Search NASA⌕ Search

SEARCH · Search NASA

Results for “Life Cycle Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Upconversion of non-recycled MSW paper fractions into biochar via slow pyrolysis and life cycle analysis: Pathways to net negative GHG emission

This study presents an integrated and sustainable approach to valorizing non-recycled municipal solid waste (MSW), a heterogeneous and underutilized waste stream destined for landfilling, by converting it into valuable biochar resources. Specifically, we investigated the upcycling of nonrecycled paper waste based on compositional analysis into four major fractions: high cellulose, high lignin, high contamination, and high ash content papers. These fractions were then homogenized and subjected to slow pyrolysis. The high cellulose fraction (36.1 %) was the most abundant, and contained 66.7 % cellulose, while the high lignin fraction showed the highest lignin (12.1 %) and carbon content (44 %), resulting in highest energy value of 17.4 MJ kg −1 . Biochar yields ranged from 25.6 % to 35.6 %, with the high ash fraction producing the highest yield and alkalinity (pH ≈ 11.2) due to its higher mineral content. Elemental analysis revealed enhanced carbon content up to 76.9 % and reduced oxygen and hydrogen, confirming effective carbonization. The high lignin-derived biochar showed the highest aromatic carbon content (82.8 %) and greater structural stability, while contaminated and ash-rich fractions exhibited dense, low-porosity surfaces due to the presence of contaminants and minerals. Spectroscopic analysis revealed degradation of carbohydrates, disappearance of cellulose peaks and formation of aromatic and mineral derived phases. The scaled life cycle process yielded a global warming potential (GWP) of 119.3 kg CO 2 -eq per ton of dry paper waste, offset by soil carbon sequestration of − 556.41 kg CO 2 -eq, resulting in a net impact of − 427.36 kg CO 2 -eq. This represents a net carbon removal exceeding by ~186 % the emissions associated with landfilling paper waste with electricity generation.

09 BIOMASS FUELS↗

Life Cycle Analysis of Coal Exports from the Powder River Basin

This study seeks to evaluate and understand potential environmental consequences of exporting Powder River Basin (PRB) coal compared to global alternative sources of coal. Some of the questions that arise in regards to environmental impacts of PRB exports to Asia include the following. (1) Which stages of the life cycle (e.g., mining, transport, power plant combustion) contribute the most to environmental impacts? (2) How do environmental impacts at each stage differ between the PRB and competing countries? (3) Do environmental impacts differ substantially based on the importing country? (4) Is there a definitive difference between the life cycle greenhouse gas (GHG) profiles between sourcing coal from the U.S. (PRB), Australia, or Indonesia for Japan, South Korea, or Taiwan?

01 COAL, LIGNITE, AND PEAT↗

A Life Cycle Analysis of Refinery Fuel Products Air Emissions Using Refinery Emissions Inventory Data

With the transportation sector being a major source of air pollutant emissions, this study seeks to evaluate criteria pollutant emissions associated with the use of petroleum fuels in vehicles using the GREET® (Greenhouse gases, Regulated Emissions, and Energy use in Transportation) well-to-wheel model. The life cycle of petroleum fuels includes the major stages of crude recovery, crude transportation, crude refining, fuel distribution and fuel combustion (vehicle operation). This study focuses on quantifying refinery emissions, in terms of both refinery throughput and various refinery fuel products, by matching a refinery emissions inventory dataset with refinery operation information, at various levels (national, regional, facility, and process unit). The refinery emissions in terms refinery throughput (per refinery crude input, in g/mmbtu crude) are developed at a regional level for various Petroleum Administration for Defense Districts (PADD), and also aggregated at the national level. To allocate refinery emissions to refinery products, a methodology is developed using a refinery operation optimization Linear Programming (LP) model for individual refineries. The results from individual refinery facilities are then aggregated to obtain statistical national average (capacity weighted) emissions for each product. Because refineries vary by complexity of operation, configuration, crude quality, and product slate, the derived emissions demonstrate large variation for each product and per unit of crude input. Relative to previous estimates used in the GREET model, the present research shows reductions in refinery (and life cycle) emissions for most criteria pollutants. The reduction is especially significant for sulfur dioxide (SOx) emissions.

