Search NASA⌕ Search

SEARCH · Search NASA

Results for “MASS RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Photometric Study and Absolute Parameter Estimation of Six Totally Eclipsing Contact Binaries

High precision CCD observations of six totally eclipsing contact binaries were presented and analyzed. It is found that only one target is an A-type contact binary (V429 Cam), while the others are W-type contact ones. By analyzing the times of light minima, we discovered that two of them exhibit secular period increase while three manifest long-term period decrease. For V1033 Her, a cyclic variation superimposed on the long-term increase was discovered. By comparing the Gaia distances with those calculated by the absolute parameters of 173 contact binaries, we found that the Gaia distance can be applied to estimate the absolute parameters for most contact binaries. The absolute parameters of our six targets were estimated using their Gaia distances. The evolutionary status of contact binaries was studied, and we found that the A- and W-subtype contact binaries may have different formation channels. The relationship between the spectroscopic and photometric mass ratios for 101 contact binaries was presented. It was discovered that the photometric mass ratios are in good agreement with the spectroscopic ones for almost all of the totally eclipsing systems, which is corresponding to the results derived by Pribulla et al. and Terrell & Wilson.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

EDEN: Exploring Disks Embedded in N-body Simulations of Milky Way–mass Halos from Symphony

We investigate the impact of galactic disks on the tidal stripping of cold dark matter subhalos within Milky Way (MW)-mass halos (M vir ∼ 10 12 M ⊙ ) using a new simulation suite, EDEN. By re-simulating 45 MW-mass zoomed-in halos from the N-body Symphony compilation with embedded disk potentials, which evolve according to star formation histories predicted by the UniverseMachine model, we self-consistently tie disk growth to halo accretion rate and significantly expand the range of disk masses and formation histories studied. We use the particle-tracking-based subhalo finder Symfind to enhance the robustness of subhalo tracking. We find that disks near the median disk-to-halo mass ratio of our sample (M *,Disk /M vir,host = 2%) reduce subhalo peak mass functions within 100 kpc by about 10% for peak masses above 10 8 M ⊙ . Heavier, MW/M31-like disks (M *,Disk /M vir,host ≳ 5%) lead to a reduction of more than 40%. Subhalo abundance suppression is more pronounced near halo centers, with particularly enhanced stripping for subhalos accreted over 8 Gyr ago on orbits with pericenters <100 kpc. Suppression is further amplified when disk mass is increased within fixed halo and disk assembly histories. In all cases, the suppression we measure should be interpreted as stripping below the mass resolution limit rather than complete subhalo disruption. This study reshapes our understanding of the MW’s impact on its satellites, suggesting it strips subhalos more efficiently than typical MW-mass galaxies due to its larger disk-to-halo mass ratio and earlier disk formation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

A Gas Giant Planet in the OGLE-2006-BLG-284L Stellar Binary System

We present the analysis of microlensing event OGLE-2006-BLG-284, which has a lens system that consists of two stars and a gas giant planet with a mass ratio of q {sub p} = (1.26 ± 0.19) × 10{sup −3} to the primary. The mass ratio of the two stars is q {sub s} = 0.289 ± 0.011, and their projected separation is s {sub s} = 2.1 ± 0.7 au, while the projected separation of the planet from the primary is s {sub p} = 2.2 ± 0.8 au. For this lens system to have stable orbits, the three-dimensional separation of either the primary and secondary stars or the planet and primary star must be much larger than the projected separations. Since we do not know which is the case, the system could include either a circumbinary or a circumstellar planet. Because there is no measurement of the microlensing parallax effect or lens system brightness, we can only make a rough Bayesian estimate of the lens system masses and brightness. We find host star and planet masses of M{sub L1}=0.35{sub −0.20}{sup +0.30} M{sub ⊙}, M{sub L2}=0.10{sub −0.06}{sup +0.09} M{sub ⊙}, and m{sub p}=144{sub −82}{sup +126} M{sub ⊕}, and the K-band magnitude of the combined brightness of the host stars is K{sub L}=19.7{sub −1.0}{sup +0.7}. The separation between the lens and source system will be ∼90 mas in mid-2020, so it should be possible to detect the host system with follow-up adaptive optics or Hubble Space Telescope observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

CoDCon Project (Final Report)

