Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC MEMORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Tuning In-Plane Magnetic Anisotropy and Interfacial Exchange Coupling in Epitaxial La 2/3 Sr 1/3 CoO 3 /La 2/3 Sr 1/3 MnO 3 Heterostructures

Controlling the in-plane magnetocrystalline anisotropy and interfacial exchange coupling between ferromagnetic (FM) layers plays a key role in next-generation spintronic and magnetic memory devices. In this work, we explored the effect of tuning the magnetocrystalline anisotropy of La 2/3 Sr 1/3 CoO 3 (LSCO) and La 2/3 Sr 1/3 MnO 3 (LSMO) layers and the corresponding effect on interfacial exchange coupling by adjusting the thickness of the LSCO layer (t LSCO ). The epitaxial LSCO/LSMO bilayers were grown on (110) o -oriented NdGaO 3 (NGO) substrates with a fixed LSMO (top layer) thickness of 6 nm and LSCO (bottom layer) thicknesses varying from 1 to 10 nm. Despite the small difference (~0.2%) in lattice mismatch between the two in-plane directions, [001] o and [11̅0] o , a pronounced in-plane magnetic anisotropy was observed. Soft X-ray magnetic circular dichroism hysteresis loops revealed that for t LSCO ≤ 4 nm, the easy axes for both LSCO and LSMO layers were along the [001] o direction, and the LSCO layer was characterized by magnetically active Co 2+ ions that strongly coupled to the LSMO layer. No exchange bias effect was observed in the hysteresis loops. In contrast, along the [11̅0] o direction, the LSCO and LSMO layers displayed a small difference in their coercivity values, and a small exchange bias shift was observed. As t LSCO increased above 4 nm, the easy axis for the LSCO layer remained along the [100] o direction, but it gradually rotated to the [11̅0] o direction for the LSMO layer, resulting in a large negative exchange bias shift. Therefore, we provide a way to control the magnetocrystalline anisotropy and exchange bias by tuning the interfacial exchange coupling between the two FM layers.

36 MATERIALS SCIENCE↗

Strain and Defect-Tailored Magnetotransport in NiCo 2 O 4 Thin Films and Freestanding Membranes

Magnetic spinel NiCo 2 O 4 is promising for developing spintronic applications due to its high magnetic Curie temperature, high spin polarization, fast spin dynamics, and strain-tunable magnetic anisotropy, while its electronic and magnetic properties depend sensitively on epitaxial strain and disorder. Here, in this study, we use epitaxial NiCo 2 O 4 thin films and freestanding NiCo 2 O 4 membranes as model systems to reveal the complex interplay of strain and defects in determining the metallicity and magnetotransport properties of the ferrimagnetic spinel. NiCo 2 O 4 on perovskite substrates and NiCo 2 O 4 membranes exhibit insulating behaviors and spin canting, in sharp contrast to the metallic NiCo 2 O 4 films on spinel substrates that possess strong perpendicular magnetic anisotropy. Anisotropic magnetoresistance studies provide critical information about disorder-induced spin scattering and strain-induced tetragonal magnetocrystalline anisotropy, which is corroborated by comprehensive electron microscopy characterizations. Our study presents a promising venue for designing flexible magnetic memory, sensor, and spintronic applications.

36 MATERIALS SCIENCE↗

Strongly Surface State Carrier‐Dependent Spin–Orbit Torque in Magnetic Topological Insulators

Abstract The topological surface states (TSS) in topological insulators (TIs) can exert strong spin–orbit torque (SOT) on adjacent magnetization, offering great potential in implementing energy‐efficient magnetic memory devices. However, there are large discrepancies among the reported spin Hall angle values in TIs, and its temperature dependence still remains elusive. Here, the spin Hall angle in a modulation‐doped Cr‐Bi x Sb 2− x Te 3 (Cr‐BST) film is quantitatively determined via both transport and optic approaches, where consistent results are obtained. A large spin Hall angle of ≈90 in the modulation‐doped Cr‐BST film is demonstrated at 2.5 K, and the spin Hall angle drastically decreases to 0.3–0.5 as the temperature increases. Moreover, by tuning the top TSS carrier concentration, a competition between the top and bottom TSS in contributing to SOT is observed. The above phenomena can account for the large discrepancies among the previously reported spin Hall angle values and reveal the unique role of TSS in generating SOT.

