Search NASA⌕ Search

SEARCH · Search NASA

Results for “Intermediate Representation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Semivolatile POA and parameterized total combustion SOA in CMAQv5.2: impacts on source strength and partitioning

Abstract. Mounting evidence from field and laboratory observations coupled with atmospheric model analyses shows that primary combustion emissions of organic compounds dynamically partition between the vapor and particulate phases, especially as near-source emissions dilute and cool to ambient conditions. The most recent version of the Community Multiscale Air Quality model version 5.2 (CMAQv5.2) accounts for the semivolatile partitioning and gas-phase aging of these primary organic aerosol (POA) compounds consistent with experimentally derived parameterizations. We also include a new surrogate species, potential secondary organic aerosol from combustion emissions (pcSOA), which provides a representation of the secondary organic aerosol (SOA) from anthropogenic combustion sources that could be missing from current chemical transport model predictions. The reasons for this missing mass likely include the following: (1) unspeciated semivolatile and intermediate volatility organic compound (SVOC and IVOC, respectively) emissions missing from current inventories, (2) multigenerational aging of organic vapor products from known SOA precursors (e.g., toluene, alkanes), (3) underestimation of SOA yields due to vapor wall losses in smog chamber experiments, and (4) reversible organic compounds–water interactions and/or aqueous-phase processing of known organic vapor emissions. CMAQ predicts the spatially averaged contribution of pcSOA to OA surface concentrations in the continental United States to be 38.6 and 23.6 % in the 2011 winter and summer, respectively. Whereas many past modeling studies focused on a particular measurement campaign, season, location, or model configuration, we endeavor to evaluate the model and important uncertain parameters with a comprehensive set of United States-based model runs using multiple horizontal scales (4 and 12 km), gas-phase chemical mechanisms, and seasons and years. The model with representation of semivolatile POA improves predictions of hourly OA observations over the traditional nonvolatile model at sites during field campaigns in southern California (CalNex, May–June 2010), northern California (CARES, June 2010), the southeast US (SOAS, June 2013; SEARCH, January and July, 2011). Model improvements manifest better correlations (e.g., the correlation coefficient at Pasadena at night increases from 0.38 to 0.62) and reductions in underprediction during the photochemically active afternoon period (e.g., bias at Pasadena from −5.62 to −2.42 µg m−3). Daily averaged predictions of observations at routine-monitoring networks from simulations over the continental US (CONUS) in 2011 show modest improvement during winter, with mean biases reducing from 1.14 to 0.73 µg m−3, but less change in the summer when the decreases from POA evaporation were similar to the magnitude of added SOA mass. Because the model-performance improvement realized by including the relatively simple pcSOA approach is similar to that of more-complicated parameterizations of OA formation and aging, we recommend caution when applying these more-complicated approaches as they currently rely on numerous uncertain parameters. The pcSOA parameters optimized for performance at the southern and northern California sites lead to higher OA formation than is observed in the CONUS evaluation. This may be due to any of the following: variations in real pcSOA in different regions or time periods, too-high concentrations of other OA sources in the model that are important over the larger domain, or other model issues such as loss processes. This discrepancy is likely regionally and temporally dependent and driven by interferences from factors like varying emissions and chemical regimes.

54 ENVIRONMENTAL SCIENCES↗

Cloud response to co-condensation of water and organic vapors over the boreal forest

