SEARCH · Search NASA

Results for “LITHIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1982

The /A 1 Sigma +/ - /X 1 Sigma +/ system of the isotopic lithium hydrides - The molecular constants, potential energy curves, and their adiabatic corrections

The molecular constants and their adiabatic corrections have been determined for the (A 1 Sigma +) - (X 1 Sigma +) system of the isotopic lithium hydrides: (Li-6)H, (Li-7)H, (Li-6)D, and (Li-7)D. Using a fully quantum mechanical variational method, the potential energy curves (IPA potentials) are determined. Extending the variational method, we have obtained for the first time adiabatic corrections of potential energy curves from isotopic spectroscopic data. A significant difference between the potential energy curves of the lithium hydrides and the lithium deuterides has been observed. When Li-6 was replaced by Li-7, a significant difference was only observed for the (A 1 Sigma +) state, but not for the (X 1 Sigma +) state.

Vidal, C. R.↗

NASA NTRS1983

Policies governing the use of lithium batteries in the Navy

Lithium batteries offer many advantages for Navy systems but may also exhibit undesirable hazardous behavior. Safety problems have been traced to a variety of chemical and physical causes. The Navy has established a central safety office with responsibility for all lithium battery use. Before an item is approved for Navy use, it must pass both a design review and a set of end item tests. These reviews focus on complete systems which include a battery inside the end item. After system approval, specific regulations govern the transportation, storage, and disposal of the unit containing lithium batteries. Each of these areas is discussed in detail.

Bis, R. F.↗

NASA NTRS1984

Collective capture of released lithium ions in the solar wind

The capture of newly ionized lithium ions in the solar wind by means of electromagnetic instabilities is investigated through linear analysis and computer simulation. Three instabilities, driven by a lithium velocity ring perpendicular to and drifting along the magnetic field, are considered. The capture time of the lithium by the solar wind is roughly 10 linear growth times, regardless of whether resonant or nonresonant modes dominate initially. Possible implications of the results for the Active Magnetosphere Particle Tracer Explorer (AMPTE) mission are discussed.

Winske, D.↗

NASA NTRS1985

RAY-O-VAC BR2325 Lithium Carbon Monofluoride Cell Performance

RAY-O-VAC currently markets a 160 mAH lithium cell recommended for usage in watch and calculator products. The lithium carbon monofluoride cell offers an extended shelf life with no reduction in performance effectiveness. The BR2325 cell has aerospace applications for memory devices and telemetry systems. Over one hundred thirty (130) cells were purchased and tested for evaluation purposes. The test statistics and overall cell performance of the RAY-O-VOC BR2325 lithium carbon monofluoride cell is reviewed.

Mcdermott, J. K.↗

NASA NTRS1986

Safety considerations for fabricating lithium battery packs

Lithium cell safety is a major issue with both manufacturers and end users. Most manufacturers have taken great strides to develop the safest cells possible while still maintaining performance characteristics. The combining of lithium cells for higher voltages, currents, and capacities requires the fabricator of lithium battery packs to be knowledgable about the specific electrochemical system being used. Relatively high rate, spirally wound (large surface area) sulfur oxychloride cells systems, such as Li/Thionyl or Sulfuryl chloride are considered. Prior to the start of a design of a battery pack, a review of the characterization studies for the cells should be conducted. The approach for fabricating a battery pack might vary with cell size.

Ciesla, J. J.↗

NASA NTRS1988

Environment assisted degradation mechanisms in aluminum-lithium alloys

Section 1 of this report records the progress achieved on NASA-LaRC Grant NAG-1-745 (Environment Assisted Degradation Mechanisms in Al-Li Alloys), and is based on research conducted during the period April 1 to November 30, 1987. A discussion of work proposed for the project's second year is included. Section 2 provides an overview of the need for research on the mechanisms of environmental-mechanical degradation of advanced aerospace alloys based on aluminum and lithium. This research is to provide NASA with the basis necessary to permit metallurgical optimization of alloy performance and engineering design with respect to damage tolerance, long term durability and reliability. Section 3 reports on damage localization mechanisms in aqueous chloride corrosion fatigue of aluminum-lithium alloys. Section 4 reports on progress made on measurements and mechanisms of localized aqueous corrosion in aluminum-lithium alloys. Section 5 provides a detailed technical proposal for research on environmental degradation of Al-Li alloys, and the effect of hydrogen in this.

