SEARCH · Search NASA

Results for “MATERIALS - TEMPERATURES, HIGH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Insight into the Fast-Rechargeability of a Novel Mo 1.5 W 1.5 Nb 14 O 44 Anode Material for High-Performance Lithium-Ion Batteries

Wadsley–Roth phased niobates are promising anode materials for lithium-ion batteries, while their inherently low electrical conductivity still limits their rate-capability. Herein, a novel doped Mo 1.5 W 1.5 Nb 14 O 44 (MWNO) material is facilely prepared via an ionothermal-synthesis-assisted doping strategy. The detailed crystal structure of MWNO is characterized by neutron powder diffraction and aberration corrected scanning transmission electron microscope, unveiling the full occupation of Mo 6+ -dopant at the t1 tetrahedral site. In half-cells, MWNO exhibits enhanced fast-rechargeability. In this work, the origin of the improved performance is investigated by ultraviolet–visible diffuse reflectance spectroscopy, density functional theory (DFT) computation, and electrochemical impedance spectroscopy, revealing that bandgap narrowing improves the electrical conductivity of MWNO. Furthermore, operando X-ray diffraction elucidates that MWNO exhibits a typical solid-solution phase conversion-based lithium-ion insertion/extraction mechanism with reversible structural evolution during the electrochemical reaction. The boosted lithium-ion diffusivity of MWNO, due to the Mo 6+ /W 6+ doping effect, is confirmed by a galvanostatic intermittent titration technique and DFT. With the simultaneously enhanced electrical conductivity and lithium-ion diffusivity, MWNO successfully demonstrates its fast-rechargeability and practicality in the LiNi 0.5 Mn 1.5 O 4 -coupled full-cells. Therefore, this work illustrates the potential of ionothermal synthesis in energy storage materials and provides a mechanistic understanding of the doping effect on improving material's electrochemical performance.

25 ENERGY STORAGE↗

DOE OSTI2022

Identification of high-dielectric constant compounds from statistical design

Abstract The discovery of high-dielectric materials is crucial to increasing the efficiency of electronic devices and batteries. Here, we report three previously unexplored materials with very high dielectric constants (69 < ϵ < 101) and large band gaps (2.9 < E g (eV) < 5.5) obtained by screening materials databases using statistical optimization algorithms aided by artificial neural networks (ANN). Two of these new dielectrics are mixed-anion compounds (Eu 5 SiCl 6 O 4 and HoClO) and are shown to be thermodynamically stable against common semiconductors via phase diagram analysis. We also uncovered four other materials with relatively large dielectric constants (20 < ϵ < 40) and band gaps (2.3 < E g (eV) < 2.7). While the ANN training-data are obtained from the Materials Project, the search-space consists of materials from the Open Quantum Materials Database (OQMD)—demonstrating a successful implementation of cross-database materials design. Overall, we report the dielectric properties of 17 materials calculated using ab initio calculations, that were selected in our design workflow. The dielectric materials with high-dielectric properties predicted in this work open up further experimental research opportunities.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Advanced Material Studies for High Intensity Proton Production Targets and Windows

The titanium alloy Ti6Al4V is widely used in accelerator facilities as beam windows, which are exposed to high cycle compressive stress waves from intense pulsed proton beams. Such materials interacting with the beam are subject to various forms of radiation damage, which can adversely affect their endurance limit. However, no fatigue data is currently available for high energy proton irradiated titanium alloy. Due to limitations in proton irradiation facilities, only miniature flat samples can be used for irradiation. To address this issue, we have developed a custom-made bend fatigue tester at Fermilab specifically for testing proton irradiated titanium alloy. In this presentation, we report on the fatigue test results obtained from this custom-fatigue tester using a non-ASTM standard specimen design. We plan to validate these sparse fatigue data with ASTM standard samples using standard fatigue samples. Furthermore, we have modified another commercial bend fatigue tester to accommodate miniature samples, and discuss some inherent deficiencies of the commercial fatigue tester to test miniature samples. To overcome this issue, a new fixture design is presented, which enables satisfactory fatigue testing on miniature samples over long periods. Finally, we present an upgrade to the custom-fatigue tester, featuring this new fixture design.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

Advanced Material Studies for High Intensity Proton Production Targets and Windows

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Multi-functional cementitious materials with ultra-high damage tolerance and self-sensing ability