Che, Xiaoyu↗

Room-Temperature Skyrmions in an Antiferromagnet-Based Heterostructure

Magnetic skyrmions as swirling spin textures with a nontrivial topology have potential applications as magnetic memory and storage devices. Since the initial discovery of skyrmions in non-centrosymmetric B20 materials, the recent effort has focused on exploring room-temperature skyrmions in heavy metal and ferromagnetic heterostructures, a material platform compatible with existing spintronic manufacturing technology. Here, we report the surprising observation that a room-temperature skyrmion phase can be stabilized in an entirely different class of systems based on antiferromagnetic (AFM) metal and ferromagnetic (FM) metal IrMn/CoFeB heterostructures. There are a number of distinct advantages of exploring skyrmions in such heterostructures including zero-field stabilization, tunable antiferromagnetic order, and sizable spin–orbit torque (SOT) for energy-efficient current manipulation. Through direct spatial imaging of individual skyrmions, quantitative evaluation of the interfacial Dzyaloshinskii–Moriya interaction, and demonstration of current-driven skyrmion motion, our findings firmly establish the AFM/FM heterostructures as a promising material platform for exploring skyrmion physics and device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging of voltage-controlled switching of magnetization in highly magnetostrictive epitaxial Fe–Ga microstructures

The magnetoelectric behavior of epitaxial Fe–Ga microstructures on top of a (001)-oriented PMN–PT piezoelectric substrate is imaged with magnetic X-ray microscopy. Additionally, the micron-scale strain distribution in PMN–PT is characterized by X-ray microdiffraction and examined with respect to the results of the Fe–Ga magnetoelectric switching. The magnetic reorientation of Fe–Ga is found to be strongly correlated with size, shape, and crystallographic orientation of the microstructures. In the case of square-shaped structures, size dictates the influence of the strain distribution on both the initialization of the ground state and on the magnetic reorientation during application of voltage. On the other hand, elliptical microstructures demonstrate completely different magnetic responses depending on the relative orientation of their long axis with respect to the crystallographic directions of the PMN–PT. This study demonstrates that engineering the behavior of highly magnetostrictive epitaxial microdevices is possible. It further elucidates that voltage-induced actuation can be largely tuned to achieve the desired type of magnetic switching ranging from vortex circulation reversal, domain wall motion, to a large rotation of magnetization. Because of the outstanding properties of the investigated material system, the reported findings are expected to be of great interest for the realization of next-generation energy-efficient magnetic memory and logic devices.

42 ENGINEERING↗

Multi-step ion beam etching of sub-30 nm magnetic tunnel junctions for reducing leakage and MgO barrier damage

We have demonstrated the fabrication of sub 30 nm magnetic tunnel junctions (MTJs) with perpendicular magnetic anisotropy. The multi-step ion beam etching (IBE) process performed for 18 min between 45 deg. and 30 deg. , at 500 V combined ion supply voltage, resulted in a 55 nm tall MTJ with 28 nm diameter. We used a negative tone electron beam resist as the hard mask, which maintained its lateral dimension during the IBE, allowing almost vertical pillar side profiles. The measurement results showed a tunnel magneto-resistance ratio of 13% at 1 k{Omega} junction resistance. With further optimization in IBE energy and multi-step etching process, it will be possible to fabricate perpendicularly oriented MTJs for future sub 30 nm non-volatile magnetic memory applications.

