SEARCH · Search NASA
Results for “LEO”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Influence of Copper Composition on Cu 2 BaSn(S,Se) 4 Solution-Deposited Films and Photovoltaic Devices with Over 5% Efficiency
Cu 2 BaSn(S,Se) 4 is currently in the spotlight for prospective environmentally friendly, stable, thin-film solar cell application, with demonstrated device power conversion efficiency (PCE) exceeding 5% for vacuum-deposited absorbers. As suggested by first-principles calculations, experimental studies involving related Cu 2 ZnSn(S,Se) 4 and Cu(In,Ga)(S,Se) 2 absorbers prove that the detailed chemical composition typically plays a sensitive role in altering defects and electronic properties of these complicated compound semiconductors. Herein, the copper composition of Cu 2 BaSn(S,Se) 4 has been systematically modified, employing a solution-based deposition approach, to provide a more complete picture of the phase stability and optoelectronic property sensitivity for this material. X-ray diffraction and scanning electron microscopy show that phase purity is preserved over a film Cu content range of nominally 0.94 ≤ [Cu]/[Ba + Sn] ≤ 1.01. Terahertz spectroscopy and Hall effect measurements reveal that the majority carrier hole density of ~10 13 cm –3 and mobility (~5 cm 2 /V s), as well as the minority carrier lifetime (a bulk lifetime of 180 ps and a surface recombination velocity >106 cm/s), are nominally independent of Cu content. The champion PCEs exceed 4.7% for all copper compositions in the phase-pure region, with a record value of 5.1%, similar to the reported values for record vacuum-deposited devices. Furthermore, these results suggest that Cu 2 BaSn(S,Se) 4 films and solar cells (at the current performance level) may be less sensitive to Cu stoichiometry compared to kesterite materials and therefore may provide a more stable material platform to prepare thin-film solar cells.
Molten Sodium Penetration in NaSICON Electrolytes at 0.1 A cm –2
High-conductivity solid electrolytes, such as the Na superionic conductor, NaSICON, are poised to play an increasingly important role in safe, reliable battery-based energy storage, enabling advanced sodium-based batteries. Coupled demands of increased current density (≥0.1 A cm –2 ) and low-temperature (<200 °C) operation, combined with increased discharge times for long-duration storage (>12 h), challenge the limitations of solid electrolytes. Here, we explore the penetration of molten sodium into NaSICON at high current densities. Previous studies of β"-alumina proposed that Poiseuille pressure-driven cracking (mode I) and recombination of ions and electrons within the solid electrolyte (mode II) are the two main mechanisms for Na penetration, but a comprehensive study of Na penetration in NaSICON is necessary, particularly at high current density. To further understand these modes, this work employs unidirectional galvanostatic testing of Na|NaSICON|Na symmetric cells at 0.1 A cm –2 over 23 h at 110 °C. Further, while galvanostatic testing shows a relatively constant yet increasingly noisy voltage profile, electrochemical impedance spectroscopy (EIS) reveals a significant decrease in cell impedance correlated with significant sodium penetration, as observed in scanning electron microscopy (SEM). Further SEM analysis of sodium accumulation within NaSICON suggests that mode II failure may be far more prevalent than previously considered. Further, these findings suggest that total (dis)charge density (mAh cm –2 ), as opposed to current density (mA cm –2 ), may be a more critical parameter when examining solid electrolyte failure, highlighting the challenge of achieving long discharge times in batteries using solid electrolytes. Together, these results provide a better understanding of the limitations of NaSICON solid electrolytes under high current and emphasize the need for improved electrode–electrolyte interfaces.
Can a Coating Mitigate Molten Na Dendrite Growth in NaSICON Under High Current Density?
