporation is suppressed, and oxygen incorporation enhanced, due to preferential incorporation on the semi-polar growth surface, leading to compensation and less abrupt p-n junctions; the SiO 2 mask is a source of oxygen. Residual etch damage below the regrowth interface induces n-type and p-type conductivity, creating leakage pathways. The non-uniform Mg incorporation is driven by crystal anisotropy and is thus inherent to non-planar regrowth, but can be mitigated by engineering the regrowth interface and process parameters. The unprecedented integration of spatially resolved mapping of dopants, impurities, conductivity, and carrier type is a powerful approach to discriminating distinct factors that limit the performance of regrown diodes, enabling the rational optimization of process and device design.

36 MATERIALS SCIENCE↗

Prostate brachytherapy postimplant dosimetry: Automatic plan reconstruction of stranded implants

Purpose: Plan reconstruction for permanent implant prostate brachytherapy is the process of determining the correspondence between planned and implanted seeds in postimplant analysis. Plan reconstruction informs many areas of brachytherapy quality assurance, including the verification of seed segmentation, misplacement and migration assessment, implant simulations, and the dosimetry of mixed-activity or mixed-species implants. Methods: An algorithm has been developed for stranded implants which uses the interseed spacing constraints imposed by the suture to improve the accuracy of reconstruction. Seventy randomly selected clinical cases with a mean of 23.6 (range 18-30) needles and mean density of 2.0 (range 1.6-2.6) 2.0 (range 1.6-2.6) seeds/cm{sup 3} were automatically reconstructed and the accuracy compared to manual reconstructions performed using a custom 3D graphical interface. Results: Using the automatic algorithm, the mean accuracy of the assignment relative to manual reconstruction was found to be 97.7{+-}0.5%. Fifty-two of the 70 cases (74%) were error-free; of seeds in the remaining cases, 96.7{+-}0.3% were found to be attributed to the correct strand and 97.0{+-}0.3% were correctly connected to their neighbors. Any necessary manual correction using the interface is usually straightforward. For the clinical data set tested, neither the number of seeds or needles, average density, nor the presence of clusters was found to have an effect on reconstruction accuracy using this method. Conclusions: Routine plan reconstruction of stranded implants can be performed with a high degree of accuracy to support postimplant dosimetry and quality analyses.

60 APPLIED LIFE SCIENCES↗

Requirements Document for Development of a Livermore Tomography Tools Interface

In this document, we outline an exercise performed at LLNL to evaluate the user interface deficits of a LLNL-developed CT reconstruction software package, Livermore Tomography Tools (LTT). We observe that a difficult-to-use command line interface and the lack of support functions compound to generate a bottleneck in the CT reconstruction process when input parameters to key functions are not well known. Through the exercise of systems engineering best practices, we generate key performance parameters for a LTT interface refresh, and specify a combination of back-end (“test-mode” functions) and front-end (graphical user interface visualization and command scripting tools) solutions to LTT’s poor user interface that aim to mitigate issues and lower costs associated with CT reconstruction using LTT. Key functional and non-functional requirements and risk mitigation strategies for the solution are outlined and discussed.

42 ENGINEERING↗

Decoupling Thin Film CdTe Growth from Packaging: Toward Record Specific Power in Low Cost Polycrystalline PV

There are critical material and scientific barriers to producing high efficiency, flexible, lightweight solar cells that maximize specific power in a cost-effective manner. III-V solar cells have produced the highest specific power of any photovoltaic technology due to their extremely high efficiency, however, they are also among the most expensive to produce. This work explores a novel lift-off approach with thin-film solar cells, particularly CdTe, to achieve high specific power at low costs. Thin-film devices can be delaminated from their heavy, glass growth substrates post-growth by exploiting a mismatch in coefficient of thermal expansion between the two. This allows thin-film PV to be decoupled from high temperature growth requirements and repackaged using lightweight materials. In this work we evaluate different materials and approaches for achieving large area delamination of CdTe films from their glass superstrates. It is found that epoxy bonded to a rigid handle provides robust and reproducible delamination at the TCO/CdS interface upon submersion in liquid nitrogen. Following delamination, a transparent front contact is re-deposited and selectively etched to expose the back contact to produce a functioning device. Effects of delamination and contributions to device functionality from CdCl 2 and CdS layers are discussed. Reproducible delamination of high efficiency, thin-film solar cells over large areas will enable work to further improve device efficiency through passivation and reconstruction of the previously buried interface between the transparent contact and CdS.

