Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interference microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Probing Surface Plasmon Dynamics in Periodic Nanostructures through Ultrafast Electron Microscopy

Surface plasmon polaritons (SPPs) can be manipulated to localize and guide light in subwavelength distances, enabling them to find applications in a wide range of areas, from sensing to quantum computing. Among several methods of SPP excitation, periodic arrays of nano- and microstructures are of particular interest, as they enable engineering SPP properties through structural parameters. Here, in this study, using the photon-induced near-field electron microscopy (PINEM) technique, we investigated the mode formation, coupling, interference, and decay of SPPs in square and hexagonal arrays of circular nanoholes under both visible and near-infrared excitation. Polarization-resolved analysis revealed the key factors governing SPP localization and interference patterns, showing that the periodicity and symmetry of the array primarily determine the SPP interference patterns and their orientation, while pump polarization mainly modulates their intensity. Time-resolved PINEM measurements demonstrated the spatial dependence of the SPP temporal characteristics. In addition, cathodoluminescence (CL) spectroscopy was employed to examine the intrinsic plasmonic characteristics of the structure. Finite difference time domain (FDTD) simulations showed strong agreement with both PINEM and CL measurements on the spatial and spectral behavior of SPPs. Understanding the spatiotemporal dynamics of SPPs on nanostructures beyond the diffraction limit is crucial for optimizing plasmonic structures for advanced photonic and quantum technologies.

Plasmonics↗

Germanium Sulfide Nano-Optics Probed by STEM-Cathodoluminescence Spectroscopy

Nano-optical studies of confined modes in planar waveguides have attracted significant interest as a means to probe exciton-polaritons and other hybrid light-matter quasiparticles in layered semiconductors, such as transition metal dichalcogenides or boron nitride. There is a need to broaden such studies to other materials and to identify alternatives to scanning near-field optical microscopy for exciting and measuring confined waveguide modes. Here, we establish an approach for probing the dispersion of traveling waveguide modes by cathodoluminescence spectroscopy excited by the focused electron beam in scanning transmission electron microscopy (STEM-CL) and apply it to solid-state resonators consisting of mesoscale monocrystalline prisms and plates composed of GeS, an anisotropic layered semiconductor with direct bandgap in the near-infrared spectral range. Structure, crystallography, and chemical composition of the mesostructures are analyzed by analytical electron microscopy. STEM-CL maps and spectra show pronounced interference effects and sharp emission peaks at photon energies below the fundamental bandgap of GeS. Our analysis demonstrates that locally excited light emission in STEM-CL launches in-plane waveguide modes in the mesoscale GeS structures, which are internally reflected by highly specular GeS edges to cause interference of the waveguide modes. Reabsorption and secondary luminescence give rise to the intensity modulations detected in the far field. In conclusion, our results highlight avenues for probing light-matter interactions below the diffraction limit in a wide range of quantum materials and open up the possibility of tuning light emission geometrically using interference rather than by the conventional bandgap engineering.

36 MATERIALS SCIENCE↗

Morphological and electrical properties of epoxy-based composites reinforced with exfoliated graphite

An experimental study has been carried out to prepare and characterize epoxy/amine-based composites filled with different percentages of partially exfoliated graphite (i.e. pEG) particles having an exfoliation degree of 56% in order to analyze the effect of the filler amounts on the electrical properties of the resulting nanocomposites. Moreover, in order to fully investigate the direct relationship between the physical properties of the employed filler and the results of the electrical characterization, a structural and morphological characterization of the pEG samples is carried out by means of various type of analysis such as X-ray diffraction patterns, micro-Raman and Scanning Electron Microscopy (SEM) images. The DC electrical characterization reveals a percolation thresholds (EPT) that falls in the range [2–3] wt% and an electrical conductivity of about 0.66 S/m at the highest filler loading (6.5 wt%). From the analysis of the percolative curve it is possible to derive the percolation law parameters and in particular the critical exponent t, whose value (i.e. 1.2) reflects an effective 2D organization of the percolating structure consistent with the type of filler used (2-dimensional). Finally, an extensive analysis concerning the electrical properties in the frequency domain has been carried out in order to evaluate the effectiveness of pEG-loaded composites in terms of electromagnetic interference compatibility (EMC) and their applicability as radar absorbers materials (RAMs).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