Alkali metals are among the most desirable negative electrodes for long duration energy storage due to their extremely high capacities. Currently, only high-temperature (>250 °C) batteries have successfully used alkali electrodes in commercial applications, due to limitations imposed by solid electrolytes, such as low conductivity at moderate temperatures and susceptibility to dendrites. Toward enabling the next generation of grid-scale, long duration batteries, we aim to develop molten sodium (Na) systems that operate with commercially attractive performance metrics including high current density (>100 mA cm –2 ), low temperature (<200 °C), and long discharge times (>12 h). In this work, we focus on the performance of NaSICON solid electrolytes in sodium symmetric cells at 110 °C. Specifically, we use a tin (Sn) coating on NaSICON to reduce interfacial resistance by a factor of 10, enabling molten Na symmetric cell operation with “discharge” durations up to 23 h at 100 mA cm –2 and 110 °C. Unidirectional galvanostatic testing shows a 70% overpotential reduction, and electrochemical impedance spectroscopy (EIS) highlights the reduction in interfacial resistance due to the Sn coating. Detailed scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) show that Sn-coated NaSICON enables current densities of up to 500 mA cm –2 at 110 °C by suppressing dendrite formation at the plating interface (Mode I). In conclusion, this analysis also provides a mechanistic understanding of dendrite formation at current densities up to 1000 mA cm –2 , highlighting the importance of effective coatings that will enable advanced battery technologies for long-term energy storage.
Performance Leap of Lithium Metal Batteries in LiPF 6 Carbonate Electrolyte by a Phosphorus Pentoxide Acid Scavenger
Phosphorus pentoxide (P 2 O 5 ) is investigated as an acid scavenger to remove the acidic impurities in a commercial lithium hexafluorophosphate (LiPF 6 ) carbonate electrolyte to improve the electrochemical properties of Li metal batteries. Nuclear magnetic resonance (NMR) measurements reveal the detailed reaction mechanisms of P 2 O 5 with the LiPF 6 electrolyte and its impurities, which removes hydrogen fluoride (HF) and difluor-ophosphoric acid (HPO 2 F 2 ) and produces phosphorus oxyfluoride (POF 3 ), OF 2 P-O-PF 5 - anions, and ethyl difluorophosphate (C 2 H 5 OPOF 2 ) as new electrolyte species. The P 2 O 5 -modified LiPF 6 electrolyte is chemically compatible with a Li metal anode and LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathode, generating a PO x F y -rich solid electrolyte interphase (SEI) that leads to highly reversible Li electrodeposition, while eliminating transition metal dissolution and cathode particle cracking. The excellent electrochemical properties of the P 2 O 5 -modified LiPF6 electrolytes are demonstrated on Li||NMC622 pouch cells with 0.4 Ah capacity, 50 mu m Li anode, 3 mAh cm -2 NMC622 cathode, and 3 g Ah -1 electrolyte/capacity ratio. The pouch cells can be galvanostatically cycled at C/3 for 230 cycles with 87.7% retention.
Impedance-Based Detection of NO 2 Using Ni-MOF-74: Influence of Competitive Gas Adsorption
Chemically robust, low-power sensors are needed for the direct electrical detection of toxic gases. Metal–organic frameworks (MOFs) offer exceptional chemical and structural tunability to meet this challenge, though further understanding is needed regarding how coadsorbed gases influence or interfere with the electrical response. To probe the influence of competitive gases on trace NO 2 detection in a simulated flue gas stream, a combined structure–property study integrating synchrotron powder diffraction and pair distribution function analyses was undertaken, to elucidate how structural changes associated with gas binding inside Ni-MOF-74 pores correlate with the electrical response from Ni-MOF-74-based sensors. Data were evaluated for 16 gas combinations of N 2 , NO 2 , SO 2 , CO 2 , and H 2 O at 50 °C. Fourier difference maps from a rigid-body Rietveld analysis showed that additional electron density localized around the Ni-MOF-74 lattice correlated with large decreases in Ni-MOF-74 film resistance of up to a factor of 6 × 10 3 , observed only when NO 2 was present. These changes in resistance were significantly amplified by the presence of competing gases, except for CO 2 . Without NO 2 , H 2 O rapidly (<120 s) produced small (1–3×) decreases in resistance, though this effect could be differentiated from the slower adsorption of NO 2 by the evaluation of the MOF’s capacitance. Furthermore, samples exposed to H 2 O displayed a significant shift in lattice parameters toward a larger lattice and more diffuse charge density in the MOF pore. Evaluating the Ni-MOF-74 impedance in real time, NO 2 adsorption was associated with two electrically distinct processes, the faster of which was inhibited by competitive adsorption of CO 2 . Together, this work points to the unique interaction of NO 2 and other specific gases (e.g., H 2 O, SO 2 ) with the MOF’s surface, leading to orders of magnitude decrease in MOF resistance and enhanced NO2 detection. Finally, understanding and leveraging these coadsorbed gases will further improve the gas detection properties of MOF materials.