Allocation↗

Whole-building life-cycle analysis with a new GREET® tool: Embodied greenhouse gas emissions and payback period of a LEED-Certified library

Embodied greenhouse gas (GHG) emissions of building components and buildings operations need to be quantified to holistically address building sustainability. To evaluate embodied GHG emissions of buildings and to provide insights on building materials and building design decisions toward decarbonization, we have recently created a building life-cycle assessment (LCA) module in the widely used Greenhouse gases, Regulated Emissions, and Energy use in Technologies (GREET (R)) LCA model. We applied the GREET building LCA module to examine embodied GHG impacts and the payback period of a LEED (Leadership in Energy and Environmental Design) certified public library in Chicago, USA. We developed localized, detailed life-cycle inventories to address individual building materials used in the library. We expanded the LCA system boundary to include the mechanical, electrical, and plumbing system, as well as refrigerant impacts, which are often ignored in previous studies. Results show that the total embodied GHG emissions are approximately 817 metric tons, or approximately 538 kg/m 2 . Sensitivity analysis highlights the positive role of increasing the use of recycled materials for reducing embodied GHG emissions. Sensitivity analysis on embodied GHG emissions payback periods shows the need to benchmark the embodied and operational carbon performance of buildings for comparison to alternative building designs and sustainability practices. Furthermore, this analysis demonstrates that building LCA models, such as the GREET building LCA module, which addresses embodied and operational GHG emission impacts of whole buildings holistically, could empower building architects, technology developers, manufacturers, and general contractors to address embodied and operational impacts holistically for building sustainability.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Life cycle analysis of hydrogen production via methane pyrolysis using plasma arc

Steam methane reforming of natural gas is the primary method of producing hydrogen in the United States, accounting for 95% of all hydrogen produced there. Methane pyrolysis, an alternative production pathway that decomposes natural gas into solid carbon and hydrogen, both eliminates CO 2 emissions associated with methane reforming and allows for additional income from carbon black. A life-cycle inventory of this process has been developed using ASPEN Plus to model the methane pyrolysis (plasma arc) process. From well to gate, hydrogen production via methane pyrolysis produces 2.78 kg CO 2 e/kg H 2 of greenhouse gas emissions using mass allocation of emissions between hydrogen and carbon black coproducts. The well-to-gate emissions are mainly driven by electricity consumption (∼38 kW h/kg H 2 ), which accounts for 81% of the emissions; if renewable electricity is used, well-to-gate emissions can be reduced to −0.448 kg CO 2 e/kg H 2 .

08 HYDROGEN↗

Algae-Based Beneficial Re-use of Carbon Emissions Using a Novel Photobioreactor: a Techno-Economic and Life Cycle Analysis

Despite the many advantages of microalgae, the feasibility of large-scale cultivation requires significant amounts of carbon dioxide (CO 2 ) to enable high growth rates. A synergistic union typically proposed for the supply of CO 2 is the coupling of algal cultivation with emissions from power plants. This study investigates the sustainability of a novel microalgae platform coupled with coal-based flue gas. The proposed system consists of a novel photobioreactor (PBR) for the production of biomass followed by a two-stage dewatering process. Here, a systems model, which quantifies the CO 2 and energy consumption of the proposed system, was developed and the minimum biomass selling price (MBSP) was determined by a techno-economic analysis (TEA). TEA results indicate that a facility with the capacity to capture 30% of the emissions from a 1 MW power plant requires a biomass production of 1280 metric tonnes per year, which when scaled to a nth of kind facility, can produce biomass at a MBSP of $2322 per tonne. The environmental impact of the proposed facility was determined by a life cycle assessment methodology and results indicate a carbon capture potential of 1.16 x 10 4 metric tons of CO 2 equivalent. In addition, an energy analysis indicates a desirable net energy ratio of 0.1, which is lower than conventional PBRs. Discussion focuses on the requirements to reduce biomass production cost, including research investment areas for increasing productivity while decreasing energy requirements.