GaN directional couplers for integrated quantum photonics

Large cross-section GaN waveguides are proposed as a suitable architecture to achieve integrated quantum photonic circuits. Directional couplers with this geometry have been designed with aid of the beam propagation method and fabricated using inductively coupled plasma etching. Scanning electron microscopy inspection shows high quality facets for end coupling and a well defined gap between rib pairs in the coupling region. Optical characterization at 800 nm shows single-mode operation and coupling-length-dependent splitting ratios. Two photon interference of degenerate photon pairs has been observed in the directional coupler by measurement of the Hong-Ou-Mandel dip [C. K. Hong, et al., Phys. Rev. Lett. 59, 2044 (1987)] with 96% visibility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of silica and gold nanoparticles on macrophage proliferation, activation markers, cytokine production, and phagocytosis in vitro

The accumulation of durable nanoparticles (NPs) in macrophages following systemic administration is well described. The ultimate biological impact of this accumulation on macrophage function, however, is not fully understood. In this study, nontoxic doses of two durable NPs, SiO2 and Au, at particle sizes of ~10 nm and 300 nm were used to evaluate the effect of bioaccumulation on macrophage function in vitro using RAW 264.7 mouse macrophage-like cells as a model system. Cell proliferation, cell cycle, cytokine production, surface marker activation, and phagocytosis responses were evaluated through a panel of assays using flow cytometry and confocal microscopy. The most dramatic change in RAW 264.7 cell function was a reduction in phagocytosis as monitored by the uptake of Escherichia coli. Cells exposed to both 10 nm Au NPs and 10 nm SiO2 NPs showed ~50% decrease in phagocytosis, while the larger NPs caused a less dramatic reduction. In addition to modifying phagocytosis profiles, 10 nm SiO2 NPs caused changes in proliferation, cell cycle, and cell morphology. Au NPs had no effect on cell cycle, cytokine production, or surface markers and caused interference in phagocytosis in the form of quenching when the assay was performed via flow cytometry. Confocal microscopy analysis was used to minimize this interference and demonstrated that both sizes of Au NPs decreased the phagocytosis of E. coli. Overall, our results demonstrate that Au and SiO2 NP uptake by macrophages can influence macrophage phagocytosis in vitro without altering surface markers and cytokine production in vitro. While the biological impact of these findings remains unclear, our results indicate that bioaccumulation of durable NPs within the macrophages may lead to a suppression of bacterial uptake and possibly impair bactericidal activity.

60 APPLIED LIFE SCIENCES↗

Sensitive Fluorescent Determination of Cobalt by Microwave Assisted Synthesized TPTZ Functionalized Carbon Dots

Novel fluorescent carbon dots (CDs) for cobalt ions sensing were synthesized from 2,4,6-tris(2′-pyridyl)-s-triazine (TPTZ) and citric acid by microwave-assisted method in one pot. This sensor was water soluble, simple, sensitive and cheap. The size of the CDs was determined from transmission electron microscope image and was in the range of 10 nm. Under optimized experimental conditions, this luminescent system had stable response for Co (II) over a concentration range from 0.4 to 50 µM with a detection limit as low as 230 nM. The proposed method showed good sensitivity and selectivity with respect to interference ions. Finally, this system was used for Co (II) determination in tap water, river water and mineral water and B{sub 12} ampoule samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic Response of Defect Bound States to the Magnetic Field in Epitaxial FeSn Films

Crystal defects, whether intrinsic or engineered, drive many fundamental phenomena and novel functionalities of quantum materials. Here, we report symmetry-breaking phenomena induced by Sn vacancy defects on the surface of epitaxial Kagome antiferromagnetic FeSn films using low-temperature scanning tunneling microscopy and spectroscopy. Near the single Sn vacancy, anisotropic quasiparticle interference patterns are observed in the differential conductance dI/dV maps, breaking the 6-fold rotational symmetry of the Kagome layer. Furthermore, the Sn vacancy defects induce bound states that exhibit anomalous Zeeman shift under an out-of-plane magnetic field, where the energy of the bound states moves linearly toward higher energy independent of the direction of the magnetic field. Under an in-plane magnetic field, the shift of the bound state energy also shows a 2-fold oscillating behavior as a function of the azimuth angle. These findings demonstrate defectenabled new functionalities in Kagome antiferromagnets for potential applications in nanoscale spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design of error-compensating algorithms for sinusoidal phase shifting interferometry

