Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inverse Multiplication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Comparison of Carrier Multiplication Yields in PbS and PbSe Nanocrystals: The Role of Competing Energy-Loss Processes

Infrared band gap semiconductor nanocrystals are promising materials for exploring generation III photovoltaic concepts that rely on carrier multiplication or multiple exciton generation, the process in which a single high-energy photon generates more than one electron-hole pair. In this work, we present measurements of carrier multiplication yields and biexciton lifetimes for a large selection of PbS nanocrystals and compare these results to the well-studied PbSe nanocrystals. The similar bulk properties of PbS and PbSe make this an important comparison for discerning the pertinent properties that determine efficient carrier multiplication. We observe that PbS and PbSe have very similar biexciton lifetimes as a function of confinement energy. Together with the similar bulk properties, this suggests that the rates of multiexciton generation, which is the inverse of Auger recombination, are also similar. The carrier multiplication yields in PbS nanocrystals, however, are strikingly lower than those observed for PbSe nanocrystals. We suggest that this implies the rate of competing processes, such as phonon emission, is higher in PbS nanocrystals than in PbSe nanocrystals. Indeed, our estimations for phonon emission mediated by the polar Froehlich-type interaction indicate that the corresponding energy-loss rate is approximately twice as large in PbS than in PbSe.

14 SOLAR ENERGY↗

Hardening of DOE UQ Codes for Ultra-Deep Proactive Geosteering in Oilfield Service

The primary objective of this project was to harden the DOE uncertainty quantification (UQ) code to solve the inverse problem for the geosteering service in the oilfield drilling and exploration. The primary focus is to verify the feasibility of using QUESO to solve geosteering inverse problems through statistical inversion. QUESO is a software library developed by QUEST, a DOE's Scientific Discovery through Advanced Computing (SciDAC) institute. In the process of drilling a borehole, geosteering is the act of adjusting the well trajectory on the fly to reach the geological targets or to keep the wellbore within desired formation. Geosteering inversion is to infer underground formation structure using measurements such as azimuthal resistivity logging data. The geosteering process relies on the real-time reconstruction of the subsurface earth model, and a robust and efficient inversion algorithm is always necessary to satisfy the job requirement. The new generation of azimuthal resistivity geosteering tool is capable of detecting multiple formation boundaries 20-100 ft away, and the corresponding geosteering inversion problem can be very challenging as many parameters need to be inverted within such a large depth of investigation. The success of the project will support US energy security by helping to advance subsurface modeling and characterization technologies in oilfield applications. An effective subsurface inversion algorithm and the implementation as a software package will promote the usage of ultra-deep azimuthal resistivity measurements, which can help well placement in complicated underground environments, reduce costs and risks of drilling, and increase oil and gas production. It will help medium and small size independent service companies and tool manufactures to enter the more advanced and lucrative directional drilling area. In addition, by hardening the QUESO code and building a transparent interface for easy manipulation of the QUESO functions, we provide a user-friendly tool for a larger scientific and industry communities that rely heavily on modeling and simulation tools for forecasting, parameter studies, design, and decision making. These are all activities that can strongly benefit from meaningful representations of modeling uncertainty supported by our product.

58 GEOSCIENCES↗

Overview of IMPACT Data Acquisition System and Data Reduction Process

This report documents the development of the data acquisition system (DAS) and data reduction methodologies for the Irradiated Material Property Accelerated Characterization Test (IMPACT) experiment at the Advanced Test Reactor (ATR). The IMPACT experiment is designed to enable in-pile measurement of thermal conductivity in metallic nuclear fuels, specifically U-10Zr, using an instrumented thermal conductivity probe. The DAS supports both passive temperature monitoring and active thermal interrogation of the probe through controlled AC and DC excitation. Significant modifications to laboratory-scale systems were required to accommodate the higher resistance paths associated with the in-pile application. Custom electronics and relay-controlled measurement sequencing were developed to enable the measurement and sufficient power delivery to the sensing region. A reduced-order, axisymmetric thermal model based on the thermal quadrupoles method is presented to support data interpretation. This model enables efficient evaluation of transient heat transfer behavior and facilitates solution of the inverse problem required to extract thermal properties from measured signals. Multiple boundary condition formulations are discussed to address varying experimental time scales and geometries. Additionally, machine learning techniques are introduced to support data reduction and improve confidence in inverse solutions. Convolutional neural networks are applied to identify the presence of gas gaps and other evolving geometric features that significantly impact thermal response during irradiation. These efforts contribute to the broader integration of digital twin frameworks and real-time modeling capabilities within the Advanced Fuels Campaign.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