Cementitious materials having high damage tolerance and self-sensing ability are described herein. These materials may replace conventional concrete to serve as a major material component for infrastructure systems with greatly improved resistance to cracking, reinforcement corrosion, and other common deterioration mechanisms under service conditions, and prevents fracture failure under extreme events. These materials can also be used for the repair, retrofitting or rehabilitation of existing concrete structures or infrastructure systems. Furthermore, these materials may offer capacity for distributed and direct sensing of cracking, straining and deterioration with spatially continuous resolution wherever the material is located, without relying on installation of sensors. The present invention relates to multifunctional cementitious structural or infrastructure materials that integrate self-sensing with damage tolerance for improving safety, extending service life, and health monitoring of structures, components, and infrastructure systems.

Li, Mo↗

DOE OSTI2024

Beneficial Use of Harvested Ponded Fly Ash and Landfilled FGD Materials for High-Volume Surface Mine Reclamation

The overall motivation of this project was to demonstrate at laboratory, bench-scale, and full-scale demonstration levels that (a) coal ash surface impoundments can go through closure by removal as per USEPA and state regulations so that the material can be used as is (other than draining free water using CCRs piles) in high-volume beneficial applications, (b) FGD material from closed out FGD facilities can be excavated and recompacted for coal mine reclamation, and (c) harvested CCRs can be beneficially utilized (providing a net environmental gain) in large-volumes for reclamation at abandoned coal mine sites across the US, especially in the Eastern and Midwest coal mining regions. The objectives of this project were to: 1) promote the safe and cost-effective closure by removal of coal ash impoundments, 2) harvest landfilled FGD, and 3) promote the high-volume beneficial use of these harvested CCRs in the reclamation of abandoned surface coal mine sites across the eastern and midwestern coal mining regions of the United States. The major tasks carried out for this project are summarized below: 1) Conesville Full-Scale Demonstration Project: About 2 million tons of harvested CCR materials from the closure by removal of an inactive fly ash pond and an adjacent old FGD landfill were used for the full-scale demonstration project to fully reclaim a nearby partially completed abandoned surface coal mine. Site monitoring for the project duration was carried out and results are discussed. 2) Laboratory Testing: Geotechnical and environmental testing of harvested ponded fly ash and landfilled FGD material at the former Conesville power plant were carried out. Completing the laboratory testing allowed for QA/QC for the full-scale site construction and informed the formulation of the risk analysis. 3) Risk Analysis: We developed a reliable computational model for fate and transport. We used these models and the rich set of monitored data for the Conesville site to analyze risks to human health and ecological risks associated with high-volume surface mine reclamation using harvested CCRs. 4) GIS Siting Study: A Geographic Information System (GIS) study was carried out for three states in the Eastern coal mining region and two states in the Midwest coal region. This effort provided site specific GIS information for five states and allowed us to establish protocols that other states can follow in implementing their own state specific GIS study.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2023

Exploitation of Defects in High Entropy Ceramic Barrier Materials

A critical mission need exists to develop new materials that can withstand extreme environments and multiple sequential threats. High entropy materials, those containing 5 or more metals, exhibit many exciting properties which would potentially be useful in such situations. However, a particularly hard challenge in developing new high entropy materials is determining a priori which compositions will form the desired single phase material. The project outlined here combined several modeling and experimental techniques to explore several structure-property-relationships of high entropy ceramics in an effort to better understand the connection between their compositional components, their observed properties, and stability. We have developed novel machine learning algorithms which rapidly predict stable high entropy ceramic compositions, identified the stability interplay between configurational entropy and cation defects, and tested the mechanical stability of high entropy oxides using the unique capabilities at the Dynamic Compression Sector facility and the Saturn accelerator.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Composite electrodes and methods of making the same

Disclosed herein is a composite electrode comprising a charge-conducting material, a charge-providing material bound to the charge-conducting material, and a plurality of single-walled carbon nanotubes bound to a surface of the charge-providing material. High-capacity electroactive materials that assure high performance are a prerequisite for ubiquitous adoption of technologies that require high energy/power density lithium (Li)-ion batteries, such as smart Internet of Things (IoT) devices and electric vehicles (EVs). Improved electrode performance and lifetimes are desirable. The disclosed electrode can have a Coulombic efficiency of 99% or greater, and a stable capacity retention after 100 cycles or more. Also disclosed herein are methods of making a composite electrode.