14 SOLAR ENERGY↗

Study of the film boiling heat transfer and two-phase flow interface behavior using image processing

Here, in this study, based on a small-scale quench test facility, the two-phase flow interface behavior during quench transients is visualized and analyzed utilizing an image processing framework. The high-fidelity experimental results obtained for two-phase flow in the current framework can support various studies both in the time domain and in the frequency domain. In particular, visualization of the data obtained from different heating surfaces under different test conditions are used to perform a full-scale transient 2-D vapor film reconstruction. The liquid-vapor interface variations in various heat transfer regimes as well as at the initial film breakup point can be directly obtained through the processed data. Moreover, the temporal variation of the interfacial wave frequency approaching quench is investigated in detail. Based on the high-resolution data obtained for the liquid-vapor interface, the detailed phase velocity and temperature profiles are obtained through theoretic analysis, based on which the film boiling heat transfer coefficient (HTC) can be determined. In addition, an improved film boiling HTC model is developed considering the effects of wall superheat, liquid subcooling temperature, vapor film thickness as well as fluid properties. The model is found to predict film boiling HTC well within 15% error.

42 ENGINEERING↗

Reconstructing Oxygen-Deficient Zirconia with Ruthenium Catalyst on Atomic-Scale Interfaces toward Hydrogen Production

Downsizing a catalyst nanoparticle (NP) to a single atom (SA) has proven to be highly effective in increasing catalytic activity and decreasing the amount of catalyst required for various electrochemical reactions. However, insufficient stability of the single-atom site catalysts (SACs) is still a significant challenge for their practical application. Here, SACs firmly bound to stable metal oxide NPs are proposed to dramatically increase the electrochemical activity and stability of SA-based catalysts for hydrogen evolution reaction (HER). Starting from a Ru-infiltrated, Zr-based metal-organic framework (MOF), the tetragonal zirconium oxide (ZrO 2-x ) NPs-embedded carbon matrix is fabricated as support through facile pyrolysis. Simultaneously, Ru SAs as active sites are well dispersed on the surface of ZrO 2-x NPs due to the generation of oxygen vacancies in the tetragonal ZrO 2-x . Finally, the Ru-ZrO 2-x SAC exhibits a 4–5 times higher mass activity than commercial Pt and Ru catalysts and superior durability due to strong metal-support interaction (SMSI) between Ru atoms and ZrO 2-x substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of kinetics on the Mn-induced reconstructions of the GaAs(001) surface

A combined scanning tunneling microscopy and low-energy electron diffraction investigation of the Mn/GaAs(001) interface formation is reported. The interface, grown on a (2 x 4) reconstructed substrate produced by molecular beam epitaxy, was studied as a function of Mn evaporation with thickness ranging from 1/8 ML to 1 ML. The interaction of Mn atoms with the semiconductor surface is strong and leads to surface reconstructions involving a rearrangement of the two outmost atomic layers of the substrate. For Mn thickness lower than 1/2 ML, the surface is characterized by a (2 x 1) periodicity. Conversely, when the Mn deposition is increased to 1/2 ML the surface reconstruction is strongly dependent on the preparation procedure. If Mn deposition is performed on the substrate at 390 deg. C, a fully ordered surface characterized by a clear (2 x 2) reconstruction is obtained, whereas, annealing the sample after Mn deposition, gives a disordered surface with a (2 x 1) symmetry. An intermediate phase between (2 x 1) and (2 x 2) is found for Mn depositions in between 1/4 and 1/2 ML. No further structural evolution was observed for both preparation methods above 1/2 ML coverage.

36 MATERIALS SCIENCE↗

Tuning the photovoltaic effect of multiferroic CoFe{sub 2}O{sub 4}/Pb(Zr, Ti)O{sub 3} composite films by magnetic fields

The 0–3 type CoFe{sub 2}O{sub 4}-Pb(Zr,Ti)O{sub 3} (CFO-PZT) multiferroic composite films have been prepared by a sol-gel process and spin-coating technique. A confirmable photovoltaic effect is observed under ultraviolet light irradiation. Moreover, this photovoltaic effect can be tuned by external magnetic fields. The maximum magnetic modulation ratios of short-circuit current density and open-circuit voltage can reach as high as 13.7% and 12.8% upon the application of 6 kOe DC magnetic field. Through remnant polarization measurements under various magnetic fields and detailed analysis of the energy band structures, we elucidate the mechanism of tuning photovoltaic effect by magnetic fields and attribute it to the combination of two factors. One is the decreased ferroelectric-polarization-induced depolarization electric field and another is the band structure reconstruction at CFO-PZT interfaces, both of which are dominated by the magnetoelectric coupling via interfacial stress transferring at nanoscale. This work makes some attempts of coupling photo-induced effects with magnetoelectric effect in multiferroic materials and will widen the practical ranges of multiferroic-based applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental and Theoretical Studies of Liquid-Solid and Liquid-Vapor Interfaces of Metals and Alloys