Forward and inverse modeling of fault transmissibility in subsurface flows

Characterizing physical properties of faults, such as their transmissibility, is crucial for performing predictive numerical simulation of subsurface flows, such as those encountered in petroleum engineering and remediation of subsurface contamination. Here, this paper provides a complete investigation of the inverse problem for fault transmissibility in subsurface flow models, under appropriate assumptions on fault structure. In particular, the following aspects are considered: 1) fault modeling and well-posedness of the forward problem; 2) finite element (FEM) discretizations of the forward problem and their rigorous a priori convergence analysis; 3) Well-posedness of the Bayesian inverse problem, FEM discretization of the infinite dimensional Bayesian inverse formulation, and its rigorous a priori analysis. Moreover, computation of the maximum a posteriori (MAP) point via fast inexact Newton-conjugate gradient optimization and a Laplace approximation of the Bayesian posterior are also presented. Numerical results illustrate the use of the proposed fault model in forward and inverse problems for subsurface flows in two dimensional domains with multiple faults.

97 MATHEMATICS AND COMPUTING↗

ForceFinder

SAND2025-11750O ForceFinder extends the Structural Dynamics Python Libraries (SDynPy) with comprehensive tools for inverse source estimation (ISE) tasks via frequency response function (FRF) matrix inversion. The software is designed for transfer path analysis and multiple-input/multiple-output (MIMO) vibration control problems. It allows users to estimate sources through various algorithms, from the basic Moore-Penrose pseudo-inverse to statistical learning methods such as Tikhonov regularization via an L-curve and elastic net regularization via an information criterion. ForceFinder uses an object-oriented framework, where all components of the ISE problem—such as FRFs, responses, and transformations—are stored in a "SourcePathReceiver" object. This software can be applied to any noise and vibration problem. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Carter, Steven [Sandia National Lab. (SNL-CA), Liv↗

Ab initio multishell valence-space Hamiltonians and the island of inversion

In the shell-model framework, valence-space Hamiltonians connecting multiple major-oscillator shells are of key interest for investigating the physics of neutron-rich nuclei, which have been the subject of intense experimental activity for decades. Here we present an extension of the ab initio valence-space in-medium similarity renormalization group, which allows the derivation of such Hamiltonians nonperturbatively. Starting from initial two- and three-nucleon forces from chiral effective field theory, we then calculate properties of nuclei in the important island-of-inversion region above oxygen, so far unexplored with ab initio methods. In this work, our results in the neon and magnesium isotopes indicate the importance of neutron excitation from the $\textit{sd}$ to $\textit{pf}$ shells and ground states dominated by intruder configurations around $\textit{N}$ = 20, consistent with the conclusions from phenomenological studies. We also benchmark the excitation spectrum of 16 O with coupled-cluster theory, finding generally good agreement, and discuss implications for ground-state energies and charge radii in oxygen and calcium isotopes. Finally we outline the proper procedure for treating the longstanding issue of center-of-mass contamination, and show that with a particular choice of valence space, these spurious states can be removed successfully.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fracture Diagnostics Using Low Frequency Electromagnetic Induction and Electrically Conductive Proppants

