Search NASA⌕ Search

SEARCH · Search NASA

Results for “LUNAR SOIL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Electrical properties of lunar soil dependence on frequency, temperature and moisture.

It was found that the dielectric constant and loss tangent of lunar soil samples in the range from 100 Hz to 1 MHz are not strongly dependent on frequency provided care is taken to avoid exposure of the sample to atmospheric air containing moisture. The loss tangent value obtained is lower by nearly a factor 10 than any previously reported value. The measurement data imply that the surface layers of the moon are probably extremely transparent to radiowaves.

Strangway, D. W.↗
NASA NTRS2011

Thermal Analyses of Apollo Lunar Soils Provide Evidence for Water in Permanently Shadowed Areas

Thermally-evolved-gas analyses were performed on the Apollo lunar soils shortly after their return to Earth [1-8]. The analyses revealed the presence of water evolving at temperatures above 200 C. Of particular interest are samples that were collected from permanently-shadowed locations (e.g., under a boulder) with a second sample collected in nearby sunlight, and pairs in which one was taken from the top of a trench, and the second was taken at the base of the trench, where the temperature would have been -10 to -20 C prior to the disturbance [9]. These samples include 63340/63500, 69941/69961, and 76240/76280. At the time that this research was first reported, the idea of hydrated minerals on the lunar surface was somewhat novel. Nevertheless, goethite was observed in lunar breccias from Apollo 14 [10], and it was shown that goethite, hematite and magnetite could originate in an equilibrium assemblage of lunar rocks

Cooper, Bonnie L.↗
NASA NTRS2008

Modification of Roberts' Theory for Rocket Exhaust Plumes Eroding Lunar Soil

In preparation for the Apollo program, Leonard Roberts developed a remarkable analytical theory that predicts the blowing of lunar soil and dust beneath a rocket exhaust plume. Roberts' assumed that the erosion rate is determined by the "excess shear stress" in the gas (the amount of shear stress greater than what causes grains to roll). The acceleration of particles to their final velocity in the gas consumed a portion of the shear stress. The erosion rate continues to increase until the excess shear stress is exactly consumed, thus determining the erosion rate. He calculated the largest and smallest particles that could be eroded based on forces at the particle scale, but the erosion rate equation assumes that only one particle size exists in the soil. He assumed that particle ejection angles are determined entirely by the shape of the terrain, which acts like a ballistic ramp, the particle aerodynamics being negligible. The predicted erosion rate and particle upper size limit appeared to be within an order of magnitude of small-scale terrestrial experiments, but could not be tested more quantitatively at the time. The lower particle size limit and ejection angle predictions were not tested.

Metzger, Philip T.↗
NASA NTRSDate not supplied

Force Measurements to Excavate Lightly Compacted Granular Lunar Soil Simulant GRC-3B

The Advanced Planetary Excavator (APEX) was used to measure the forces to dig in lightly compacted granular lunar soil simulant GRC-3B with a 21.6-cm wide bucket which has a 30° leading edge. Long linear digs at 10-cm depth and variable rake angle were conducted to determine the reproducibility of the soil preparation. Cone penetrometer tests measured the soil condition prior to each test. Linear trajectories at 10-cm depth with rake angles of 10, 20, and 30 degrees show horizontal force increased and vertical force decreased as rake angle increased. NASA Glenn’s excavation laboratory and the APEX provide the capability of repeatable excavation trajectories and consistent soil preparation. The APEX can provide both linear and arc trajectories to measure excavation forces required for a small rover pushing a blade or a bucket on the lunar surface. To determine scaling effects, the forces to excavate with different sized implements can be measured directly

Margaret P Proctor↗
NASA NTRS1992

Steady state composition with low Fe(2+) concentrations for efficient O2 production by 'magma' electrolysis of lunar soils

Parameters are estimated for a hypothetical, well stirred, continuous-feed electrolytic cell that converts 20 percent of a lunar soil feedstock to O2 gas, 26 percent to Fe-Si metal, 13 percent to spinel, and 41 percent to slag. Advantages of a molten Fe-Si cathode for trapping metal on reduction, a relatively conductive steady-state composition in equilibrium with spinel (a proposed container material), and close electrodes (less than 1 cm cathode-anode distance) are discussed. To produce 1 ton of O2, about 6 MHW of energy are required for the electrolysis and IR heating within the melt, and another about 6 MHW may be introduced as waste heat through internal resistance of the electrodes. Thus, to produce 1 ton of O2 per 24 hours, about 0.5 MW of power delivered to the cell would be required.