Abstract. Accounting for the condensation of organic vapors along with water vapor (co-condensation) has been shown in adiabatic cloud parcel model (CPM) simulations to enhance the number of aerosol particles that activate to form cloud droplets. The boreal forest is an important source of biogenic organic vapors, but the role of these vapors in co-condensation has not been systematically investigated. In this work, the environmental conditions under which strong co-condensation-driven cloud droplet number enhancements would be expected over the boreal biome are identified. Recent measurement technology, specifically the Filter Inlet for Gases and AEROsols (FIGAERO) coupled to an iodide-adduct chemical ionization mass spectrometer (I-CIMS), is utilized to construct volatility distributions of the boreal atmospheric organics. Then, a suite of CPM simulations initialized with a comprehensive set of concurrent aerosol observations collected in the boreal forest of Finland during spring 2014 is performed. The degree to which co-condensation impacts droplet formation in the model is shown to be dependent on the initialization of temperature, relative humidity, updraft velocity, aerosol size distribution, organic vapor concentration, and the volatility distribution. The predicted median enhancements in cloud droplet number concentration (CDNC) due to accounting for the co-condensation of water and organics fall on average between 16 % and 22 %. This corresponds to activating particles 10–16 nm smaller in dry diameter that would otherwise remain as interstitial aerosol. The highest CDNC enhancements (ΔCDNC) are predicted in the presence of a nascent ultrafine aerosol mode with a geometric mean diameter of ∼ 40 nm and no clear Hoppel minimum, indicative of pristine environments with a source of ultrafine particles (e.g., via new particle formation processes). Such aerosol size distributions are observed 30 %–40 % of the time in the studied boreal forest environment in spring and fall when new particle formation frequency is the highest. To evaluate the frequencies with which such distributions are experienced by an Earth system model over the whole boreal biome, 5 years of UK Earth System Model (UKESM1) simulations are further used. The frequencies are substantially lower than those observed at the boreal forest measurement site (< 6 % of the time), and the positive values, peaking in spring, are modeled only over Fennoscandia and the western parts of Siberia. Overall, the similarities in the size distributions between observed and modeled (UKESM1) are limited, which would limit the ability of this model, or any model with a similar aerosol representation, to project the climate relevance of co-condensation over the boreal forest. For the critical aerosol size distribution regime, ΔCDNC is shown to be sensitive to the concentrations of semi-volatile and some intermediate-volatility organic compounds (SVOCs and IVOCs), especially when the overall particle surface area is low. The magnitudes of ΔCDNC remain less affected by the more volatile vapors such as formic acid and extremely low- and low-volatility organic compounds (ELVOCs and LVOCs). The reasons for this are that most volatile organic vapors condense inefficiently due to their high volatility below the cloud base, and the concentrations of LVOCs and ELVOCs are too low to gain significant concentrations of soluble mass to reduce the critical supersaturations enough for droplet activation to occur. A reduction in the critical supersaturation caused by organic condensation emerges as the main driver of the modeled ΔCDNC. The results highlight the potential significance of co-condensation in pristine boreal environments close to sources of fresh ultrafine particles. For accurate predictions of co-condensation effects on CDNC, also in larger-scale models, an accurate representation of the aerosol size distribution is critical. Further studies targeted at finding observational evidence and constraints for co-condensation in the field are encouraged.

54 ENVIRONMENTAL SCIENCES↗

Bandwidth compression of synthetic aperture radar imagery by quantization of raw radar data

A study is made of the effects of quantization of the radar returns transmitted from aircraft or spacecraft employing a synthetic aperture radar system. The study is based on the output images obtained after one-bit, two-bit, and eight-bit quantizations and comparing the results to ground truth. In this way the degradation resulting from data or bandwidth reduction is determined. Quantization is evaluated in terms of crater scene, number of looks, and transmission error rate. It is found that two-bit quantization of raw radar data from homogeneous scenes processed to 32 looks yields nearly all the details of the original. One-bit quantization of raw radar data from homogeneous scenes processed to 32 looks yields a good visual representation of the scene but some fine detail is lost and the absolute reflectivity level is not reliable. Image quality is observed to improve with more looks and video and intermediate frequency quantization are not distinguishable even for one-bit quantizations. Image quality is not influenced by bit error rates less than about 2 to the -7th power.

Lipes, R. G.↗

Calculations of the variability of ice cloud radiative properties at selected solar wavelengths

This study shows that there is surprising little difference in values of reflectance, absorptance, and transmittance for many of the intermediate-size particle spectra. Particle size distributions with mode radii ranging from approximately 50 to 300 microns, irrespective of particle shape and nearly independent of the choice of size distribution representation, give relatively similar flux values. The very small particle sizes, however, have significantly larger values of reflectance and transmittance with corresponding smaller values of absorptance than do the larger particle sizes. The very large particle modes produce very small values of reflectance and transmittance along with very large values of absorptance. Such variations are particularly noticeable when plotted as a function of wavelength.