The research supported by ER46321 was designed to understand in microscopic detail the structures of the interfaces between liquid metals and alloys and solid media. The system chosen for study, because of detailed knowledge of the structure of the corresponding liquid alloy-vapor interface, was the interface between a Si crystal and a dilute alloy of Pb in Ga. Experimental study of the Si:PbGa interface was anticipated to be very difficult; it requires preparation of an interface between a liquid metal and a solid surface that is flat to better than a nanometer on the scale length of the x-ray coherence, alignment of the x-ray beam and the surface in the sub-micro radian regime, and the use of high energy x-rays to penetrate the window and reach the interface without disastrous loss of intensity. The experimental design was subject to compromises forced by the limit to the highest x-ray energy available at the ChemMatCARS beam-line, namely 30 keV, which reduced the scattered signal relative to what can be obtained with higher x-ray energy. Although considerable progress was achieved during the support period and its no-cost extension, the difficulties encountered prevented completion of the studies and the data collected are incomplete. These data hint at the existence of unexpected structural features of the interface, in particular that Pb dimers play an important role in the interfacial structure. These data provide a different picture of the interface from the pentagonal structure inferred to be present in the interface between pure Pb and Si 001 (Nature 408, 839 (2000)), but much like the Ga dimers in the interface between liquid Ga and the 100 face of diamond (Nature 390, 379 (1997), J. Chem. Phys. 123, 104703 (2005)). However, during the latter part of the support period significant progress was made in the theoretical description of the liquid metal-crystal interface. In particular, stimulated by the results of an experimental study of the interface between liquid Hg and the reconstructed (0001) face of sapphire, we developed an extension of the self-consistent quantum Monte Carlo scheme previously used to study the structure of the liquid metal-vapor interface.

36 MATERIALS SCIENCE↗

Decoupling Thin Film CdTe Growth from Packaging: Toward Record Specific Power in Low Cost Polycrystalline PV: Preprint

There are critical material and scientific barriers to producing high efficiency, flexible, lightweight solar cells that maximize specific power in a cost-effective manner. GaAs solar cells produce the highest specific power of any photovoltaic (PV) technology due to their low weight and extremely high efficiency, but they are also among the most expensive to produce. This work explores a novel lift-off approach with thin-film solar cells, particularly CdTe, to achieve high specific power at low costs. Thin-film devices can be delaminated from their heavy, glass growth substrates post-growth by exploiting a mismatch in coefficient of thermal expansion between the two. This allows thin-film PV to be decoupled from high temperature growth requirements and repackaged using lightweight materials. Currently, the most consistent method of achieving complete delamination of CdTe films is to apply a glass handle at the back contact of the device using epoxy and submerge it in liquid nitrogen. By Tthen re-depositing a transparent front contact but be re-deposited and selectively etcheding to expose the back contact to produce, a functioning lifted-off devices have been produced. Effects of delamination and contributions to device functionality from CdCl2 and CdS layers are discussed. Reproducible delamination of high efficiency, thin-film solar cells over large areas will enable work to further improve device efficiency through passivation and reconstruction of the previously buried interface between the transparent contact and CdS.

14 SOLAR ENERGY↗

Inverse transport problem solvers based on regularized and compressive sensing techniques

According to the direct exposure measurements from flash radiographic image, regularized-based method and compressive sensing (CS)-based method for inverse transport equation are presented. The linear absorption coefficients and interface locations of objects are reconstructed directly at the same time. With a large number of measurements, least-square method is utilized to complete the reconstruction. Owing to the ill-posedness of the inverse problems, regularized algorithm is employed. Tikhonov method is applied with an appropriate posterior regularization parameter to get a meaningful solution. However, it's always very costly to obtain enough measurements. With limited measurements, CS sparse reconstruction technique Orthogonal Matching Pursuit (OMP) is applied to obtain the sparse coefficients by solving an optimization problem. This paper constructs and takes the forward projection matrix rather than Gauss matrix as measurement matrix. In the CS-based algorithm, Fourier expansion and wavelet expansion are adopted to convert an underdetermined system to a well-posed system. Simulations and numerical results of regularized method with appropriate regularization parameter and that of CS-based agree well with the reference value, furthermore, both methods avoid amplifying the noise. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Similarities and differences between nickelate and cuprate films grown on a SrTiO 3 substrate