36 MATERIALS SCIENCE↗

Reentrant spin-glass state in a geometrical frustrated multiferroic system: Role of disorder

We investigated the effect of magnetic (Mn) and nonmagnetic (Ga) doping at the Cr site of the layered geometrically frustrated antiferromagnetic compound LiCrO{sub 2}. 10% Ga doping at the Cr site does not invoke any metastability typical of a glassy magnetic state. However, similar amount of Mn doping drives the system to a spin glass (SG) state which is particularly evident from the magnetic memory and heat capacity studies. The onset of glassy state in 10% Mn doped sample is of reentrant type developing out of higher temperature antiferromagnetic state. The SG state in the Mn-doped sample shows a true reentry with the complete disappearance of the antiferromagnetic phase below the SG transition. The lack of SG state on Ga doping indicates the importance of random ferromagnetic/antiferromagnetic bonds for the glassy ground state in LiCrO{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perpendicular magnetic tunnel junction performance under mechanical strain

We investigate effect of the mechanical stress on the performance of magnetic tunnel junctions with perpendicular magnetic anisotropy. We developed a 4-point bending setup that allows us to apply a constant stress over a large substrate area with access to electrical measurements and an external magnetic field. This setup enables us to measure key device performance parameters, such as tunnel magnetoresistance, switching current ( I c 50 % ), and thermal stability (Δ), as a function of applied stress. Finally, we find that variations in these parameters are negligible: less than 2% over the entire measured range between the zero stress condition and the maximum stress at the point of wafer breakage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain- and thickness-dependent magnetic properties of epitaxial La 0.67 Sr 0.33 CoO 3 /La 0.67 Sr 0.33 MnO 3 bilayers

Magnetic properties and interfacial phenomena of epitaxial perovskite oxides depend sensitively on parameters such as film thickness and strain state. In this work, epitaxial La0 .67 Sr 0.33 CoO 3 (LSCO)/La 0.67 Sr 0.33 MnO 3 (LSMO) bilayers were grown on NdGaO 3 (NGO) and LaAlO 3 (LAO) substrates with a fixed LSMO thickness of 6 nm, and LSCO thickness (t LSCO ) varying from 2 to 10 nm. Soft x-ray magnetic spectroscopy revealed that magnetically active Co 2+ ions that strongly coupled to the LSMO layer were observed below a critical t LSCO for bilayers grown on both substrates. On LAO substrates, this critical thickness was 2 nm, above which the formation of Co 2+ ions was quickly suppressed leaving only a soft LSCO layer with mixed valence Co 3+ /Co 4+ ions. The magnetic properties of both LSCO and LSMO layers displayed strong t LSCO dependence. This critical t LSCO increased to 4 nm on NGO substrates, and the magnetic properties of only the LSCO layer displayed t LSCO dependence. A non-magnetic layer characterized by Co 3+ ions and with a thickness below 2 nm exists at the LSCO/substrate interface for both substrates. Therefore, the results contribute to the understanding of interfacial exchange spring behavior needed for applications in next generation spintronic and magnetic memory devices.

36 MATERIALS SCIENCE↗

Emergent ferromagnetism and unusual irreversible magnetoresistance in an intercalated van der Waals antiferromagnet

Orthorhombic air-stable two-dimensional (2D) antiferromagnet (AFM) CrSBr has attracted much research interest lately thanks to its rich magnetic behaviors together with its remarkable electronic, excitonic, and polaritonic properties. Here, we report a reliable electrochemical intercalation method by inserting large tetrabutylammonium (TBA + ) ions into CrSBr layers. Magnetically, such intercalation efficiently suppresses the interlayer AFM and induces a ferromagnetic (FM) order with a much-enhanced transition temperature up to 200 K, nearly 70 K higher than the AFM onset of 132 K in pristine CrSBr. Electronically, the TBA + intercalation not only increases the electric conductivity of CrSBr, which is further enhanced by magnetic fields, but also introduces a giant negative irreversible magnetoresistance. This work demonstrates the tunable magnetic and electronic properties of CrSBr as well as their interplay, paving the way for advanced spintronic and magnetic memory devices.