Welch, R. M.↗

Digital image analysis to quantify carbide networks in ultrahigh carbon steels

A method has been developed and demonstrated to quantify the degree of carbide network connectivity in ultrahigh carbon steels through digital image processing and analysis of experimental micrographs. It was shown that the network connectivity and carbon content can be correlated to toughness for various ultrahigh carbon steel specimens. The image analysis approach first involved segmenting the carbide network and pearlite matrix into binary contrast representations via a grayscale intensity thresholding operation. Next, the carbide network pixels were skeletonized and parceled into braches and nodes, allowing the determination of a connectivity index for the carbide network. Intermediate image processing steps to remove noise and fill voids in the network are also detailed. The connectivity indexes of scanning electron micrographs were consistent in both secondary and backscattered electron imaging modes, as well as across two different (50 × and 100 ×) magnifications. Results from ultrahigh carbon steels reported here along with other results from the literature generally showed lower connectivity indexes correlated with higher Charpy impact energy (toughness). A deviation from this trend was observed at higher connectivity indexes, consistent with a percolation threshold for crack propagation across the carbide network. - Highlights: • A method for carbide network analysis in steels is proposed and demonstrated. • ImageJ method extracts a network connectivity index from micrographs. • Connectivity index consistent in different imaging conditions and magnifications. • Impact energy may plateau when a critical network connectivity is exceeded.

36 MATERIALS SCIENCE↗

Permutation-invariant distance between atomic configurations

We present a permutation-invariant distance between atomic configurations, defined through a functional representation of atomic positions. This distance enables us to directly compare different atomic environments with an arbitrary number of particles, without going through a space of reduced dimensionality (i.e., fingerprints) as an intermediate step. Moreover, this distance is naturally invariant through permutations of atoms, avoiding the time consuming associated minimization required by other common criteria (like the root mean square distance). Finally, the invariance through global rotations is accounted for by a minimization procedure in the space of rotations solved by Monte Carlo simulated annealing. A formal framework is also introduced, showing that the distance we propose verifies the property of a metric on the space of atomic configurations. Two examples of applications are proposed. The first one consists in evaluating faithfulness of some fingerprints (or descriptors), i.e., their capacity to represent the structural information of a configuration. The second application concerns structural analysis, where our distance proves to be efficient in discriminating different local structures and even classifying their degree of similarity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spinning geodesic Witten diagrams

We present an expression for the four-point conformal blocks of symmetric traceless operators of arbitrary spin as an integral over a pair of geodesics in Anti-de Sitter space, generalizing the geodesic Witten diagram formalism of Hijano et al. to arbitrary spin. As an intermediate step in the derivation, we identify a convenient basis of bulk threepoint interaction vertices which give rise to all possible boundary three point structures. Lastly, we highlight a direct connection between the representation of the conformal block as geodesic Witten diagram and the shadow operator formalism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transition probabilities and oscillator strengths of E1 transitions in Fe XII and Fe XIV