The co-decontamination (CoDCon) project was established in FY 2016 with the objectives of (a) evaluating the uncertainty in the uranium (U)/plutonium (Pu) ratio in a mixed U/Pu product from a tributyl phosphate (TBP)–based solvent extraction flowsheet, and (b) developing and demonstrating on-line optical spectroscopy for real-time monitoring of key components (e.g., Pu, U, and HNO 3 concentrations) in the process solutions. We were interested in assessing the accuracy and precision to which a specific uranium-to-plutonium (U/Pu) ratio can be achieved, which for the purposes of this project was set at a U/Pu mass ratio of 7/3. The uncertainty associated with achieving this specific target U/Pu ratio was investigated during five flowsheet tests using laboratory-scale solvent extraction equipment. In addition, optical spectroscopic techniques were incorporated into the CoDCon solvent extraction testing system, allowing real time monitoring of all input and output process streams. Two CoDCon flowsheet tests were performed in FY 2018 using a simple dissolved fuel simulant containing only U (~1 M) and Pu (~15 mM) in nitric acid (HNO 3 ; ~3 M). In FY 2019, two additional flowsheet tests were performed. For the first of these (CoDCon Run 3), the dissolved fuel simulant was similar to that used in the first two tests, with the inclusion of 1 mM neptunium (Np). The second test conducted in FY 2019 (CoDCon Run 4) used a more representative dissolved fuel simulant, including addition of non-radioactive fission product elements. A fifth CoDCon flowsheet test (CoDCon Run 5) was conducted in FY 2020, with the following additional objectives: (1) routing of the technetium (Tc) in the simulated dissolved fuel solution to the solvent extraction raffinate, and (2) routing of the Np in the simulated dissolved fuel solution to the U/Pu product. All tests used a bank of sixteen 2 cm centrifugal contactors. The tests involved first loading the solvent (30 vol% TBP dissolved in n-dodecane) with U and Pu (and Np, for Run 5), then the Pu (and Np) was stripped from the loaded solvent with a U(IV) solution (~50 mM) and the flowsheet conditions were adjusted such that some U partitioned into the Pu-containing product stream. The amount of U accompanying the Pu was monitored in real time using optical spectroscopic techniques coupled with chemometric modeling. Based on the real-time spectroscopic measurement of the U/Pu ratio, adjustments were made to the flowrate of the fresh TBP solvent phase used to scrub U from the aqueous Pu-containing product. This proved to be a very effective way to control the U/Pu mass ratio in the product. This report presents the results of the CoDCon Run 5 test. The flowsheet tested in Run 5 was substantially different than that run in the prior tests, especially the solvent loading section of the flowsheet. Two key changes were made. First, based on the objective to extract all the Np and route it with the U/Pu product, pentavalent vanadium [V(V)] was added to the feed and scrub solutions. The purpose of the V(V) was to convert all the Np to the +6 oxidation state, which is extractable by TBP. Second, a high acid (8 M HNO 3 ) scrub was added to the flowsheet to scrub the Tc from the solvent. This was followed by a low acid scrub (0.05 M HNO 3 ) to reduce the residual HNO 3 concentration in the solvent prior to the Pu stripping step. The output from the low acid scrub was collected separately, rather than routing towards the raffinate. The modifications to the solvent loading part of the flowsheet were only partially successful. The treatment with V(V) was effective at converting the Np to Np(VI). Only 1.3% of the Np remained in the raffinate solution. However, ~40% of the Np stripped out of the solvent in the low acid scrub step; nearly 20% of the Pu also was stripped from the solvent during the low acid scrub. For further development, either modifications to the flowsheet, or concentration and recycle of the low acid stream into the

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Erratum: Monoenergetic photon-induced fission cross-section ratio measurements for U 235 , U 238 , and Pu 239 from 9.0 to 17.0 MeV