09 BIOMASS FUELS↗

Life-Cycle Analysis of Alternative Aviation Fuels in GREET

The Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model, developed at Argonne National Laboratory, has been expanded to include well-to-wake (WTWa) analysis of aviation fuels and aircraft. This report documents the key WTWa stages and assumptions for fuels that represent alternatives to petroleum jet fuel. The aviation module in GREET consists of three spreadsheets that present detailed characterizations of well-to-pump and pump-to-wake parameters and WTWa results. By using the expanded GREET version (GREET1{_}2011), we estimate WTWa results for energy use (total, fossil, and petroleum energy) and greenhouse gas (GHG) emissions (carbon dioxide, methane, and nitrous oxide) for (1) each unit of energy (lower heating value) consumed by the aircraft or (2) each unit of distance traveled/ payload carried by the aircraft. The fuel pathways considered in this analysis include petroleum-based jet fuel from conventional and unconventional sources (i.e., oil sands); Fisher-Tropsch (FT) jet fuel from natural gas, coal, and biomass; bio-jet fuel from fast pyrolysis of cellulosic biomass; and bio-jet fuel from vegetable and algal oils, which falls under the American Society for Testing and Materials category of hydroprocessed esters and fatty acids. For aircraft operation, we considered six passenger aircraft classes and four freight aircraft classes in this analysis. Our analysis revealed that, depending on the feedstock source, the fuel conversion technology, and the allocation or displacement credit methodology applied to co-products, alternative bio-jet fuel pathways have the potential to reduce life-cycle GHG emissions by 55-85 percent compared with conventional (petroleum-based) jet fuel. Although producing FT jet fuel from fossil feedstock sources - such as natural gas and coal - could greatly reduce dependence on crude oil, production from such sources (especially coal) produces greater WTWa GHG emissions compared with petroleum jet fuel production unless carbon management practices, such as carbon capture and storage, are used.

01 COAL, LIGNITE, AND PEAT↗

Life-Cycle Analysis of Alternative Aviation Fuels in GREET

The Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model, developed at Argonne National Laboratory, has been expanded to include well-to-wake (WTWa) analysis of aviation fuels and aircraft. This report documents the key WTWa stages and assumptions for fuels that represent alternatives to petroleum jet fuel. The aviation module in GREET consists of three spreadsheets that present detailed characterizations of well-to-pump and pump-to-wake parameters and WTWa results. By using the expanded GREET version (GREET1_2011), we estimate WTWa results for energy use (total, fossil, and petroleum energy) and greenhouse gas (GHG) emissions (carbon dioxide, methane, and nitrous oxide) for (1) each unit of energy (lower heating value) consumed by the aircraft or(2) each unit of distance traveled/ payload carried by the aircraft. The fuel pathways considered in this analysis include petroleum-based jet fuel from conventional and unconventional sources (i.e., oil sands); Fisher-Tropsch (FT) jet fuel from natural gas, coal, and biomass; bio-jet fuel from fast pyrolysis of cellulosic biomass; and bio-jet fuel from vegetable and algal oils, which falls under the American Society for Testing and Materials category of hydroprocessed esters and fatty acids. For aircraft operation, we considered six passenger aircraft classes and four freight aircraft classes in this analysis. Our analysis revealed that, depending on the feedstock source, the fuel conversion technology, and the allocation or displacement credit methodology applied to co-products, alternative bio-jet fuel pathways have the potential to reduce life-cycle GHG emissions by 55–85 percent compared with conventional (petroleum-based) jet fuel. Although producing FT jet fuel from fossil feedstock sources — such as natural gas and coal — could greatly reduce dependence on crude oil, production from such sources (especially coal) produces greater WTWa GHG emissions compared with petroleum jet fuel production unless carbon management practices, such as carbon capture and storage, are used.

54 ENVIRONMENTAL SCIENCES↗

Update of distillers grains displacement ratios for corn ethanol life-cycle analysis.

Production of corn-based ethanol (either by wet milling or by dry milling) yields the following coproducts: distillers grains with solubles (DGS), corn gluten meal (CGM), corn gluten feed (CGF), and corn oil. Of these coproducts, all except corn oil can replace conventional animal feeds, such as corn, soybean meal, and urea. Displacement ratios of corn-ethanol coproducts including DGS, CGM, and CGF were last updated in 1998 at a workshop at Argonne National Laboratory on the basis of input from a group of experts on animal feeds, including Prof. Klopfenstein (University of Nebraska, Lincoln), Prof. Berger (University of Illinois, Urbana-Champaign), Mr. Madson (Rapheal Katzen International Associates, Inc.), and Prof. Trenkle (Iowa State University) (Wang 1999). Table 1 presents current dry milling coproduct displacement ratios being used in the GREET model. The current effort focuses on updating displacement ratios of dry milling corn-ethanol coproducts used in the animal feed industry. Because of the increased availability and use of these coproducts as animal feeds, more information is available on how these coproducts replace conventional animal feeds. To glean this information, it is also important to understand how industry selects feed. Because of the wide variety of available feeds, animal nutritionists use commercial software (such as Brill Formulation{trademark}) for feed formulation. The software recommends feed for the animal on the basis of the nutritional characteristics, availability, and price of various animal feeds, as well as on the nutritional requirements of the animal (Corn Refiners Association 2006). Therefore, feed formulation considers both the economic and the nutritional characteristics of feed products.