Haskin, Larry A.↗
NASA NTRS1992

Oxygen from the lunar soil by molten silicate electrolysis

Accepting that oxygen, rather than gigantic gems or gold, is likely to make the Moon's Klondike, the extraction of oxygen from the lunar soil by molten silicate electrolysis has chosen to be investigated. Process theory and proposed lunar factory are addressed.

Colson, Russell O.↗
NASA NTRS1981

The effect of interstitial gaseous pressure on the thermal conductivity of a simulated Apollo 12 lunar soil sample

The thermal conductivity of a simulated Apollo 12 soil sample is measured as a function of interstitial gas density, and implications for the thermal properties of lunar and Martian regolith are discussed. Measurements were performed for samples consisting of a mixture of Knippa and Berkely basalt powders with a grain size distribution identical to that of Apollo 12 lunar soil samples by the needle probe technique at interstitial pressures of He, N2, Ar and CO2 from 133,000 to 0.0133 Pa. It is shown that sample thermal conductivity decreases with decreasing interstitial gas pressure down to 1.0 Pa, due to the decreasing effective thermal conductivity of interstitial gas with decreasing gas pressure. Constant thermal conductivity values of 8.8 mW/m per K and 10.9 mW/m per K are obtained for sample densities of 1.70 and 1.85 g/cu cm, respectively, in agreement with in situ lunar regolith measurements. The results, which are greater than those obtained in previous soil studies, are explained by the dense packing of soil particles and enhanced intergranular thermal contact in the present experimental configuration, rather than the influence of interstitial gas pressure. The differences in conductivity between loose soils and packed regolith may also be used to account for the two peaks observed in Martian surface thermal inertia data.

Horai, K.-I.↗
NASA NTRS1986

Effects of lunar soil, Zagami meteorite, and ocean ridge basalt on the excretion of itoic acid, a siderophore, and coproporphyrin by Bacillus subtilis

Samples of lunar soil (10084,151), Zagami meteorite, postulated to be ejected from Mars, and ocean ridge basalt, the most abundant volcanic rock on earth, all completely inhibited the excretion of itoic acid and of coproporphyrin by Bacillus subtilis, a common airborne bacterium. Since such inhibition has been known to occur only under iron rich growth conditions(the excretion of these compounds occurs under iron deficient growth conditions), the result indicated that the organism was capable of extracting iron quite readily from these materials. A sample of synthetic ilmenite completely failed to inhibit the excretion of coproporphyrin, and inhibited the excretion of itoic acid only slightly. The result suggested that much of the iron extracted by the organism must have come from iron sources other than ilmenite,such as pyroxenes and olivines,in these natural materials tested.

Ito, T.↗
NASA NTRS1990

Hydrogen, helium, and other solar-wind components in lunar soil - Abundances and predictions

The lack of a shielding atmosphere on the moon permits solar-wind particles to impinge upon the lunar soil and become implanted into the various phases which comprise the soil. Relatively large quantities of solar-wind implanted hydrogen (50-100 ppm) and helium (10-50 ppm) are present. The measured parameter of I(s)FeO, a direct indicator of maturity and exposure age, can be used as a first approximation to predict the abundances of many solar-wind components in the soils. However, because ilmenite acts as a 'sponge' for the retention of certain elements, the TiO2 content of the soil is a better indicator for hydrogen and helium contents.

Taylor, Lawrence A.↗
NASA NTRS1992

Shock-treated Lunar Soil Simulant: Preliminary Assessment as a Construction Material

In an effort to examine the feasibility of applying dynamic compaction techniques to fabricate construction materials from lunar regolith, preliminary explosive shock-loading experiments on lunar soil simulants were carried out. Analysis of our shock-treated samples suggests that binding additives, such as metallic aluminum powder, may provide the necessary characteristics to fabricate a strong and durable building material (lunar adobe) that takes advantage of a cheap base material available in abundance: lunar regolith.

Boslough, Mark B.↗
NASA NTRSDate not supplied

Power Measurements to Excavate Lunar Soil Simulant GRC-3B Using Arc Backhoe Trajectories

Understanding, mitigating, and minimizing power and mass requirements are crucial to developing the next generation excavation technologies for lunar and planetary in-situ resource utilization (ISRU). Towards this end, electrical power to the Advanced Planetary Excavator (APEX) was measured while excavating granular lunar soil simulant GRC-3B. Using a 21.6-cm wide bucket having a 30° leading edge, arc-shaped backhoe trajectories were dug to depths of 5, 10, and 20 cm with rake angles of 10, 20, and 30 degrees. Maximum net power, net energy, net energy per mass excavated, rate of mass excavated, horizontal distance from soil entry to exit (at bucket tip), and the trajectory to bucket volume percentage are presented to inform the scientific community as trajectories and designs are planned for future missions. Using APEX’s capability to evaluate power and energy consumption of excavation tools and processes gives guidance to developing power requirements and efficient methods for lunar excavation.