In this erratum we report a correction to the previously published photofission cross-section ratio data. The actinide fission-chamber foils utilized in this work were extensively characterized during a new campaign using α- and γ-ray spectroscopy, and 2π alpha counting. These three techniques agreed, resulting in an improved accuracy of the fission-chamber foil masses used in the original experiment. The foil masses measured by α spectroscopy are detailed in Table I. All foils were counted on the same α spectrometer, using an identical geometry, which reduces the systematic uncertainty in the calculated mass ratios since the α spectrometer efficiency cancels out in the ratio. This results in a relative uncertainty on the mass ratio of 1.0% for 235 U/ 238 U, 0.62% for 239 Pu/ 235 U, and 1.1% for 239 Pu/ 238 U. The published cross-section ratio data are re-calculated to reflect the updated target masses and uncertainties. The new mass values cause a 2.40% decrease for the σ( 235 U(γ, f)/ 238 U(γ, f)) ratio, a 5.10% decrease for the σ( 235 U(γ, f)/ 239 Pu(γ, f)) ratio, and a 2.77% decrease for the σ( 238 U(γ, f)/ 239 Pu(γ, f)) ratio. The updated cross-section ratios are presented in Tables II, III, and IV, which are corrected versions of Tables III, IV, and V in Ref. [1]

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Controlled dehumidification to extract clean water from a multicomponent gaseous mixture of organic contaminants

Rapid expansion of the unconventional oil and gas extraction has increased American energy independence, but also led to increased production of large amounts of contaminated water. Wastewater from the oil and gas industry contains a wide range of contaminants. Injecting such contaminated water into disposal wells or discharging it to the environment jeopardizes freshwater resources. Conventional and membrane-based wastewater treatment techniques are often not effective choices to treat highly contaminated wastewater; however, a suitable way to remove contaminants from wastewater is to selectively separate water in a process analogous to humidification-dehumidification (HDH). Only a few studies have investigated the use of HDH for wastewater treatment. In this study, a novel HDH system is introduced for treating highly contaminated water, such as oil and gas flowback and produced water. In this HDH process, a non-condensable gas, such as air, mixes with wastewater vapor to facilitate the separation of contaminants. As a result, clean water condenses from the multicomponent gaseous mixture while air carries organic contaminants out of the dehumidification section. A laboratory apparatus was constructed and experiments were performed to investigate the HDH process for wastewater treatment and to study the effects of flow dynamics including air flow rate on the composition of treated water. Different contaminants including benzene, toluene, 2-propanol and 2-butoxyethanol were tested. Experimental results showed that the system can be successfully applied for removing volatile and/or toxic organic contaminants from wastewater. A representative multicomponent mixture of fracking wastewater was successfully treated using the experimental setup and clean water with quality of 98.3% was obtained. It was revealed that increasing the air-to-vapor mass ratio improves purity of treated water. Quantitative analysis showed that by increasing the air-to-vapor mass ratio from 0.6 to 5.9, the fraction of separated 2-propanol through the air was improved from 43% to more than 96% of the initial amount. ASPEN software was employed to simulate equilibrium conditions. Finally, experimental results were observed to have lower mass fraction of residual contaminant in the treated water compared to equilibrium state.

42 ENGINEERING↗
DOE OSTI2022

Using the Black Carbon Particle Mixing State to Characterize the Lifecycle of Biomass Burning Aerosols

The lifecycle of black carbon (BC)-containing particles from biomass burns is examined using aircraft and surface observations of BC mixing state for plume ages from ~15 minutes to 10 days. Because BC is non-volatile and chemically inert, changes in the mixing state of BC-containing particles are driven solely by changes in particle coating, which is mainly secondary organic aerosol (SOA). The coating mass initially increases rapidly (k = 0.84 hr-1), then remains growth relatively constant for 1 to 2 days as plume dilution no longer supports further growth, then decreases slowly until only ~30 % of the maximum coating mass remains after 10 days, (kloss = 0.011 hr-1). The mass ratio of coating-to-core for a BC-containing particle with a 100 nm mass- equivalent diameter BC core reaches a maximum of ~20 after a few hours and drops to ~5 after 10 days of aging. The initial increase in coating mass can be used to determine SOA formation rates. The slow loss of coating material, not captured in global models, comprises the dominant fraction of the lifecycle of these particles. Coating-to-core mass ratios of BC particles in the stratosphere are much greater than those in the free troposphere indicating a different lifecycle.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

OGLE-2015-BLG-1670Lb: A Cold Neptune beyond the Snow Line in the Provisional WFIRST Microlensing Survey Field