Non-orthogonal orbitals in the multiconfiguration Hartree-Fock approach are used to calculate line strengths, oscillator strengths and transition probabilities for E1 transitions among the fine-structure levels of the 3s{sup 2}3p{sup 3}, 3s3p{sup 4}, 3s{sup 2}3p{sup 2}3d, 3s3p{sup 3}3d, 3p{sup 5} and 3s{sup 2}3p3d{sup 2} configurations in Fe XII and 3s{sup 2}3p, 3s3p{sup 2}, 3s{sup 2}3d, 3p{sup 3}, 3s3p3d, 3p{sup 2}3d, 3s3d{sup 2}, 3p3d{sup 2}, 3s{sup 2}4s, 3s{sup 2}4p, 3s3p4s and 3s{sup 2}4d configurations in Fe XIV. The lifetimes of excited levels belonging to these configurations of Fe XII and Fe XIV are also presented. An accurate representation of the levels has been obtained using spectroscopic and correlation radial functions. The wavefunctions exhibit large correlations and significant dependence of one-electron valence orbitals due to both the total and intermediate terms. The relativistic corrections are included through the one-body and two-body operators in the Breit-Pauli Hamiltonian. Progressively larger calculations are performed to check for important electron correlation contributions and for convergence of results. The atomic wavefunctions give excitation energies which are in close agreement with experiment. The present oscillator strengths and transition probabilities compare very well with previous large scale calculations. - Highlights: {yields} Fe XII and Fe XIV oscillator strengths and transition probabilities for E1 transitions. {yields} Energies and lifetimes of excited levels of Fe XII and Fe XIV. {yields} Multiconfiguration Hartree-Fock calculations with non-orthogonal radial functions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Projecting Changes in the Frequency and Magnitude of Ozone Pollution Events Under Uncertain Climate Sensitivity

Abstract Climate change is projected to worsen ozone pollution over many populated regions, with larger impacts at higher concentrations. More intense and frequent ozone episodes risk setbacks to human health and environmental policy achievements. However, assessing these changes is complicated by uncertain climate sensitivity, closely related to climate model response, and internal variability in simulations projecting climate's influence on air quality. Here, leveraging a global modeling framework that one‐way couples a human activity model, an Earth system model of intermediate complexity, and an atmospheric chemistry model, we investigate the role of climate sensitivity in climate‐induced changes to high ozone pollution episodes in the United States using multiple greenhouse gas emissions scenarios, representations of climate sensitivity, and initial condition members. We bias correct and evaluate historical model simulations, identifying modeled and observed O 3 episodes using extreme value theory, and extend the approach to projections of mid‐ and end‐century climate impacts. Results show that the influence of climate sensitivity can be as significant as that of greenhouse gas emissions scenario absent precursor emissions changes. Climate change is projected to increase the magnitude of the highest annually occurring O 3 concentrations by over 2.3 ppb on average across the U.S. at mid‐century under a high climate sensitivity and moderate emissions scenario, but the increase is limited to less than 0.3 ppb under lower climate sensitivity. Further, we show that areas in the U.S. currently meeting air quality standards risk being pushed into non‐compliance due to a climate‐induced increase in frequency of high ozone days.

Environmental Sciences & Ecology↗

Characterizing and quantifying uncertainty in projections of climate change impacts on air quality

Climate change can aggravate air pollution, with important public health and environmental consequences. While major sources of uncertainty in climate change projections - greenhouse gas (GHG) emissions scenario, model response, and internal variability - have been investigated extensively, their propagation to estimates of air quality impacts has not been systematically assessed. Here, we compare these uncertainties using a coupled modeling framework that includes a human activity model, an Earth system model of intermediate complexity, and a global atmospheric chemistry model. Uncertainties in projections of U.S. air quality under 21st century climate change are quantified based on a climate-chemistry ensemble that includes multiple initializations, representations of climate sensitivity, and climate policy scenarios, under constant air pollution emissions. We find that climate-related uncertainties are comparable at mid-century, making it difficult to distinguish the impact of variations in GHG emissions on ozone and particulate matter pollution. While GHG emissions scenario eventually becomes the dominant uncertainty based on the scenarios considered, all sources of uncertainty are significant through the end of the century. The results provide insights into intrinsically different uncertainties in projections of air pollution impacts and the potential for large ensembles to better capture them.

54 ENVIRONMENTAL SCIENCES↗

Solvent effects on triplet yields in BODIPY-based photosensitizers

Here, we employ molecular dynamics simulations and quantum rate theories to elucidate the complex condensed-phase dynamics underpinning triplet-state formation in organic photosensitizers. Using models informed by first-principles calculations complete with a molecular representation of solvents of different polarities, we elucidate the interplay of the internal and environmental interactions underlying triplet yield. We find that triplet yields depend sensitively on the dielectric stabilization of the charge transfer intermediate that facilitates a transition into the triplet manifold. Our results illustrate the importance of molecularly detailed models in understanding the excited-state internal charge-transfer dynamics of photochemically relevant organic molecules.