The monitoring and diagnostics of induced fractures are important for the real-time performance evaluation of hydraulic fracturing operations. Previous electromagnetic (EM) based studies show that single backbone tri-axial induction logging tools are promising candidates for real-time monitoring and diagnosis of fractures in open-hole wells. To support the development of field deployable tools, the concept must be tested in experiments, in a controllable environment, before it is tested under field-like conditions. To this end, we have developed numerical tools which can simulate any wellbore environment while logging hydraulic fractures with the induction tool. We have designed and built a prototype induction tool and performed two sets of tests to compare with numerical simulation results. The computational and experimental setup consists of tri-axial transmitter- and receiver-coils in co-axial, co-planar and cross-polarized configurations. Both lab and shallow earth measurements are shown to be in good agreement with simulations for all examined cases. The average relative and maximum discrepancies of the measured signals from the simulated ones were lower than 3% and 10%, respectively. With the prototype tool, strong signals sensitive to the fracture’s surface area and dip-angle were measured in co-axial coil configuration, while weaker signals sensitive to the fracture’s aspect ratio were observed in the co-planar configuration. Cross-polarized signals are also shown to be strong and sensitive to the fracture’s dip. Lastly, we resolved the detectable components of the signal tensor to obtain parameters of simplified fracture geometries. The inversion algorithm, a derivative free directional search model, uses an objective function defined as a combination of co-axial and cross-polarized signals from different tool spacings to provide a well behaved global minimum. The robustness of inversion algorithm is tested on synthetic data for single cluster fractures in homogeneous and heterogeneous background electrical conductivity. All the effective model parameters for different cases, fracture conductivity (width), propped area (length) and dip-angle, are shown to be recovered with sufficient accuracy. We also evaluated the effect of multiple neighboring fractures and suggested a multi-cluster inversion algorithm that can accurately recover the proppant distribution in each fracture. Based on these results we provide a downhole tool design, with detailed specifications, that can effectively recover far-field proppant distribution in hydraulic fractures.

02 PETROLEUM↗

Crystal structure of Tb5Ni2In4 and Y5Ni2In4, and magnetic properties of Dy5Ni2In4

The crystal structure of the R5Ni2In4 intermetallic compounds was earlier reported for R Ho, Er, Tm, and Lu (Lu5Ni2In4-type, oP22, Pbam); more recently the isostructural phases Dy5Ni2In4 and Sc5Ni2In4 have also been identified. Three inequivalent crystallographic sites are occupied by the R atoms in these compounds. We have synthesized and characterized Dy5Ni2In4 and the two new isotypic compounds Tb5Ni2In4 and Y5Ni2In4. So far, none of the physical properties have been reported on any of these phases; in this article we report on the physical properties of the Dy5Ni2In4 and the crystal structure of Tb5Ni2In4 and Y5Ni2In4 compounds. Measurements of the magnetic properties performed on Dy5Ni2In4 show a ferromagnetic-like ordering with a T-C approximate to 105 K, followed by multiple magnetic orderings at lower temperatures. The fit of the inverse susceptibility in the paramagnetic state follows the Curie-Weiss law, where mu(eff). - 10.3 mu(B)/Dy-atom (close to theoretical value of 10.64 mu(B) for the free ion Dy3+) and a positive paramagnetic Curie temperature theta(p) - 58 K. Ni atoms are most likely to be nonmagnetic. The heat capacity also shows three peaks: a large one at 103K and two weaker at 12 and 8 K, respectively; the in-field heat capacity data corroborate these results, suggesting ferromagnetic and antiferromagnetic orderings at the temperature of 103 and 12 K, respectively. Low temperature x-ray diffraction has shown that the compound does not undergo any structural change down to 5K. (C) 2012 American Institute of Physics

36 MATERIALS SCIENCE↗

Seismicity and structure of Akutan and Makushin Volcanoes, Alaska, using joint body and surface wave tomography

Joint inversions of seismic data recover models that simultaneously fit multiple constraints while playing upon the strengths of each data type. Here, we jointly invert 14 years of local earthquake body wave arrival times from the Alaska Volcano Observatory catalog and Rayleigh wave dispersion curves based upon ambient noise measurements for local V p , V s , and hypocentral locations at Akutan and Makushin Volcanoes using a new joint inversion algorithm.The velocity structure and relocated seismicity of both volcanoes are significantly more complex than many other volcanoes studied using similar techniques. Seismicity is distributed among several areas beneath or beyond the flanks of both volcanoes, illuminating a variety of volcanic and tectonic features. The velocity structures of the two volcanoes are exemplified by the presence of narrow high-V p features in the near surface, indicating likely current or remnant pathways of magma to the surface. A single broad low-V p region beneath each volcano is slightly offset from each summit and centered at approximately 7 km depth, indicating a potential magma chamber, where magma is stored over longer time periods. Differing recovery capabilities of the Vp and Vs datasets indicate that the results of these types of joint inversions must be interpreted carefully.