We present the analysis of the microlensing event OGLE-2015-BLG-1670, detected in a high-extinction field very close to the Galactic plane. Due to the dust extinction along the line of sight, this event was too faint to be detected before it reached the peak of magnification. The microlensing light-curve models indicate a high-magnification event with a maximum of A(max)≳ 200, very sensitive to planetary deviations. An anomaly in the light curve has been densely observed by the microlensing surveys MOA, KMTNet, and OGLE. From the light-curve modeling, we find a planetary anomaly characterized by a planet-to-host mass ratio, q=(1.00 (sup+0.18, sub -0.16) x 10(exp -4), at the peak recently identified in the mass-ratio function of microlensing planets. Thus, this event is interesting to include in future statistical studies about planet demography. We have explored the possible degeneracies and find two competing planetary models resulting from the s ↔ 1/s degeneracy. However, because the projected separation is very close to s = 1, the physical implications for the planet for the two solutions are quite similar, except for the value of s. By combining the light-curve parameters with a Galactic model, we have estimated the planet mass M(2)=17.9(sup +9.6,sub-8.8)M(ꚛ) and the lens distance D(L) = 6.7(sup +1.0, sub -1.3) kpc, corresponding to a Neptune-mass planet close to the Galactic bulge. Such events with a low absolute latitude (|b| ≈1ᵒ.1) are subject to both high extinction and more uncertain source distances, two factors that may affect the mass measurements in the provisional Wide Field Infrared Survey Telescope fields. More events are needed to investigate the potential trade-off between the higher lensing rate and the difficulty in measuring masses in these low-latitude fields.

Clément Ranc↗
NASA NTRS1989

Radial velocity studies and absolute parameters of contact binaries. II - OO Aquilae

New high-precision radial velocities of the contact binary OO Aql have been obtained using the cross-correlation technique. The orbital elements have been corrected for proximity effects, using an analysis of published light curves of the system. The spectroscopically determined mass ratio of 0.843 is in excellent agreement with the photometrically determined value. OO Aql thus has one of the largest mass ratios observed for a contact binary. In contrast to almost all other contact binaries of G spectral type, the primary minimum is due to a transit by the less massive component, and thus the system is classified as an A-type contact binary. Absolute parameters are determined for OO Aql, which indicate that the primary component, although similar to the Sun in mass, is significantly more evolved. An age of about 8 Gyr and a metal abundance of one-half that of the Sun are determined. It seems that the system may have only recently evolved into contact, as suggested by Mochnacki, and that it is an important object for studies of the structure and evolution of contact binaries.

Hrivnak, Bruce J.↗
NASA NTRS1995

Hydrodynamics of binary coalescence. 2: Polytropes with gamma = 5/3

We present a new numerical study of the equilibrium and stability properties of close binary systems. We use the smoothed-particle hydrodynamics (SPH) technique both to construct accurate equilibrium configurations in three dimensions and to follow their hydrodynamic evolution. We adopt a simple polytropic equation of state p = K(sub rho)(exp gamma) with gamma = 5/3 and K = constant within each star, applicable to low-mass degenerate dwarfs as well as low-mass main-sequence stars. For degenerate configurations, we set the two polytropic constants equal, K = K prime, independent of the mass ratio. For main-sequence stars, we adjust K and K prime so as to obtain a simple mass-radius relation of the form R/R prime = M/M prime, where R prime and M prime are the radius and mass of the secondary. Along a sequence of binary equilibrium configurations for two identical stars, we demonstrate the existence of both secular and dynamical instabilities, confirming directly the results of recent analytic work. We use the SPH method to calculate the nonlinear development of the dynamical instability and to determine the final fate of the system. We find that the two stars merge together into a single, rapidly rotating object in just a few orbital periods. Equilibrium sequences are also constructed for systems containing two nonidentical stars. These sequences terminate at a Roche limit, which we can determine very accurately using SPH. For two low-mass main-sequence stars with mass ratio q approximately less than 0.4 we find that the (synchronized) Roche limit configuration is secularly unstable. We discuss the implications of our results for the evolution of double white-dwarf systems and W Ursae Majoris binaries.