An improved approach to interferometry using sinusoidal phase shifting balances several harmonic components in the interference signal against each other. The resulting computationally efficient phase-estimation algorithms have low sensitivity to errors such as spurious intensity noise, vibration, and errors in the phase shift pattern. Specific example algorithms employing 8 and 12 camera frames illustrate design principles that are extendable to algorithms of any length for applications that would benefit from a simplified, sinusoidal phase shift.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation of RE(DBM){sub 3}·Phen (RE=Eu{sup 3+},Tb{sup 3+}) Plate-Loading Fe{sub 3}O{sub 4} Nanospheres and their Magnetic-Optic Bifunctional Property

A facile wet chemical method has been used to synthesize bifunctional core-shell nanoparticles of Fe{sub 3}O{sub 4}@RE(DBM){sub 3}·Phen (RE=Eu{sup 3+},Tb{sup 3+}) showing an interesting combination of magnetic and luminescent properties. This method is convenient, cheap, and efficient. The morphology, structure, luminescent, and magnetic properties of the nanoparticles were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis absorption, fluorescence emission, and superconducting quantum interference device magnetometer (SQUID-VSM). The maximum emission peaks of novel Eu{sup 3+} and Tb{sup 3+} nanocomposites are at 618 nm and at 514 nm, respectively. And their corresponding special saturation magnetization Ms. are 25.853 emu/g and 24.015 emu/g, respectively. For the nanoparticles, it is shown that there have better magnetic behavior and they may act as red- and green-emitting material with potential application for fluorescent magnetic particle testing. Moreover, this chemical route could be used to obtain the development of several bifunctional systems of other rare earth ions for practical application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fano interference and a slight fluctuation of the Majorana hallmark

According to the Liu and Baranger [Phys. Rev. B 84, 201308(R) (2011)], an isolated Majorana state bound to one edge of a long enough Kitaev chain in the topological phase and connected to a quantum dot, results in a robust transmittance of 1/2 at zero-bias. In this work, we show that the removal of such a hallmark can be achieved by using a metallic surface hosting two adatoms in a scenario where there is a lack of symmetry in the Fano effect, which is feasible by coupling the Kitaev chain to one of these adatoms. Thus in order to detect this feature experimentally, one should apply the following two-stage procedure: (i) first, attached to the adatoms, one has to lock AFM tips in opposite gate voltages (symmetric detuning of the levels Δε) and measure by an STM tip, the zero-bias conductance; (ii) thereafter, the measurement of the conductance is repeated with the gates swapped. For |Δε| away from the Fermi energy and in the case of strong coupling tip-host, this approach reveals in the transmittance, a persistent dip placed at zero-bias and immune to the aforementioned permutation, but characterized by an amplitude that fluctuates slightly around 1/2. However, in the case of a tip acting as a probe, the adatom decoupled from the Kitaev chain becomes completely inert and no fluctuation is observed. Therefore, the STM tip must be considered in the same footing as the “host+adatoms” system. As a result, we have found that despite the small difference between these two Majorana dips, the zero-bias transmittance as a function of the symmetric detuning yields two distinct behaviors, in which one of them is unpredictable by the standard Fano's theory. Therefore, to access such a non trivial pattern of Fano interference, the hypothesis of the STM tip acting as a probe should be discarded.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation into the correlation factor of substrate and multilayer film surfaces by atomic force microscopy