Coello Escalante, Leonardo [University of Californ↗

Efficient Simulation of Open Quantum Systems on NISQ Trapped‐Ion Hardware

Abstract Simulating open quantum systems, which interact with external environments, presents significant challenges on noisy intermediate‐scale quantum (NISQ) devices due to limited qubit resources and noise. In this study, an efficient framework is proposed for simulating open quantum systems on NISQ hardware by leveraging a time‐perturbative Kraus operator representation of the system's dynamics. This approach avoids the computationally expensive Trotterization method and exploits the Lindblad master equation to represent time evolution in a compact form, particularly for systems satisfying specific commutation relations. The efficiency of this method is demonstrated by simulating quantum channels, such as the continuous‐time Pauli channel and damped harmonic oscillators, on NISQ trapped‐ion hardware, including IonQ Harmony and Quantinuum H1‐1. Additionally, hardware‐agnostic error mitigation techniques are introduced, including Pauli channel fitting and quantum depolarizing channel inversion, to enhance the fidelity of quantum simulations. These results show strong agreement between the simulations on real quantum hardware and exact solutions, highlighting the potential of Kraus‐based methods for scalable and accurate simulation of open quantum systems on NISQ devices. This framework opens pathways for simulating more complex systems under realistic conditions in the near term.

Burdine, Colin [Department of Electrical and Compu↗

Production Operations Management System (POMS) for Fermilab Experiments

The Production Operations Management System (POMS) software allows production teams and analysis groups across multiple Fermilab experiments to launch, modify and monitor large scale campaigns of related Monte Carlo or data processing jobs, and currently manages the majority of production computing of experiments at Fermilab.POMS provides a web service interface that enables automated job submission on distributed resources according to customers’ requests, as well as subsequent monitoring of those submissions as well as recovery of failed submissions, debugging and record keeping.POMS interfaces with existing HEP data access, processing, movement and monitoring tools at Fermilab, including Jobsub (for job submission), SAM (for data management), and Landscape (for monitoring), and in combination with them handles the creation of intermediate datasets of files for multistage campaigns.POMS visualizes these campaigns with an interactive GUI interface. An important feature of POMS is a one-to-one connection between the GUI campaign visualizer and a text based representation of the complete campaign configuration. An extensible library of template campaign configurations is available. The templates are user modifiable and map cleanly to and from the GUI description of the campaign.This paper will discuss the current usage, history, and some technical details of POMS, as well as planned future extensions, particularly interfacing with Rucio as well as SAM for file movement.

Mengel, Marc↗

Acceleration of saddle-point searches with machine learning

In atomistic simulations, the location of the saddle point on the potential-energy surface (PES) gives important information on transitions between local minima, for example, via transition-state theory. However, the search for saddle points often involves hundreds or thousands of ab initio force calls, which are typically all done at full accuracy. This results in the vast majority of the computational effort being spent calculating the electronic structure of states not important to the researcher, and very little time performing the calculation of the saddle point state itself. In this work, we describe how machine learning (ML) can reduce the number of intermediate ab initio calculations needed to locate saddle points. Since machine-learning models can learn from, and thus mimic, atomistic simulations, the saddle-point search can be conducted rapidly in the machine-learning representation. The saddle-point prediction can then be verified by an ab initio calculation; if it is incorrect, this strategically has identified regions of the PES where the machine-learning representation has insufficient training data. When these training data are used to improve the machine-learning model, the estimates greatly improve. This approach can be systematized, and in two simple example problems we demonstrate a dramatic reduction in the number of ab initio force calls. We expect that this approach and future refinements will greatly accelerate searches for saddle points, as well as other searches on the potential energy surface, as machine-learning methods see greater adoption by the atomistics community.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Report on the 2-D Model Intercomparison Workshop held January 11-16, 1987 in Fort Myers Beach, Florida, chapter 2