Gangloff, Richard P.↗

NASA NTRS1986

Performance and properties of arsenic passivated lithium-titanium disulfide cells

In order to inhibit chemical degradation associated with the lithium-electrolyte interaction in ambient temperature lithium cells, an attempt was made to synthetically passivate the anode via ion implantation of arsenic. Solvent reduction is reduced although salt reaction with lithium is still present. The performance of the Li-TiS2 cell differs from those with standard electrodes, but further work is necessary to clarify the efficacy of this mode of passivation.

Yen, S. P. S.↗

NASA NTRS1988

Simulation and non-linear stage of the electrostatic waves observed during the AMPTE lithium release in the solar wind

During the AMPTE lithium releases in the solar wind intense electrostatic waves with frequencies between a few tens of Hz to several kHz were observed outside the diamagnetic cavity. The results of linear Vlasov theory have suggested that these waves may be generated through two types of instabilities. One is the ion-ion instability associated with the relative drift between the lithium ions and the solar wind protons, and the other is the ion-acoustic instability due to the relative drift between the electrons and the ions. In order to look at the non-linear behavior of the wave-particle interactions, and discern the effect of waves on the particles, full particle electrostatic simulations have been performed, and the results are presented here. It is shown that the ion-ion instability whose phase velocity is oblique to the solar wind velocity can cause considerable anisotropic 'heating' of both the lithium ions and the solar wind protons.

Omidi, N.↗

NASA NTRS1988

Low temperature safety of lithium-thionyl chloride cells

The use of lithium thionyl chloride cells for low-temperature applications is presently restricted because of their unsafe behavior. An attempt is made in the present investigation to identify the safe/unsafe low temperature operating conditions and to understand the low temperature cell chemistry responsible for the unsafe behavior. Cells subjected to extended reversal at low rate and -40 C were found to explode upon warm-up. Lithium was found to deposit on the carbon cathodes during reversal. Warming up to room temperature may be accelerating the lithium corrosion in the electrolyte. This may be one of the reasons for the cell thermal runaway.

Subbarao, S.↗

NASA NTRS1991

Lithium Cells Accept Hundreds Of Recharges

New mixed-solvent electrolyte increases number of times room-temperature lithium cell discharged and recharged. Conductivity 70 percent higher. Useful in such other room-temperature rechargeable lithium cells as lithium/niobium triselenide and lithium molybdenum disulfide systems.

Shen, David H.↗

NASA NTRS1990

The AMPTE lithium releases in the solar wind - A possible trigger for geomagnetic pulsations

Shortly after the AMPTE/IRM satellite had released Lithium ions into the solar wind, magnetometers on the ground and in the frontside magnetosphere observed deflections of a type similar to those associated with solar wind pressure pulses. Since the natural solar wind was very stable during this event and did not exhibit pressure changes, the magnetic deflections have likely been caused by the artificially injected Lithium cloud when it hit the magnetosphere. Order of magnitude estimates show that 300 g of Lithium vapor released in the solar wind are indeed able to produce a 300 nT magnetic deflection on the ground under favorable conditions.

Luehr, Hermann↗

NASA NTRS1990

Reactivity of nonaqueous organic electrolytes towards lithium

The successful operation of an ambient temperature secondary lithium cell is primarily dependent on the stability of the electrolyte towards lithium. The lithium electrode on open circuit must be inert towards the electrolyte to achieve a long shelf life. The reactivity of tetrahydrofuran and 2-methyltetrahydrofuran based electrolytes with additives such as 2-methylfuran, ethylene carbonate, propylene carbonate, and 3-methylsulfolane was investigated by microcalorimetry and ac impedance spectroscopy techniques. Also the stability of electrolytes by open circuit stand tests was studied. Addition of ethylene carbonate and 2-methylfuran additives was found to improve the stability of tetrahydrofuran and 2-methyltetrahydrofuran based electrolytes. Long term microcalorimetry and ac impedance data clearly confirmed the higher stability of ethylene carbonate/2-methyltetrahydrofuran electrolyte compared to the 2-methyltetrahydrofuran and propylene carbonate/2-methyltetrahydrofuran electrolytes.