Kwon, Yo-Han↗

DOE OSTI2021

Supramolecular Self-Assembled Multi-Electron-Acceptor Organic Molecule as High-Performance Cathode Material for Li-Ion Batteries

Organic electrode materials possess many advantages such as low toxicity, sustainability, and chemical/structural tunability toward high energy density. However, to compete with inorganic-based compounds, crucial aspects such as redox potential, capacity, cycling stability, and electronic conductivity need to be improved. Herein, a comprehensive strategy on the molecular design of small organic electron-acceptor-molecule—hexaazatrianthranylene (HATA) embedded quinone (HATAQ) is reported. By introducing conjugated quinone moieties into the electron-deficient hexaazatriphenylene-derivative core, HATAQ with highly extended π-conjugation can yield extra-high capacity for lithium storage, delivering a capacity of 426 mAh g -1 at 200 mA g -1 (0.4C). At an extremely high rate of 10 A g -1 (19C), a reversible capacity of 209 mAh g -1 corresponding to nearly 85% retention is obtained after 1000 cycles. A unique network of unconventional lock-and-key hydrogen bonds in the solid-state facilitates favorable supramolecular 2D layered arrangement, enhancing cycling stability. To the best of the authors’ knowledge, the capacity and rate capability of HATAQ are found to be the best ever reported for organic small-molecule-based cathodes. Finally, these results together with density functional theory studies provide proof-of-concept that the design strategy is promising for the development of organic electrodes with exceptionally high energy density, rate capability, and cycling stability.

25 ENERGY STORAGE↗

DOE OSTI2021

Noncured Graphene Thermal Interface Materials for High-Power Electronics: Minimizing the Thermal Contact Resistance

We report on experimental investigation of thermal contact resistance, RC, of the noncuring graphene thermal interface materials with the surfaces characterized by different degree of roughness, Sq. It is found that the thermal contact resistance depends on the graphene loading, ξ, non-monotonically, achieving its minimum at the loading fraction of ξ ~15 wt%. Decreasing the surface roughness by Sq~1 μm results in approximately the factor of ×2 decrease in the thermal contact resistance for this graphene loading. The obtained dependences of the thermal conductivity, KTIM, thermal contact resistance, RC, and the total thermal resistance of the thermal interface material layer on ξ and Sq can be utilized for optimization of the loading fraction of graphene for specific materials and roughness of the connecting surfaces. Our results are important for the thermal management of high-power-density electronics implemented with diamond and other wide-band-gap semiconductors.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Valuation of Anode Materials for High-Performance Lithium Batteries: From Graphite to Lithium Metal and Beyond

Lithium-ion batteries have revolutionized energy storage, yet advanced technologies such as electric vehicles and eVTOLs demand even higher performance and safety. Anodes, the negative electrodes, are crucial in enhancing batteries’ safety, lifespan, and fast-charging capabilities. This review paper comprehensively evaluates the progression of anode materials from traditional graphite to advanced anodes like lithium metal. Graphite anodes, with a capacity of 372 mAh g −1 , enabled the first commercial lithium-ion batteries, but future applications require higher energy densities and fast-charging capabilities. Emerging anode materials, including alloying, and conversion types, as well as lithium metal, offer significantly higher capacities, with lithium metal offering a theoretical capacity of 3 860 mAh g −1 . However, these advanced anodes face challenges such as volume expansion, high surface reactivity, sluggish Li+ kinetics, and unstable lithium deposition morphologies. Here, this review critically examines the electrochemical performance, interfacial properties, mechanical attributes, and stability issues of various anode materials. It further discusses solid electrolyte interphase (SEI) formation, strategies for enhancing interface stability, and the requirements of anodes for solid-state batteries. Additionally, the review explores potential solutions for limitations with each anode type, highlights innovative anode-free architectures, and evaluates the current and future trends of battery anode industries. Ultimately, this paper aims to guide the development of high-performance anode materials, paving the way for the next generation of efficient, reliable lithium batteries.