58 GEOSCIENCES↗

Study of the all orders multiplicative renormalizability of a local confining quark action in the Landau gauge

The inverse of the Faddeev–Popov operator plays a pivotal role within the Gribov–Zwanziger approach to the quantization of Euclidean Yang–Mills theories in Landau gauge. Following a recent proposal (Capri et al., 2014), we show that the inverse of the Faddeev–Popov operator can be consistently coupled to quark fields. Such a coupling gives rise to a local action while reproducing the behaviour of the quark propagator observed in lattice numerical simulations in the non-perturbative infrared region. By using the algebraic renormalization framework, we prove that the aforementioned local action is multiplicatively renormalizable to all orders.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Learning-Based Inversion-Free Model-Data Integration to Advance Ecosystem Model Prediction

Ecosystem model prediction is important for understanding ecosystem responses to climate change and for management support. Model prediction and quantification of predictive uncertainty of ecosystems have long been investigated. The traditional workflow, which calibrates models to match observations and then uses the calibrated models for predictions, relies heavily on inverse modeling to constrain uncertain parameters in complex forward models. This inversion-based prediction approach is infeasible for complex models with heterogeneous parameter uncertainties and incapable of rapid integration of streaming and multiple sources of data because of the difficulty and computational cost in the model inversion, which is typically ill-posed and can require hundreds of thousands of expensive forward simulations to be performed iteratively. We propose to circumvent inverse modeling by precomputing an ensemble of unconstrained forward simulations and then using machine learning (ML) methods to learn the statistical relationship between simulated observation and prediction quantities. Once the ML model has learned the relationship, it can be used to make predictions of future system behavior with uncertainty quantification based on observations. The proposed learningbased inversion-free model prediction (LIMP) framework is computationally efficient which only requires a few thousands of fully parallelizable forward simulations. Additionally, LIMP can continually update predictions based on streaming observations from multiple locations and sources without necessarily requiring extra model simulations. In this study, we apply LIMP to a regional terrestrial ecosystem model with 47 parameters for testing, refining, and evaluating the approach. We demonstrate that LIMP can be used for efficient model prediction, rapid data assimilation, and cost-effective experimental design for improving robust predictive understanding of ecosystems.

Lu, Dan↗

Elastic full-waveform inversion and parameterization analysis applied to walk-away vertical seismic profile data for unconventional (heavy oil) reservoir characterization

We report seismic full-waveform inversion (FWI) methods hold strong potential to recover multiple subsurface elastic properties for hydrocarbon reservoir characterization. Simultaneously updating multiple physical parameters introduces the problem of interparameter tradeoff, arising from the covariance between different physical parameters, which increases nonlinearity and uncertainty of multiparameter FWI. The coupling effects of different physical parameters are significantly influenced by model parameterization and acquisition arrangement. An appropriate choice of model parameterization is critical to successful field data applications of multiparameter FWI. The objective of this paper is to examine the performance of various model parameterizations in isotropic-elastic FWI with walk-away vertical seismic profile (W-VSP) dataset for unconventional heavy oil reservoir characterization. Six model parameterizations are considered: velocity-density (α, β and ρ'), modulus-density (κ, μ and ρ), Lamé-density (λ, μ' and ρ'''), impedance-density (IP, IS and ρ''), velocity-impedance-I (α', β' and I' P ), and velocity-impedance-II (α'', β'' and I'S). We begin analyzing the interparameter tradeoff by making use of scattering radiation patterns, which is a common strategy for qualitative parameter resolution analysis. In this paper, we discuss the advantages and limitations of the scattering radiation patterns and recommend that interparameter tradeoffs be evaluated using interparameter contamination kernels, which provide quantitative, second-order measurements of the interparameter contaminations and can be constructed efficiently with an adjoint-state approach. Synthetic W-VSP isotropic-elastic FWI experiments in the time domain verify our conclusions about interparameter tradeoffs for various model parameterizations. Density profiles are most strongly influenced by the interparameter contaminations; depending on model parameterization, the inverted density profile can be over-estimated, under-estimated or spatially distorted. Among the six cases, only the velocity-density parameterization provides stable and informative density features not included in the starting model. Field data applications of multicomponent W-VSP isotropic-elastic FWI in the time domain were also carried out. Finally, the heavy oil reservoir target zone, characterized by low α-to-β ratios and low Poisson’s ratios, can be identified clearly with the inverted isotropic-elastic parameters.