09 BIOMASS FUELS↗

Life-cycle analysis of greenhouse gas emissions from renewable jet fuel production

Background: The introduction of renewable jet fuel (RJF) is considered an important emission mitigation measure for the aviation industry. This study compares the well-to-wake (WtWa) greenhouse gas (GHG) emission performance of multiple RJF conversion pathways and explores the impact of different co-product allocation methods. The insights obtained in this study are of particular importance if RJF is included as an emission mitigation instrument in the global Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA). Results: Fischer–Tropsch pathways yield the highest GHG emission reduction compared to fossil jet fuel (86–104%) of the pathways in scope, followed by Hydrothermal Liquefaction (77–80%) and sugarcane- (71–75%) and corn stover-based Alcohol-to-Jet (60–75%). Feedstock cultivation, hydrogen and conversion inputs were shown to be major contributors to the overall WtWa GHG emission performance. The choice of allocation method mainly affects pathways yielding high shares of co-products or producing co-products which effectively displace carbon intensive products (e.g., electricity). Conclusions: Renewable jet fuel can contribute to significant reduction of aviation-related GHG emissions, provided the right feedstock and conversion technology are used. The GHG emission performance of RJF may be further improved by using sustainable hydrogen sources or applying carbon capture and storage. Based on the character and impact of different co-product allocation methods, we recommend using energy and economic allocation (for non-energy co-products) at a global level, as it leverages the universal character of energy allocation while adequately valuing non-energy co-products.

Bioenergy↗

Carbon Life Cycle Analysis of CO 2 -EOR for Net Carbon Negative Oil (NCNO) Classification (Final Report)

This final report summarizes the work that was conducted to achieve the project’s general objective of developing a clear and repeatable methodology to determine whether the oil produced in a conventional CO 2 enhanced oil recovery (CO 2 -EOR) operation can be classified as Net Carbon Negative Oil (NCNO). The report also summarizes the reservoir mass accounting methodology and the monitoring, verification, and accounting (MVA) methodology, which are critical elements that support the general objective and were conceived as project goals. Because the purpose is to classify the EOR product (crude oil) and not the EOR project itself, and as the rate of crude oil production varies significantly with time, the methodology uses a novel dynamic carbon lifecycle analysis (d-LCA) that links instant energy demand and associated greenhouse gas (GHG) emissions to instant operational performance. The EOR operational performance is assessed through CO 2 utilization rates, which relate usage of CO 2 to oil production This dynamic method provides a better understanding of the evolution of the environmental impact (CO 2 emissions) and mitigation (geologic CO 2 storage) associated with an expanded carbon capture, utilization and storage (CCUS) system, from start to closure of operations. The dynamic interplay between operational and environmental performance forms the basis of our CCUS technology analysis. The LCA part of the work is meant to complement previous NETL LCA work, and so it focused on EOR/storage efficiency, its variability through time, and the impact of this variability on LCA results. The environmental impact of the CCUS system was assessed for 3 system boundaries: (1) gate-to-gate, (2) gate-to-grave, and (3) cradle-to-grave. The environmental impact was also assessed considering the electricity displacement from other generation facilities. Another goal of our study was to use results to make recommendations on EOR field development strategies that are conducive to producing NCNO. Because field operational strategies have a significant impact on reservoir engineering parameters that affect both CO 2 storage and oil production (e.g., sweep efficiency, flood conformance, fluid saturation distribution), we conducted a scenario analysis that assesses the operational and environmental performance of four common and novel CO 2 -EOR field development strategies. Results show that all CO 2 -EOR evaluated scenarios start operating with a negative carbon footprint and, years into the project, transition into operating with a positive carbon footprint. Having achieved a result that proves that all CO 2 -EOR operations produce NCNO during the first years of production is critical in the context of the urgency of climate change mitigation. Transition points are significantly different in each scenario. ii In a cradle-to-grave CCUS system, if the capture facility displaces a conventional power source and credits are added for displacement, the adverse impact caused by the system expansion not only is reversed but transformed into a significant environmental benefit. The effect of the displacement more than compensates the emissions associated with the electricity generation requirements for the production of CO 2 , as much more electricity will be displaced. Results provide an understanding of the evolution of the system’s net carbon balance of all four field development strategies studied. This information can be useful to CO 2 -EOR operators seeking value in storing more CO 2 through a carbon credit program (e.g., the 45Q federal carbon credit program). Most importantly, this study serves as confirmation that CO 2 -EOR can be operationally designed to both enhance oil production and reduce greenhouse gas emissions to the atmosphere.

02 PETROLEUM↗