The recent discovery of superconductivity in Sr-doped NdNiO 2 films grown on SrTiO 3 started a novel field within unconventional superconductivity. Therefore, to understand the similarities and differences between nickelate and cuprate layers on the same SrTiO 3 substrate, here based on the density functional theory we have systematically investigated the structural, electronic, and magnetic properties of NdNiO 2 / SrTiO 3 and CaCuO 2 / SrTiO 3 systems. Our results revealed a strong lattice reconstruction in the case of NdNiO 2 / SrTiO 3 , resulting in a polar film, with the surface and interfacial NiO 2 layers presenting opposite displacements. To avoid the “polar catastrophe,” the NiO 2 surface to the vacuum reconstructs as well. However, for CaCuO 2 / SrTiO 3 , the distortions of those same two CuO 2 layers were in the same direction. In addition, we found this distortion to be approximately independent of the studied range of film thickness for the nickelate films. Furthermore, we also observed a two-dimensional electron gas at the interface between NdNiO 2 and SrTiO 3 , caused by the polar discontinuity, in agreement with recent literature. For NdNiO 2 / SrTiO 3 the two-dimensional electron gas extends over several layers, while for CaCuO 2 / SrTiO 3 this electronic rearrangement is very localized at the interface between CaCuO 2 and SrTiO 3 . The electronic reconstruction found at the interface involves a strong occupation of the Ti 3 d x y state. In both cases, there is a significant electronic charge transfer from the surface Ni or Cu layers to the Ti interface layer. The interfacial Ni and Cu layers are hole and electron doped, respectively. By introducing magnetism and electronic correlation, we observed that the d 3 z 2 - r 2 orbital of Ni becomes itinerant while the same orbital for Cu remains doubly occupied, establishing a clear two- vs one-orbital active framework for the description of these systems. Furthermore, we also observed a strong magnetic reconstruction at the NdNiO 2 surface to vacuum layer where magnetism is basically suppressed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emitter Reconstruction for Cleaved CdSexTe1-x Devices with Cu vs. As Doping

CdTe absorbers have had historically low carrier densities of ~10^14 cm-3 due to the self-compensating nature of copper dopants. Recent advances in group-V (e.g., arsenic) doping have increased this to 10^16-10^17 cm-3, but modeling suggests that the front interface and emitter properties become limiting in this case. By cleaving arsenic- and copper-doped CdTe device stacks at the emitter/absorber interface, we gain the ability to reconstruct emitters with known properties, which will not change during subsequent device processing, and directly test the modeling. By doing so, we find a much larger performance drop in arsenic devices; this is attributed to insufficient electron density in the emitter and increased sensitivity to interface changes due to collapsed depletion width. This work can help guide emitter engineering for highly-doped CdTe devices in both the as-grown-superstrate- and cleaved-substrate configurations.

As-doped↗

Coupled numerical approach combining finite volume and lattice Boltzmann methods for multi-scale multi-physicochemical processes

A coupled (hybrid) simulation strategy spatially combining the finite volume method (FVM) and the lattice Boltzmann method (LBM), called CFVLBM, is developed to simulate coupled multi-scale multi-physicochemical processes. In the CFVLBM, computational domain of multi-scale problems is divided into two sub-domains, i.e., an open, free fluid region and a region filled with porous materials. The FVM and LBM are used for these two regions, respectively, with information exchanged at the interface between the two sub-domains. A general reconstruction operator (RO) is proposed to derive the distribution functions in the LBM from the corresponding macro scalar, the governing equation of which obeys the convection–diffusion equation. The CFVLBM and the RO are validated in several typical physicochemical problems and then are applied to simulate complex multi-scale coupled fluid flow, heat transfer, mass transport, and chemical reaction in a wall-coated micro reactor. The maximum ratio of the grid size between the FVM and LBM regions is explored and discussed. -- Highlights: •A coupled simulation strategy for simulating multi-scale phenomena is developed. •Finite volume method and lattice Boltzmann method are coupled. •A reconstruction operator is derived to transfer information at the sub-domains interface. •Coupled multi-scale multiple physicochemical processes in micro reactor are simulated. •Techniques to save computational resources and improve the efficiency are discussed.