36 MATERIALS SCIENCE↗

Skyrmion–skyrmion interaction in a magnetic film

Interaction of two skyrmions stabilized by the ferromagnetic exchange, Dzyaloshinskii–Moriya interaction (DMI), and external magnetic field has been studied numerically on a 2D lattice of size large compared to the separation, d, between the skyrmions. We show that two skyrmions of the same chirality (determined by the symmetry of the crystal) repel. In accordance with earlier analytical results, their long-range pair interaction falls out with the separation as exp(-d/δ H ), where δ H is the magnetic screening length, independent of the DMI. The prefactor in this expression depends on the DMI that drives the repulsion. The latter results in the spiral motion of the two skyrmions around each other, with the separation between them growing logarithmically with time. When two skyrmions of the total topological charge Q = 2 are pushed close to each other, the discreteness of the atomic lattice makes them collapse into one skyrmion of charge Q = 1 below a critical separation. Experiment is proposed that would allow one to measure the interaction between two skyrmions by holding them in positions with two magnetic tips. Our findings should be of value for designing topologically protected magnetic memory based upon skyrmions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Trends in solid state electronics, part 2

Developments in the fields of semiconductors and magnetics are surveyed. Materials, devices, theory, and fabrication technology are discussed. Important events up until the present time are reported, and events are interpreted through historical perspective. A brief analysis of forces which have driven the development of today's electronic technology and some projections of present trends are given. More detailed discussions are presented for four areas of contemporary interest: amorphous semiconductors, bubble domain devices, charge-coupled devices, and electron and ion beam techniques. Beam addressed magnetic memories are reviewed to a lesser extent.

Gassaway, J. D.↗

Prospects for the development of phototelevision methods in space studies

In-space imaging of the surface of celestial bodies can be carried out by both television and photographic equipment. Television equipment of various types has the important property of being capable of transmitting imagery in real time. Frequently this is not possible because of the nature of information transmission over the spacecraft-ground communication line. The inadequate energy handling capacity of the communication lines usually requires storage of the video information aboard the spacecraft for subsequent transmission at a definite time and rate. For this purpose, the television camera can be connected with a magnetic memory, or the television imagery may be stored on photographic film. The television/photographic film system has been termed phototelevision. The choice of a system of one type or the other is dictated by several considerations, the most important of which are the size and weight characteristics, other conditions being the same (power consumption, reliability, etc.). The advantages and disadvantages of the two systems are discussed and examples are given of types of satellites on which the two types have been employed.

Selivanov, A. S.↗

Supercomputing systems - A projection to 2000

Advances in computer architecture, computer science, computational methods, and constituent technologies are expected to lead to significant advances in the performance of scientific supercomputing system capabilities over the next decade. By the year 2000, single 1-in-sq dies are projected to incorporate four processors, each of which would be operating faster than 750 million instructions per second (MIPS) for a total on-chip processing performance in excess of 2000 MIPS. Scalable parallel processors can be expected to contain thousands of such multiple processor chips. In general, semiconductor performance advances appear to change about one order of magnitude every five years. Rotating magnetic memory and communications technology are not advancing as rapidly, with the result that the allocation of functions within the system configurations fo future supercomputer systems will require important changes. Availability of massively parallel heterogeneous processing capabilities should be a catalyst leading to new approaches for applications.

Lundstrom, S. F.↗

Imaging Domains In Magnetic Garnets By Use Of TSMFM

Tunneling-stabilized magnetic-force microscopy (TSMFM) demonstrated to yield images of magnetic domains in low-coercivity magnetic garnets with perpendicular anisotropy. Ability to generate images of domain walls and minute vertical Bloch lines aids study of vertical-Bloch-line magnetic memory devices that contain garnets. TSMFM provides desired resolution because its resolution not limited by diffraction.

Katti, Romney R.↗