Rasio, Frederic A.↗
NASA NTRS2007

Investigation and Comparison between New Satellite Impact Test Results and NASA Standard Breakup Model

This paper summarizes two new satellite impact tests conducted in order to investigate on the outcome of low- and hyper-velocity impacts on two identical target satellites. The first experiment was performed at a low velocity of 1.5 km/s using a 40-gram aluminum alloy sphere, whereas the second experiment was performed at a hyper-velocity of 4.4 km/s using a 4-gram aluminum alloy sphere by two-stage light gas gun in Kyushu Institute of Technology. To date, approximately 1,500 fragments from each impact test have been collected for detailed analysis. Each piece was analyzed based on the method used in the NASA Standard Breakup Model 2000 revision. The detailed analysis will conclude: 1) the similarity in mass distribution of fragments between low and hyper-velocity impacts encourages the development of a general-purpose distribution model applicable for a wide impact velocity range, and 2) the difference in area-to-mass ratio distribution between the impact experiments and the NASA standard breakup model suggests to describe the area-to-mass ratio by a bi-normal distribution.

Sakuraba, K.↗
DOE OSTI2020

Soils' dirty little secret: Depth–based comparisons can be inadequate for quantifying changes in soil organic carbon and other mineral soil properties

Quantifying changes in soil organic carbon (SOC) stocks and other soil properties is essential for understanding how soils will respond to land management practices and global change. Although they are widely used, comparisons of SOC stocks at fixed depth (FD) intervals are subject to errors when changes in bulk density or soil organic matter occur. The equivalent soil mass (ESM) method has been recommended in lieu of FD for assessing changes in SOC stocks in mineral soils, but ESM remains underutilized for SOC stocks and has rarely been used for other soil properties. In this paper, we draw attention to the limitations of the FD method and demonstrate the advantages of the ESM approach. We provide illustrations to show that the FD approach is susceptible to errors not only for quantifying SOC stocks but also for soil mass-based properties such as SOC mass percent, C:N mass ratio, and δ 13 C. Here we describe the ESM approach and show how it mitigates the FD method limitations. Using bulk density change simulations applied to an empirical dataset from bioenergy cropping systems, we show that the ESM method provides consistently lower errors than FD when quantifying changes in SOC stocks and other soil properties. To simplify the use of ESM, we detail how the method can be integrated into sampling schemes, and we provide an example R computer script that can perform ESM calculations on large datasets. We encourage future studies, whether temporal or comparative, to utilize sampling methods that are amenable to the ESM approach. Overall, we agree with previous recommendations that ESM should be the standard method for evaluating SOC stock changes in mineral soils, but we further suggest that ESM may also be preferred for comparisons of other soil properties including mass percentages, elemental mass ratios, and stable isotope composition.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2023

Kmt-2022-Blg-0440lb: A New q < 10 −4 Microlensing Planet With the Central-Resonant Caustic Degeneracy Broken

We present the observations and analysis of a high-magnification microlensing planetary event, KMT-2022-BLG-0440, for which the weak and short-lived planetary signal was covered by both the KMTNet survey and follow-up observations. The binary-lens models with a central caustic provide the best fits, with a planet/host mass ratio, q = 0.75–1.00 ×10 −4 at 1 σ. The binary-lens models with a resonant caustic and a brown-dwarf mass ratio are both excluded by ∆χ 2 > 70. The binary-source model can fit the anomaly well but is rejected by the ‘colour argument’ on the second source. From Bayesian analyses, it is estimated that the host star is likely a K or M dwarf located in the Galactic disc, the planet probably has a Neptune-mass, and the projected planet-host separation is 1.9 +0.6 −0.7 or 4.6 +1.4 −1.7 au, subject to the close/wide de generac y. This is the third q < 10 −4 planet from a high-magnification planetary signal ( A ≳ 65). Together with another such planet, KMT-2021-BLG-0171Lb, the ongoing follow-up program for the KMTNet high-magnification events has demonstrated its ability to detect high-magnification planetary signals for q < 10 −4 planets, which are challenging for the current microlensing surveys.

planets and satellites: detection↗
NASA NTRS1978

The Ca II V/R ratio and mass loss

High-dispersion coude spectrograms of 181 MK standards of types early F through late M, including luminosity classes Ia, Ib, II, and III, are analyzed. It is shown that the brightness ratio of the V and R self-reversed emission peaks (denoted V/R) in the center of the Ca II K line is correlated with spectral type as well as with certain other spectral-type and luminosity-sensitive parameters, including indicators of mass loss and the H-K wing emission lines. The observations indicate that V/R varies smoothly from less than unity in late K and M giants to greater than unity for G giants. This trend appears to be true for bright giants as well but not necessarily for supergiants and seems to hold for the average V/R for a given star, although short-term variations in V/R occur. It is suggested that the V/R values, which can be interpreted in terms of atmospheric motions, may indirectly relate to effects of evolutionary changes in stellar structure and that V/R among late-type stars could be useful as an indicator of both chromospheric activity and the state of stellar evolution.