Excavation↗
NASA NTRS1980

K/Ar dating of lunar soils. IV - Orange glass from 74220 and agglutinates from 14259 and 14163

Total fusion Ar-40 - A-39 analyses of orange glass from lunar soil 74220 combined with the sums of earlier stepwise heating data by other workers have yielded a precise K/Ar isochron with a slope corresponding to an age of 3.66 + or - 0.03 G.y. for the orange glass. The result is in marginal agreement with Huneke's (1978) age of 3.60 + or - 0.04 G.y. for 74220 glass. The Ar systematics in the agglutinates from 14259 and 14163 are dominated by volume correlated argon. Step-wise heating analyses yield data which define experimentally reproducible linear arrays in Ar-40/Ar-36 vs. K-40/Ar-36 diagrams. The slopes of these arrays correspond formally to very old ages, but it is not clear, however, that such ages have any physical significance.

Alexander, E. C., Jr.↗
NASA NTRS1989

Oxygen and iron production by electrolytic smelting of lunar soil

Previous work has shown that Fe(sup 0) and O2 can be derived by electrolysis from silicate smelt of a composition typical of lunar soils (Lindstrom and Haskin 1979). In the present study, the goal is to refine further the conditions necessary to optimize production and to determine efficiencies of production (how much product is derived for a given current) and purity of products. These depend on several factors, including potential imposed between electrodes, configuration and surface area of the electrodes, composition of the electrolyzed silicate melt, and oxygen fugacity. Experiments were designed to measure the dependence on these variables of three parameters that must be known before production by electrolysis can be optimized. These parameters are: Limiting Current; Actual Current; and Efficiencies of Production.

Haskin, Larry A.↗
NASA NTRS2008

Numerically Modeling the Erosion of Lunar Soil by Rocket Exhaust Plumes

In preparation for the Apollo program, Leonard Roberts of the NASA Langley Research Center developed a remarkable analytical theory that predicts the blowing of lunar soil and dust beneath a rocket exhaust plume. Roberts assumed that the erosion rate was determined by the excess shear stress in the gas (the amount of shear stress greater than what causes grains to roll). The acceleration of particles to their final velocity in the gas consumes a portion of the shear stress. The erosion rate continues to increase until the excess shear stress is exactly consumed, thus determining the erosion rate. Roberts calculated the largest and smallest particles that could be eroded based on forces at the particle scale, but the erosion rate equation assumed that only one particle size existed in the soil. He assumed that particle ejection angles were determined entirely by the shape of the terrain, which acts like a ballistic ramp, with the particle aerodynamics being negligible. The predicted erosion rate and the upper limit of particle size appeared to be within an order of magnitude of small-scale terrestrial experiments but could not be tested more quantitatively at the time. The lower limit of particle size and the predictions of ejection angle were not tested. We observed in the Apollo landing videos that the ejection angles of particles streaming out from individual craters were time-varying and correlated to the Lunar Module thrust, thus implying that particle aerodynamics dominate. We modified Roberts theory in two ways. First, we used ad hoc the ejection angles measured in the Apollo landing videos, in lieu of developing a more sophisticated method. Second, we integrated Roberts equations over the lunar-particle size distribution and obtained a compact expression that could be implemented in a numerical code. We also added a material damage model that predicts the number and size of divots which the impinging particles will cause in hardware surrounding the landing rocket. Then, we performed a long-range ballistics analysis for the ejected particulates.

Source record↗
NASA NTRS1979

Some effects of gas adsorption on the high temperature volatile release behavior of a terrestrial basalt, tektite and lunar soil

Mass pyrograms obtained from high-temperature, mass psectrometric pyrolysis of a glassy theoleiitic submarine basalt and a tektite, ground in air to less than 64 microns, have shown N2 and SO release patterns very similar to those from the pyrolysis of mature lunar soil fines. The N2 and CO release behavior from the terrestrial samples reproduces the biomodal, high-temperature (approximately 700 and 1050 C) features from the lunar samples. Unground portions of the basalt and tektite show no release of N2 and CO during pyrolysis. Grinding also alters the release behavior and absolute amounts of H2O and CO2. It is suggested that adsorption of atmospheric gases in addition to solar wind implantation of ions may account for the wide range of values in previously reported concentrations of carbon and nitrogen from lunar fines.

Graham, D. G.↗