Exceptional Electrical Detection of Trace NO 2 via Mixed Metal MOF-on-MOF Film-Based Sensors
The tunability of metal–organic frameworks (MOFs) makes them exceptional materials for the development of highly selective, low-power sensors for toxic gas detection. Herein, we demonstrate enhanced detection of NO 2 gas by a MOF-based electrical impedance sensor made using a unique mixed metal MOF-on-MOF synthesis. For this work, a combined experimental and computational study was performed using the exemplar Ni x Mg 1–x -MOF-74 to understand the fundamental structure–property relationships behind metal mixing and MOF film synthesis methods on sensor performance. Density functional theory results indicated that the presence of Ni in Mg-MOF-74 increased framework stability and increased the electron density of states at lower energies near the HOMO, as well as enhanced the NO 2 –Mg adsorption interaction. Impedance data of the Ni x Mg 1–x -MOF-74 films with larger Ni contents showed greater impedance change after exposure to 1 ppm of NO 2 gas. Furthermore, when synthesized through either a drop-cast or direct solvothermal film growth approach, the monometallic Ni-based sensors had the best performance. However, the mixed metal Ni x Mg 1–x -MOF-74 sensors synthesized through a MOF-on-MOF approach resulted in the highest impedance change, outperforming all monometallic Ni-based sensors. In particular, the mixed metal Ni-on-Mg-MOF-74 film was the best-performing sensor with an impedance change of 309 upon trace NO 2 exposure. Change in impedance response after NO 2 exposure was improved by 52% compared to the best monometallic Ni-on-Ni-MOF-74 sensor. Structural analysis of the Ni-on-Mg film showed that the first Mg-MOF-74 layer acts as a structural template controlling the structural features of the final film after metal exchange with Ni. This led to improved film quality, evidenced by the greater crystallinity and larger MOF grain sizes, and resulted in enhanced sensor performance which was not achievable through other metal mixing methods. Altogether, this study identifies structure–property relationships and synthetic templating methods that inform MOF-based sensor design, allowing for improved detection of toxic compounds.
Exceptional NH 3 Detection by Cu(cyhdc) MOF Sensor Due to H 2 O Coadsorption
Metal–organic framework (MOF)-based electrical impedance sensors are a growing class of sensors that show utility in the detection of environmentally toxic gases. Detection of trace NH 3 has been particularly difficult to design due to the low electrical response of NH 3 . However, this has been circumvented by judiciously selecting a MOF that has enhanced electrical response to NH 3 due to coadsorption with predominant atmospheric gases such as water. Herein, an MOF Cu(cyhdc) based sensor has been successfully demonstrated for the enhanced detection of environmentally toxic NH 3 gas. The sensor shows a change in impedance when it is exposed to 5 ppm of NH 3 . At 20 °C, >30% relative humidity (RH) is necessary to elicit a change, with the response increasing with RH and reaching 3170× at 92% RH, producing the largest published response to NH 3 for a MOF direct electrical sensor. In the absence of water, no change is observed toward 5 ppm of NH 3 over 20–50 °C. Here, this electrical response is largely driven by huge decreases in the imaginary component of the impedance, attributed to increased capacitance at the surface of the MOF crystallites upon NH 3 and H 2 O coadsorption. Complementary structural and microstructural characterization proves that the Cu(cyhdc) crystalline structure and morphology remain intact under trace NH 3 and/or H 2 O adsorption. Despite extremely low NH 3 , loadings seen in TGA, XPS, and FT-IR confirm NH 3 and H 2 O adsorption, and changes to the metal-carboxylate IR peak positions are observed upon NH 3 adsorption. Concentrated primarily at the outer surfaces of the MOF crystallites, this NH 3 and H 2 O coadsorption effectively increases the surface capacitance across the Cu(cyhdc) powder and enables direct electrical detection of trace NH 3 . Together, these results demonstrate how coadsorption of specific molecules (H 2 O) can be used to enable the electrical detection of trace toxic gases that would otherwise not have produced a MOF sensor response.