Stencel, R. E.↗
DOE OSTI2024

Conservative scattering of Reissner-Nordström black holes at third post-Minkowskian order

Using a recently developed effective field theory formalism for extreme mass ratios arXiv:2308.14832, we present a calculation of charged black hole scattering at third post-Minkowskian order. The charges and masses are kept arbitrary, and the result interpolates from the scattering of Schwarzschild to extremal charged black holes, and beyond to charged particles in electrodynamics — agreeing with previously reported results in all such limits. The computation of the radial action is neatly organized in powers of the mass ratio. The probe (0SF) contributions are readily computed by direct integration of the radial momentum, and we use the effective field theory to compute the subleading (1SF) contributions via background-field Feynman rules supplemented by an operator encoding recoil of the background. Together these contributions completely determine the conservative physics at order O (G 3 ). .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Solubility Testing to Support the Addition of Sodium Reactor Experiment Material to Sludge Batch 10

The Savannah River Site H-Canyon Facility is planning to discard dissolved Sodium Reactor Experiment (SRE) material into Tank 51 prior to Sludge Batch 10 (SB10). SB10 with the SRE material will be processed in the Defense Waste Processing Facility (DWPF) using the Nitric-Glycolic Acid (NGA) flowsheet. The DWPF Nuclear Criticality Safety Evaluation (NCSE) protects a 14:1 mass ratio of manganese to equivalent uranium-235 in both the solid and liquid phases during processing by requiring a 70:1 mass ratio in the feed. A concern was raised that freshly precipitated manganese in the SRE material will behave differently from the manganese in sludge during DWPF processing and potentially invalidate the criticality control. To mitigate risks to the DWPF criticality controls, the Savannah River National Laboratory (SRNL) performed a metals solubility test applicable to recently precipitated manganese and uranium, as would be expected with SRE transfers to SB10. The objective of this analysis is the tracking of partitioning of the primary fissile component (uranium-235) with the credited poison (manganese) between the aqueous and insoluble phases.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1993

Ginga observations of the Coma cluster and studies of the spatial distribution of iron

The large area counters on the Japanese satellite Ginga have been used to determine the X-ray spectrum from the central region of the Coma cluster of galaxies over the energy range from 1.5 to 20 keV. The spectrum is well represented by an isothermal model of temperature 8.21 +/- 0.16 keV and a heavy element (iron) abundance of 0.212 +/- 0.027, relative to the cosmic value. The Ginga spectrum was found to be consistent with the X-ray spectra from the Tenma and EXOSAT satellites for a large class of nonisothermal temperature distributions. The measured iron elemental abundances were used to set a lower limit on the total mass of iron in Coma under the assumption that the iron is not distributed uniformly throughout the cluster. The mass ratio of iron relative to hydrogen (within 2 Mpc) is not less than 18 percent of the cosmic iron to hydrogen mass ratio. This compares to an average abundance of 24 percent if the iron is distributed uniformly. We discuss these results in terms of models for the production of iron in galaxy clusters.

Hughes, John P.↗
DOE OSTI2020

Characteristics of Uranium-Plutonium Mixed Oxide Nondestructive Assay Standards

A set of six well-characterized, homogeneous, mixed HEU-WGPu oxide standards has been manufactured for and are proposed for qualification as NDA working reference standards with SAFE-NMCA. These standards, if approved, will provide the basis for qualifying the FRAM isotopic systems for use in accountability measurements of 235U in the presence of Pu for unknown mixed U-Pu items by nondestructive assay. The U to Pu elemental mass ratios of the six analytical standards are nominally in the proportions 0.1, 0.25, 1.0, 2.5, 10, and 20; these values were chosen to span the U/Pu mass ratios of inventory items that ultimately will be measured by nondestructive assay and which currently reside in long term storage. The measured characteristics, including plutonium and uranium elemental masses and isotopic distribution, of each standard and relevant source documentation are reported here.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