58 GEOSCIENCES↗

Actinide inverse trans influence versus cooperative pushing from below and multi-center bonding

Actinide-ligand bonds with high multiplicities remain poorly understood. Decades ago, an effect known as 6p pushing from below (PFB) was proposed to enhance actinide covalency. A related effect—also poorly understood—is inverse trans influence (ITI). The present computational study of actinide-ligand covalent interactions with high bond multiplicities quantifies the energetic contributions from PFB and identifies a hitherto overlooked fourth bonding interaction for 2nd-row ligands in the studied organometallic systems. The latter are best described by a terminal O/N ligand exhibiting quadruple bonding interactions with the actinide. The 4th interaction may be characterized as a multi-center or charge-shift bond involving the trans ligand. It is shown in this work that the 4th bonding interaction is a manifestation of ITI, assisted by PFB, and provides a long-sought missing piece in the understanding of actinide chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Entropy-Bayesian Inversion of Time-Lapse Tomographic GPR data for Monitoring Dielectric Permittivity and Soil Moisture Variations

In this study, we evaluate the possibility of monitoring soil moisture variation using tomographic ground penetrating radar travel time data through Bayesian inversion, which is integrated with entropy memory function and pilot point concepts, as well as efficient sampling approaches. It is critical to accurately estimate soil moisture content and variations in vadose zone studies. Many studies have illustrated the promise and value of GPR tomographic data for estimating soil moisture and associated changes, however, challenges still exist in the inversion of GPR tomographic data in a manner that quantifies input and predictive uncertainty, incorporates multiple data types, handles non-uniqueness and nonlinearity, and honors time-lapse tomograms collected in a series. To address these challenges, we develop a minimum relative entropy (MRE)-Bayesian based inverse modeling framework that non-subjectively defines prior probabilities, incorporates information from multiple sources, and quantifies uncertainty. The framework enables us to estimate dielectric permittivity at pilot point locations distributed within the tomogram, as well as the spatial correlation range. In the inversion framework, MRE is first used to derive prior probability distribution functions (pdfs) of dielectric permittivity based on prior information obtained from a straight-ray GPR inversion. The probability distributions are then sampled using a Quasi-Monte Carlo (QMC) approach, and the sample sets provide inputs to a sequential Gaussian simulation (SGSim) algorithm that constructs a highly resolved permittivity/velocity field for evaluation with a curved-ray GPR forward model. The likelihood functions are computed as a function of misfits, and posterior pdfs are constructed using a Gaussian kernel. Inversion of subsequent time-lapse datasets combines the Bayesian estimates from the previous inversion (as a memory function) with new data. The memory function and pilot point design takes advantage of the spatial-temporal correlation of the state variables. We first apply the inversion framework to a static synthetic example and then to a time-lapse GPR tomographic dataset collected during a dynamic experiment conducted at the Hanford Site in Richland, WA. We demonstrate that the MRE-Bayesian inversion enables us to merge various data types, quantify uncertainty, evaluate nonlinear models, and produce more detailed and better resolved estimates than straight-ray based inversion; therefore, it has the potential to improve estimates of inter-wellbore dielectric permittivity and soil moisture content and to monitor their temporal dynamics more accurately.

58 GEOSCIENCES↗

Entropy-Bayesian Inversion of Time-Lapse Tomographic GPR data for Monitoring Dielectric Permittivity and Soil Moisture Variations