Harnessing Nanobodies for Precision Targeting of Proteoforms: Opportunities and Challenges in Therapeutics and Diagnostics
Proteoforms are biologically distinct yet structurally similar proteins that play key roles in driving disease progression but are rarely accounted for in the development of therapeutics and diagnostics. Nanobodies (Nbs) have emerged as a therapeutic and diagnostic “silver bullet” as they possess unique structural and functional attributes that offer advantages over traditional antibodies. One of the most profound advantages of Nbs is the heightened sensitivity and ability to distinguish subtle changes in the conformation of a given protein. Thus, Nbs have significant potential as therapeutic and diagnostic agents that can identify and distinguish specific pathological proteoforms that underlie a given disease. However, there remain significant challenges in obtaining sufficient quantities and purities of specific proteoform antigens that are required for engineering proteoform-specific Nbs. Recent advancements in chemical biology tools for precision proteoform synthesis have made this task feasible for the first time. In this perspective, we discuss the advantages and challenges associated with developing proteoform-specific Nbs and how success in this endeavor will significantly advance the fields of therapeutics and diagnostics.
An Integral Activity-Based Protein Profiling Method for Higher Throughput Determination of Protein Target Sensitivity to Small Molecules
Activity-based protein profiling (ABPP) is a chemoproteomic technique that uses small molecule probes to label active enzymes selectively and covalently in complex proteomes. Competitive ABPP, which involves treatment of the active proteome with an analyte of interest, is especially powerful for profiling how small molecules impact specific protein activities. Advances in higher throughput workflows have made it possible to generate extensive competitive ABPP data across diverse biological samples, making this approach highly appealing for characterizing shared and unique proteins affected by perturbations such as drug or chemical exposures. To use the competitive ABPP approach effectively to understand potential adverse effects of chemicals of concern (CoC), a wide range of concentrations may be needed, particularly for chemicals that lack potency or toxicity data. In this work, we present an integral competitive ABPP method that enables target sensitivity determination for different organophosphate (OP) pesticides as model toxicants. Using previously developed OP-ABPs, we optimized conditions for tandem mass tag (TMT) multiplexing of ABPP samples and compared conventional competitive ABPP involving samples at discrete paraoxon concentrations to pooled samples across that same concentration range. We then expanded our approach to compare protein target sensitivities toward two additional OP pesticides, chlorpyrifos oxon and malaoxon. The results showed that differences in integral intensities for the pooled competition sample can be used to evaluate the relative sensitivity of specific proteins without increasing the overall number of samples. For 8 CoC concentrations of interest, this strategy reduced the number of TMT plexes and the corresponding number of LC–MS/MS analyses 3-fold. In conclusion, we envision the integral ABPP (IABPP) method will provide a means to screen diverse chemicals more rapidly to identify both high and low sensitivity protein targets.
Operando Label-Free Optical Imaging of Solution-Phase Ion Transport and Electrochemistry
Not Available
Fracture Dynamics in Silicon Anode Solid-State Batteries
Solid-state batteries (SSBs) with silicon anodes could enable improved safety and energy density compared to lithium-ion batteries. However, degradation arising from the massive volumetric changes of silicon anodes during cycling is not well understood in solid-state systems. Here, we use operando X-ray computed microtomography to reveal micro- to macro-scale chemo-mechanical degradation processes of silicon anodes in SSBs. Mud-type channel cracks driven by biaxial tensile stress form across the electrode during delithiation. We also find detrimental cracks at the silicon/ solid electrolyte interface that form due to local reaction competition between neighboring domains of different sizes. Continuum phase-field damage modeling quantifies stress-driven channel cracking and shows that the lithiated silicon stress state is critical for determining the extent of interfacial fracture. This work reveals the mechanisms that govern SSBs compared to conventional lithium-ion batteries and provides guidelines for engineering chemomechanically resilient electrodes for high-energy batteries.
Pathways to High-Performance Salt Hydrate Thermochemical Energy Storage Materials and Systems
Thermochemical materials (TCMs) based on salt hydrates are promising for thermal energy storage as they combine high energy densities with low reaction temperatures. However, their adoption is hindered by poor structural integrity and degradation under hygrothermal cycling. Storage performance is governed not only by the chemical reaction, but also by the coupled thermo-chemo-mechanical behavior that evolves with cycling. Understanding and controlling this coupling across length scales (material-to-reactor) is necessary to improve TCM stability and lifetime. In this perspective, we discuss the shortcomings of current characterization approaches and emphasize the need for measuring transport properties and structural transformations using in situ techniques that capture the dynamic evolution of these materials. We also outline opportunities for multiscale modeling frameworks that link thermodynamics and mechanics, enabling predictive evaluation of composite architectures designed for cycling stability. We conclude by identifying research questions that must be addressed to transform TCMs into viable energy storage technologies.