A method for studying the correlations between substrate and film-coating profiles by atomic force microscopy, which makes it possible to calculate the correlation factor (a function of spatial frequency), has been developed. The spatial-frequency range in which the correlation factor can be reliably calculated is established. The method proposed is used to calculate the dependence of the correlation factor on spatial frequency for multilayer interference mirror elements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on Tribological Properties of CoCrMo Alloys against Metals and Ceramics as Bearing Materials for Artificial Cervical Disc

CoCrMo alloys are believed to be a kind of potential material for artificial cervical disc. However, the tribological properties of CoCrMo alloys against different metals and ceramics are not systematically studied. In this study, the tribological behaviors of CoCrMo alloys against metals (316L, Ti6Al4V) and ceramics (Si{sub 3}N{sub 4}, ZrO{sub 2}) were focused under dry friction and 25 wt.% newborn calf serum (NCS)-lubricated conditions using a ball-on-disc apparatus under reciprocating motion. The microstructure, composition and hardness of CoCrMo alloys were characterized using x-ray diffraction, scanning electron microscopy (SEM) and hardness testers, respectively. The contact angles of the CoCrMo alloys with deionized water and 25 wt.% NCS were measured by the OCA contact angle measuring instrument. The maximum wear width, wear depth and wear volume were measured by three-dimensional white light interference. The morphology and the EDX analysis of the wear marks on CoCrMo alloys were examined by SEM to determine the basic mechanism of friction and wear. The dominant wear mechanism in dry friction for CoCrMo alloys against all pairings was severe abrasive wear, accompanied with a lot of material transfer. Under 25 wt.% NCS-lubricated condition, the wear mechanism for CoCrMo alloys against ceramics (Si{sub 3}N{sub 4}, ZrO{sub 2}) was also mainly severe abrasive wear. However, severe abrasive wear and electrochemical corrosion occurred for the CoCrMo-316L pairing under lubrication. Severe abrasive wear, adhesive wear and electrochemical corrosion occurred for the CoCrMo-Ti6Al4V pairing under lubrication. According to the results, the tribological properties of CoCrMo alloys against ceramics were better than those against metals. The CoCrMo-ZrO{sub 2} pairing displayed the best tribological behaviors and could be taken as a potential candidate bearing material for artificial cervical disc.

36 MATERIALS SCIENCE↗

Controlling the opto-mechanics of a cantilever in an interferometer via cavity loss

In a non-contact atomic force microscope, based on interferometric cantilever displacement detection, the optical return loss of the system is tunable via the distance between the fiber end and the cantilever. We utilize this for tuning the interferometer from a predominant Michelson to a predominant Fabry-Pérot characteristics and introduce the Fabry-Pérot enhancement factor as a quantitative measure for multibeam interference in the cavity. This experimentally easily accessible and adjustable parameter provides a control of the opto-mechanical interaction between the cavity light field and the cantilever. The quantitative assessment of the light pressure acting on the cantilever oscillating in the cavity via the frequency shift allows an in-situ measurement of the cantilever stiffness with remarkable precision.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photo-induced mass transfer in metal nanocluster doped glasses under continuous wave laser irradiation

Mass transfer accompanying continuous wave optical recording in glasses with embedded silver nanoclusters has been studied using optical microscopy, STEM and AFM. Recording was carried out by two crossed laser beams (514 nm), which created a periodic intensity distribution on the illuminated surface of the glass-silver composites. The quality of the recorded gratings was found to be independent of the light polarization. It was determined that laser irradiation induces two mass transfer processes: diffusion coalescence of nanoclusters and redistribution of silver between illuminated and nonilluminated interference lines. The temperature profile under the illuminated surface has been calculated, as well as the kinetics of the mass redistribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental observation of topological Fermi arcs in type-II Weyl semimetal MoTe2

Weyl semimetal is a new quantum state of matter hosting the condensed matter physics counterpart of the relativistic Weyl fermions originally introduced in high-energy physics. The Weyl semimetal phase realized in the TaAs class of materials features multiple Fermi arcs arising from topological surface states and exhibits novel quantum phenomena, such as a chiral anomaly-induced negative magnetoresistance and possibly emergent supersymmetry. Recently it was proposed theoretically that a new type (type-II) of Weyl fermion that arises due to the breaking of Lorentz invariance, which does not have a counterpart in high-energy physics, can emerge as topologically protected touching between electron and hole pockets. In this work, we report direct experimental evidence of topological Fermi arcs in the predicted type-II Weyl semimetal MoTe 2 (refs 23-25). Additionally, the topological surface states are confirmed by directly observing the surface states using bulk- and surface-sensitive angle-resolved photoemission spectroscopy, and the quasi-particle interference pattern between the putative topological Fermi arcs in scanning tunnelling microscopy. By establishing MoTe 2 as an experimental realization of a type-II Weyl semimetal, our work opens up opportunities for probing the physical properties of this exciting new state.