In this study, we evaluate the possibility of monitoring soil moisture variation using tomographic ground penetrating radar travel time data through Bayesian inversion, which is integrated with entropy memory function and pilot point concepts, as well as efficient sampling approaches. It is critical to accurately estimate soil moisture content and variations in vadose zone studies. Many studies have illustrated the promise and value of GPR tomographic data for estimating soil moisture and associated changes, however, challenges still exist in the inversion of GPR tomographic data in a manner that quantifies input and predictive uncertainty, incorporates multiple data types, handles non-uniqueness and nonlinearity, and honors time-lapse tomograms collected in a series. To address these challenges, we develop a minimum relative entropy (MRE)-Bayesian based inverse modeling framework that non-subjectively defines prior probabilities, incorporates information from multiple sources, and quantifies uncertainty. The framework enables us to estimate dielectric permittivity at pilot point locations distributed within the tomogram, as well as the spatial correlation range. In the inversion framework, MRE is first used to derive prior probability density functions (pdfs) of dielectric permittivity based on prior information obtained from a straight-ray GPR inversion. The probability distributions are then sampled using a Quasi-Monte Carlo (QMC) approach, and the sample sets provide inputs to a sequential Gaussian simulation (SGSIM) algorithm that constructs a highly resolved permittivity/velocity field for evaluation with a curved-ray GPR forward model. The likelihood functions are computed as a function of misfits, and posterior pdfs are constructed using a Gaussian kernel. Inversion of subsequent time-lapse datasets combines the Bayesian estimates from the previous inversion (as a memory function) with new data. The memory function and pilot point design takes advantage of the spatial-temporal correlation of the state variables. We first apply the inversion framework to a static synthetic example and then to a time-lapse GPR tomographic dataset collected during a dynamic experiment conducted at the Hanford Site in Richland, WA. We demonstrate that the MRE-Bayesian inversion enables us to merge various data types, quantify uncertainty, evaluate nonlinear models, and produce more detailed and better resolved estimates than straight-ray based inversion; therefore, it has the potential to improve estimates of inter-wellbore dielectric permittivity and soil moisture content and to monitor their temporal dynamics more accurately.

Bayesian Inversion↗

Experimental validation of GADRAS's coupled neutron-photon inverse radiation transport solver.

Sandia National Laboratories has developed an inverse radiation transport solver that applies nonlinear regression to coupled neutron-photon deterministic transport models. The inverse solver uses nonlinear regression to fit a radiation transport model to gamma spectrometry and neutron multiplicity counting measurements. The subject of this paper is the experimental validation of that solver. This paper describes a series of experiments conducted with a 4.5 kg sphere of {alpha}-phase, weapons-grade plutonium. The source was measured bare and reflected by high-density polyethylene (HDPE) spherical shells with total thicknesses between 1.27 and 15.24 cm. Neutron and photon emissions from the source were measured using three instruments: a gross neutron counter, a portable neutron multiplicity counter, and a high-resolution gamma spectrometer. These measurements were used as input to the inverse radiation transport solver to evaluate the solver's ability to correctly infer the configuration of the source from its measured radiation signatures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Desorption Kinetics of Ar, Kr, Xe, N2, O2, CO, Methane, Ethane, and Propane from Graphene and Amorphous Solid Water Surfaces

The desorption kinetics for Ar, Kr, Xe, N2, O2, CO, methane, ethane, and propane from grapheme covered Pt(111) and amorphous solid water (ASW) surfaces are investigated using temperature programmed desorption (TPD). The TPD spectra for all of the adsorbates from graphene have well-resolved first, second, third, and multi- layer desorption peaks. The alignment of the leading edges is consistent the zero-order desorption for all of the adsorbates. An Arrhenius analysis is used to obtain desorption energies and prefactors for desorption from graphene for all of the adsorbates. In contrast, the leading desorption edges for the adsorbates from ASW do not align (for coverages < 2 ML). The non-alignment of TPD leading edges suggests that there are multiple desorption binding sites on the ASW surface. Inversion analysis is used to obtain the coverage dependent desorption energies and prefactors for desorption from ASW for all of the adsorbates.

Environmental Molecular Sciences Laboratory↗

Atomically smooth and homogeneously N-polar AlN film grown on silicon by alumination of Si{sub 3}N{sub 4}

By using an alumination process of Si{sub 3}N{sub 4} at high temperature with aluminum flux irradiation for sufficient time, homogeneously N-polar and atomically smooth AlN film has been realized on silicon substrate with inversion domain suppressed to less than 3.0 Multiplication-Sign 10{sup 6} cm{sup -2} and root mean square surface roughness of {approx}0.4 nm. A general interface model is proposed to explain the mechanism of polarity determination. The sharp AlN(0001)/Si(111) interface exhibits 5:4 coincidence domain matching, resulting in an almost fully relaxed AlN film.

36 MATERIALS SCIENCE↗