Alloying anodes↗

DOE OSTI2021

Planarization, densification, and exfoliation of porous materials by high-energy ion beams

A method and system for providing at least one of planarization, densification, and exfoliation of a porous material using ion beams. The method may use an ion beam generator to generate an ion beam, the ion beam having energy above 0.1 MeV. The ion beam generator may irradiate the surface of a porous material with the ion beam to produce at least one of planarization, densification, and exfoliation of the porous material.

Kucheyev, Sergei O.↗

DOE OSTI2020

Recovery of High Value Anode Materials for a Closed Loop Li-ion Battery Recycling Process (Final Report)

Battery Resourcers’ goal with this Small Business Innovative Research Phase 1 project was to produce high quality and high purity graphite generated from its Li-ion battery recycling technology. Battery Resourcers’ technology recovers cathode material from a broad spectrum of Li-ion battery regardless of size, shape or chemistry. In Battery Resourcers existing model, the graphite is recovered to be used as a reductant and therefore the battery materials cost or recycling cost is not lowered by the recovery of the graphite. Currently, Battery Resourcers is piloting its lithium ion battery recycling process and the recovered LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC111) or LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC111) cathode materials have shown that they can outperform existing commercial NMC111 cathode materials while being produced at a projected lower cost. Battery Resourcers and its subcontractor WPI have demonstrated the same success with the recovered graphite for anode materials. The success of this award will enable Battery Resourcers offer lowest cost anode materials while reducing the carbon footprint of the battery industry. This will potentially lower the cost of EV by lowering the upfront cost of the battery and the end of life disposal costs. The technical objectives of this Phase 1 research project are to purify the recovered graphite from Battery Resourcers leaching process and demonstrate it is viable to be used in new electric vehicle lithium ion batteries. This project demonstrated that Battery Resourcers can recover graphite with less than 2% impurities. To separate the graphite from other materials Battery Resourcers will employed new filtering techniques and chemical processing methods.

25 ENERGY STORAGE↗

DOE OSTI2022

Potential high-performance magnet materials: Co- and Al-alloyed Sm 2 Fe 17

Sm 2 Fe 17 has long been known as a potential high-performance magnet whose deficiencies—planar anisotropy and lower-than-optimal T c —can be remedied by nitrogen addition, but which presents synthesis difficulties. In this work, we apply first-principles calculations to search for alternative low-cost, high-performance permanent magnets in this family, by exploring simultaneous Fe and Al substitution. Specifically, the goal is to improve properties of Sm 2 Fe 14 Al 3 easy-plane magnet at the stoichiometric composition. Density functional theory calculations were executed for three series of compounds, i.e., Sm 2 (Fe 1-x Co x ) 14 Al 3 , Sm 2 (Fe 1-x Co x ) 15 Al 2 , and Sm 2 (Fe 1-x Cox) 16 Al. We find that substitution of Fe with 12–18 of Co in % Sm 2 Fe 14 Al 3 modifies the magnetic anisotropy type from easy plane to easy axis with a substantial anisotropy of 7.1 MJ/m 3 . We also demonstrate that the largest part of magnetic anisotropy is introduced by 4f Sm atom electrons. Thus the rotation of magnetic moment orientation from $\langle$$1\bar10$$\rangle$ to $\langle$111$\rangle$ is followed by an increase of the occupied 4f state number and, as a result, the orbital part of the magnetic moment of one of the Sm atoms. This increase of the occupied 4f state number at an energy ~ -4.3 eV results in a significant reduction of band structure energy. The substitution of Fe by Co does not significantly reduce the magnetization of the compound and keeps it slightly above 1 T. This combination of magnetic anisotropy and magnetization makes the compound a promising candidate for a permanent magnet.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Characterization of Shallow, Undoped Ge/SiGe Quantum Wells Commercially Grown on 8-in. (100) Si Wafers