Shen, D. H.↗

NASA NTRS1991

Development of a 300 Amp-hr high rate lithium thionyl chloride cell

The development of a high-rate lithium thionyl chloride cylindrical cell with parallel plate electrodes is discussed. The development was divided into three phases: phase 1, a 150 Amp/hour low rate (1 mA/sq cm) design; phase 2, a 25 Amp/hour high rate (5 mA/sq cm) design; and phase 3, a 300 Amp/hour high rate (5 mA/sq cm) design. The basic design is the same for all three cells. The electrodes are perpendicular to the axis of the cylinder. Multiple electrodes are bussed up the side of the cylinder, 180 deg apart allowing excellent anode and cathode utilization. It is a lithium limited design with excess electrolyte. The cathode is Shawinigan or Gulf Acetylene black with no catalyst. The electrolyte is 1.8 Molar lithium tetrachloroaluminate (LiAlCl4) in thionyl chloride. All cell cases are 304L Stainless Steel with a BS&B burst disc.

Boyle, Gerard H.↗

NASA NTRS1992

Kinetics of intercalation of lithium into NbSe3 and TiS2 cathodes

Titanium disulfide and niobium triselenide are two well-studied candidate materials for positive electrodes in rechargeable lithium cells. A comparative study of the kinetics of intercalation of lithium in both the cathodes is made here based on various electrochemical techniques, i.e., linear polarization, potentiodynamic polarization, and ac impedance under different experimental conditions such as prismatic or disk configuration of fresh, partially discharged, or cycled electrode. Further, the diffusion coefficients of lithium ions in these cathodes are estimated under these conditions using conventional techniques, i.e., ac impedance, chronocoulometry, chronoamperometry, and current pulse relaxation. Based on the values of the diffusion coefficients, the applicability of these methods for the determination of diffusion coefficients is discussed.

Ratnakumar, B. V.↗

NASA NTRS1992

Mass loss and a possible Population II lithium dip

It is shown that the recent observation of a subplateau lithium abundance for a high-surface-temperature Population II star relative to the Population II lithium plateau can be explained by main-sequence mass loss. This explanation is identical to a previously proposed explanation for the Population I lithium dip and predicts a similar dip for Population II. It is assumed that the main-sequence mass loss in both cases is associated with the instability strip intersecting the main sequence. This mass-loss process can also decrease globular cluster ages by about 1 Gyr.

Dearborn, David S. P.↗

NASA NTRS1991

Observations of the freeze/thaw performance of lithium fluoride by motion picture photography

To gain direct observation of the molten salt phase change, a novel containerless technique was developed where the high surface tension of lithium fluoride was used to suspend a bead of the molten salt inside a specially designed wire cage. By varying the current passing through the wire, the cage also served as a variable heat source. In this way, the freeze/thaw performance of the lithium fluoride could be photographed by motion picture photography without the influence of container walls. The motion picture photography of the lithium fluoride sample revealed several zones during the phase change, a solid zone and a liquid zone, as expected, and a slush zone that was predicted by thermal analysis modeling.

Jaworske, D. A.↗

NASA NTRS1991

Control of internal and external short circuits in lithium batteries using a composite thermal switch

A composite material has been developed, consisting of a blend of metal and fluorocarbon particles, which behaves as an electronic conductor at room temperature and which abruptly becomes an insulator at a predetermined temperature. This switching behavior results from the difference in thermal expansion coefficients between the conductive and non-conductive portions of the composite. This material was applied as a thin film between the carbon cathode in Li/SOCl2 cells, and the metallic cathode current collector. Using test articles incorporating this feature it was shown that lithium cells externally heated or internally heated during a short circuit lost rate capability and the ability to overheat well below the melting point of lithium (180 C). Thus, during an internal or external cell short circuit, the potential for thermal runaway involving reactions of molten lithium is avoided.

Mcdonald, Robert C.↗

NASA NTRS1993

Evidence for a dispersion in the lithium abundances of extreme halo stars

Evidence is presented to the effect that there exists a small dispersion in the lithium abundances of extreme halo dwarfs. This dispersion cannot be accounted for by standard stellar models alone, particularly toward the turnoff, and would thus require early differential Galactic Li enrichment, perhaps independent of metallicity. The magnitude of the dispersion is also consistent with the predictions of evolutionary models of halo stars with rotation, which do not require, but do not rule out either, early Galactic enrichment. These rotational models also predict a significant depletion in the lithium abundance during the stars' lifetime. The rotational models predict that stars which formed with very low initial angular momentum will have lithium abundances measurably above the plateau.

Deliyannis, Constantine P.↗