97 MATHEMATICS AND COMPUTING↗

PlantSEED enables automated annotation and reconstruction of plant primary metabolism with improved compartmentalization and comparative consistency

Genome-scale metabolic reconstructions help us to understand and engineer metabolism. Next-generation sequencing technologies are delivering genomes and transcriptomes for an ever-widening range of plants. While such omic data can, in principle, be used to compare metabolic reconstructions in different species, organs and environmental conditions, these comparisons require a standardized framework for the reconstruction of metabolic networks from transcript data. We previously introduced PlantSEED as a framework covering primary metabolism for 10 species. We have now expanded PlantSEED to include 39 species and provide tools that enable automated annotation and metabolic reconstruction from transcriptome data. The algorithm for automated annotation in PlantSEED propagates annotations using a set of signature k-mers (short amino acid sequences characteristic of particular proteins) that identify metabolic enzymes with an accuracy of about 97%. PlantSEED reconstructions are built from a curated template that includes consistent compartmentalization for more than 100 primary metabolic subsystems. Together, the annotation and reconstruction algorithms produce reconstructions without gaps and with more accurate compartmentalization than existing resources. These tools are available via the PlantSEED web interface at , which enables users to upload, annotate and reconstruct from private transcript data and simulate metabolic activity under various conditions using flux balance analysis. We demonstrate the ability to compare these metabolic reconstructions with a case study involving growth on several nitrogen sources in roots of four species.

Flux Balance Analysis↗

Engineering exchange bias at the interface of self-polarized ultrathin ferroelectric Ba⁢Ti⁢O 3 and ferromagnetic La 0.67⁢ Sr 0.33 ⁢Mn⁢O 3

We investigate the emergence and optimization of conventional exchange bias (EB) in ultrathin (<10 nm) ferroelectric (FE) Ba⁢Ti⁢O 3 (BTO)/ferromagnetic (FM) La 0.67 ⁢Sr 0.33⁢ Mn⁢O 3 (LSMO) epitaxial bilayers without an antiferromagnetic (AFM) material. The EB originates from the electronic orbital reconstruction at the FE-FM interface due to the ferroelectric polarization. We achieve maximum EB of approximately 42 Oe with single-domain polarization in nine-unit-cell-thick BTO, setting the BTO thickness above the critical threshold for ferroelectricity yet below the thickness of strain relaxation and multidomain breakdown. Furthermore, the LSMO layer needs to be thick enough to sustain both the FM layer and polarization-induced AFM spin configuration at the LSMO/BTO interface, yet as thin as possible to enable the EB loop shift. The temperature, training, field, and thickness dependence of the EB confirm that the LSMO/BTO interface exhibits conventional EB despite its unconventional origin. Using x-ray magnetic circular dichroism, scanning transmission electron microscopy, and density-functional-theory calculations, we confirm that the macroscopic EB effect originates from the interfacial AFM spin configuration in LSMO driven by FE-induced d-orbital modifications in interfacial Mn ions. Thus, we engineer strong interfacial EB coupling in artificial multiferroics without a conventional AFM material by controlling FE polarization, highlighting the potential for advanced spintronic applications.

exchange bias↗

Reconstruction of Thiospinel to Active Sites and Spin Channels for Water Oxidation

Water electrolysis is a promising technique for carbon neutral hydrogen production. A great challenge remains at developing robust and low-cost anode catalysts. Many pre-catalysts are found to undergo surface reconstruction to give high intrinsic activity in the oxygen evolution reaction (OER). The reconstructed oxyhydroxides on the surface are active species and most of them outperform directly synthesized oxyhydroxides. The reason for the high intrinsic activity remains to be explored. Here, a study is reported to showcase the unique reconstruction behaviors of a pre-catalyst, thiospinel CoFe 2 S 4 , and its reconstruction chemistry for a high OER activity. The reconstruction of CoFe 2 S 4 gives a mixture with both Fe–S component and active oxyhydroxide (Co(Fe)O x H y ) because Co is more inclined to reconstruct as oxyhydroxide, while the Fe is more stable in Fe–S component in a major form of Fe 3 S 4 . The interface spin channel is demonstrated in the reconstructed CoFe 2 S 4 , which optimizes the energetics of OER steps on Co(Fe)O x H y species and facilitates the spin sensitive electron transfer to reduce the kinetic barrier of O–O coupling. The advantage is also demonstrated in a membrane electrode assembly (MEA) electrolyzer. Finally, this work introduces the feasibility of engineering the reconstruction chemistry of the precatalyst for high performance and durable MEA electrolyzers.

36 MATERIALS SCIENCE↗