Hole spins in Ge quantum wells have shown success in both spintronic and quantum applications, thereby increasing the demand for high-quality material. We performed material analysis and device characterization of commercially grown shallow and undoped Ge/SiGe quantum well heterostructures on 8-in. (100) Si wafers. Material analysis reveals the high crystalline quality, sharp interfaces, and uniformity of the material. We demonstrate a high mobility (1.7 × 10 5 cm 2 V –1 s –1 ) 2D hole gas in a device with a conduction threshold density of 9.2 × 10 10 cm –2 . We study the use of surface preparation as a tool to control barrier thickness, density, mobility, and interface trap density. We report interface trap densities of 6 × 10 12 eV –1 . Our results validate the material’s high quality and show that further investigation into improving device performance is needed. We conclude that surface preparations which include weak Ge etchants, such as dilute H 2 O 2 , can be used for postgrowth control of quantum well depth in Ge-rich SiGe while still providing a relatively smooth oxide–semiconductor interface. Our results show that interface state density is mostly independent of our surface preparations, thereby implying that a Si cap layer is not necessary for device performance. Transport in our devices is instead limited by the quantum well depth. Commercially sourced Ge/SiGe, such as studied here, will provide accessibility for future investigations.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Ionothermally Synthesized Nanoporous Ti 0.95 W 0.05 Nb 2 O 7 : a Novel Anode Material for High-Performance Lithium-Ion Batteries

Although TiNb 2 O 7 is regarded as a fast-rechargeable lithium-ion battery (LIB) anode material, the intrinsic poor electrochemical kinetics of TiNb 2 O 7 still dramatically impedes its development. Herein, an ionothermal synthesis-assisted doping strategy is proposed for the preparation of a new W 6+ -doped TiNb 2 O 7 material (Ti 0.95 W 0.05 Nb 2 O 7 ) with nanoporous structure (denoted as NPTWNO). The improved Li + diffusion coefficient of NPTWNO suggests that the ionic-liquid-templated nanoporous architecture improves the Li+ diffusion kinetics. The density functional theory computational study reveals that the doped W 6+ successfully boosts the electronic conductivity due to the narrowed conduction-valance bandgap resulted from charge redistribution, which is reflected by the electrochemical impedance spectroscopy data. With the simultaneously enhanced Li+ diffusivity and electronic conductivity, NPTWNO achieves fast-rechargeability in LIBs. So this work indicates the potential of ionothermal synthesis-assisted doping strategy on energy storage materials and offers NPTWNO material with promising electrochemical performance.

25 ENERGY STORAGE↗

DOE OSTI2024

Developing Materials for High-Energy-Density Solid State Li-S Batteries

Solid-state lithium-sulfur batteries are considered to be the next-generation power source for vehicle applications due to their high energy density (up to 3 times more than current Li-ion) and low cost of sulfur (100 times less than conventional cobalt oxide). However, issues with solid-state electrolyte stability, conduction pathways in the sulfur cathode, and the interface between solid-state electrolyte and sulfur cathode must be solved in order to allow commercialization. This project demonstrates the creation of new, advanced materials which overcome these inherent issues. Current approaches based on polymer or liquid electrolyte with additives have been able to improve stability at the cost of efficiency. In contrast, by creating new hybrid materials it is possible to achieve both stability and efficiency. We developed a novel sulfide-based solid electrolyte, a sulfur-carbon composite cathode, and explored various additives to stabilize the interface of solid electrolyte and cathode. After the desired properties were achieved, these materials were integrated into a high-performance solid-state battery, bringing low-cost high-energy solid-state lithium-sulfur batteries one step closer to reality.

25 ENERGY STORAGE↗

DOE OSTI2023

Parallel Implicit Hydrodynamics with Material Strength for High Explosive Burn Calculations

High explosives are almost always evolving in some form of metal containment vessel. This fact requires that a materials model for the evolution of the metal containment vessel be part of any simulation of the HE. Since the actual form of the strength model to be used is an open question, we incorporate the material strength properties in a relatively agnostic fashion, which will accommodate many strength models. The only restriction is that the stress components be a function of density, specific internal energy and velocities. In addition, the timescales and rates of the chemical reactions in the HE vary between thousands of seconds and nanoseconds. A hydrodynamics capable of operating in anticipation of the eventual violent release of energy via these chemical reactions is a necessity. The central issue in creating a hydrodynamics capable of spanning these timescales is to forgo the use of a Courant time step control necessary in an explicit hydrodynamics. The Courant time-step arises because of characteristic velocities associated with the material, such as the sound speed or, in materials with strength, characteristic longitudinal and transverse speeds associated with compression and shear. The method used to circumvent the need for a Courant time-step limit is to develop an implicit calculation of the advanced particle pressure and shear modulus derived from the conservation laws of mass, momentum and specific internal energy. This process creates the implicit hydrodynamics needed for the HE calculations of interest to this study.

36 MATERIALS SCIENCE↗