Chemoproteomic Elucidation of β-Lactam Drug Targets in Mycobacterium abscessus
The pathogen Mycobacterium abscessus (Mab) can cause severe and difficult-to-treat chronic lung infections. Despite the rising incidence and clinical concern of Mab infections, treatment options are limited and often ineffective. Treatment is complicated by Mab’s ability to persist in a nonreplicating, drug-resistant state. Several β-lactam antibiotics are potently bactericidal against Mab but are underutilized because their molecular mechanisms of action against Mab are incompletely understood. In the current study, we used β-lactam-derived activity-based probes and chemoproteomics to report the first comprehensive list of Mab enzymes targeted by β-lactams. We compared β-lactam targets across two Mab subspecies in actively replicating and nonreplicating cultures, using a new carbon starvation model of persistence. We identified 17 targets that were active in every condition tested, seven of which were previously unknown to bind β-lactams. Lastly, we characterized the β-lactamase activity and β-lactam inhibition profiles of nine Mab enzymes, demonstrating that imipenem inhibits these targets more effectively than cefoxitin. These findings demonstrate β-lactam target engagement in persistent Mab and provide clarity on the mechanisms of action of clinically relevant β-lactams in Mab, crucial steps toward fully realizing their potential for treating infections caused by this opportunistic pathogen.
Improved Mechanical Strength without Sacrificing Li-Ion Transport in Polymer Electrolytes
Not provided.
Influence of Water Sorption on Ionic Conductivity in Polyether Electrolytes at Low Hydration
Ion-containing polymers are subject to a wide range of hydration conditions across electrochemical and water treatment applications. Significant work on dry polymer electrolytes for batteries and highly swollen membranes for water purification has informed our understanding of ion transport under extreme conditions. However, knowledge of intermediate conditions (i.e., low hydration) is essential to emerging applications (e.g., electrolyzers, fuel cells, and lithium extraction). Ion transport under low levels of hydration is distinct from the extreme conditions typically investigated, and the relevant physics cannot be extrapolated from existing knowledge, stifling materials design. In this study, we conducted ion transport measurements in LiTFSI-doped polyethers that were systematically hydrated from dry conditions. A semiautomated apparatus that performs parallel measurements of water uptake and ionic conductivity in thin-film polymers under controlled humidity was developed. For the materials and swelling range considered in this study (i.e., <0.07 g water/g dry polymer electrolyte), ionic conductivity depends nonlinearly on water uptake, with the initial sorbed water weakly affecting conductivity. With additional increases in swelling, more significant increases in conductivity were observed. Remarkably, changes in conductivity induced by water sorption were correlated with the number of water molecules per lithium ion, with the normalized molar conductivity of different samples effectively collapsing onto one another until this unit of hydration exceeded the solvation number of lithium ions under aqueous conditions. Furthermore, these results provide important knowledge regarding the effects of trace water contamination on conductivity measurements in polymer electrolytes and demonstrate that the lithium-ion solvation number marks a key transition point regarding the influence of water on ion transport in ion-containing polymers.
What is the Role of Relative Humidity on Conductivity in Polymer Electrolytes?
Ion transport properties in polymer electrolytes have been widely studied under rigorously dry and highly water-swollen conditions. However, the transition between these extremes, i.e., the low hydration regime, is still poorly understood at the molecular level and relevant to applications ranging from battery electrolytes to electrophoretic separations. Here, in this study, we apply atomistic molecular dynamics simulations to probe the role of hydration on ion mobilities and conductivities in LiTFSI-doped polyethers at low water content (less than 10% water by volume), which corresponds to 0−80% relative humidity conditions. With increasing water content, Li + ions exhibit two distinct regimes in their mobilities. At low water content, the majority of the Li + ions are weakly hydrated (two or fewer water molecules per Li + ion), maintaining strong interactions with their polymer solvation cage, and therefore exhibit only a weak increase in mobility relative to dry conditions. As water content increases, Li + ions form complete hydration shells, residing within water-rich domains that promote faster mobilities. Further, Li + mobilities increase more significantly in polymer electrolytes composed of more hydrophilic polymers and higher salt concentrations due to the formation of larger water-rich domains. In contrast, TFSI − has comparatively weak interactions with both the polymer and water, exhibiting a monotonic increase in mobility as a function of water content. Overall, these results help clarify the molecular mechanisms underlying ionic mobilities and conductivities in polymer electrolytes at low water content.