36 MATERIALS SCIENCE↗

Imaging collective behavior in an rf-SQUID metamaterial tuned by DC and RF magnetic fields

In this study, we examine the collective behavior of two-dimensional nonlinear superconducting metamaterials using a non-contact spatially resolved imaging technique. The metamaterial is made up of sub-wavelength nonlinear oscillators in a strongly coupled 27x27 planar array of radio-frequency Superconducting QUantum Interference Devices (rf SQUIDs). By using low-temperature laser scanning microscopy we image microwave currents in the driven SQUIDs while in non-radiating dark modes and identify the clustering and uniformity of like-oscillating meta-atoms. We follow the rearrangement of coherent patterns due to meta-atom resonant frequency tuning as a function of external dc and rf magnetic flux bias. We find that the rf current distribution across the SQUID array at zero dc flux and small rf flux reveals a low degree of coherence. By contrast, the spatial coherence improves dramatically upon increasing of rf flux amplitude, in agreement with simulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase and contrast moiré signatures in two-dimensional cone beam interferometry

Neutron interferometry has played a distinctive role in fundamental science and characterization of materials. Moiré neutron interferometers are candidate next-generation instruments: they offer microscopy-like magnification of the signal, enabling direct camera recording of interference patterns across the full neutron wavelength spectrum. Here we demonstrate the extension of phase-grating moiré interferometry to two-dimensional geometries. Our fork-dislocation phase gratings reveal phase singularities in the moiré pattern, and we explore orthogonal moiré patterns with two-dimensional phase gratings. Our measurements of phase topologies and gravitationally induced phase shifts are in good agreement with theory. These techniques can be implemented in existing neutron instruments to advance interferometric analyses of emerging materials and precision measurements of fundamental constants. Published by the American Physical Society 2024

Sarenac, D. (ORCID:0000000185753367)↗

Measurements of striae in CR+ doped YAG laser crystals

Striations in Czochralski (CZ) grown crystals have been observed in materials such as GaAs, silicon, photorefractive crystals used for data storage, potassium titanyl phosphate crystals and LiNbO3. Several techniques have been used for investigating these defects including electron microscopy, laser scanning tomography, selective photoetching, X-ray diffuse scattering, interference orthoscopy, laser interferometry and micro-Fourier transform infrared spectroscopy mapping. A 2mm thick sample of the material to be investigated is illuminated with light that is absorbed and non-absorbed by the ion concentration to be observed. The back surface of the sample is focused onto a solid-state image detector and images of the input beam and absorbed (and diffracted) beams are captured at two wavelengths. The variation of the coefficient of absorption asa function of distance on the sample can be derived from these measurements. A Big Sky Software Beamcode system is used to capture and display images. Software has been written to convert the Beamcode data files to a format that can be imported into a spreadsheet program such as Quatro Pro. The spreadsheet is then used to manipulate and display data. A model of the intensity map of the striae collected by the imaging system has been proposed and a data analysis procedure derived. From this, the variability of the attenuation coefficient alpha can be generated. Preliminary results show that alpha may vary by a factor of four or five over distances of 100 mu m. Potential errors and problems have been discovered and additional experiments and improvements to the experimental setup are in progress and we must now show that the measurement techniques and data analysis procedures provide 'real' information. Striae are clearly visible at all wavelengths including white light. Their basic spatial frequency does not change radically, at least when changing from blue to green to white light. Further experimental and theoretical work can be done to improve the data collection techniques and to verify the data analysis procedures.

Cady, Fredrick M.↗