In the attempts to understand the processes which affect ozone in the stratosphere, and to predict future ozone levels, a variety of computer models were developed and employed. To oversimplify somewhat, the models range from 1-D models with intricately detailed photochemistry but only the crudest representation of transport, to 3-D general circulation models with intricately detailed dynamics and no photochemistry at all. Each of these has its appropriate uses. It was felt that there was much to be gained from intermediate models incorporating an extensive treatment of photochemistry with a dynamical framework which at least recognizes that atmospheric motions are advective as well as diffusive, and that both chemistry and dynamics are subject to latitudinal and seasonal variations. Thus the 2-D, zonally averaged models have begun to play a larger role in the last seven years, both in attempting to understand observed distributions of trace species and in attempting to assess the probable effects of antropogenic perturbations. There are many choices to be made in developing the model. It was the purpose of the 2-D model Intercomparison Workshop to permit discussion of the choices made and the behavior of the resulting models. The goal was not to identify a best set of choices, but rather to identify areas in which the models are sensitive to the choices made, and to develop a sense of where these models as a class do well or poorly in simulating the observed atmosphere.

Guthrie, Paul D.↗

Magnetic Photon Splitting: The S-Matrix Formulation in the Landau Representation

Calculations of reaction rates for the third-order QED process of photon splitting gamma yields gamma.gamma in strong magnetic fields traditionally have employed either the effective Lagrangian method or variants of Schwinger's proper-time technique. Recently, Mentzel, Berg and Wunner [1] presented an alternative derivation via an S-matrix formulation in the Landau representation. Advantages of such a formulation include the ability to compute rates near pair resonances above pair threshold. This paper presents new developments of the Landau representation formalism as applied to photon splitting, providing significant, advances beyond the work of [1] by summing over the spin quantum numbers of the electron propagators, and analytically integrating over the component of momentum of the intermediate states that is parallel to field. The ensuing tractable expressions for the scattering amplitudes are satisfyingly compact, and of an appearance familiar to S-matrix theory applications. Such developments can facilitate numerical computations of splitting considerably both below and above pair threshold. Specializations to two regimes of interest are obtained, namely the limit of highly supercritical fields and the domain where photon energies are far inferior to that for the threshold of single-photon pair creation. In particular, for the first time the low-frequency amplitudes are simply expressed in terms of the Gamma function, its integral and its derivatives. In addition, the equivalence of the asymptotic forms in these two domains to extant results from effective Lagrangian/proper- time formulations is demonstrated.

Baring, Matthew G.↗

Structure and prospects of the simplest SO(10) GUTs

We recapitulate the latest results on the class of the simplest SO(10) grand unified models in which the GUTscale symmetry breaking is triggered by an adjoint Higgs representation. We argue that the minimal survival approximation traditionally used in the GUT-and seesaw-scale estimates tends to be blind to very interesting parts of the parameter space in which some of the intermediate-scale states necessary for non-supersymmetric unification of the SM gauge couplings can be as light as to leave their imprints in the TeV domain. The stringent minimal-survival-based estimates of the B - L scale are shown to be relaxed by as much as four orders of magnitude, thus admitting for a consistent implementation of the standard seesaw mechanism even without excessive fine-tuning implied by the previous studies. The prospects of the minimal renormalizable SO(10) GUT as a potential candidate for a well-calculable theory of proton decay are discussed in brief.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optical Matrix.Matrix Multiplier

Proposed apparatus for optical multiplication of two matrices based on Stanford optical vector.matrix multiplier. Does not require redundant representation of one of matrices. Because apparatus performs multiplication in fully parallel manner, incorporated as subsystem into large optical-processing system. Optical matrix.matrix multiplier processes inputs in fully parallel fashion, without redundant matrix images or ancillary intermediate electronic processing.

Gheen, Gregory↗